1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
/*
* Freescale Media5200 board Device Tree Source
*
* Copyright 2009 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
* Steven Cavanagh <scavanagh@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
/ {
model = "fsl,media5200";
compatible = "fsl,media5200";
aliases {
console = &console;
ethernet0 = ð0;
};
chosen {
linux,stdout-path = &console;
};
cpus {
PowerPC,5200@0 {
timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
bus-frequency = <132000000>; // 132 MHz
clock-frequency = <396000000>; // 396 MHz
};
};
memory {
reg = <0x00000000 0x08000000>; // 128MB RAM
};
soc5200@f0000000 {
bus-frequency = <132000000>;// 132 MHz
timer@600 { // General Purpose Timer
fsl,has-wdt;
};
psc@2000 { // PSC1
status = "disabled";
};
psc@2200 { // PSC2
status = "disabled";
};
psc@2400 { // PSC3
status = "disabled";
};
psc@2600 { // PSC4
status = "disabled";
};
psc@2800 { // PSC5
status = "disabled";
};
// PSC6 in uart mode
console: psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
usb@1000 {
reg = <0x1000 0x100>;
};
};
pci@f0000d00 {
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
0xc000 0 0 2 &media5200_fpga 0 3
0xc000 0 0 3 &media5200_fpga 0 4
0xc000 0 0 4 &media5200_fpga 0 5
0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
0xc800 0 0 2 &media5200_fpga 0 4
0xc800 0 0 3 &media5200_fpga 0 5
0xc800 0 0 4 &media5200_fpga 0 2
0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
0xd000 0 0 2 &media5200_fpga 0 5
0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
interrupt-parent = <&mpc5200_pic>;
};
localbus {
ranges = < 0 0 0xfc000000 0x02000000
1 0 0xfe000000 0x02000000
2 0 0xf0010000 0x00010000
3 0 0xf0020000 0x00010000 >;
flash@0,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
reg = <0 0x0 0x2000000>; // 32 MB
bank-width = <4>; // Width in bytes of the flash bank
device-width = <2>; // Two devices on each bank
};
flash@1,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
reg = <1 0 0x2000000>; // 32 MB
bank-width = <4>; // Width in bytes of the flash bank
device-width = <2>; // Two devices on each bank
};
media5200_fpga: fpga@2,0 {
compatible = "fsl,media5200-fpga";
interrupt-controller;
#interrupt-cells = <2>; // 0:bank 1:id; no type field
reg = <2 0 0x10000>;
interrupt-parent = <&mpc5200_pic>;
interrupts = <0 0 3 // IRQ bank 0
1 1 3>; // IRQ bank 1
};
uart@3,0 {
compatible = "ti,tl16c752bpt";
reg = <3 0 0x10000>;
interrupt-parent = <&media5200_fpga>;
interrupts = <0 0 0 1>; // 2 irqs
};
};
};
|
