1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)
{
u32 tmp = __raw_readl(S3C_PCLK_GATE);
/* As a note, since the S3C64XX UARTs generally have multiple
* clock sources, we simply enable PCLK at the moment and hope
* that the resume settings for the UART are suitable for the
* use with PCLK.
*/
tmp |= S3C_CLKCON_PCLK_UART0;
tmp |= S3C_CLKCON_PCLK_UART1;
tmp |= S3C_CLKCON_PCLK_UART2;
tmp |= S3C_CLKCON_PCLK_UART3;
__raw_writel(tmp, S3C_PCLK_GATE);
udelay(10);
}
static inline void s3c_pm_arch_prepare_irqs(void)
{
/* VIC should have already been taken care of */
/* clear any pending EINT0 interrupts */
__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
}
static inline void s3c_pm_arch_stop_clocks(void)
{
}
static inline void s3c_pm_arch_show_resume_irqs(void)
{
}
/* make these defines, we currently do not have any need to change
* the IRQ wake controls depending on the CPU we are running on */
#define s3c_irqwake_eintallow ((1 << 28) - 1)
#define s3c_irqwake_intallow (~0)
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
{
u32 ucon = __raw_readl(regs + S3C2410_UCON);
u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
u32 new_ucon;
u32 delta;
/* S3C64XX UART blocks only support level interrupts, so ensure that
* when we restore unused UART blocks we force the level interrupt
* settigs. */
save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
/* We have a constraint on changing the clock type of the UART
* between UCLKx and PCLK, so ensure that when we restore UCON
* that the CLK field is correctly modified if the bootloader
* has changed anything.
*/
if (ucon_clk != save_clk) {
new_ucon = save->ucon;
delta = ucon_clk ^ save_clk;
/* change from UCLKx => wrong PCLK,
* either UCLK can be tested for by a bit-test
* with UCLK0 */
if (ucon_clk & S3C6400_UCON_UCLK0 &&
!(save_clk & S3C6400_UCON_UCLK0) &&
delta & S3C6400_UCON_PCLK2) {
new_ucon &= ~S3C6400_UCON_UCLK0;
} else if (delta == S3C6400_UCON_PCLK2) {
/* as an precaution, don't change from
* PCLK2 => PCLK or vice-versa */
new_ucon ^= S3C6400_UCON_PCLK2;
}
S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
ucon, new_ucon, save->ucon);
save->ucon = new_ucon;
}
}
static inline void s3c_pm_restored_gpios(void)
{
/* ensure sleep mode has been cleared from the system */
__raw_writel(0, S3C64XX_SLPEN);
}
static inline void samsung_pm_saved_gpios(void)
{
/* turn on the sleep mode and keep it there, as it seems that during
* suspend the xCON registers get re-set and thus you can end up with
* problems between going to sleep and resuming.
*/
__raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
}
|
