1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
|
/*
* device.c -- common ColdFire SoC device support
*
* (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/fec.h>
#include <asm/traps.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/*
* All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
*/
static struct mcf_platform_uart mcf_uart_platform_data[] = {
{
.mapbase = MCFUART_BASE0,
.irq = MCF_IRQ_UART0,
},
{
.mapbase = MCFUART_BASE1,
.irq = MCF_IRQ_UART1,
},
#ifdef MCFUART_BASE2
{
.mapbase = MCFUART_BASE2,
.irq = MCF_IRQ_UART2,
},
#endif
#ifdef MCFUART_BASE3
{
.mapbase = MCFUART_BASE3,
.irq = MCF_IRQ_UART3,
},
#endif
#ifdef MCFUART_BASE4
{
.mapbase = MCFUART_BASE4,
.irq = MCF_IRQ_UART4,
},
#endif
#ifdef MCFUART_BASE5
{
.mapbase = MCFUART_BASE5,
.irq = MCF_IRQ_UART5,
},
#endif
#ifdef MCFUART_BASE6
{
.mapbase = MCFUART_BASE6,
.irq = MCF_IRQ_UART6,
},
#endif
#ifdef MCFUART_BASE7
{
.mapbase = MCFUART_BASE7,
.irq = MCF_IRQ_UART7,
},
#endif
#ifdef MCFUART_BASE8
{
.mapbase = MCFUART_BASE8,
.irq = MCF_IRQ_UART8,
},
#endif
#ifdef MCFUART_BASE9
{
.mapbase = MCFUART_BASE9,
.irq = MCF_IRQ_UART9,
},
#endif
{ },
};
static struct platform_device mcf_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = mcf_uart_platform_data,
};
#ifdef CONFIG_FEC
#ifdef CONFIG_M5441x
#define FEC_NAME "enet-fec"
static struct fec_platform_data fec_pdata = {
.phy = PHY_INTERFACE_MODE_RMII,
};
#define FEC_PDATA (&fec_pdata)
#else
#define FEC_NAME "fec"
#define FEC_PDATA NULL
#endif
/*
* Some ColdFire cores contain the Fast Ethernet Controller (FEC)
* block. It is Freescale's own hardware block. Some ColdFires
* have 2 of these.
*/
static struct resource mcf_fec0_resources[] = {
{
.start = MCFFEC_BASE0,
.end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_FECRX0,
.end = MCF_IRQ_FECRX0,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECTX0,
.end = MCF_IRQ_FECTX0,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECENTC0,
.end = MCF_IRQ_FECENTC0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_fec0 = {
.name = FEC_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(mcf_fec0_resources),
.resource = mcf_fec0_resources,
.dev.platform_data = FEC_PDATA,
};
#ifdef MCFFEC_BASE1
static struct resource mcf_fec1_resources[] = {
{
.start = MCFFEC_BASE1,
.end = MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_FECRX1,
.end = MCF_IRQ_FECRX1,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECTX1,
.end = MCF_IRQ_FECTX1,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_FECENTC1,
.end = MCF_IRQ_FECENTC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mcf_fec1 = {
.name = FEC_NAME,
.id = 1,
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
.resource = mcf_fec1_resources,
.dev.platform_data = FEC_PDATA,
};
#endif /* MCFFEC_BASE1 */
#endif /* CONFIG_FEC */
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
/*
* The ColdFire QSPI module is an SPI protocol hardware block used
* on a number of different ColdFire CPUs.
*/
static struct resource mcf_qspi_resources[] = {
{
.start = MCFQSPI_BASE,
.end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
#ifdef MCFQSPI_CS3
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
gpio_free(MCFQSPI_CS3);
goto fail3;
}
#endif
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
#ifdef MCFQSPI_CS3
gpio_free(MCFQSPI_CS3);
#endif
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
#ifdef MCFQSPI_CS3
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
#endif
}
}
static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
#ifdef MCFQSPI_CS3
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
#endif
}
}
static struct mcfqspi_cs_control mcf_cs_control = {
.setup = mcf_cs_setup,
.teardown = mcf_cs_teardown,
.select = mcf_cs_select,
.deselect = mcf_cs_deselect,
};
static struct mcfqspi_platform_data mcf_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &mcf_cs_control,
};
static struct platform_device mcf_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(mcf_qspi_resources),
.resource = mcf_qspi_resources,
.dev.platform_data = &mcf_qspi_data,
};
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
#ifdef CONFIG_FEC
&mcf_fec0,
#ifdef MCFFEC_BASE1
&mcf_fec1,
#endif
#endif
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
&mcf_qspi,
#endif
};
/*
* Some ColdFire UARTs let you set the IRQ line to use.
*/
static void __init mcf_uart_set_irq(void)
{
#ifdef MCFUART_UIVR
/* UART0 interrupt setup */
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
/* UART1 interrupt setup */
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
#endif
}
static int __init mcf_init_devices(void)
{
mcf_uart_set_irq();
platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
return 0;
}
arch_initcall(mcf_init_devices);
|
