blob: 049c767d33e7a682d70657527e187d9e7521be06 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
/*
* arch/ppc/platforms/4xx/virtex.h
*
* Include file that defines the Xilinx Virtex-II Pro processor
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is licensed
* "as is" without any warranty of any kind, whether express or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_VIRTEX_H__
#define __ASM_VIRTEX_H__
#include <linux/config.h>
#include <platforms/4xx/xparameters/xparameters.h>
/* serial defines */
#define RS_TABLE_SIZE 4 /* change this and add more devices below
if you have more then 4 16x50 UARTs */
#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
/* The serial ports in the Virtex-II Pro have each I/O byte in the
* LSByte of a word. This means that iomem_reg_shift needs to be 2 to
* change the byte offsets into word offsets. In addition the base
* addresses need to have 3 added to them to get to the LSByte.
*/
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
ASYNC_BOOT_AUTOCONF, \
.iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
.iomem_reg_shift = 2, \
.io_type = SERIAL_IO_MEM},
#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
#define ML300_UART0 STD_UART_OP(0)
#else
#define ML300_UART0
#endif
#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
#define ML300_UART1 STD_UART_OP(1)
#else
#define ML300_UART1
#endif
#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
#define ML300_UART2 STD_UART_OP(2)
#else
#define ML300_UART2
#endif
#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
#define ML300_UART3 STD_UART_OP(3)
#else
#define ML300_UART3
#endif
#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
#error Edit this file to add more devices.
#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
#define NR_SER_PORTS 4
#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
#define NR_SER_PORTS 3
#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
#define NR_SER_PORTS 2
#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
#define NR_SER_PORTS 1
#else
#define NR_SER_PORTS 0
#endif
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_PORT_DFNS \
ML300_UART0 \
ML300_UART1 \
ML300_UART2 \
ML300_UART3
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_PORT_DFNS \
ML300_UART1 \
ML300_UART0 \
ML300_UART2 \
ML300_UART3
#endif
#define DCRN_CPMFR_BASE 0
#include <asm/ibm405.h>
#endif /* __ASM_VIRTEX_H__ */
#endif /* __KERNEL__ */
|
