1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
|
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4210 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/notifier.h>
#include <linux/suspend.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-mem.h>
#include <mach/cpufreq.h>
#include <plat/clock.h>
#include <plat/pm.h>
#define CPUFREQ_LEVEL_END L5
static int max_support_idx = L0;
static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
static struct clk *cpu_clk;
static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
static struct regulator *arm_regulator;
static struct cpufreq_freqs freqs;
struct cpufreq_clkdiv {
unsigned int index;
unsigned int clkdiv;
};
static unsigned int exynos4210_volt_table[CPUFREQ_LEVEL_END] = {
1250000, 1150000, 1050000, 975000, 950000,
};
static struct cpufreq_clkdiv exynos4210_clkdiv_table[CPUFREQ_LEVEL_END];
static struct cpufreq_frequency_table exynos4210_freq_table[] = {
{L0, 1200*1000},
{L1, 1000*1000},
{L2, 800*1000},
{L3, 500*1000},
{L4, 200*1000},
{0, CPUFREQ_TABLE_END},
};
static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = {
/*
* Clock divider value for following
* { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
* DIVATB, DIVPCLK_DBG, DIVAPLL }
*/
/* ARM L0: 1200MHz */
{ 0, 3, 7, 3, 4, 1, 7 },
/* ARM L1: 1000MHz */
{ 0, 3, 7, 3, 4, 1, 7 },
/* ARM L2: 800MHz */
{ 0, 3, 7, 3, 3, 1, 7 },
/* ARM L3: 500MHz */
{ 0, 3, 7, 3, 3, 1, 7 },
/* ARM L4: 200MHz */
{ 0, 1, 3, 1, 3, 1, 0 },
};
static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
/*
* Clock divider value for following
* { DIVCOPY, DIVHPM }
*/
/* ARM L0: 1200MHz */
{ 5, 0 },
/* ARM L1: 1000MHz */
{ 4, 0 },
/* ARM L2: 800MHz */
{ 3, 0 },
/* ARM L3: 500MHz */
{ 3, 0 },
/* ARM L4: 200MHz */
{ 3, 0 },
};
static unsigned int exynos4210_apll_pms_table[CPUFREQ_LEVEL_END] = {
/* APLL FOUT L0: 1200MHz */
((150 << 16) | (3 << 8) | 1),
/* APLL FOUT L1: 1000MHz */
((250 << 16) | (6 << 8) | 1),
/* APLL FOUT L2: 800MHz */
((200 << 16) | (6 << 8) | 1),
/* APLL FOUT L3: 500MHz */
((250 << 16) | (6 << 8) | 2),
/* APLL FOUT L4: 200MHz */
((200 << 16) | (6 << 8) | 3),
};
static void exynos4210_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
/* Change Divider - CPU0 */
tmp = exynos4210_clkdiv_table[div_index].clkdiv;
__raw_writel(tmp, S5P_CLKDIV_CPU);
do {
tmp = __raw_readl(S5P_CLKDIV_STATCPU);
} while (tmp & 0x1111111);
/* Change Divider - CPU1 */
tmp = __raw_readl(S5P_CLKDIV_CPU1);
tmp &= ~((0x7 << 4) | 0x7);
tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
(clkdiv_cpu1[div_index][1] << 0));
__raw_writel(tmp, S5P_CLKDIV_CPU1);
do {
tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
} while (tmp & 0x11);
}
static void exynos4210_set_apll(unsigned int index)
{
unsigned int tmp;
/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
clk_set_parent(moutcore, mout_mpll);
do {
tmp = (__raw_readl(S5P_CLKMUX_STATCPU)
>> S5P_CLKSRC_CPU_MUXCORE_SHIFT);
tmp &= 0x7;
} while (tmp != 0x2);
/* 2. Set APLL Lock time */
__raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK);
/* 3. Change PLL PMS values */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
tmp |= exynos4210_apll_pms_table[index];
__raw_writel(tmp, S5P_APLL_CON0);
/* 4. wait_lock_time */
do {
tmp = __raw_readl(S5P_APLL_CON0);
} while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT)));
/* 5. MUX_CORE_SEL = APLL */
clk_set_parent(moutcore, mout_apll);
do {
tmp = __raw_readl(S5P_CLKMUX_STATCPU);
tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK;
} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
}
bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
{
unsigned int old_pm = (exynos4210_apll_pms_table[old_index] >> 8);
unsigned int new_pm = (exynos4210_apll_pms_table[new_index] >> 8);
return (old_pm == new_pm) ? 0 : 1;
}
static void exynos4210_set_frequency(unsigned int old_index,
unsigned int new_index)
{
unsigned int tmp;
if (old_index > new_index) {
if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change the system clock divider values */
exynos4210_set_clkdiv(new_index);
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
} else {
/* Clock Configuration Procedure */
/* 1. Change the system clock divider values */
exynos4210_set_clkdiv(new_index);
/* 2. Change the apll m,p,s value */
exynos4210_set_apll(new_index);
}
} else if (old_index < new_index) {
if (!exynos4210_pms_change(old_index, new_index)) {
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
/* 2. Change the system clock divider values */
exynos4210_set_clkdiv(new_index);
} else {
/* Clock Configuration Procedure */
/* 1. Change the apll m,p,s value */
exynos4210_set_apll(new_index);
/* 2. Change the system clock divider values */
exynos4210_set_clkdiv(new_index);
}
}
}
int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
{
int i;
unsigned int tmp;
unsigned long rate;
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
goto err_moutcore;
mout_mpll = clk_get(NULL, "mout_mpll");
if (IS_ERR(mout_mpll))
goto err_mout_mpll;
rate = clk_get_rate(mout_mpll) / 1000;
mout_apll = clk_get(NULL, "mout_apll");
if (IS_ERR(mout_apll))
goto err_mout_apll;
tmp = __raw_readl(S5P_CLKDIV_CPU);
for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK |
S5P_CLKDIV_CPU0_COREM0_MASK |
S5P_CLKDIV_CPU0_COREM1_MASK |
S5P_CLKDIV_CPU0_PERIPH_MASK |
S5P_CLKDIV_CPU0_ATB_MASK |
S5P_CLKDIV_CPU0_PCLKDBG_MASK |
S5P_CLKDIV_CPU0_APLL_MASK);
tmp |= ((clkdiv_cpu0[i][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
(clkdiv_cpu0[i][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
(clkdiv_cpu0[i][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
(clkdiv_cpu0[i][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
(clkdiv_cpu0[i][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
(clkdiv_cpu0[i][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
(clkdiv_cpu0[i][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
exynos4210_clkdiv_table[i].clkdiv = tmp;
}
info->mpll_freq_khz = rate;
info->pm_lock_idx = L2;
info->pll_safe_idx = L2;
info->max_support_idx = max_support_idx;
info->min_support_idx = min_support_idx;
info->cpu_clk = cpu_clk;
info->volt_table = exynos4210_volt_table;
info->freq_table = exynos4210_freq_table;
info->set_freq = exynos4210_set_frequency;
info->need_apll_change = exynos4210_pms_change;
return 0;
err_mout_apll:
if (!IS_ERR(mout_mpll))
clk_put(mout_mpll);
err_mout_mpll:
if (!IS_ERR(moutcore))
clk_put(moutcore);
err_moutcore:
if (!IS_ERR(cpu_clk))
clk_put(cpu_clk);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
EXPORT_SYMBOL(exynos4210_cpufreq_init);
|
