blob: 1e6beca8d40382b2fe59701067460aee2e044e77 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/*
* arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory
*
* Copyright 2004-2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/dma.h>
#include <asm/clocks.h>
#include <asm/mem_init.h>
#include <asm/dpmc.h>
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
(PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
__attribute__((l1_text))
static void do_sync(void)
{
__builtin_bfin_ssync();
}
__attribute__((l1_text))
void init_clocks(void)
{
/* Kill any active DMAs as they may trigger external memory accesses
* in the middle of reprogramming things, and that'll screw us up.
* For example, any automatic DMAs left by U-Boot for splash screens.
*/
#if 0
size_t i;
for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
struct dma_register *dma = dma_io_base_addr[i];
dma->cfg = 0;
}
do_sync();
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_ENABLE(0));
# ifdef SIC_IWR1
/* BF52x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
* http://blackfin.uclinux.org/gf/tracker/4323
*/
if (ANOMALY_05000435)
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
# endif
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
bfin_write_SIC_IWR(IWR_ENABLE(0));
#endif
do_sync();
#ifdef EBIU_SDGCTL
bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
do_sync();
#endif
#ifdef CLKBUFOE
bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE);
do_sync();
__asm__ __volatile__("IDLE;");
#endif
bfin_write_PLL_LOCKCNT(0x300);
do_sync();
/* We always write PLL_CTL thus avoiding Anomaly 05000242 */
bfin_write16(PLL_CTL, PLL_CTL_VAL);
__asm__ __volatile__("IDLE;");
bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
#ifdef EBIU_SDGCTL
bfin_write_EBIU_SDRRC(mem_SDRRC);
bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
#else
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
do_sync();
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1);
bfin_write_EBIU_DDRCTL0(mem_DDRCTL0);
bfin_write_EBIU_DDRCTL1(mem_DDRCTL1);
bfin_write_EBIU_DDRCTL2(mem_DDRCTL2);
#ifdef CONFIG_MEM_EBIU_DDRQUE
bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
#endif
#endif
do_sync();
bfin_read16(0);
#endif
}
|
