1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
/*
* Low-Level PCI Support for the SH7780
*
* Copyright (C) 2005 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include "pci-sh4.h"
extern u8 pci_cache_line_size;
static struct resource sh7785_io_resource = {
.name = "SH7785_IO",
.start = SH7780_PCI_IO_BASE,
.end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7785_mem_resource = {
.name = "SH7785_mem",
.start = SH7780_PCI_MEMORY_BASE,
.end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
static struct pci_channel sh7780_pci_controller = {
.pci_ops = &sh4_pci_ops,
.mem_resource = &sh7785_mem_resource,
.mem_offset = 0x00000000,
.io_resource = &sh7785_io_resource,
.io_offset = 0x00000000,
};
static struct sh4_pci_address_map sh7780_pci_map = {
.window0 = {
#if defined(CONFIG_32BIT)
.base = SH7780_32BIT_DDR_BASE_ADDR,
.size = 0x40000000,
#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
#endif
},
};
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
unsigned int id;
const char *type = NULL;
int ret;
u32 word;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
chan->reg_base = 0xfe040000;
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
id = __raw_readw(chan->reg_base + SH7780_PCIVID);
if (id != SH7780_VENDOR_ID) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
id = __raw_readw(chan->reg_base + SH7780_PCIDID);
type = (id == SH7763_DEVICE_ID) ? "SH7763" :
(id == SH7780_DEVICE_ID) ? "SH7780" :
(id == SH7781_DEVICE_ID) ? "SH7781" :
(id == SH7785_DEVICE_ID) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
"controller, device id 0x%04x.\n", id);
return -EINVAL;
}
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
__raw_readb(chan->reg_base + SH7780_PCIRID));
if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;
/*
* Set the class and sub-class codes.
*/
__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
chan->reg_base + SH7780_PCIBCC);
__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
chan->reg_base + SH7780_PCISUB);
pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4;
/*
* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
/* Set up standard PCI config registers */
__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Apply any last-minute PCIC fixups */
pci_fixup_pcic(chan);
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
#ifdef CONFIG_32BIT
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Set IOBR for windows containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
SH7780_PCIIOBMR);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
pci_write_reg(chan, word, SH4_PCICR);
__set_io_port_base(SH7780_PCI_IO_BASE);
register_pci_controller(chan);
return 0;
}
arch_initcall(sh7780_pci_init);
|
