1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
/*
* OpenRISC irq.c
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/ftrace.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/irqflags.h>
/* read interrupt enabled status */
unsigned long arch_local_save_flags(void)
{
return mfspr(SPR_SR) & (SPR_SR_IEE|SPR_SR_TEE);
}
EXPORT_SYMBOL(arch_local_save_flags);
/* set interrupt enabled status */
void arch_local_irq_restore(unsigned long flags)
{
mtspr(SPR_SR, ((mfspr(SPR_SR) & ~(SPR_SR_IEE|SPR_SR_TEE)) | flags));
}
EXPORT_SYMBOL(arch_local_irq_restore);
/* OR1K PIC implementation */
/* We're a couple of cycles faster than the generic implementations with
* these 'fast' versions.
*/
static void or1k_pic_mask(struct irq_data *data)
{
mtspr(SPR_PICMR, mfspr(SPR_PICMR) & ~(1UL << data->irq));
}
static void or1k_pic_unmask(struct irq_data *data)
{
mtspr(SPR_PICMR, mfspr(SPR_PICMR) | (1UL << data->irq));
}
static void or1k_pic_ack(struct irq_data *data)
{
/* EDGE-triggered interrupts need to be ack'ed in order to clear
* the latch.
* LEVER-triggered interrupts do not need to be ack'ed; however,
* ack'ing the interrupt has no ill-effect and is quicker than
* trying to figure out what type it is...
*/
/* The OpenRISC 1000 spec says to write a 1 to the bit to ack the
* interrupt, but the OR1200 does this backwards and requires a 0
* to be written...
*/
#ifdef CONFIG_OR1K_1200
/* There are two oddities with the OR1200 PIC implementation:
* i) LEVEL-triggered interrupts are latched and need to be cleared
* ii) the interrupt latch is cleared by writing a 0 to the bit,
* as opposed to a 1 as mandated by the spec
*/
mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->irq));
#else
WARN(1, "Interrupt handling possibily broken\n");
mtspr(SPR_PICSR, (1UL << irq));
#endif
}
static void or1k_pic_mask_ack(struct irq_data *data)
{
/* Comments for pic_ack apply here, too */
#ifdef CONFIG_OR1K_1200
mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->irq));
#else
WARN(1, "Interrupt handling possibily broken\n");
mtspr(SPR_PICSR, (1UL << irq));
#endif
}
#if 0
static int or1k_pic_set_type(struct irq_data *data, unsigned int flow_type)
{
/* There's nothing to do in the PIC configuration when changing
* flow type. Level and edge-triggered interrupts are both
* supported, but it's PIC-implementation specific which type
* is handled. */
return irq_setup_alt_chip(data, flow_type);
}
#endif
static struct irq_chip or1k_dev = {
.name = "or1k-PIC",
.irq_unmask = or1k_pic_unmask,
.irq_mask = or1k_pic_mask,
.irq_ack = or1k_pic_ack,
.irq_mask_ack = or1k_pic_mask_ack,
};
static struct irq_domain *root_domain;
static inline int pic_get_irq(int first)
{
int hwirq;
hwirq = ffs(mfspr(SPR_PICSR) >> first);
if (!hwirq)
return NO_IRQ;
else
hwirq = hwirq + first -1;
return irq_find_mapping(root_domain, hwirq);
}
static int or1k_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
irq_set_chip_and_handler_name(irq, &or1k_dev,
handle_level_irq, "level");
irq_set_status_flags(irq, IRQ_LEVEL | IRQ_NOPROBE);
return 0;
}
static const struct irq_domain_ops or1k_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
.map = or1k_map,
};
/*
* This sets up the IRQ domain for the PIC built in to the OpenRISC
* 1000 CPU. This is the "root" domain as these are the interrupts
* that directly trigger an exception in the CPU.
*/
static void __init or1k_irq_init(void)
{
struct device_node *intc = NULL;
/* The interrupt controller device node is mandatory */
intc = of_find_compatible_node(NULL, NULL, "opencores,or1k-pic");
BUG_ON(!intc);
/* Disable all interrupts until explicitly requested */
mtspr(SPR_PICMR, (0UL));
root_domain = irq_domain_add_linear(intc, 32,
&or1k_irq_domain_ops, NULL);
}
void __init init_IRQ(void)
{
or1k_irq_init();
}
void __irq_entry do_IRQ(struct pt_regs *regs)
{
int irq = -1;
struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
while ((irq = pic_get_irq(irq + 1)) != NO_IRQ)
generic_handle_irq(irq);
irq_exit();
set_irq_regs(old_regs);
}
|
