path: root/drivers/acpi/acpica/acmacros.h

/******************************************************************************
 *
 * Name: acmacros.h - C macros for the entire subsystem.
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2012, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#ifndef __ACMACROS_H__
#define __ACMACROS_H__

/*
 * Extract data using a pointer. Any more than a byte and we
 * get into potential aligment issues -- see the STORE macros below.
 * Use with care.
 */
#define ACPI_GET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
#define ACPI_GET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
#define ACPI_GET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
#define ACPI_GET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
#define ACPI_SET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
#define ACPI_SET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
#define ACPI_SET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
#define ACPI_SET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)

/*
 * printf() format helpers
 */

/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */

#define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i), ACPI_LODWORD(i)

#if ACPI_MACHINE_WIDTH == 64
#define ACPI_FORMAT_NATIVE_UINT(i)      ACPI_FORMAT_UINT64(i)
#else
#define ACPI_FORMAT_NATIVE_UINT(i)      0, (i)
#endif

/*
 * Macros for moving data around to/from buffers that are possibly unaligned.
 * If the hardware supports the transfer of unaligned data, just do the store.
 * Otherwise, we have to move one byte at a time.
 */
#ifdef ACPI_BIG_ENDIAN
/*
 * Macros for big-endian machines
 */

/* These macros reverse the bytes during the move, converting little-endian to big endian */

			  /* Big Endian      <==        Little Endian */
			  /*  Hi...Lo                     Lo...Hi     */
/* 16-bit source, 16/32/64 destination */

#define ACPI_MOVE_16_TO_16(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
					   ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}

#define ACPI_MOVE_16_TO_32(d, s)        {(*(u32 *)(void *)(d))=0;\
							   ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
							   ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}

#define ACPI_MOVE_16_TO_64(d, s)        {(*(u64 *)(void *)(d))=0;\
									 ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
									 ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}

/* 32-bit source, 16/32/64 destination */

#define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */

#define ACPI_MOVE_32_TO_32(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}

#define ACPI_MOVE_32_TO_64(d, s)        {(*(u64 *)(void *)(d))=0;\
										   ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
										   ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
										   ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
										   ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}

/* 64-bit source, 16/32/64 destination */

#define ACPI_MOVE_64_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */

#define ACPI_MOVE_64_TO_32(d, s)        ACPI_MOVE_32_TO_32(d, s)	/* Truncate to 32 */

#define ACPI_MOVE_64_TO_64(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
										 ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
										 ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
										 ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
										 ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
#else
/*
 * Macros for little-endian machines
 */

#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED

/* The hardware supports unaligned transfers, just do the little-endian move */

/* 16-bit source, 16/32/64 destination */

#define ACPI_MOVE_16_TO_16(d, s)        *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
#define ACPI_MOVE_16_TO_32(d, s)        *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
#define ACPI_MOVE_16_TO_64(d, s)        *(u64 *)(void *)(d) = *(u16 *)(void *)(s)

/* 32-bit source, 16/32/64 destination */

#define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
#define ACPI_MOVE_32_TO_32(d, s)        *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
#define ACPI_MOVE_32_TO_64(d, s)        *(u64 *)(void *)(d) = *(u32 *)(void *)(s)

/* 64-bit source, 16/32/64 destination */

#define ACPI_MOVE_64_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
#define ACPI_MOVE_64_TO_32(d, s)        ACPI_MOVE_32_TO_32(d, s)	/* Truncate to 32 */
#define ACPI_MOVE_64_TO_64(d, s)        *(u64 *)(void *)(d) = *(u64 *)(void *)(s)

#else
/*
 * The hardware does not support unaligned transfers. We must move the
 * data one byte at a time. These macros work whether the source or
 * the destination (or both) is/are unaligned. (Little-endian move)
 */

/* 16-bit source, 16/32/64 destination */

#define ACPI_MOVE_16_TO_16(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}

#define ACPI_MOVE_16_TO_32(d, s)        {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);}
#define ACPI_MOVE_16_TO_64(d, s)        {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);}

/* 32-bit source, 16/32/64 destination */

#define ACPI_MOVE_32_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */

#define ACPI_MOVE_32_TO_32(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}

#define ACPI_MOVE_32_TO_64(d, s)        {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);}

/* 64-bit source, 16/32/64 destination */

#define ACPI_MOVE_64_TO_16(d, s)        ACPI_MOVE_16_TO_16(d, s)	/* Truncate to 16 */
#define ACPI_MOVE_64_TO_32(d, s)        ACPI_MOVE_32_TO_32(d, s)	/* Truncate to 32 */
#define ACPI_MOVE_64_TO_64(d, s)        {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
										 ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
										 ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
										 ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
										 ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
										 ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
										 ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
										 ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
#endif
#endif

/* Macros based on machine integer width */

#if ACPI_MACHINE_WIDTH == 32
#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_32_TO_16(d, s)

#elif ACPI_MACHINE_WIDTH == 64
#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_64_TO_16(d, s)

#else
#error unknown ACPI_MACHINE_WIDTH
#endif

/*
 * Fast power-of-two math macros for non-optimized compilers
 */
#define _ACPI_DIV(value, power_of2)      ((u32) ((value) >> (power_of2)))
#define _ACPI_MUL(value, power_of2)      ((u32) ((value) << (power_of2)))
#define _ACPI_MOD(value, divisor)        ((u32) ((value) & ((divisor) -1)))

#define ACPI_DIV_2(a)                   _ACPI_DIV(a, 1)
#define ACPI_MUL_2(a)                   _ACPI_MUL(a, 1)
#define ACPI_MOD_2(a)                   _ACPI_MOD(a, 2)

#define ACPI_DIV_4(a)                   _ACPI_DIV(a, 2)
#define ACPI_MUL_4(a)                   _ACPI_MUL(a, 2)
#define ACPI_MOD_4(a)                   _ACPI_MOD(a, 4)

#define ACPI_DIV_8(a)                   _ACPI_DIV(a, 3)
#define ACPI_MUL_8(a)                   _ACPI_MUL(a, 3)
#define ACPI_MOD_8(a)                   _ACPI_MOD(a, 8)

#define ACPI_DIV_16(a)                  _ACPI_DIV(a, 4)
#define ACPI_MUL_16(a)                  _ACPI_MUL(a, 4)
#define ACPI_MOD_16(a)                  _ACPI_MOD(a, 16)

#define ACPI_DIV_32(a)                  _ACPI_DIV(a, 5)
#define ACPI_MUL_32(a)                  _ACPI_MUL(a, 5)
#define ACPI_MOD_32(a)                  _ACPI_MOD(a, 32)

/*
 * Rounding macros (Power of two boundaries only)
 */
#define ACPI_ROUND_DOWN(value, boundary)     (((acpi_size)(value)) & \
						(~(((acpi_size) boundary)-1)))

#define ACPI_ROUND_UP(value, boundary)	     ((((acpi_size)(value)) + \
						(((acpi_size) boundary)-1)) & \
						(~(((acpi_size) boundary)-1)))

/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */

#define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a, 4)
#define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a, 8)
#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a, sizeof(acpi_size))

#define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a, 4)
#define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a, 8)
#define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a, sizeof(acpi_size))

#define ACPI_ROUND_BITS_UP_TO_BYTES(a)      ACPI_DIV_8((a) + 7)
#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)    ACPI_DIV_8((a))

#define ACPI_ROUND_UP_TO_1K(a)              (((a) + 1023) >> 10)

/* Generic (non-power-of-two) rounding */

#define ACPI_ROUND_UP_TO(value, boundary)   (((value) + ((boundary)-1)) / (boundary))

#define ACPI_IS_MISALIGNED(value)	    (((acpi_size) value) & (sizeof(acpi_size)-1))

/*
 * Bitmask creation
 * Bit positions start at zero.
 * MASK_BITS_ABOVE creates a mask starting AT the position and above
 * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
 */
#define ACPI_MASK_BITS_ABOVE(position)      (~((ACPI_UINT64_MAX) << ((u32) (position))))
#define ACPI_MASK_BITS_BELOW(position)      ((ACPI_UINT64_MAX) << ((u32) (position)))

/* Bitfields within ACPI registers */

#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)

#define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))

/*
 * A struct acpi_namespace_node can appear in some contexts
 * where a pointer to a union acpi_operand_object can also
 * appear. This macro is used to distinguish them.
 *
 * The "Descriptor" field is the first field in both structures.
 */
#define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
#define ACPI_SET_DESCRIPTOR_TYPE(d, t)  (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)

/*
 * Macros for the master AML opcode table
 */
#if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \
	{name, (u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type}
#else
#define ACPI_OP(name, Pargs, Iargs, obj_type, class, type, flags) \
	{(u32)(Pargs), (u32)(Iargs), (u32)(flags), obj_type, class, type}
#endif

#define ARG_TYPE_WIDTH                  5
#define ARG_1(x)                        ((u32)(x))
#define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
#define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
#define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
#define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
#define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))

#define ARGI_LIST1(a)                   (ARG_1(a))
#define ARGI_LIST2(a, b)                (ARG_1(b)|ARG_2(a))
#define ARGI_LIST3(a, b, c)             (ARG_1(c)|ARG_2(b)|ARG_3(a))
#define ARGI_LIST4(a, b, c, d)          (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
#define ARGI_LIST5(a, b, c, d, e)       (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
#define ARGI_LIST6(a, b, c, d, e, f)    (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))

#define ARGP_LIST1(a)                   (ARG_1(a))
#define ARGP_LIST2(a, b)                (ARG_1(a)|ARG_2(b))
#define ARGP_LIST3(a, b, c)             (ARG_1(a)|ARG_2(b)|ARG_3(c))
#define ARGP_LIST4(a, b, c, d)          (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
#define ARGP_LIST5(a, b, c, d, e)       (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
#define ARGP_LIST6(a, b, c, d, e, f)    (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))

#define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
#define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))

/*
 * Ascii error messages can be configured out
 */
#ifndef ACPI_NO_ERROR_MESSAGES

/*
 * Error reporting. Callers module and line number are inserted by AE_INFO,
 * the plist contains a set of parens to allow variable-length lists.
 * These macros are used for both the debug and non-debug versions of the code.
 */
#define ACPI_ERROR_NAMESPACE(s, e)      acpi_ut_namespace_error (AE_INFO, s, e);
#define ACPI_ERROR_METHOD(s, n, p, e)   acpi_ut_method_error (AE_INFO, s, n, p, e);
#define ACPI_WARN_PREDEFINED(plist)     acpi_ut_predefined_warning plist
#define ACPI_INFO_PREDEFINED(plist)     acpi_ut_predefined_info plist

#else

/* No error messages */

#define ACPI_ERROR_NAMESPACE(s, e)
#define ACPI_ERROR_METHOD(s, n, p, e)
#define ACPI_WARN_PREDEFINED(plist)
#define ACPI_INFO_PREDEFINED(plist)

#endif		/* ACPI_NO_ERROR_MESSAGES */

/*
 * Debug macros that are conditionally compiled
 */
#ifdef ACPI_DEBUG_OUTPUT

/*
 * Function entry tracing
 */
#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE

#define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
			  acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
#define ACPI_FUNCTION_TRACE_PTR(a, b)   ACPI_FUNCTION_NAME(a) \
					   acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS, (void *)b)
#define ACPI_FUNCTION_TRACE_U32(a, b)   ACPI_FUNCTION_NAME(a) \
							 acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS, (u32)b)
#define ACPI_FUNCTION_TRACE_STR(a, b)   ACPI_FUNCTION_NAME(a) \
									  acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS, (char *)b)

#define ACPI_FUNCTION_ENTRY()           acpi_ut_track_stack_ptr()

/*
 * Function exit tracing.
 * WARNING: These macros include a return statement. This is usually considered
 * bad form, but having a separate exit macro is very ugly and difficult to maintain.
 * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
 * so that "_AcpiFunctionName" is defined.
 *
 * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
 * about these constructs.
 */
#ifdef ACPI_USE_DO_WHILE_0
#define ACPI_DO_WHILE0(a)               do a while(0)
#else
#define ACPI_DO_WHILE0(a)               a
#endif

#define return_VOID                     ACPI_DO_WHILE0 ({ \
											acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
											return;})
/*
 * There are two versions of most of the return macros. The default version is
 * safer, since it avoids side-effects by guaranteeing that the argument will
 * not be evaluated twice.
 *
 * A less-safe version of the macros is provided for optional use if the
 * compiler uses excessive CPU stack (for example, this may happen in the
 * debug case if code optimzation is disabled.)
 */
#ifndef ACPI_SIMPLE_RETURN_MACROS

#define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
											register acpi_status _s = (s); \
											acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
											return (_s); })
#define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
											register void *_s = (void *) (s); \
											acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
											return (_s); })
#define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
											register u64 _s = (s); \
											acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
											return (_s); })
#define return_UINT8(s)                 ACPI_DO_WHILE0 ({ \
											register u8 _s = (u8) (s); \
											acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) _s); \
											return (_s); })
#define return_UINT32(s)                ACPI_DO_WHILE0 ({ \
											register u32 _s = (u32) (s); \
											acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) _s); \
											return (_s); })
#else				/* Use original less-safe macros */

#define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
											acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
											return((s)); })
#define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
											acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
											return((s)); })
#define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
											acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (u64) (s)); \
											return((s)); })
#define return_UINT8(s)                 return_VALUE(s)
#define return_UINT32(s)                return_VALUE(s)

#endif				/* ACPI_SIMPLE_RETURN_MACROS */

#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */

#define ACPI_FUNCTION_TRACE(a)
#define ACPI_FUNCTION_TRACE_PTR(a,b)
#define ACPI_FUNCTION_TRACE_U32(a,b)
#define ACPI_FUNCTION_TRACE_STR(a,b)
#define ACPI_FUNCTION_EXIT
#define ACPI_FUNCTION_STATUS_EXIT(s)
#define ACPI_FUNCTION_VALUE_EXIT(s)
#define ACPI_FUNCTION_TRACE(a)
#define ACPI_FUNCTION_ENTRY()

#define return_VOID                     return
#define return_ACPI_STATUS(s)           return(s)
#define return_VALUE(s)                 return(s)
#define return_UINT8(s)                 return(s)
#define return_UINT32(s)                return(s)
#define return_PTR(s)                   return(s)

#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */

/* Conditional execution */

#define ACPI_DEBUG_EXEC(a)              a
#define ACPI_NORMAL_EXEC(a)

#define ACPI_DEBUG_DEFINE(a)            a;
#define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
#define _VERBOSE_STRUCTURES

/* Stack and buffer dumping */

#define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a), 0)
#define ACPI_DUMP_OPERANDS(a, b, c)	acpi_ex_dump_operands(a, b, c)

#define ACPI_DUMP_ENTRY(a, b)           acpi_ns_dump_entry (a, b)
#define ACPI_DUMP_PATHNAME(a, b, c, d)  acpi_ns_dump_pathname(a, b, c, d)
#define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
#define ACPI_DUMP_BUFFER(a, b)          acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)

#else
/*
 * This is the non-debug case -- make everything go away,
 * leaving no executable debug code!
 */
#define ACPI_DEBUG_EXEC(a)
#define ACPI_NORMAL_EXEC(a)             a;

#define ACPI_DEBUG_DEFINE(a)		do { } while(0)
#define ACPI_DEBUG_ONLY_MEMBERS(a)	do { } while(0)
#define ACPI_FUNCTION_TRACE(a)		do { } while(0)
#define ACPI_FUNCTION_TRACE_PTR(a, b)	do { } while(0)
#define ACPI_FUNCTION_TRACE_U32(a, b)	do { } while(0)
#define ACPI_FUNCTION_TRACE_STR(a, b)	do { } while(0)
#define ACPI_FUNCTION_EXIT		do { } while(0)
#define ACPI_FUNCTION_STATUS_EXIT(s)	do { } while(0)
#define ACPI_FUNCTION_VALUE_EXIT(s)	do { } while(0)
#define ACPI_FUNCTION_ENTRY()		do { } while(0)
#define ACPI_DUMP_STACK_ENTRY(a)	do { } while(0)
#define ACPI_DUMP_OPERANDS(a, b, c)     do { } while(0)
#define ACPI_DUMP_ENTRY(a, b)		do { } while(0)
#define ACPI_DUMP_TABLES(a, b)		do { } while(0)
#define ACPI_DUMP_PATHNAME(a, b, c, d)	do { } while(0)
#define ACPI_DUMP_RESOURCE_LIST(a)	do { } while(0)
#define ACPI_DUMP_BUFFER(a, b)		do { } while(0)

#define return_VOID                     return
#define return_ACPI_STATUS(s)           return(s)
#define return_VALUE(s)                 return(s)
#define return_UINT8(s)                 return(s)
#define return_UINT32(s)                return(s)
#define return_PTR(s)                   return(s)

#endif				/* ACPI_DEBUG_OUTPUT */

#if (!ACPI_REDUCED_HARDWARE)
#define ACPI_HW_OPTIONAL_FUNCTION(addr)     addr
#else
#define ACPI_HW_OPTIONAL_FUNCTION(addr)     NULL
#endif

/*
 * Some code only gets executed when the debugger is built in.
 * Note that this is entirely independent of whether the
 * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
 */
#ifdef ACPI_DEBUGGER
#define ACPI_DEBUGGER_EXEC(a)           a
#else
#define ACPI_DEBUGGER_EXEC(a)
#endif

#ifdef ACPI_DEBUG_OUTPUT
/*
 * 1) Set name to blanks
 * 2) Copy the object name
 */
#define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
										ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
#else

#define ACPI_ADD_OBJECT_NAME(a,b)
#endif

/*
 * Memory allocation tracking (DEBUG ONLY)
 */
#define ACPI_MEM_PARAMETERS         _COMPONENT, _acpi_module_name, __LINE__

#ifndef ACPI_DBG_TRACK_ALLOCATIONS

/* Memory allocation */

#ifndef ACPI_ALLOCATE
#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS)
#endif
#ifndef ACPI_ALLOCATE_ZEROED
#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS)
#endif
#ifndef ACPI_FREE
#define ACPI_FREE(a)                acpio_os_free(a)
#endif
#define ACPI_MEM_TRACKING(a)

#else

/* Memory allocation */

#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
#define ACPI_FREE(a)                acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS)
#define ACPI_MEM_TRACKING(a)        a

#endif				/* ACPI_DBG_TRACK_ALLOCATIONS */

/* Preemption point */
#ifndef ACPI_PREEMPTION_POINT
#define ACPI_PREEMPTION_POINT() /* no preemption */
#endif

#endif				/* ACMACROS_H */