1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
|
/* linux/arch/arm/mach-s3c2412/s3c2412.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://armlinux.simtec.co.uk/.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
#include <plat/s3c2412.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
static inline void s3c2412_init_gpio2(void)
{
s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
}
#else
#define s3c2412_init_gpio2() do { } while(0)
#endif
/* Initial IO mappings */
static struct map_desc s3c2412_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
{
.virtual = (unsigned long)S3C2412_VA_SSMC,
.pfn = __phys_to_pfn(S3C2412_PA_SSMC),
.length = SZ_1M,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)S3C2412_VA_EBI,
.pfn = __phys_to_pfn(S3C2412_PA_EBI),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
/* uart registration process */
void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
/* rename devices that are s3c2412/s3c2413 specific */
s3c_device_sdi.name = "s3c2412-sdi";
s3c_device_lcd.name = "s3c2412-lcd";
s3c_nand_setname("s3c2412-nand");
/* alter IRQ of SDI controller */
s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
/* spi channel related changes, s3c2412/13 specific */
s3c_device_spi0.name = "s3c2412-spi";
s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
s3c_device_spi1.name = "s3c2412-spi";
s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
}
/* s3c2412_idle
*
* use the standard idle call by ensuring the idle mode
* in power config, then issuing the idle co-processor
* instruction
*/
static void s3c2412_idle(void)
{
unsigned long tmp;
/* ensure our idle mode is to go to idle */
tmp = __raw_readl(S3C2412_PWRCFG);
tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
__raw_writel(tmp, S3C2412_PWRCFG);
cpu_do_idle();
}
static void s3c2412_hard_reset(void)
{
/* errata "Watch-dog/Software Reset Problem" specifies that
* this reset must be done with the SYSCLK sourced from
* EXTCLK instead of FOUT to avoid a glitch in the reset
* mechanism.
*
* See the watchdog section of the S3C2412 manual for more
* information on this fix.
*/
__raw_writel(0x00, S3C2412_CLKSRC);
__raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
mdelay(1);
}
/* s3c2412_map_io
*
* register the standard cpu IO areas, and any passed in from the
* machine specific initialisation.
*/
void __init s3c2412_map_io(void)
{
/* move base of IO */
s3c2412_init_gpio2();
/* set our idle function */
s3c24xx_idle = s3c2412_idle;
/* set custom reset hook */
s3c24xx_reset_hook = s3c2412_hard_reset;
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
}
void __init_or_cpufreq s3c2412_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long tmp;
unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
/* now we've got our machine bits initialised, work out what
* clocks we've got */
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
clk_mpll.rate = fclk;
tmp = __raw_readl(S3C2410_CLKDIVN);
/* work out clock scalings */
hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
/* print brieft summary of clocks, etc */
printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2412_init_clocks(int xtal)
{
/* initialise the clocks here, to allow other things like the
* console to use them
*/
s3c24xx_register_baseclocks(xtal);
s3c2412_setup_clocks();
s3c2412_baseclk_add();
}
/* need to register class before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2412 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
struct sysdev_class s3c2412_sysclass = {
.name = "s3c2412-core",
};
static int __init s3c2412_core_init(void)
{
return sysdev_class_register(&s3c2412_sysclass);
}
core_initcall(s3c2412_core_init);
static struct sys_device s3c2412_sysdev = {
.cls = &s3c2412_sysclass,
};
int __init s3c2412_init(void)
{
printk("S3C2412: Initialising architecture\n");
register_syscore_ops(&s3c2412_pm_syscore_ops);
register_syscore_ops(&s3c24xx_irq_syscore_ops);
return sysdev_register(&s3c2412_sysdev);
}
|
