1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
|
/*
* setup.c
*
* BRIEF MODULE DESCRIPTION
* Momentum Computer Ocelot (CP7000) - board dependent boot routines
*
* Copyright (C) 1996, 1997, 2001 Ralf Baechle
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
*
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pci.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/reboot.h>
#include <asm/traps.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
#include <asm/gt64120.h>
#include "ocelot_pld.h"
unsigned long gt64120_base = KSEG1ADDR(GT_DEF_BASE);
/* These functions are used for rebooting or halting the machine*/
extern void momenco_ocelot_restart(char *command);
extern void momenco_ocelot_halt(void);
extern void momenco_ocelot_power_off(void);
extern void gt64120_time_init(void);
extern void momenco_ocelot_irq_setup(void);
static char reset_reason;
#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> PAGE_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6)|1)
static void __init setup_l3cache(unsigned long size);
/* setup code for a handoff from a version 1 PMON 2000 PROM */
void PMON_v1_setup()
{
/* A wired TLB entry for the GT64120A and the serial port. The
GT64120A is going to be hit on every IRQ anyway - there's
absolutely no point in letting it be a random TLB entry, as
it'll just cause needless churning of the TLB. And we use
the other half for the serial port, which is just a PITA
otherwise :)
Device Physical Virtual
GT64120 Internal Regs 0x24000000 0xe0000000
UARTs (CS2) 0x2d000000 0xe0001000
*/
add_wired_entry(ENTRYLO(0x24000000), ENTRYLO(0x2D000000), 0xe0000000, PM_4K);
/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
in the CS[012] region. We can't use ioremap() yet. The NVRAM
is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
Ocelot PLD (CS0) 0x2c000000 0xe0020000
NVRAM 0x2c800000 0xe0030000
*/
add_temporary_entry(ENTRYLO(0x2C000000), ENTRYLO(0x2d000000), 0xe0020000, PM_64K);
/* Relocate the CS3/BootCS region */
GT_WRITE(GT_CS3BOOTLD_OFS, 0x2f000000 >> 21);
/* Relocate CS[012] */
GT_WRITE(GT_CS20LD_OFS, 0x2c000000 >> 21);
/* Relocate the GT64120A itself... */
GT_WRITE(GT_ISD_OFS, 0x24000000 >> 21);
mb();
gt64120_base = 0xe0000000;
/* ...and the PCI0 view of it. */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000020);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000000);
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000024);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000001);
}
/* setup code for a handoff from a version 2 PMON 2000 PROM */
void PMON_v2_setup()
{
/* A wired TLB entry for the GT64120A and the serial port. The
GT64120A is going to be hit on every IRQ anyway - there's
absolutely no point in letting it be a random TLB entry, as
it'll just cause needless churning of the TLB. And we use
the other half for the serial port, which is just a PITA
otherwise :)
Device Physical Virtual
GT64120 Internal Regs 0xf4000000 0xe0000000
UARTs (CS2) 0xfd000000 0xe0001000
*/
add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xfD000000), 0xe0000000, PM_4K);
/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
in the CS[012] region. We can't use ioremap() yet. The NVRAM
is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
Ocelot PLD (CS0) 0xfc000000 0xe0020000
NVRAM 0xfc800000 0xe0030000
*/
add_temporary_entry(ENTRYLO(0xfC000000), ENTRYLO(0xfd000000), 0xe0020000, PM_64K);
gt64120_base = 0xe0000000;
}
void __init plat_setup(void)
{
void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache);
unsigned int tmpword;
board_time_init = gt64120_time_init;
_machine_restart = momenco_ocelot_restart;
_machine_halt = momenco_ocelot_halt;
_machine_power_off = momenco_ocelot_power_off;
/*
* initrd_start = (ulong)ocelot_initrd_start;
* initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
* initrd_below_start_ok = 1;
*/
/* do handoff reconfiguration */
if (gt64120_base == KSEG1ADDR(GT_DEF_BASE))
PMON_v1_setup();
else
PMON_v2_setup();
/* Turn off the Bit-Error LED */
OCELOT_PLD_WRITE(0x80, INTCLR);
/* Relocate all the PCI1 stuff, not that we use it */
GT_WRITE(GT_PCI1IOLD_OFS, 0x30000000 >> 21);
GT_WRITE(GT_PCI1M0LD_OFS, 0x32000000 >> 21);
GT_WRITE(GT_PCI1M1LD_OFS, 0x34000000 >> 21);
/* Relocate PCI0 I/O and Mem0 */
GT_WRITE(GT_PCI0IOLD_OFS, 0x20000000 >> 21);
GT_WRITE(GT_PCI0M0LD_OFS, 0x22000000 >> 21);
/* Relocate PCI0 Mem1 */
GT_WRITE(GT_PCI0M1LD_OFS, 0x36000000 >> 21);
/* For the initial programming, we assume 512MB configuration */
/* Relocate the CPU's view of the RAM... */
GT_WRITE(GT_SCS10LD_OFS, 0);
GT_WRITE(GT_SCS10HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x10000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS1LD_OFS, 0xff);
GT_WRITE(GT_SCS1HD_OFS, 0x00);
GT_WRITE(GT_SCS0LD_OFS, 0);
GT_WRITE(GT_SCS0HD_OFS, 0xff);
GT_WRITE(GT_SCS3LD_OFS, 0xff);
GT_WRITE(GT_SCS3HD_OFS, 0x00);
GT_WRITE(GT_SCS2LD_OFS, 0);
GT_WRITE(GT_SCS2HD_OFS, 0xff);
/* ...and the PCI0 view of it. */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000010);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x00000000);
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x10000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000);
tmpword = OCELOT_PLD_READ(BOARDREV);
if (tmpword < 26)
printk("Momenco Ocelot: Board Assembly Rev. %c\n", 'A'+tmpword);
else
printk("Momenco Ocelot: Board Assembly Revision #0x%x\n", tmpword);
tmpword = OCELOT_PLD_READ(PLD1_ID);
printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
tmpword = OCELOT_PLD_READ(PLD2_ID);
printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
tmpword = OCELOT_PLD_READ(RESET_STATUS);
printk("Reset reason: 0x%x\n", tmpword);
reset_reason = tmpword;
OCELOT_PLD_WRITE(0xff, RESET_STATUS);
tmpword = OCELOT_PLD_READ(BOARD_STATUS);
printk("Board Status register: 0x%02x\n", tmpword);
printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
if (tmpword&12)
l3func((1<<(((tmpword&12) >> 2)+20)));
switch(tmpword &3) {
case 3:
/* 512MiB */
/* Decoders are allready set -- just add the
* appropriate region */
add_memory_region( 0x40<<20, 0xC0<<20, BOOT_MEM_RAM);
add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
break;
case 2:
/* 256MiB -- two banks of 128MiB */
GT_WRITE(GT_SCS10HD_OFS, 0x07e00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x08000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21);
GT_WRITE(GT_SCS0HD_OFS, 0x7f);
GT_WRITE(GT_SCS2LD_OFS, 0x80);
GT_WRITE(GT_SCS2HD_OFS, 0xff);
/* reconfigure the PCI0 interface view of memory */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x08000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000);
add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
break;
case 1:
/* 128MiB -- 64MiB per bank */
GT_WRITE(GT_SCS10HD_OFS, 0x03e00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x04000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x07e00000 >> 21);
GT_WRITE(GT_SCS0HD_OFS, 0x3f);
GT_WRITE(GT_SCS2LD_OFS, 0x40);
GT_WRITE(GT_SCS2HD_OFS, 0x7f);
/* reconfigure the PCI0 interface view of memory */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x03fff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x03fff000);
/* add the appropriate region */
add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
break;
case 0:
/* 64MiB */
GT_WRITE(GT_SCS10HD_OFS, 0x01e00000 >> 21);
GT_WRITE(GT_SCS32LD_OFS, 0x02000000 >> 21);
GT_WRITE(GT_SCS32HD_OFS, 0x03e00000 >> 21);
GT_WRITE(GT_SCS0HD_OFS, 0x1f);
GT_WRITE(GT_SCS2LD_OFS, 0x20);
GT_WRITE(GT_SCS2HD_OFS, 0x3f);
/* reconfigure the PCI0 interface view of memory */
GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014);
GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000);
GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x01fff000);
GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x01fff000);
break;
}
/* Fix up the DiskOnChip mapping */
GT_WRITE(GT_DEV_B3_OFS, 0xfef73);
}
extern int rm7k_tcache_enabled;
/*
* This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
*/
#define Page_Invalidate_T 0x16
static void __init setup_l3cache(unsigned long size)
{
int register i;
unsigned long tmp;
printk("Enabling L3 cache...");
/* Enable the L3 cache in the GT64120A's CPU Configuration register */
tmp = GT_READ(GT_CPU_OFS);
GT_WRITE(GT_CPU_OFS, tmp | (1<<14));
/* Enable the L3 cache in the CPU */
set_c0_config(1<<12 /* CONF_TE */);
/* Clear the cache */
write_c0_taglo(0);
write_c0_taghi(0);
for (i=0; i < size; i+= 4096) {
__asm__ __volatile__ (
".set noreorder\n\t"
".set mips3\n\t"
"cache %1, (%0)\n\t"
".set mips0\n\t"
".set reorder"
:
: "r" (KSEG0ADDR(i)),
"i" (Page_Invalidate_T));
}
/* Let the RM7000 MM code know that the tertiary cache is enabled */
rm7k_tcache_enabled = 1;
printk("Done\n");
}
/* This needs to be one of the first initcalls, because no I/O port access
can work before this */
static int io_base_ioremap(void)
{
void *io_remap_range = ioremap(GT_PCI_IO_BASE, GT_PCI_IO_SIZE);
if (!io_remap_range) {
panic("Could not ioremap I/O port range");
}
set_io_port_base(io_remap_range - GT_PCI_IO_BASE);
return 0;
}
module_init(io_base_ioremap);
|
