path: root/arch/powerpc/platforms/cell/spufs/run.c

#define DEBUG

#include <linux/wait.h>
#include <linux/ptrace.h>

#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/io.h>
#include <asm/unistd.h>

#include "spufs.h"

/* interrupt-level stop callback function. */
void spufs_stop_callback(struct spu *spu)
{
	struct spu_context *ctx = spu->ctx;

	wake_up_all(&ctx->stop_wq);
}

static inline int spu_stopped(struct spu_context *ctx, u32 *stat)
{
	struct spu *spu;
	u64 pte_fault;

	*stat = ctx->ops->status_read(ctx);

	spu = ctx->spu;
	if (ctx->state != SPU_STATE_RUNNABLE ||
	    test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
		return 1;
	pte_fault = spu->dsisr &
	    (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED);
	return (!(*stat & SPU_STATUS_RUNNING) || pte_fault || spu->class_0_pending) ?
		1 : 0;
}

static int spu_setup_isolated(struct spu_context *ctx)
{
	int ret;
	u64 __iomem *mfc_cntl;
	u64 sr1;
	u32 status;
	unsigned long timeout;
	const u32 status_loading = SPU_STATUS_RUNNING
		| SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS;

	ret = -ENODEV;
	if (!isolated_loader)
		goto out;

	/*
	 * We need to exclude userspace access to the context.
	 *
	 * To protect against memory access we invalidate all ptes
	 * and make sure the pagefault handlers block on the mutex.
	 */
	spu_unmap_mappings(ctx);

	mfc_cntl = &ctx->spu->priv2->mfc_control_RW;

	/* purge the MFC DMA queue to ensure no spurious accesses before we
	 * enter kernel mode */
	timeout = jiffies + HZ;
	out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST);
	while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK)
			!= MFC_CNTL_PURGE_DMA_COMPLETE) {
		if (time_after(jiffies, timeout)) {
			printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
					__FUNCTION__);
			ret = -EIO;
			goto out;
		}
		cond_resched();
	}

	/* put the SPE in kernel mode to allow access to the loader */
	sr1 = spu_mfc_sr1_get(ctx->spu);
	sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK;
	spu_mfc_sr1_set(ctx->spu, sr1);

	/* start the loader */
	ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32);
	ctx->ops->signal2_write(ctx,
			(unsigned long)isolated_loader & 0xffffffff);

	ctx->ops->runcntl_write(ctx,
			SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);

	ret = 0;
	timeout = jiffies + HZ;
	while (((status = ctx->ops->status_read(ctx)) & status_loading) ==
				status_loading) {
		if (time_after(jiffies, timeout)) {
			printk(KERN_ERR "%s: timeout waiting for loader\n",
					__FUNCTION__);
			ret = -EIO;
			goto out_drop_priv;
		}
		cond_resched();
	}

	if (!(status & SPU_STATUS_RUNNING)) {
		/* If isolated LOAD has failed: run SPU, we will get a stop-and
		 * signal later. */
		pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
		ret = -EACCES;
		goto out_drop_priv;
	}

	if (!(status & SPU_STATUS_ISOLATED_STATE)) {
		/* This isn't allowed by the CBEA, but check anyway */
		pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
		ret = -EINVAL;
		goto out_drop_priv;
	}

out_drop_priv:
	/* Finished accessing the loader. Drop kernel mode */
	sr1 |= MFC_STATE1_PROBLEM_STATE_MASK;
	spu_mfc_sr1_set(ctx->spu, sr1);

out:
	return ret;
}

static int spu_run_init(struct spu_context *ctx, u32 *npc)
{
	spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);

	if (ctx->flags & SPU_CREATE_ISOLATE) {
		unsigned long runcntl;

		if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) {
			int ret = spu_setup_isolated(ctx);
			if (ret)
				return ret;
		}

		/* if userspace has set the runcntrl register (eg, to issue an
		 * isolated exit), we need to re-set it here */
		runcntl = ctx->ops->runcntl_read(ctx) &
			(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
		if (runcntl == 0)
			runcntl = SPU_RUNCNTL_RUNNABLE;
		ctx->ops->runcntl_write(ctx, runcntl);
	} else {
		unsigned long mode = SPU_PRIVCNTL_MODE_NORMAL;
		ctx->ops->npc_write(ctx, *npc);
		if (test_thread_flag(TIF_SINGLESTEP))
			mode = SPU_PRIVCNTL_MODE_SINGLE_STEP;
		out_be64(&ctx->spu->priv2->spu_privcntl_RW, mode);
		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
	}

	spuctx_switch_state(ctx, SPU_UTIL_USER);

	return 0;
}

static int spu_run_fini(struct spu_context *ctx, u32 *npc,
			       u32 *status)
{
	int ret = 0;

	*status = ctx->ops->status_read(ctx);
	*npc = ctx->ops->npc_read(ctx);

	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
	spu_release(ctx);

	if (signal_pending(current))
		ret = -ERESTARTSYS;

	return ret;
}

static int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc,
				         u32 *status)
{
	int ret;

	ret = spu_run_fini(ctx, npc, status);
	if (ret)
		return ret;

	if (*status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT))
		return *status;

	ret = spu_acquire_runnable(ctx, 0);
	if (ret)
		return ret;

	spuctx_switch_state(ctx, SPU_UTIL_USER);
	return 0;
}

/*
 * SPU syscall restarting is tricky because we violate the basic
 * assumption that the signal handler is running on the interrupted
 * thread. Here instead, the handler runs on PowerPC user space code,
 * while the syscall was called from the SPU.
 * This means we can only do a very rough approximation of POSIX
 * signal semantics.
 */
int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret,
			  unsigned int *npc)
{
	int ret;

	switch (*spu_ret) {
	case -ERESTARTSYS:
	case -ERESTARTNOINTR:
		/*
		 * Enter the regular syscall restarting for
		 * sys_spu_run, then restart the SPU syscall
		 * callback.
		 */
		*npc -= 8;
		ret = -ERESTARTSYS;
		break;
	case -ERESTARTNOHAND:
	case -ERESTART_RESTARTBLOCK:
		/*
		 * Restart block is too hard for now, just return -EINTR
		 * to the SPU.
		 * ERESTARTNOHAND comes from sys_pause, we also return
		 * -EINTR from there.
		 * Assume that we need to be restarted ourselves though.
		 */
		*spu_ret = -EINTR;
		ret = -ERESTARTSYS;
		break;
	default:
		printk(KERN_WARNING "%s: unexpected return code %ld\n",
			__FUNCTION__, *spu_ret);
		ret = 0;
	}
	return ret;
}

int spu_process_callback(struct spu_context *ctx)
{
	struct spu_syscall_block s;
	u32 ls_pointer, npc;
	void __iomem *ls;
	long spu_ret;
	int ret;

	/* get syscall block from local store */
	npc = ctx->ops->npc_read(ctx) & ~3;
	ls = (void __iomem *)ctx->ops->get_ls(ctx);
	ls_pointer = in_be32(ls + npc);
	if (ls_pointer > (LS_SIZE - sizeof(s)))
		return -EFAULT;
	memcpy_fromio(&s, ls + ls_pointer, sizeof(s));

	/* do actual syscall without pinning the spu */
	ret = 0;
	spu_ret = -ENOSYS;
	npc += 4;

	if (s.nr_ret < __NR_syscalls) {
		spu_release(ctx);
		/* do actual system call from here */
		spu_ret = spu_sys_callback(&s);
		if (spu_ret <= -ERESTARTSYS) {
			ret = spu_handle_restartsys(ctx, &spu_ret, &npc);
		}
		spu_acquire(ctx);
		if (ret == -ERESTARTSYS)
			return ret;
	}

	/* write result, jump over indirect pointer */
	memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret));
	ctx->ops->npc_write(ctx, npc);
	ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
	return ret;
}

static inline int spu_process_events(struct spu_context *ctx)
{
	struct spu *spu = ctx->spu;
	int ret = 0;

	if (spu->class_0_pending)
		ret = spu_irq_class_0_bottom(spu);
	if (!ret && signal_pending(current))
		ret = -ERESTARTSYS;
	return ret;
}

long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
{
	int ret;
	struct spu *spu;
	u32 status;

	if (mutex_lock_interruptible(&ctx->run_mutex))
		return -ERESTARTSYS;

	ctx->ops->master_start(ctx);
	ctx->event_return = 0;

	spu_acquire(ctx);
	if (ctx->state == SPU_STATE_SAVED) {
		__spu_update_sched_info(ctx);
		spu_set_timeslice(ctx);

		ret = spu_activate(ctx, 0);
		if (ret) {
			spu_release(ctx);
			goto out;
		}
	} else {
		/*
		 * We have to update the scheduling priority under active_mutex
		 * to protect against find_victim().
		 *
		 * No need to update the timeslice ASAP, it will get updated
		 * once the current one has expired.
		 */
		spu_update_sched_info(ctx);
	}

	ret = spu_run_init(ctx, npc);
	if (ret) {
		spu_release(ctx);
		goto out;
	}

	do {
		ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, &status));
		if (unlikely(ret))
			break;
		spu = ctx->spu;
		if (unlikely(test_and_clear_bit(SPU_SCHED_NOTIFY_ACTIVE,
						&ctx->sched_flags))) {
			if (!(status & SPU_STATUS_STOPPED_BY_STOP)) {
				spu_switch_notify(spu, ctx);
				continue;
			}
		}

		spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);

		if ((status & SPU_STATUS_STOPPED_BY_STOP) &&
		    (status >> SPU_STOP_STATUS_SHIFT == 0x2104)) {
			ret = spu_process_callback(ctx);
			if (ret)
				break;
			status &= ~SPU_STATUS_STOPPED_BY_STOP;
		}
		ret = spufs_handle_class1(ctx);
		if (ret)
			break;

		if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
			ret = spu_reacquire_runnable(ctx, npc, &status);
			if (ret)
				goto out2;
			continue;
		}
		ret = spu_process_events(ctx);

	} while (!ret && !(status & (SPU_STATUS_STOPPED_BY_STOP |
				      SPU_STATUS_STOPPED_BY_HALT |
				       SPU_STATUS_SINGLE_STEP)));

	if ((status & SPU_STATUS_STOPPED_BY_STOP) &&
	    (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100) &&
	    (ctx->state == SPU_STATE_RUNNABLE))
		ctx->stats.libassist++;


	ctx->ops->master_stop(ctx);
	ret = spu_run_fini(ctx, npc, &status);
	spu_yield(ctx);

out2:
	if ((ret == 0) ||
	    ((ret == -ERESTARTSYS) &&
	     ((status & SPU_STATUS_STOPPED_BY_HALT) ||
	      (status & SPU_STATUS_SINGLE_STEP) ||
	      ((status & SPU_STATUS_STOPPED_BY_STOP) &&
	       (status >> SPU_STOP_STATUS_SHIFT != 0x2104)))))
		ret = status;

	/* Note: we don't need to force_sig SIGTRAP on single-step
	 * since we have TIF_SINGLESTEP set, thus the kernel will do
	 * it upon return from the syscall anyawy
	 */
	if ((status & SPU_STATUS_STOPPED_BY_STOP)
	    && (status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) {
		force_sig(SIGTRAP, current);
		ret = -ERESTARTSYS;
	}

out:
	*event = ctx->event_return;
	mutex_unlock(&ctx->run_mutex);
	return ret;
}