1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
|
/*
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* Copyright (C) 2001 Ralf Baechle
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
*
* This file define the irq handler for MIPS CPU interrupts.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
* Almost all MIPS CPUs define 8 interrupt sources. They are typically
* level triggered (i.e., cannot be cleared from CPU; must be cleared from
* device). The first two are software interrupts which we don't really
* use or support. The last one is usually the CPU timer interrupt if
* counter register is present or, for CPUs with an external FPU, by
* convention it's the FPU exception interrupt.
*
* Don't even think about using this on SMP. You have been warned.
*
* This file exports one global function:
* void mips_cpu_irq_init(void);
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/system.h>
static inline void unmask_mips_irq(struct irq_data *d)
{
set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
irq_enable_hazard();
}
static inline void mask_mips_irq(struct irq_data *d)
{
clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
irq_disable_hazard();
}
static struct irq_chip mips_cpu_irq_controller = {
.name = "MIPS",
.irq_ack = mask_mips_irq,
.irq_mask = mask_mips_irq,
.irq_mask_ack = mask_mips_irq,
.irq_unmask = unmask_mips_irq,
.irq_eoi = unmask_mips_irq,
};
/*
* Basically the same as above but taking care of all the MT stuff
*/
static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
{
unsigned int vpflags = dvpe();
clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
unmask_mips_irq(d);
return 0;
}
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
* to deal with concurrency issues. Same for mips_cpu_irq_end.
*/
static void mips_mt_cpu_irq_ack(struct irq_data *d)
{
unsigned int vpflags = dvpe();
clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
mask_mips_irq(d);
}
static struct irq_chip mips_mt_cpu_irq_controller = {
.name = "MIPS",
.irq_startup = mips_mt_cpu_irq_startup,
.irq_ack = mips_mt_cpu_irq_ack,
.irq_mask = mask_mips_irq,
.irq_mask_ack = mips_mt_cpu_irq_ack,
.irq_unmask = unmask_mips_irq,
.irq_eoi = unmask_mips_irq,
};
void __init mips_cpu_irq_init(void)
{
int irq_base = MIPS_CPU_IRQ_BASE;
int i;
/* Mask interrupts. */
clear_c0_status(ST0_IM);
clear_c0_cause(CAUSEF_IP);
/* Software interrupts are used for MT/CMT IPI */
for (i = irq_base; i < irq_base + 2; i++)
irq_set_chip_and_handler(i, cpu_has_mipsmt ?
&mips_mt_cpu_irq_controller :
&mips_cpu_irq_controller,
handle_percpu_irq);
for (i = irq_base + 2; i < irq_base + 8; i++)
irq_set_chip_and_handler(i, &mips_cpu_irq_controller,
handle_percpu_irq);
}
|
