1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
/***************************************************************************/
/*
* linux/arch/m68knommu/platform/5407/config.c
*
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2000, Lineo (www.lineo.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
/***************************************************************************/
static struct mcf_platform_uart m5407_uart_platform[] = {
{
.mapbase = MCFUART_BASE0,
.irq = MCF_IRQ_UART0,
},
{
.mapbase = MCFUART_BASE1,
.irq = MCF_IRQ_UART1,
},
{ },
};
static struct platform_device m5407_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5407_uart_platform,
};
static struct platform_device *m5407_devices[] __initdata = {
&m5407_uart,
};
/***************************************************************************/
static void __init m5407_uarts_init(void)
{
/* UART0 interrupt setup */
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
/* UART1 interrupt setup */
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
}
/***************************************************************************/
static void __init m5407_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5407_cpu_reset(void)
{
local_irq_disable();
/* set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_reset = m5407_cpu_reset;
mach_sched_init = hw_timer_init;
m5407_timers_init();
m5407_uarts_init();
/* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1);
mcf_mapirq2imr(27, MCFINTC_EINT3);
mcf_mapirq2imr(29, MCFINTC_EINT5);
mcf_mapirq2imr(31, MCFINTC_EINT7);
}
/***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
|
