1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
|
/*
* Platform setup for the Freescale mpc885ads board
*
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright 2005 MontaVista Software Inc.
*
* Heavily modified by Scott Wood <scottwood@freescale.com>
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/fsl_devices.h>
#include <linux/mii.h>
#include <linux/of_platform.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
#include "mpc885ads.h"
#include "mpc8xx.h"
static u32 __iomem *bcsr, *bcsr5;
#ifdef CONFIG_PCMCIA_M8XX
static void pcmcia_hw_setup(int slot, int enable)
{
if (enable)
clrbits32(&bcsr[1], BCSR1_PCCEN);
else
setbits32(&bcsr[1], BCSR1_PCCEN);
}
static int pcmcia_set_voltage(int slot, int vcc, int vpp)
{
u32 reg = 0;
switch (vcc) {
case 0:
break;
case 33:
reg |= BCSR1_PCCVCC0;
break;
case 50:
reg |= BCSR1_PCCVCC1;
break;
default:
return 1;
}
switch (vpp) {
case 0:
break;
case 33:
case 50:
if (vcc == vpp)
reg |= BCSR1_PCCVPP1;
else
return 1;
break;
case 120:
if ((vcc == 33) || (vcc == 50))
reg |= BCSR1_PCCVPP0;
else
return 1;
default:
return 1;
}
/* first, turn off all power */
clrbits32(&bcsr[1], 0x00610000);
/* enable new powersettings */
setbits32(&bcsr[1], reg);
return 0;
}
#endif
struct cpm_pin {
int port, pin, flags;
};
static struct cpm_pin mpc885ads_pins[] = {
/* SMC1 */
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
/* SMC2 */
#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
#endif
/* SCC3 */
{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
/* MII1 */
{CPM_PORTA, 0, CPM_PIN_INPUT},
{CPM_PORTA, 1, CPM_PIN_INPUT},
{CPM_PORTA, 2, CPM_PIN_INPUT},
{CPM_PORTA, 3, CPM_PIN_INPUT},
{CPM_PORTA, 4, CPM_PIN_OUTPUT},
{CPM_PORTA, 10, CPM_PIN_OUTPUT},
{CPM_PORTA, 11, CPM_PIN_OUTPUT},
{CPM_PORTB, 19, CPM_PIN_INPUT},
{CPM_PORTB, 31, CPM_PIN_INPUT},
{CPM_PORTC, 12, CPM_PIN_INPUT},
{CPM_PORTC, 13, CPM_PIN_INPUT},
{CPM_PORTE, 30, CPM_PIN_OUTPUT},
{CPM_PORTE, 31, CPM_PIN_OUTPUT},
/* MII2 */
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 16, CPM_PIN_OUTPUT},
{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{CPM_PORTE, 21, CPM_PIN_OUTPUT},
{CPM_PORTE, 22, CPM_PIN_OUTPUT},
{CPM_PORTE, 23, CPM_PIN_OUTPUT},
{CPM_PORTE, 24, CPM_PIN_OUTPUT},
{CPM_PORTE, 25, CPM_PIN_OUTPUT},
{CPM_PORTE, 26, CPM_PIN_OUTPUT},
{CPM_PORTE, 27, CPM_PIN_OUTPUT},
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
#endif
/* I2C */
{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
struct cpm_pin *pin = &mpc885ads_pins[i];
cpm1_set_pin(pin->port, pin->pin, pin->flags);
}
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
/* Set FEC1 and FEC2 to MII mode */
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
}
static void __init mpc885ads_setup_arch(void)
{
struct device_node *np;
cpm_reset();
init_ioports();
np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
if (!np) {
printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
return;
}
bcsr = of_iomap(np, 0);
bcsr5 = of_iomap(np, 1);
of_node_put(np);
if (!bcsr || !bcsr5) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
clrbits32(&bcsr[1], BCSR1_RS232EN_1);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
setbits32(&bcsr[1], BCSR1_RS232EN_2);
#else
clrbits32(&bcsr[1], BCSR1_RS232EN_2);
#endif
clrbits32(bcsr5, BCSR5_MII1_EN);
setbits32(bcsr5, BCSR5_MII1_RST);
udelay(1000);
clrbits32(bcsr5, BCSR5_MII1_RST);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
clrbits32(bcsr5, BCSR5_MII2_EN);
setbits32(bcsr5, BCSR5_MII2_RST);
udelay(1000);
clrbits32(bcsr5, BCSR5_MII2_RST);
#else
setbits32(bcsr5, BCSR5_MII2_EN);
#endif
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
clrbits32(&bcsr[4], BCSR4_ETH10_RST);
udelay(1000);
setbits32(&bcsr[4], BCSR4_ETH10_RST);
setbits32(&bcsr[1], BCSR1_ETHEN);
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
#else
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
#endif
/* The SCC3 enet registers overlap the SMC1 registers, so
* one of the two must be removed from the device tree.
*/
if (np) {
of_detach_node(np);
of_node_put(np);
}
#ifdef CONFIG_PCMCIA_M8XX
/* Set up board specific hook-ups.*/
m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
#endif
}
static int __init mpc885ads_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
}
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
{},
};
static int __init declare_of_platform_devices(void)
{
/* Publish the QE devices */
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(mpc885_ads, declare_of_platform_devices);
define_machine(mpc885_ads) {
.name = "Freescale MPC885 ADS",
.probe = mpc885ads_probe,
.setup_arch = mpc885ads_setup_arch,
.init_IRQ = mpc8xx_pics_init,
.get_irq = mpc8xx_get_irq,
.restart = mpc8xx_restart,
.calibrate_decr = mpc8xx_calibrate_decr,
.set_rtc_time = mpc8xx_set_rtc_time,
.get_rtc_time = mpc8xx_get_rtc_time,
.progress = udbg_progress,
};
|
