summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/mpc885ads_setup.c
blob: ba06cc08cdab7740da0838c3c6d7424aec0ac371 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
/*arch/ppc/platforms/mpc885ads_setup.c
 *
 * Platform setup for the Freescale mpc885ads board
 *
 * Vitaly Bordug <vbordug@ru.mvista.com>
 *
 * Copyright 2005 MontaVista Software Inc.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2. This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>

#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>

#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/ppcboot.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/ppc_sys.h>

extern unsigned char __res[];
static void setup_smc1_ioports(struct fs_uart_platform_info*);
static void setup_smc2_ioports(struct fs_uart_platform_info*);

static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
static void setup_fec1_ioports(struct fs_platform_info*);
static void setup_fec2_ioports(struct fs_platform_info*);
static void setup_scc3_ioports(struct fs_platform_info*);

static struct fs_uart_platform_info mpc885_uart_pdata[] = {
	[fsid_smc1_uart] = {
		.brg		= 1,
 		.fs_no 		= fsid_smc1_uart,
 		.init_ioports	= setup_smc1_ioports,
		.tx_num_fifo	= 4,
		.tx_buf_size	= 32,
		.rx_num_fifo	= 4,
		.rx_buf_size	= 32,
 	},
 	[fsid_smc2_uart] = {
 		.brg		= 2,
 		.fs_no 		= fsid_smc2_uart,
 		.init_ioports	= setup_smc2_ioports,
		.tx_num_fifo	= 4,
		.tx_buf_size	= 32,
		.rx_num_fifo	= 4,
		.rx_buf_size	= 32,
 	},
};

static struct fs_platform_info mpc8xx_enet_pdata[] = {
	[fsid_fec1] = {
	 .rx_ring = 128,
	 .tx_ring = 16,
	 .rx_copybreak = 240,

	 .use_napi = 1,
	 .napi_weight = 17,

	 .init_ioports = setup_fec1_ioports,

          .bus_id = "0:00",
          .has_phy = 1,
	 },
	[fsid_fec2] = {
	     .rx_ring = 128,
	     .tx_ring = 16,
	     .rx_copybreak = 240,

	     .use_napi = 1,
	     .napi_weight = 17,

	     .init_ioports = setup_fec2_ioports,

 	     .bus_id = "0:01",
 	     .has_phy = 1,
	     },
	[fsid_scc3] = {
		.rx_ring = 64,
		.tx_ring = 8,
		.rx_copybreak = 240,

		.use_napi = 1,
		.napi_weight = 17,

		.init_ioports = setup_scc3_ioports,
#ifdef CONFIG_FIXED_MII_10_FDX
		.bus_id = "fixed@100:1",
#else
		.bus_id = "0:02",
 #endif
	},
};

void __init board_init(void)
{
	cpm8xx_t *cp = cpmp;
 	unsigned int *bcsr_io;

#ifdef CONFIG_FS_ENET
	immap_t *immap = (immap_t *) IMAP_ADDR;
#endif
	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));

	if (bcsr_io == NULL) {
		printk(KERN_CRIT "Could not remap BCSR\n");
		return;
	}
#ifdef CONFIG_SERIAL_CPM_SMC1
	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
	clrbits32(bcsr_io, BCSR1_RS232EN_1);
        cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
        cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
	setbits32(bcsr_io,BCSR1_RS232EN_1);
	cp->cp_smc[0].smc_smcmr = 0;
	cp->cp_smc[0].smc_smce = 0;
#endif

#ifdef CONFIG_SERIAL_CPM_SMC2
	cp->cp_simode &= ~(0xe0000000 >> 1);
	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
	clrbits32(bcsr_io,BCSR1_RS232EN_2);
        cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
        cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
	setbits32(bcsr_io,BCSR1_RS232EN_2);
	cp->cp_smc[1].smc_smcmr = 0;
	cp->cp_smc[1].smc_smce = 0;
#endif
	iounmap(bcsr_io);

#ifdef CONFIG_FS_ENET
	/* use MDC for MII (common) */
	setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
	clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
	bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
	clrbits32(bcsr_io,BCSR5_MII1_EN);
	clrbits32(bcsr_io,BCSR5_MII1_RST);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
	clrbits32(bcsr_io,BCSR5_MII2_EN);
	clrbits32(bcsr_io,BCSR5_MII2_RST);
#endif
	iounmap(bcsr_io);
#endif
}

static void setup_fec1_ioports(struct fs_platform_info* pdata)
{
	immap_t *immap = (immap_t *) IMAP_ADDR;

	/* configure FEC1 pins  */
	setbits16(&immap->im_ioport.iop_papar, 0xf830);
	setbits16(&immap->im_ioport.iop_padir, 0x0830);
	clrbits16(&immap->im_ioport.iop_padir, 0xf000);
	setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);

	clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
	setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
	clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
	setbits32(&immap->im_cpm.cp_pepar, 0x00000003);

	setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
	clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
	clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
}

static void setup_fec2_ioports(struct fs_platform_info* pdata)
{
	immap_t *immap = (immap_t *) IMAP_ADDR;

	/* configure FEC2 pins */
	setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
	setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
	clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
	setbits32(&immap->im_cpm.cp_peso, 0x00037800);
	clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
}

static void setup_scc3_ioports(struct fs_platform_info* pdata)
{
	immap_t *immap = (immap_t *) IMAP_ADDR;
	unsigned *bcsr_io;

	bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);

	if (bcsr_io == NULL) {
		printk(KERN_CRIT "Could not remap BCSR\n");
		return;
	}

	/* Enable the PHY.
	 */
	clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
	udelay(1000);
	setbits32(bcsr_io+4, BCSR4_ETH10_RST);
	/* Configure port A pins for Txd and Rxd.
	 */
	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);

	/* Configure port C pins to enable CLSN and RENA.
	 */
	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);

	/* Configure port E for TCLK and RCLK.
	 */
	setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
	clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
	clrbits32(&immap->im_cpm.cp_pedir,
		  PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
	clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
	setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);

	/* Configure Serial Interface clock routing.
	 * First, clear all SCC bits to zero, then set the ones we want.
	 */
	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);

	/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
	 */
	immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
	/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
	 * by H/W setting after reset. SCC ethernet controller support only half duplex.
	 * This discrepancy of modes causes a lot of carrier lost errors.
	 */

	/* In the original SCC enet driver the following code is placed at
	   the end of the initialization */
	setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
	clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
	setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);

	setbits32(bcsr_io+4, BCSR1_ETHEN);
	iounmap(bcsr_io);
}

static int mac_count = 0;

static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
{
 	struct fs_platform_info *fpi;
	bd_t *bd = (bd_t *) __res;
	char *e;
	int i;

	if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
		return;
	}

	fpi = &mpc8xx_enet_pdata[fs_no];

	switch (fs_no) {
	case fsid_fec1:
		fpi->init_ioports = &setup_fec1_ioports;
		break;
	case fsid_fec2:
		fpi->init_ioports = &setup_fec2_ioports;
		break;
	case fsid_scc3:
		fpi->init_ioports = &setup_scc3_ioports;
		break;
	default:
    	        printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
	        return;
	}

	pdev->dev.platform_data = fpi;
	fpi->fs_no = fs_no;

	e = (unsigned char *)&bd->bi_enetaddr;
	for (i = 0; i < 6; i++)
		fpi->macaddr[i] = *e++;

	fpi->macaddr[5] += mac_count++;

}

static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
					   int idx)
{
	/* This is for FEC devices only */
	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
		return;
	mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
}

static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
						  int idx)
{
	/* This is for SCC devices only */
	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
		return;

	mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}

static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
{
        immap_t *immap = (immap_t *) IMAP_ADDR;
        unsigned *bcsr_io;
        unsigned int iobits = 0x000000c0;

        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));

        if (bcsr_io == NULL) {
                printk(KERN_CRIT "Could not remap BCSR1\n");
                return;
        }
        clrbits32(bcsr_io,BCSR1_RS232EN_1);
        iounmap(bcsr_io);

        setbits32(&immap->im_cpm.cp_pbpar, iobits);
        clrbits32(&immap->im_cpm.cp_pbdir, iobits);
        clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}

static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
{
        immap_t *immap = (immap_t *) IMAP_ADDR;
        unsigned *bcsr_io;
        unsigned int iobits = 0x00000c00;

        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));

        if (bcsr_io == NULL) {
                printk(KERN_CRIT "Could not remap BCSR1\n");
                return;
        }
        clrbits32(bcsr_io,BCSR1_RS232EN_2);
        iounmap(bcsr_io);

#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
        setbits32(&immap->im_cpm.cp_pbpar, iobits);
        clrbits32(&immap->im_cpm.cp_pbdir, iobits);
        clrbits16(&immap->im_cpm.cp_pbodr, iobits);
#else
        setbits16(&immap->im_ioport.iop_papar, iobits);
        clrbits16(&immap->im_ioport.iop_padir, iobits);
        clrbits16(&immap->im_ioport.iop_paodr, iobits);
#endif
}

static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
                                              int idx)
{
	bd_t *bd = (bd_t *) __res;
	struct fs_uart_platform_info *pinfo;
	int num = ARRAY_SIZE(mpc885_uart_pdata);

	int id = fs_uart_id_smc2fsid(idx);

	/* no need to alter anything if console */
	if ((id < num) && (!pdev->dev.platform_data)) {
		pinfo = &mpc885_uart_pdata[id];
		pinfo->uart_clk = bd->bi_intfreq;
		pdev->dev.platform_data = pinfo;
	}
}


static int mpc885ads_platform_notify(struct device *dev)
{

	static const struct platform_notify_dev_map dev_map[] = {
		{
			.bus_id = "fsl-cpm-fec",
			.rtn = mpc885ads_fixup_fec_enet_pdata,
		},
		{
			.bus_id = "fsl-cpm-scc",
			.rtn = mpc885ads_fixup_scc_enet_pdata,
		},
		{
			.bus_id = "fsl-cpm-smc:uart",
			.rtn = mpc885ads_fixup_uart_pdata
		},
		{
			.bus_id = NULL
		}
	};

	platform_notify_map(dev_map,dev);

	return 0;
}

int __init mpc885ads_init(void)
{
	struct fs_mii_fec_platform_info* fmpi;
	bd_t *bd = (bd_t *) __res;

	printk(KERN_NOTICE "mpc885ads: Init\n");

	platform_notify = mpc885ads_platform_notify;

	ppc_sys_device_initfunc();
	ppc_sys_device_disable_all();

	ppc_sys_device_enable(MPC8xx_CPM_FEC1);

	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
		&mpc8xx_mdio_fec_pdata;

	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;

	/* No PHY interrupt line here */
	fmpi->irq[0xf] = SIU_IRQ7;

#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
	ppc_sys_device_enable(MPC8xx_CPM_SCC3);

#endif
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
	ppc_sys_device_enable(MPC8xx_CPM_FEC2);
#endif

#ifdef CONFIG_SERIAL_CPM_SMC1
	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
#endif

#ifdef CONFIG_SERIAL_CPM_SMC2
	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
	return 0;
}

arch_initcall(mpc885ads_init);

/*
   To prevent confusion, console selection is gross:
   by 0 assumed SMC1 and by 1 assumed SMC2
 */
struct platform_device* early_uart_get_pdev(int index)
{
	bd_t *bd = (bd_t *) __res;
	struct fs_uart_platform_info *pinfo;

	struct platform_device* pdev = NULL;
	if(index) { /*assume SMC2 here*/
		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
		pinfo = &mpc885_uart_pdata[1];
	} else { /*over SMC1*/
		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
		pinfo = &mpc885_uart_pdata[0];
	}

	pinfo->uart_clk = bd->bi_intfreq;
	pdev->dev.platform_data = pinfo;
	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
	return NULL;
}