1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
|
/*
* arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
* FPGA implementation of V850E2/NA85E2C
*
* Copyright (C) 2002,03 NEC Electronics Corporation
* Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* Written by Miles Bader <miles@gnu.org>
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/bootmem.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <asm/atomic.h>
#include <asm/page.h>
#include <asm/machdep.h>
#include "mach.h"
extern void memcons_setup (void);
#define REG_DUMP_ADDR 0x220000
extern struct irqaction reg_snap_action; /* fwd decl */
void __init mach_early_init (void)
{
int i;
const u32 *src;
register u32 *dst asm ("ep");
extern u32 _intv_end, _intv_load_start;
/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
everything else 32-bit. */
V850E2_BSC = 0x2AA6;
for (i = 2; i <= 6; i++)
CSDEV(i) = 0; /* 32 bit */
/* Ensure that the simulator halts on a panic, instead of going
into an infinite loop inside the panic function. */
panic_timeout = -1;
/* Move the interrupt vectors into their real location. Note that
any relocations there are relative to the real location, so we
don't have to fix anything up. We use a loop instead of calling
memcpy to keep this a leaf function (to avoid a function
prologue being generated). */
dst = 0x10; /* &_intv_start + 0x10. */
src = &_intv_load_start;
do {
u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
dst += 8;
src += 8;
} while (dst < &_intv_end);
}
void __init mach_setup (char **cmdline)
{
memcons_setup ();
/* Setup up NMI0 to copy the registers to a known memory location.
The FGPA board has a button that produces NMI0 when pressed, so
this allows us to push the button, and then look at memory to see
what's in the registers (there's no other way to easily do so).
We have to use `setup_irq' instead of `request_irq' because it's
still too early to do memory allocation. */
setup_irq (IRQ_NMI (0), ®_snap_action);
}
void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
{
*ram_start = ERAM_ADDR;
*ram_len = ERAM_SIZE;
}
void __init mach_sched_init (struct irqaction *timer_action)
{
/* Setup up the timer interrupt. The FPGA peripheral control
registers _only_ work with single-bit writes (set1/clr1)! */
__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
/* We use the first RPU interrupt, which occurs every 8.192ms. */
setup_irq (IRQ_RPU (0), timer_action);
}
void mach_gettimeofday (struct timespec *tv)
{
tv->tv_sec = 0;
tv->tv_nsec = 0;
}
void machine_halt (void) __attribute__ ((noreturn));
void machine_halt (void)
{
for (;;) {
DWC(0) = 0x7777;
DWC(1) = 0x7777;
ASC = 0xffff;
FLGREG(0) = 1; /* Halt immediately. */
asm ("di; halt; nop; nop; nop; nop; nop");
}
}
EXPORT_SYMBOL(machine_halt);
void machine_restart (char *__unused)
{
machine_halt ();
}
EXPORT_SYMBOL(machine_restart);
void machine_power_off (void)
{
machine_halt ();
}
EXPORT_SYMBOL(machine_power_off);
/* Interrupts */
struct v850e_intc_irq_init irq_inits[] = {
{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
{ "RPU", IRQ_RPU(0), IRQ_RPU_NUM, 1, 6 },
{ 0 }
};
#define NUM_IRQ_INITS ((sizeof irq_inits / sizeof irq_inits[0]) - 1)
struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
/* Initialize interrupts. */
void __init mach_init_irqs (void)
{
v850e_intc_init_irq_types (irq_inits, hw_itypes);
}
/* An interrupt handler that copies the registers to a known memory location,
for debugging purposes. */
static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
{
(*(unsigned *)REG_DUMP_ADDR)++;
(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
}
static int reg_snap_dev_id;
static struct irqaction reg_snap_action = {
make_reg_snap, 0, CPU_MASK_NONE, "reg_snap", ®_snap_dev_id, 0
};
|
