path: root/arch/blackfin/mach-bf533/include/mach/defBF532.h

/************************************************************************
 *
 * This file is subject to the terms and conditions of the GNU Public
 * License. See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Non-GPL License also available as part of VisualDSP++
 * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
 *
 * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
 *
 * This file under source code control, please send bugs or changes to:
 * dsptools.support@analog.com
 *
 ************************************************************************/
/*
 * File:         include/asm-blackfin/mach-bf533/defBF532.h
 * Based on:
 * Author:
 *
 * Created:
 * Description:
 *
 * Rev:
 *
 * Modified:
 *
 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.
 * If not, write to the Free Software Foundation,
 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */
/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */

#ifndef _DEF_BF532_H
#define _DEF_BF532_H

/* include all Core registers and bit definitions */
#include <asm/def_LPBlackfin.h>

/*********************************************************************************** */
/* System MMR Register Map */
/*********************************************************************************** */
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */

#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
#define PLL_DIV			 0xFFC00004	/* PLL Divide Register (16-bit) */
#define VR_CTL			 0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
#define CHIPID                 0xFFC00014       /* Chip ID Register */

/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
#define SWRST			0xFFC00100  /* Software Reset Register (16-bit) */
#define SYSCR			0xFFC00104  /* System Configuration registe */
#define SIC_RVECT             		0xFFC00108	/* Interrupt Reset Vector Address Register */
#define SIC_IMASK             		0xFFC0010C	/* Interrupt Mask Register */
#define SIC_IAR0               		0xFFC00110	/* Interrupt Assignment Register 0 */
#define SIC_IAR1               		0xFFC00114	/* Interrupt Assignment Register 1 */
#define SIC_IAR2              		0xFFC00118	/* Interrupt Assignment Register 2 */
#define SIC_ISR                		0xFFC00120	/* Interrupt Status Register */
#define SIC_IWR                		0xFFC00124	/* Interrupt Wakeup Register */

/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
#define WDOG_CTL                	0xFFC00200	/* Watchdog Control Register */
#define WDOG_CNT                	0xFFC00204	/* Watchdog Count Register */
#define WDOG_STAT               	0xFFC00208	/* Watchdog Status Register */

/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
#define RTC_STAT                	0xFFC00300	/* RTC Status Register */
#define RTC_ICTL                	0xFFC00304	/* RTC Interrupt Control Register */
#define RTC_ISTAT               	0xFFC00308	/* RTC Interrupt Status Register */
#define RTC_SWCNT               	0xFFC0030C	/* RTC Stopwatch Count Register */
#define RTC_ALARM               	0xFFC00310	/* RTC Alarm Time Register */
#define RTC_FAST                	0xFFC00314	/* RTC Prescaler Enable Register */
#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */

/* UART Controller (0xFFC00400 - 0xFFC004FF) */

/*
 * Because include/linux/serial_reg.h have defined UART_*,
 * So we define blackfin uart regs to BFIN_UART_*.
 */
#define BFIN_UART_THR			0xFFC00400	/* Transmit Holding register */
#define BFIN_UART_RBR			0xFFC00400	/* Receive Buffer register */
#define BFIN_UART_DLL			0xFFC00400	/* Divisor Latch (Low-Byte) */
#define BFIN_UART_IER			0xFFC00404	/* Interrupt Enable Register */
#define BFIN_UART_DLH			0xFFC00404	/* Divisor Latch (High-Byte) */
#define BFIN_UART_IIR			0xFFC00408	/* Interrupt Identification Register */
#define BFIN_UART_LCR			0xFFC0040C	/* Line Control Register */
#define BFIN_UART_MCR			0xFFC00410	/* Modem Control Register */
#define BFIN_UART_LSR			0xFFC00414	/* Line Status Register */
#if 0
#define BFIN_UART_MSR			0xFFC00418	/* Modem Status Register (UNUSED in ADSP-BF532) */
#endif
#define BFIN_UART_SCR			0xFFC0041C	/* SCR Scratch Register */
#define BFIN_UART_GCTL			0xFFC00424	/* Global Control Register */

/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
#define SPI0_REGBASE          		0xFFC00500
#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
#define SPI_STAT              		0xFFC00508	/* SPI Status register */
#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */

/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */

#define TIMER0_CONFIG          		0xFFC00600	/* Timer 0 Configuration Register */
#define TIMER0_COUNTER			0xFFC00604	/* Timer 0 Counter Register */
#define TIMER0_PERIOD       		0xFFC00608	/* Timer 0 Period Register */
#define TIMER0_WIDTH        		0xFFC0060C	/* Timer 0 Width Register */

#define TIMER1_CONFIG          		0xFFC00610	/*  Timer 1 Configuration Register   */
#define TIMER1_COUNTER         		0xFFC00614	/*  Timer 1 Counter Register         */
#define TIMER1_PERIOD          		0xFFC00618	/*  Timer 1 Period Register          */
#define TIMER1_WIDTH           		0xFFC0061C	/*  Timer 1 Width Register           */

#define TIMER2_CONFIG          		0xFFC00620	/* Timer 2 Configuration Register   */
#define TIMER2_COUNTER         		0xFFC00624	/* Timer 2 Counter Register         */
#define TIMER2_PERIOD          		0xFFC00628	/* Timer 2 Period Register          */
#define TIMER2_WIDTH           		0xFFC0062C	/* Timer 2 Width Register           */

#define TIMER_ENABLE			0xFFC00640	/* Timer Enable Register */
#define TIMER_DISABLE			0xFFC00644	/* Timer Disable Register */
#define TIMER_STATUS			0xFFC00648	/* Timer Status Register */

/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */

#define FIO_FLAG_D	       		0xFFC00700	/* Flag Mask to directly specify state of pins */
#define FIO_FLAG_C             		0xFFC00704	/* Peripheral Interrupt Flag Register (clear) */
#define FIO_FLAG_S             		0xFFC00708	/* Peripheral Interrupt Flag Register (set) */
#define FIO_FLAG_T			0xFFC0070C	/* Flag Mask to directly toggle state of pins */
#define FIO_MASKA_D            		0xFFC00710	/* Flag Mask Interrupt A Register (set directly) */
#define FIO_MASKA_C            		0xFFC00714	/* Flag Mask Interrupt A Register (clear) */
#define FIO_MASKA_S            		0xFFC00718	/* Flag Mask Interrupt A Register (set) */
#define FIO_MASKA_T            		0xFFC0071C	/* Flag Mask Interrupt A Register (toggle) */
#define FIO_MASKB_D            		0xFFC00720	/* Flag Mask Interrupt B Register (set directly) */
#define FIO_MASKB_C            		0xFFC00724	/* Flag Mask Interrupt B Register (clear) */
#define FIO_MASKB_S            		0xFFC00728	/* Flag Mask Interrupt B Register (set) */
#define FIO_MASKB_T            		0xFFC0072C	/* Flag Mask Interrupt B Register (toggle) */
#define FIO_DIR                		0xFFC00730	/* Peripheral Flag Direction Register */
#define FIO_POLAR              		0xFFC00734	/* Flag Source Polarity Register */
#define FIO_EDGE               		0xFFC00738	/* Flag Source Sensitivity Register */
#define FIO_BOTH               		0xFFC0073C	/* Flag Set on BOTH Edges Register */
#define FIO_INEN					0xFFC00740	/* Flag Input Enable Register  */

/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
#define SPORT0_RCR1      	 	0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_RCR2      	 	0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */

/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
#define SPORT1_TCR1     	 	0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_TCR2      	 	0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
#define SPORT1_RCR1      	 	0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_RCR2      	 	0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */

/* Asynchronous Memory Controller - External Bus Interface Unit  */
#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register */
#define EBIU_AMBCTL0			0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
#define EBIU_AMBCTL1			0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */

/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */

#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register */
#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register */
#define EBIU_SDRRC 			0xFFC00A18	/* SDRAM Refresh Rate Control Register */
#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register */

/* DMA Traffic controls */
#define DMA_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
#define DMA_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */

/* Alternate deprecated register names (below) provided for backwards code compatibility */
#define DMA_TCPER 0xFFC00B0C	/* Traffic Control Periods Register */
#define DMA_TCCNT 0xFFC00B10	/* Traffic Control Current Counts Register */

/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
#define DMA0_NEXT_DESC_PTR	0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
#define DMA0_START_ADDR		0xFFC00C04	/* DMA Channel 0 Start Address Register */
#define DMA0_X_COUNT		0xFFC00C10	/* DMA Channel 0 X Count Register */
#define DMA0_Y_COUNT		0xFFC00C18	/* DMA Channel 0 Y Count Register */
#define DMA0_X_MODIFY		0xFFC00C14	/* DMA Channel 0 X Modify Register */
#define DMA0_Y_MODIFY		0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
#define DMA0_CURR_DESC_PTR	0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
#define DMA0_CURR_ADDR		0xFFC00C24	/* DMA Channel 0 Current Address Register */
#define DMA0_CURR_X_COUNT	0xFFC00C30	/* DMA Channel 0 Current X Count Register */
#define DMA0_CURR_Y_COUNT	0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
#define DMA0_IRQ_STATUS		0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
#define DMA0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register */

#define DMA1_CONFIG		0xFFC00C48	/* DMA Channel 1 Configuration Register */
#define DMA1_NEXT_DESC_PTR	0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
#define DMA1_START_ADDR		0xFFC00C44	/* DMA Channel 1 Start Address Register */
#define DMA1_X_COUNT		0xFFC00C50	/* DMA Channel 1 X Count Register */
#define DMA1_Y_COUNT		0xFFC00C58	/* DMA Channel 1 Y Count Register */
#define DMA1_X_MODIFY		0xFFC00C54	/* DMA Channel 1 X Modify Register */
#define DMA1_Y_MODIFY		0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
#define DMA1_CURR_DESC_PTR	0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
#define DMA1_CURR_ADDR		0xFFC00C64	/* DMA Channel 1 Current Address Register */
#define DMA1_CURR_X_COUNT	0xFFC00C70	/* DMA Channel 1 Current X Count Register */
#define DMA1_CURR_Y_COUNT	0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
#define DMA1_IRQ_STATUS		0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
#define DMA1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register */

#define DMA2_CONFIG		0xFFC00C88	/* DMA Channel 2 Configuration Register */
#define DMA2_NEXT_DESC_PTR	0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
#define DMA2_START_ADDR		0xFFC00C84	/* DMA Channel 2 Start Address Register */
#define DMA2_X_COUNT		0xFFC00C90	/* DMA Channel 2 X Count Register */
#define DMA2_Y_COUNT		0xFFC00C98	/* DMA Channel 2 Y Count Register */
#define DMA2_X_MODIFY		0xFFC00C94	/* DMA Channel 2 X Modify Register */
#define DMA2_Y_MODIFY		0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
#define DMA2_CURR_DESC_PTR	0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
#define DMA2_CURR_ADDR		0xFFC00CA4	/* DMA Channel 2 Current Address Register */
#define DMA2_CURR_X_COUNT	0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
#define DMA2_CURR_Y_COUNT	0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
#define DMA2_IRQ_STATUS		0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
#define DMA2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register */

#define DMA3_CONFIG		0xFFC00CC8	/* DMA Channel 3 Configuration Register */
#define DMA3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
#define DMA3_START_ADDR		0xFFC00CC4	/* DMA Channel 3 Start Address Register */
#define DMA3_X_COUNT		0xFFC00CD0	/* DMA Channel 3 X Count Register */
#define DMA3_Y_COUNT		0xFFC00CD8	/* DMA Channel 3 Y Count Register */
#define DMA3_X_MODIFY		0xFFC00CD4	/* DMA Channel 3 X Modify Register */
#define DMA3_Y_MODIFY		0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
#define DMA3_CURR_DESC_PTR	0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
#define DMA3_CURR_ADDR		0xFFC00CE4	/* DMA Channel 3 Current Address Register */
#define DMA3_CURR_X_COUNT	0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
#define DMA3_CURR_Y_COUNT	0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
#define DMA3_IRQ_STATUS		0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
#define DMA3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register */

#define DMA4_CONFIG		0xFFC00D08	/* DMA Channel 4 Configuration Register */
#define DMA4_NEXT_DESC_PTR	0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
#define DMA4_START_ADDR		0xFFC00D04	/* DMA Channel 4 Start Address Register */
#define DMA4_X_COUNT		0xFFC00D10	/* DMA Channel 4 X Count Register */
#define DMA4_Y_COUNT		0xFFC00D18	/* DMA Channel 4 Y Count Register */
#define DMA4_X_MODIFY		0xFFC00D14	/* DMA Channel 4 X Modify Register */
#define DMA4_Y_MODIFY		0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
#define DMA4_CURR_DESC_PTR	0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
#define DMA4_CURR_ADDR		0xFFC00D24	/* DMA Channel 4 Current Address Register */
#define DMA4_CURR_X_COUNT	0xFFC00D30	/* DMA Channel 4 Current X Count Register */
#define DMA4_CURR_Y_COUNT	0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
#define DMA4_IRQ_STATUS		0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
#define DMA4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register */

#define DMA5_CONFIG		0xFFC00D48	/* DMA Channel 5 Configuration Register */
#define DMA5_NEXT_DESC_PTR	0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
#define DMA5_START_ADDR		0xFFC00D44	/* DMA Channel 5 Start Address Register */
#define DMA5_X_COUNT		0xFFC00D50	/* DMA Channel 5 X Count Register */
#define DMA5_Y_COUNT		0xFFC00D58	/* DMA Channel 5 Y Count Register */
#define DMA5_X_MODIFY		0xFFC00D54	/* DMA Channel 5 X Modify Register */
#define DMA5_Y_MODIFY		0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
#define DMA5_CURR_DESC_PTR	0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
#define DMA5_CURR_ADDR		0xFFC00D64	/* DMA Channel 5 Current Address Register */
#define DMA5_CURR_X_COUNT	0xFFC00D70	/* DMA Channel 5 Current X Count Register */
#define DMA5_CURR_Y_COUNT	0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
#define DMA5_IRQ_STATUS		0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
#define DMA5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register */

#define DMA6_CONFIG		0xFFC00D88	/* DMA Channel 6 Configuration Register */
#define DMA6_NEXT_DESC_PTR	0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
#define DMA6_START_ADDR		0xFFC00D84	/* DMA Channel 6 Start Address Register */
#define DMA6_X_COUNT		0xFFC00D90	/* DMA Channel 6 X Count Register */
#define DMA6_Y_COUNT		0xFFC00D98	/* DMA Channel 6 Y Count Register */
#define DMA6_X_MODIFY		0xFFC00D94	/* DMA Channel 6 X Modify Register */
#define DMA6_Y_MODIFY		0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
#define DMA6_CURR_DESC_PTR	0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
#define DMA6_CURR_ADDR		0xFFC00DA4	/* DMA Channel 6 Current Address Register */
#define DMA6_CURR_X_COUNT	0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
#define DMA6_CURR_Y_COUNT	0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
#define DMA6_IRQ_STATUS		0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
#define DMA6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register */

#define DMA7_CONFIG		0xFFC00DC8	/* DMA Channel 7 Configuration Register */
#define DMA7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
#define DMA7_START_ADDR		0xFFC00DC4	/* DMA Channel 7 Start Address Register */
#define DMA7_X_COUNT		0xFFC00DD0	/* DMA Channel 7 X Count Register */
#define DMA7_Y_COUNT		0xFFC00DD8	/* DMA Channel 7 Y Count Register */
#define DMA7_X_MODIFY		0xFFC00DD4	/* DMA Channel 7 X Modify Register */
#define DMA7_Y_MODIFY		0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
#define DMA7_CURR_DESC_PTR	0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
#define DMA7_CURR_ADDR		0xFFC00DE4	/* DMA Channel 7 Current Address Register */
#define DMA7_CURR_X_COUNT	0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
#define DMA7_CURR_Y_COUNT	0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
#define DMA7_IRQ_STATUS		0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
#define DMA7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register */

#define MDMA_D1_CONFIG		0xFFC00E88	/* MemDMA Stream 1 Destination Configuration Register */
#define MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
#define MDMA_D1_START_ADDR	0xFFC00E84	/* MemDMA Stream 1 Destination Start Address Register */
#define MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA Stream 1 Destination X Count Register */
#define MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA Stream 1 Destination Y Count Register */
#define MDMA_D1_X_MODIFY	0xFFC00E94	/* MemDMA Stream 1 Destination X Modify Register */
#define MDMA_D1_Y_MODIFY	0xFFC00E9C	/* MemDMA Stream 1 Destination Y Modify Register */
#define MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
#define MDMA_D1_CURR_ADDR	0xFFC00EA4	/* MemDMA Stream 1 Destination Current Address Register */
#define MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA Stream 1 Destination Current X Count Register */
#define MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA Stream 1 Destination Current Y Count Register */
#define MDMA_D1_IRQ_STATUS	0xFFC00EA8	/* MemDMA Stream 1 Destination Interrupt/Status Register */
#define MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA Stream 1 Destination Peripheral Map Register */

#define MDMA_S1_CONFIG		0xFFC00EC8	/* MemDMA Stream 1 Source Configuration Register */
#define MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register */
#define MDMA_S1_START_ADDR	0xFFC00EC4	/* MemDMA Stream 1 Source Start Address Register */
#define MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA Stream 1 Source X Count Register */
#define MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA Stream 1 Source Y Count Register */
#define MDMA_S1_X_MODIFY	0xFFC00ED4	/* MemDMA Stream 1 Source X Modify Register */
#define MDMA_S1_Y_MODIFY	0xFFC00EDC	/* MemDMA Stream 1 Source Y Modify Register */
#define MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register */
#define MDMA_S1_CURR_ADDR	0xFFC00EE4	/* MemDMA Stream 1 Source Current Address Register */
#define MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA Stream 1 Source Current X Count Register */
#define MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA Stream 1 Source Current Y Count Register */
#define MDMA_S1_IRQ_STATUS	0xFFC00EE8	/* MemDMA Stream 1 Source Interrupt/Status Register */
#define MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA Stream 1 Source Peripheral Map Register */

#define MDMA_D0_CONFIG		0xFFC00E08	/* MemDMA Stream 0 Destination Configuration Register */
#define MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
#define MDMA_D0_START_ADDR	0xFFC00E04	/* MemDMA Stream 0 Destination Start Address Register */
#define MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA Stream 0 Destination X Count Register */
#define MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA Stream 0 Destination Y Count Register */
#define MDMA_D0_X_MODIFY	0xFFC00E14	/* MemDMA Stream 0 Destination X Modify Register */
#define MDMA_D0_Y_MODIFY	0xFFC00E1C	/* MemDMA Stream 0 Destination Y Modify Register */
#define MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
#define MDMA_D0_CURR_ADDR	0xFFC00E24	/* MemDMA Stream 0 Destination Current Address Register */
#define MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA Stream 0 Destination Current X Count Register */
#define MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA Stream 0 Destination Current Y Count Register */
#define MDMA_D0_IRQ_STATUS	0xFFC00E28	/* MemDMA Stream 0 Destination Interrupt/Status Register */
#define MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA Stream 0 Destination Peripheral Map Register */

#define MDMA_S0_CONFIG		0xFFC00E48	/* MemDMA Stream 0 Source Configuration Register */
#define MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register */
#define MDMA_S0_START_ADDR	0xFFC00E44	/* MemDMA Stream 0 Source Start Address Register */
#define MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA Stream 0 Source X Count Register */
#define MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA Stream 0 Source Y Count Register */
#define MDMA_S0_X_MODIFY	0xFFC00E54	/* MemDMA Stream 0 Source X Modify Register */
#define MDMA_S0_Y_MODIFY	0xFFC00E5C	/* MemDMA Stream 0 Source Y Modify Register */
#define MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register */
#define MDMA_S0_CURR_ADDR	0xFFC00E64	/* MemDMA Stream 0 Source Current Address Register */
#define MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA Stream 0 Source Current X Count Register */
#define MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA Stream 0 Source Current Y Count Register */
#define MDMA_S0_IRQ_STATUS	0xFFC00E68	/* MemDMA Stream 0 Source Interrupt/Status Register */
#define MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA Stream 0 Source Peripheral Map Register */

/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */

#define PPI_CONTROL			0xFFC01000	/* PPI Control Register */
#define PPI_STATUS			0xFFC01004	/* PPI Status Register */
#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register */
#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register */
#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register */

/*********************************************************************************** */
/* System MMR Register Bits */
/******************************************************************************* */

/* ********************* PLL AND RESET MASKS ************************ */

/* PLL_CTL Masks */
#define PLL_CLKIN			0x0000  /* Pass CLKIN to PLL */
#define PLL_CLKIN_DIV2			0x0001  /* Pass CLKIN/2 to PLL */
#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
#define PLL_OFF				0x0002  /* Shut off PLL clocks */
#define STOPCK_OFF			0x0008  /* Core clock off */
#define STOPCK				0x0008	/* Core Clock Off									*/
#define PDWN				0x0020  /* Put the PLL in a Deep Sleep state */
#if !defined(__ADSPBF538__)
/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
# define IN_DELAY        0x0040  /* Add 200ps Delay To EBIU Input Latches */
# define OUT_DELAY       0x0080  /* Add 200ps Delay To EBIU Output Signals */
#endif
#define BYPASS				0x0100  /* Bypass the PLL */
/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/

/* PLL_DIV Masks */
#define SSEL				0x000F	/* System Select						*/
#define	CSEL				0x0030	/* Core Select							*/

#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */

#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
/* PLL_DIV Macros														*/
#define SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/

/* PLL_STAT Masks																	*/
#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */

/* VR_CTL Masks																	*/
#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/

#define GAIN			0x000C	/* Voltage Level Gain	*/
#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
#define	GAIN_50			0x000C	/* 		GAIN = 50		*/

#define	VLEV			0x00F0	/* Internal Voltage Level					*/
#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */

#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */

/* CHIPID Masks */
#define CHIPID_VERSION         0xF0000000
#define CHIPID_FAMILY          0x0FFFF000
#define CHIPID_MANUFACTURE     0x00000FFE

/* SWRST Mask */
#define SYSTEM_RESET	0x0007	/* Initiates A System Software Reset			*/
#define	DOUBLE_FAULT	0x0008	/* Core Double Fault Causes Reset				*/
#define RESET_DOUBLE	0x2000	/* SW Reset Generated By Core Double-Fault		*/
#define RESET_WDOG	0x4000	/* SW Reset Generated By Watchdog Timer			*/
#define RESET_SOFTWARE	0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/

/* SYSCR Masks																				*/
#define BMODE			0x0006	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
#define	NOBOOT			0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/

/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */

    /* SIC_IAR0 Masks */

#define P0_IVG(x)    ((x)-7)	/* Peripheral #0 assigned IVG #x  */
#define P1_IVG(x)    ((x)-7) << 0x4	/* Peripheral #1 assigned IVG #x  */
#define P2_IVG(x)    ((x)-7) << 0x8	/* Peripheral #2 assigned IVG #x  */
#define P3_IVG(x)    ((x)-7) << 0xC	/* Peripheral #3 assigned IVG #x  */
#define P4_IVG(x)    ((x)-7) << 0x10	/* Peripheral #4 assigned IVG #x  */
#define P5_IVG(x)    ((x)-7) << 0x14	/* Peripheral #5 assigned IVG #x  */
#define P6_IVG(x)    ((x)-7) << 0x18	/* Peripheral #6 assigned IVG #x  */
#define P7_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #7 assigned IVG #x  */

/* SIC_IAR1 Masks */

#define P8_IVG(x)     ((x)-7)	/* Peripheral #8 assigned IVG #x  */
#define P9_IVG(x)     ((x)-7) << 0x4	/* Peripheral #9 assigned IVG #x  */
#define P10_IVG(x)    ((x)-7) << 0x8	/* Peripheral #10 assigned IVG #x  */
#define P11_IVG(x)    ((x)-7) << 0xC	/* Peripheral #11 assigned IVG #x  */
#define P12_IVG(x)    ((x)-7) << 0x10	/* Peripheral #12 assigned IVG #x  */
#define P13_IVG(x)    ((x)-7) << 0x14	/* Peripheral #13 assigned IVG #x  */
#define P14_IVG(x)    ((x)-7) << 0x18	/* Peripheral #14 assigned IVG #x  */
#define P15_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #15 assigned IVG #x  */

/* SIC_IAR2 Masks */
#define P16_IVG(x)    ((x)-7)	/* Peripheral #16 assigned IVG #x  */
#define P17_IVG(x)    ((x)-7) << 0x4	/* Peripheral #17 assigned IVG #x  */
#define P18_IVG(x)    ((x)-7) << 0x8	/* Peripheral #18 assigned IVG #x  */
#define P19_IVG(x)    ((x)-7) << 0xC	/* Peripheral #19 assigned IVG #x  */
#define P20_IVG(x)    ((x)-7) << 0x10	/* Peripheral #20 assigned IVG #x  */
#define P21_IVG(x)    ((x)-7) << 0x14	/* Peripheral #21 assigned IVG #x  */
#define P22_IVG(x)    ((x)-7) << 0x18	/* Peripheral #22 assigned IVG #x  */
#define P23_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #23 assigned IVG #x  */

/* SIC_IMASK Masks */
#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */

/* SIC_IWR Masks */
#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */

/* ***************************** UART CONTROLLER MASKS ********************** */

/* UART_LCR Register */

#define DLAB	0x80
#define SB      0x40
#define STP      0x20
#define EPS     0x10
#define PEN	0x08
#define STB	0x04
#define WLS(x)	((x-5) & 0x03)

#define DLAB_P	0x07
#define SB_P	0x06
#define STP_P	0x05
#define EPS_P	0x04
#define PEN_P	0x03
#define STB_P	0x02
#define WLS_P1	0x01
#define WLS_P0	0x00

/* UART_MCR Register */
#define LOOP_ENA	0x10
#define LOOP_ENA_P	0x04

/* UART_LSR Register */
#define TEMT	0x40
#define THRE	0x20
#define BI	0x10
#define FE	0x08
#define PE	0x04
#define OE	0x02
#define DR	0x01

#define TEMP_P	0x06
#define THRE_P	0x05
#define BI_P	0x04
#define FE_P	0x03
#define PE_P	0x02
#define OE_P	0x01
#define DR_P	0x00

/* UART_IER Register */
#define ELSI	0x04
#define ETBEI	0x02
#define ERBFI	0x01

#define ELSI_P	0x02
#define ETBEI_P	0x01
#define ERBFI_P	0x00

/* UART_IIR Register */
#define STATUS(x)	((x << 1) & 0x06)
#define NINT		0x01
#define STATUS_P1	0x02
#define STATUS_P0	0x01
#define NINT_P		0x00
#define IIR_TX_READY    0x02	/* UART_THR empty                               */
#define IIR_RX_READY    0x04	/* Receive data ready                           */
#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
#define IIR_STATUS	0x06

/* UART_GCTL Register */
#define FFE	0x20
#define FPE	0x10
#define RPOLC	0x08
#define TPOLC	0x04
#define IREN	0x02
#define UCEN	0x01

#define FFE_P	0x05
#define FPE_P	0x04
#define RPOLC_P	0x03
#define TPOLC_P	0x02
#define IREN_P	0x01
#define UCEN_P	0x00

/* **********  SERIAL PORT MASKS  ********************** */

/* SPORTx_TCR1 Masks */
#define TSPEN    0x0001		/* TX enable  */
#define ITCLK    0x0002		/* Internal TX Clock Select  */
#define TDTYPE   0x000C		/* TX Data Formatting Select */
#define DTYPE_NORM	0x0000		/* Data Format Normal							*/
#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
#define TLSBIT   0x0010		/* TX Bit Order */
#define ITFS     0x0200		/* Internal TX Frame Sync Select  */
#define TFSR     0x0400		/* TX Frame Sync Required Select  */
#define DITFS    0x0800		/* Data Independent TX Frame Sync Select  */
#define LTFS     0x1000		/* Low TX Frame Sync Select  */
#define LATFS    0x2000		/* Late TX Frame Sync Select  */
#define TCKFE    0x4000		/* TX Clock Falling Edge Select  */

/* SPORTx_TCR2 Masks */
#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \
    defined(__ADSPBF533__)
# define SLEN	    0x001F	/*TX Word Length  */
#else
# define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)				*/
#endif
#define TXSE        0x0100	/*TX Secondary Enable */
#define TSFSE       0x0200	/*TX Stereo Frame Sync Enable */
#define TRFST       0x0400	/*TX Right-First Data Order  */

/* SPORTx_RCR1 Masks */
#define RSPEN    0x0001		/* RX enable  */
#define IRCLK    0x0002		/* Internal RX Clock Select  */
#define RDTYPE   0x000C		/* RX Data Formatting Select */
#define DTYPE_NORM	0x0000		/* no companding							*/
#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
#define RLSBIT   0x0010		/* RX Bit Order */
#define IRFS     0x0200		/* Internal RX Frame Sync Select  */
#define RFSR     0x0400		/* RX Frame Sync Required Select  */
#define LRFS     0x1000		/* Low RX Frame Sync Select  */
#define LARFS    0x2000		/* Late RX Frame Sync Select  */
#define RCKFE    0x4000		/* RX Clock Falling Edge Select  */

/* SPORTx_RCR2 Masks */
/* SLEN defined above */
#define RXSE        0x0100	/*RX Secondary Enable */
#define RSFSE       0x0200	/*RX Stereo Frame Sync Enable */
#define RRFST       0x0400	/*Right-First Data Order  */

/*SPORTx_STAT Masks */
#define RXNE		0x0001	/*RX FIFO Not Empty Status */
#define RUVF	    	0x0002	/*RX Underflow Status */
#define ROVF		0x0004	/*RX Overflow Status */
#define TXF		0x0008	/*TX FIFO Full Status */
#define TUVF         	0x0010	/*TX Underflow Status */
#define TOVF         	0x0020	/*TX Overflow Status */
#define TXHRE        	0x0040	/*TX Hold Register Empty */

/*SPORTx_MCMC1 Masks */
#define SP_WSIZE		0x0000F000	/*Multichannel Window Size Field */
#define SP_WOFF		0x000003FF	/*Multichannel Window Offset Field */
/* SPORTx_MCMC1 Macros															*/
#define SET_SP_WOFF(x)	((x) & 0x3FF) 	/* Multichannel Window Offset Field			*/
/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
#define SET_SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1	*/

/*SPORTx_MCMC2 Masks */
#define MCCRM		0x00000003 	/*Multichannel Clock Recovery Mode */
#define REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery)				*/
#define REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock			*/
#define REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock		*/
#define MCDTXPE		0x00000004 	/*Multichannel DMA Transmit Packing */
#define MCDRXPE		0x00000008 	/*Multichannel DMA Receive Packing */
#define MCMEN		0x00000010 	/*Multichannel Frame Mode Enable */
#define FSDR		0x00000080 	/*Multichannel Frame Sync to Data Relationship */
#define MFD		0x0000F000 	/*Multichannel Frame Delay    */
#define MFD_0		0x0000		/* Multichannel Frame Delay = 0					*/
#define MFD_1		0x1000		/* Multichannel Frame Delay = 1					*/
#define MFD_2		0x2000		/* Multichannel Frame Delay = 2					*/
#define MFD_3		0x3000		/* Multichannel Frame Delay = 3					*/
#define MFD_4		0x4000		/* Multichannel Frame Delay = 4					*/
#define MFD_5		0x5000		/* Multichannel Frame Delay = 5					*/
#define MFD_6		0x6000		/* Multichannel Frame Delay = 6					*/
#define MFD_7		0x7000		/* Multichannel Frame Delay = 7					*/
#define MFD_8		0x8000		/* Multichannel Frame Delay = 8					*/
#define MFD_9		0x9000		/* Multichannel Frame Delay = 9					*/
#define MFD_10		0xA000		/* Multichannel Frame Delay = 10				*/
#define MFD_11		0xB000		/* Multichannel Frame Delay = 11				*/
#define MFD_12		0xC000		/* Multichannel Frame Delay = 12				*/
#define MFD_13		0xD000		/* Multichannel Frame Delay = 13				*/
#define MFD_14		0xE000		/* Multichannel Frame Delay = 14				*/
#define MFD_15		0xF000		/* Multichannel Frame Delay = 15				*/

/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */

/*  PPI_CONTROL Masks         */
#define PORT_EN              0x00000001	/* PPI Port Enable  */
#define PORT_DIR             0x00000002	/* PPI Port Direction       */
#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
#define PORT_CFG             0x00000030	/* PPI Port Configuration */
#define FLD_SEL              0x00000040	/* PPI Active Field Select */
#define PACK_EN              0x00000080	/* PPI Packing Mode */
#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
#define DLENGTH              0x00003800	/* PPI Data Length  */
#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
#define POL                  0x0000C000	/* PPI Signal Polarities       */
#define POLC		0x4000		/* PPI Clock Polarity				*/
#define POLS		0x8000		/* PPI Frame Sync Polarity			*/

/* PPI_STATUS Masks                                          */
#define FLD	             0x00000400	/* Field Indicator   */
#define FT_ERR	             0x00000800	/* Frame Track Error */
#define OVR	             0x00001000	/* FIFO Overflow Error */
#define UNDR	             0x00002000	/* FIFO Underrun Error */
#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */

/* **********  DMA CONTROLLER MASKS  *********************8 */

/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
#define DMAEN	        0x00000001	/* Channel Enable */
#define WNR	   	0x00000002	/* Channel Direction (W/R*) */
#define WDSIZE_8	0x00000000	/* Word Size 8 bits */
#define WDSIZE_16	0x00000004	/* Word Size 16 bits */
#define WDSIZE_32	0x00000008	/* Word Size 32 bits */
#define DMA2D	        0x00000010	/* 2D/1D* Mode */
#define RESTART         0x00000020	/* Restart */
#define DI_SEL	        0x00000040	/* Data Interrupt Select */
#define DI_EN	        0x00000080	/* Data Interrupt Enable */
#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
#define NDSIZE	        0x00000900	/* Next Descriptor Size */
#define DMAFLOW	        0x00007000	/* Flow Control */
#define DMAFLOW_STOP		0x0000	/* Stop Mode */
#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */

#define DMAEN_P	            	0	/* Channel Enable */
#define WNR_P	            	1	/* Channel Direction (W/R*) */
#define DMA2D_P	        	4	/* 2D/1D* Mode */
#define RESTART_P	      	5	/* Restart */
#define DI_SEL_P	     	6	/* Data Interrupt Select */
#define DI_EN_P	            	7	/* Data Interrupt Enable */

/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */

#define DMA_DONE		0x00000001	/* DMA Done Indicator */
#define DMA_ERR	        	0x00000002	/* DMA Error Indicator */
#define DFETCH	            	0x00000004	/* Descriptor Fetch Indicator */
#define DMA_RUN	            	0x00000008	/* DMA Running Indicator */

#define DMA_DONE_P	    	0	/* DMA Done Indicator */
#define DMA_ERR_P     		1	/* DMA Error Indicator */
#define DFETCH_P     		2	/* Descriptor Fetch Indicator */
#define DMA_RUN_P     		3	/* DMA Running Indicator */

/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */

#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
#define PMAP	            0x00007000	/* DMA Peripheral Map Field */

#define PMAP_PPI		0x0000	/* PMAP PPI Port DMA */
#define	PMAP_SPORT0RX		0x1000	/* PMAP SPORT0 Receive DMA */
#define PMAP_SPORT0TX		0x2000	/* PMAP SPORT0 Transmit DMA */
#define	PMAP_SPORT1RX		0x3000	/* PMAP SPORT1 Receive DMA */
#define PMAP_SPORT1TX		0x4000	/* PMAP SPORT1 Transmit DMA */
#define PMAP_SPI		0x5000	/* PMAP SPI DMA */
#define PMAP_UARTRX		0x6000	/* PMAP UART Receive DMA */
#define PMAP_UARTTX		0x7000	/* PMAP UART Transmit DMA */

/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */

/* PWM Timer bit definitions */

/* TIMER_ENABLE Register */
#define TIMEN0	0x0001
#define TIMEN1	0x0002
#define TIMEN2	0x0004

#define TIMEN0_P	0x00
#define TIMEN1_P	0x01
#define TIMEN2_P	0x02

/* TIMER_DISABLE Register */
#define TIMDIS0	0x0001
#define TIMDIS1	0x0002
#define TIMDIS2	0x0004

#define TIMDIS0_P	0x00
#define TIMDIS1_P	0x01
#define TIMDIS2_P	0x02

/* TIMER_STATUS Register */
#define TIMIL0		0x0001
#define TIMIL1		0x0002
#define TIMIL2		0x0004
#define TOVF_ERR0		0x0010	/* Timer 0 Counter Overflow		*/
#define TOVF_ERR1		0x0020	/* Timer 1 Counter Overflow		*/
#define TOVF_ERR2		0x0040	/* Timer 2 Counter Overflow		*/
#define TRUN0		0x1000
#define TRUN1		0x2000
#define TRUN2		0x4000

#define TIMIL0_P	0x00
#define TIMIL1_P	0x01
#define TIMIL2_P	0x02
#define TOVF_ERR0_P		0x04
#define TOVF_ERR1_P		0x05
#define TOVF_ERR2_P		0x06
#define TRUN0_P		0x0C
#define TRUN1_P		0x0D
#define TRUN2_P		0x0E

/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define TOVL_ERR0 		TOVF_ERR0
#define TOVL_ERR1 		TOVF_ERR1
#define TOVL_ERR2 		TOVF_ERR2
#define TOVL_ERR0_P		TOVF_ERR0_P
#define TOVL_ERR1_P 		TOVF_ERR1_P
#define TOVL_ERR2_P 		TOVF_ERR2_P

/* TIMERx_CONFIG Registers */
#define PWM_OUT		0x0001
#define WDTH_CAP	0x0002
#define EXT_CLK		0x0003
#define PULSE_HI	0x0004
#define PERIOD_CNT	0x0008
#define IRQ_ENA		0x0010
#define TIN_SEL		0x0020
#define OUT_DIS		0x0040
#define CLK_SEL		0x0080
#define TOGGLE_HI	0x0100
#define EMU_RUN		0x0200
#define ERR_TYP(x)	((x & 0x03) << 14)

#define TMODE_P0		0x00
#define TMODE_P1		0x01
#define PULSE_HI_P		0x02
#define PERIOD_CNT_P		0x03
#define IRQ_ENA_P		0x04
#define TIN_SEL_P		0x05
#define OUT_DIS_P		0x06
#define CLK_SEL_P		0x07
#define TOGGLE_HI_P		0x08
#define EMU_RUN_P		0x09
#define ERR_TYP_P0		0x0E
#define ERR_TYP_P1		0x0F

/*/ ******************   PROGRAMMABLE FLAG MASKS  ********************* */

/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
#define PF0         0x0001
#define PF1         0x0002
#define PF2         0x0004
#define PF3         0x0008
#define PF4         0x0010
#define PF5         0x0020
#define PF6         0x0040
#define PF7         0x0080
#define PF8         0x0100
#define PF9         0x0200
#define PF10        0x0400
#define PF11        0x0800
#define PF12        0x1000
#define PF13        0x2000
#define PF14        0x4000
#define PF15        0x8000

/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
#define PF0_P         0
#define PF1_P         1
#define PF2_P         2
#define PF3_P         3
#define PF4_P         4
#define PF5_P         5
#define PF6_P         6
#define PF7_P         7
#define PF8_P         8
#define PF9_P         9
#define PF10_P        10
#define PF11_P        11
#define PF12_P        12
#define PF13_P        13
#define PF14_P        14
#define PF15_P        15

/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */

/* SPI_CTL Masks */
#define TIMOD                  0x00000003	/* Transfer initiation mode and interrupt generation */
#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
#define SZ                     0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
#define GM                     0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE                   0x00000010	/* Enable (=1) Slave-Select input for Master. */
#define EMISO                  0x00000020	/* Enable (=1) MISO pin as an output. */
#define SIZE                   0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
#define LSBF                   0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA                   0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL                   0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
#define MSTR                   0x00001000	/* Configures SPI as master (=1) or slave (=0) */
#define WOM                    0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
#define SPE                    0x00004000	/* SPI module enable (=1), disable (=0) */

/* SPI_FLG Masks */
#define FLS1                   0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2                   0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3                   0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4                   0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5                   0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6                   0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7                   0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1                   0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
#define FLG2                   0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3                   0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
#define FLG4                   0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
#define FLG5                   0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
#define FLG6                   0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
#define FLG7                   0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */

/* SPI_FLG Bit Positions */
#define FLS1_P                 0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P                 0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P                 0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P                 0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P                 0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P                 0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P                 0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P                 0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
#define FLG2_P                 0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P                 0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
#define FLG4_P                 0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
#define FLG5_P                 0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
#define FLG6_P                 0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
#define FLG7_P                 0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */

/* SPI_STAT Masks */
#define SPIF                   0x00000001	/* Set (=1) when SPI single-word transfer complete */
#define MODF                   0x00000002	/* Set (=1) in a master device when some other device tries to become master */
#define TXE                    0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS                    0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY                   0x00000010	/* Set (=1) when data is received with RDBR full */
#define RXS                    0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
#define TXCOL                  0x00000040	/* When set (=1), corrupt data may have been transmitted  */

/* SPIx_FLG Masks																	*/
#define FLG1E	0xFDFF		/* Activates SPI_FLOUT1 							*/
#define FLG2E	0xFBFF		/* Activates SPI_FLOUT2								*/
#define FLG3E	0xF7FF		/* Activates SPI_FLOUT3								*/
#define FLG4E	0xEFFF		/* Activates SPI_FLOUT4								*/
#define FLG5E	0xDFFF		/* Activates SPI_FLOUT5								*/
#define FLG6E	0xBFFF		/* Activates SPI_FLOUT6								*/
#define FLG7E	0x7FFF		/* Activates SPI_FLOUT7								*/

/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */

/* AMGCTL Masks */
#define AMCKEN			0x00000001	/* Enable CLKOUT */
#define	AMBEN_NONE		0x00000000	/* All Banks Disabled								*/
#define AMBEN_B0		0x00000002	/* Enable Asynchronous Memory Bank 0 only */
#define AMBEN_B0_B1		0x00000004	/* Enable Asynchronous Memory Banks 0 & 1 only */
#define AMBEN_B0_B1_B2		0x00000006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
#define AMBEN_ALL		0x00000008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */

/* AMGCTL Bit Positions */
#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */

/* AMBCTL0 Masks */
#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */

/* AMBCTL1 Masks */
#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */

/* **********************  SDRAM CONTROLLER MASKS  *************************** */

/* SDGCTL Masks */
#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
#define PFE			0x00000010	/* Enable SDRAM prefetch */
#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
#define PUPSD			0x00200000	/*Power-up start delay */
#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
#define EBUFE			0x02000000	/* Enable external buffering timing */
#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
#define EMREN			0x10000000	/* Extended mode register enable */
#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */

/* EBIU_SDBCTL Masks */
#define EBE			0x00000001	/* Enable SDRAM external bank */
#define EBSZ_16			0x00000000	/* SDRAM external bank size = 16MB */
#define EBSZ_32			0x00000002	/* SDRAM external bank size = 32MB */
#define EBSZ_64			0x00000004	/* SDRAM external bank size = 64MB */
#define EBSZ_128			0x00000006	/* SDRAM external bank size = 128MB */
#define EBCAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
#define EBCAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
#define EBCAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
#define EBCAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */

/* EBIU_SDSTAT Masks */
#define SDCI			0x00000001	/* SDRAM controller is idle  */
#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
#define SDPUA			0x00000004	/* SDRAM power up active  */
#define SDRS			0x00000008	/* SDRAM is in reset state */
#define SDEASE		      0x00000010	/* SDRAM EAB sticky error status - W1C */
#define BGSTAT			0x00000020	/* Bus granted */


#endif				/* _DEF_BF532_H */