summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/hpt366.c
blob: 7b589d948bf98bce6405196a55444787d4eff920 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
/*
 * linux/drivers/ide/pci/hpt366.c		Version 0.36	April 25, 2003
 *
 * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
 * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
 * Portions Copyright (C) 2003		Red Hat Inc
 *
 * Thanks to HighPoint Technologies for their assistance, and hardware.
 * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
 * donation of an ABit BP6 mainboard, processor, and memory acellerated
 * development and support.
 *
 *
 * Highpoint have their own driver (source except for the raid part)
 * available from http://www.highpoint-tech.com/hpt3xx-opensource-v131.tgz
 * This may be useful to anyone wanting to work on the mainstream hpt IDE.
 *
 * Note that final HPT370 support was done by force extraction of GPL.
 *
 * - add function for getting/setting power status of drive
 * - the HPT370's state machine can get confused. reset it before each dma 
 *   xfer to prevent that from happening.
 * - reset state engine whenever we get an error.
 * - check for busmaster state at end of dma. 
 * - use new highpoint timings.
 * - detect bus speed using highpoint register.
 * - use pll if we don't have a clock table. added a 66MHz table that's
 *   just 2x the 33MHz table.
 * - removed turnaround. NOTE: we never want to switch between pll and
 *   pci clocks as the chip can glitch in those cases. the highpoint
 *   approved workaround slows everything down too much to be useful. in
 *   addition, we would have to serialize access to each chip.
 * 	Adrian Sun <a.sun@sun.com>
 *
 * add drive timings for 66MHz PCI bus,
 * fix ATA Cable signal detection, fix incorrect /proc info
 * add /proc display for per-drive PIO/DMA/UDMA mode and
 * per-channel ATA-33/66 Cable detect.
 * 	Duncan Laurie <void@sun.com>
 *
 * fixup /proc output for multiple controllers
 *	Tim Hockin <thockin@sun.com>
 *
 * On hpt366: 
 * Reset the hpt366 on error, reset on dma
 * Fix disabling Fast Interrupt hpt366.
 * 	Mike Waychison <crlf@sun.com>
 *
 * Added support for 372N clocking and clock switching. The 372N needs
 * different clocks on read/write. This requires overloading rw_disk and
 * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
 * keeping me sane. 
 *		Alan Cox <alan@redhat.com>
 *
 */


#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>

#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>

#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/irq.h>

/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
#undef HPT_SERIALIZE_IO

static const char *quirk_drives[] = {
	"QUANTUM FIREBALLlct08 08",
	"QUANTUM FIREBALLP KA6.4",
	"QUANTUM FIREBALLP LM20.4",
	"QUANTUM FIREBALLP LM20.5",
	NULL
};

static const char *bad_ata100_5[] = {
	"IBM-DTLA-307075",
	"IBM-DTLA-307060",
	"IBM-DTLA-307045",
	"IBM-DTLA-307030",
	"IBM-DTLA-307020",
	"IBM-DTLA-307015",
	"IBM-DTLA-305040",
	"IBM-DTLA-305030",
	"IBM-DTLA-305020",
	"IC35L010AVER07-0",
	"IC35L020AVER07-0",
	"IC35L030AVER07-0",
	"IC35L040AVER07-0",
	"IC35L060AVER07-0",
	"WDC AC310200R",
	NULL
};

static const char *bad_ata66_4[] = {
	"IBM-DTLA-307075",
	"IBM-DTLA-307060",
	"IBM-DTLA-307045",
	"IBM-DTLA-307030",
	"IBM-DTLA-307020",
	"IBM-DTLA-307015",
	"IBM-DTLA-305040",
	"IBM-DTLA-305030",
	"IBM-DTLA-305020",
	"IC35L010AVER07-0",
	"IC35L020AVER07-0",
	"IC35L030AVER07-0",
	"IC35L040AVER07-0",
	"IC35L060AVER07-0",
	"WDC AC310200R",
	NULL
};

static const char *bad_ata66_3[] = {
	"WDC AC310200R",
	NULL
};

static const char *bad_ata33[] = {
	"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
	"Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
	"Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
	"Maxtor 90510D4",
	"Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
	"Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
	"Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
	NULL
};

struct chipset_bus_clock_list_entry {
	u8		xfer_speed;
	unsigned int	chipset_settings;
};

/* key for bus clock timings
 * bit
 * 0:3    data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
 *        DMA. cycles = value + 1
 * 4:8    data_low_time. active time of DIOW_/DIOR_ for PIO and MW
 *        DMA. cycles = value + 1
 * 9:12   cmd_high_time. inactive time of DIOW_/DIOR_ during task file
 *        register access.
 * 13:17  cmd_low_time. active time of DIOW_/DIOR_ during task file
 *        register access.
 * 18:21  udma_cycle_time. clock freq and clock cycles for UDMA xfer.
 *        during task file register access.
 * 22:24  pre_high_time. time to initialize 1st cycle for PIO and MW DMA
 *        xfer.
 * 25:27  cmd_pre_high_time. time to initialize 1st PIO cycle for task
 *        register access.
 * 28     UDMA enable
 * 29     DMA enable
 * 30     PIO_MST enable. if set, the chip is in bus master mode during
 *        PIO.
 * 31     FIFO enable.
 */
static struct chipset_bus_clock_list_entry forty_base_hpt366[] = {
	{	XFER_UDMA_4,	0x900fd943	},
	{	XFER_UDMA_3,	0x900ad943	},
	{	XFER_UDMA_2,	0x900bd943	},
	{	XFER_UDMA_1,	0x9008d943	},
	{	XFER_UDMA_0,	0x9008d943	},

	{	XFER_MW_DMA_2,	0xa008d943	},
	{	XFER_MW_DMA_1,	0xa010d955	},
	{	XFER_MW_DMA_0,	0xa010d9fc	},

	{	XFER_PIO_4,	0xc008d963	},
	{	XFER_PIO_3,	0xc010d974	},
	{	XFER_PIO_2,	0xc010d997	},
	{	XFER_PIO_1,	0xc010d9c7	},
	{	XFER_PIO_0,	0xc018d9d9	},
	{	0,		0x0120d9d9	}
};

static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = {
	{	XFER_UDMA_4,	0x90c9a731	},
	{	XFER_UDMA_3,	0x90cfa731	},
	{	XFER_UDMA_2,	0x90caa731	},
	{	XFER_UDMA_1,	0x90cba731	},
	{	XFER_UDMA_0,	0x90c8a731	},

	{	XFER_MW_DMA_2,	0xa0c8a731	},
	{	XFER_MW_DMA_1,	0xa0c8a732	},	/* 0xa0c8a733 */
	{	XFER_MW_DMA_0,	0xa0c8a797	},

	{	XFER_PIO_4,	0xc0c8a731	},
	{	XFER_PIO_3,	0xc0c8a742	},
	{	XFER_PIO_2,	0xc0d0a753	},
	{	XFER_PIO_1,	0xc0d0a7a3	},	/* 0xc0d0a793 */
	{	XFER_PIO_0,	0xc0d0a7aa	},	/* 0xc0d0a7a7 */
	{	0,		0x0120a7a7	}
};

static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = {
	{	XFER_UDMA_4,	0x90c98521	},
	{	XFER_UDMA_3,	0x90cf8521	},
	{	XFER_UDMA_2,	0x90cf8521	},
	{	XFER_UDMA_1,	0x90cb8521	},
	{	XFER_UDMA_0,	0x90cb8521	},

	{	XFER_MW_DMA_2,	0xa0ca8521	},
	{	XFER_MW_DMA_1,	0xa0ca8532	},
	{	XFER_MW_DMA_0,	0xa0ca8575	},

	{	XFER_PIO_4,	0xc0ca8521	},
	{	XFER_PIO_3,	0xc0ca8532	},
	{	XFER_PIO_2,	0xc0ca8542	},
	{	XFER_PIO_1,	0xc0d08572	},
	{	XFER_PIO_0,	0xc0d08585	},
	{	0,		0x01208585	}
};

/* from highpoint documentation. these are old values */
static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = {
/*	{	XFER_UDMA_5,	0x1A85F442,	0x16454e31	}, */
	{	XFER_UDMA_5,	0x16454e31	},
	{	XFER_UDMA_4,	0x16454e31	},
	{	XFER_UDMA_3,	0x166d4e31	},
	{	XFER_UDMA_2,	0x16494e31	},
	{	XFER_UDMA_1,	0x164d4e31	},
	{	XFER_UDMA_0,	0x16514e31	},

	{	XFER_MW_DMA_2,	0x26514e21	},
	{	XFER_MW_DMA_1,	0x26514e33	},
	{	XFER_MW_DMA_0,	0x26514e97	},

	{	XFER_PIO_4,	0x06514e21	},
	{	XFER_PIO_3,	0x06514e22	},
	{	XFER_PIO_2,	0x06514e33	},
	{	XFER_PIO_1,	0x06914e43	},
	{	XFER_PIO_0,	0x06914e57	},
	{	0,		0x06514e57	}
};

static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = {
	{	XFER_UDMA_5,	0x14846231	},
	{	XFER_UDMA_4,	0x14886231	},
	{	XFER_UDMA_3,	0x148c6231	},
	{	XFER_UDMA_2,	0x148c6231	},
	{	XFER_UDMA_1,	0x14906231	},
	{	XFER_UDMA_0,	0x14986231	},

	{	XFER_MW_DMA_2,	0x26514e21	},
	{	XFER_MW_DMA_1,	0x26514e33	},
	{	XFER_MW_DMA_0,	0x26514e97	},

	{	XFER_PIO_4,	0x06514e21	},
	{	XFER_PIO_3,	0x06514e22	},
	{	XFER_PIO_2,	0x06514e33	},
	{	XFER_PIO_1,	0x06914e43	},
	{	XFER_PIO_0,	0x06914e57	},
	{	0,		0x06514e57	}
};

/* these are the current (4 sep 2001) timings from highpoint */
static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = {
	{	XFER_UDMA_5,	0x12446231	},
	{	XFER_UDMA_4,	0x12446231	},
	{	XFER_UDMA_3,	0x126c6231	},
	{	XFER_UDMA_2,	0x12486231	},
	{	XFER_UDMA_1,	0x124c6233	},
	{	XFER_UDMA_0,	0x12506297	},

	{	XFER_MW_DMA_2,	0x22406c31	},
	{	XFER_MW_DMA_1,	0x22406c33	},
	{	XFER_MW_DMA_0,	0x22406c97	},

	{	XFER_PIO_4,	0x06414e31	},
	{	XFER_PIO_3,	0x06414e42	},
	{	XFER_PIO_2,	0x06414e53	},
	{	XFER_PIO_1,	0x06814e93	},
	{	XFER_PIO_0,	0x06814ea7	},
	{	0,		0x06814ea7	}
};

/* 2x 33MHz timings */
static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = {
	{	XFER_UDMA_5,	0x1488e673	},
	{	XFER_UDMA_4,	0x1488e673	},
	{	XFER_UDMA_3,	0x1498e673	},
	{	XFER_UDMA_2,	0x1490e673	},
	{	XFER_UDMA_1,	0x1498e677	},
	{	XFER_UDMA_0,	0x14a0e73f	},

	{	XFER_MW_DMA_2,	0x2480fa73	},
	{	XFER_MW_DMA_1,	0x2480fa77	}, 
	{	XFER_MW_DMA_0,	0x2480fb3f	},

	{	XFER_PIO_4,	0x0c82be73	},
	{	XFER_PIO_3,	0x0c82be95	},
	{	XFER_PIO_2,	0x0c82beb7	},
	{	XFER_PIO_1,	0x0d02bf37	},
	{	XFER_PIO_0,	0x0d02bf5f	},
	{	0,		0x0d02bf5f	}
};

static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = {
	{	XFER_UDMA_5,	0x12848242	},
	{	XFER_UDMA_4,	0x12ac8242	},
	{	XFER_UDMA_3,	0x128c8242	},
	{	XFER_UDMA_2,	0x120c8242	},
	{	XFER_UDMA_1,	0x12148254	},
	{	XFER_UDMA_0,	0x121882ea	},

	{	XFER_MW_DMA_2,	0x22808242	},
	{	XFER_MW_DMA_1,	0x22808254	},
	{	XFER_MW_DMA_0,	0x228082ea	},

	{	XFER_PIO_4,	0x0a81f442	},
	{	XFER_PIO_3,	0x0a81f443	},
	{	XFER_PIO_2,	0x0a81f454	},
	{	XFER_PIO_1,	0x0ac1f465	},
	{	XFER_PIO_0,	0x0ac1f48a	},
	{	0,		0x0ac1f48a	}
};

static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = {
	{	XFER_UDMA_6,	0x1c81dc62	},
	{	XFER_UDMA_5,	0x1c6ddc62	},
	{	XFER_UDMA_4,	0x1c8ddc62	},
	{	XFER_UDMA_3,	0x1c8edc62	},	/* checkme */
	{	XFER_UDMA_2,	0x1c91dc62	},
	{	XFER_UDMA_1,	0x1c9adc62	},	/* checkme */
	{	XFER_UDMA_0,	0x1c82dc62	},	/* checkme */

	{	XFER_MW_DMA_2,	0x2c829262	},
	{	XFER_MW_DMA_1,	0x2c829266	},	/* checkme */
	{	XFER_MW_DMA_0,	0x2c82922e	},	/* checkme */

	{	XFER_PIO_4,	0x0c829c62	},
	{	XFER_PIO_3,	0x0c829c84	},
	{	XFER_PIO_2,	0x0c829ca6	},
	{	XFER_PIO_1,	0x0d029d26	},
	{	XFER_PIO_0,	0x0d029d5e	},
	{	0,		0x0d029d5e	}
};

static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = {
	{	XFER_UDMA_5,	0x12848242	},
	{	XFER_UDMA_4,	0x12ac8242	},
	{	XFER_UDMA_3,	0x128c8242	},
	{	XFER_UDMA_2,	0x120c8242	},
	{	XFER_UDMA_1,	0x12148254	},
	{	XFER_UDMA_0,	0x121882ea	},

	{	XFER_MW_DMA_2,	0x22808242	},
	{	XFER_MW_DMA_1,	0x22808254	},
	{	XFER_MW_DMA_0,	0x228082ea	},

	{	XFER_PIO_4,	0x0a81f442	},
	{	XFER_PIO_3,	0x0a81f443	},
	{	XFER_PIO_2,	0x0a81f454	},
	{	XFER_PIO_1,	0x0ac1f465	},
	{	XFER_PIO_0,	0x0ac1f48a	},
	{	0,		0x0a81f443	}
};

static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = {
	{	XFER_UDMA_6,	0x1c869c62	},
	{	XFER_UDMA_5,	0x1cae9c62	},
	{	XFER_UDMA_4,	0x1c8a9c62	},
	{	XFER_UDMA_3,	0x1c8e9c62	},
	{	XFER_UDMA_2,	0x1c929c62	},
	{	XFER_UDMA_1,	0x1c9a9c62	},
	{	XFER_UDMA_0,	0x1c829c62	},

	{	XFER_MW_DMA_2,	0x2c829c62	},
	{	XFER_MW_DMA_1,	0x2c829c66	},
	{	XFER_MW_DMA_0,	0x2c829d2e	},

	{	XFER_PIO_4,	0x0c829c62	},
	{	XFER_PIO_3,	0x0c829c84	},
	{	XFER_PIO_2,	0x0c829ca6	},
	{	XFER_PIO_1,	0x0d029d26	},
	{	XFER_PIO_0,	0x0d029d5e	},
	{	0,		0x0d029d26	}
};

static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = {
	{	XFER_UDMA_6,	0x12808242	},
	{	XFER_UDMA_5,	0x12848242	},
	{	XFER_UDMA_4,	0x12ac8242	},
	{	XFER_UDMA_3,	0x128c8242	},
	{	XFER_UDMA_2,	0x120c8242	},
	{	XFER_UDMA_1,	0x12148254	},
	{	XFER_UDMA_0,	0x121882ea	},

	{	XFER_MW_DMA_2,	0x22808242	},
	{	XFER_MW_DMA_1,	0x22808254	},
	{	XFER_MW_DMA_0,	0x228082ea	},

	{	XFER_PIO_4,	0x0a81f442	},
	{	XFER_PIO_3,	0x0a81f443	},
	{	XFER_PIO_2,	0x0a81f454	},
	{	XFER_PIO_1,	0x0ac1f465	},
	{	XFER_PIO_0,	0x0ac1f48a	},
	{	0,		0x06814e93	}
};

/* FIXME: 50MHz timings for HPT374 */

#if 0
static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = {
	{	XFER_UDMA_6,	0x12406231	},	/* checkme */
	{	XFER_UDMA_5,	0x12446231	},	/* 0x14846231 */
	{	XFER_UDMA_4,	0x16814ea7	},	/* 0x14886231 */
	{	XFER_UDMA_3,	0x16814ea7	},	/* 0x148c6231 */
	{	XFER_UDMA_2,	0x16814ea7	},	/* 0x148c6231 */
	{	XFER_UDMA_1,	0x16814ea7	},	/* 0x14906231 */
	{	XFER_UDMA_0,	0x16814ea7	},	/* 0x14986231 */
	{	XFER_MW_DMA_2,	0x16814ea7	},	/* 0x26514e21 */
	{	XFER_MW_DMA_1,	0x16814ea7	},	/* 0x26514e97 */
	{	XFER_MW_DMA_0,	0x16814ea7	},	/* 0x26514e97 */
	{	XFER_PIO_4,	0x06814ea7	},	/* 0x06514e21 */
	{	XFER_PIO_3,	0x06814ea7	},	/* 0x06514e22 */
	{	XFER_PIO_2,	0x06814ea7	},	/* 0x06514e33 */
	{	XFER_PIO_1,	0x06814ea7	},	/* 0x06914e43 */
	{	XFER_PIO_0,	0x06814ea7	},	/* 0x06914e57 */
	{	0,		0x06814ea7	}
};
#endif

#define HPT366_DEBUG_DRIVE_INFO		0
#define HPT374_ALLOW_ATA133_6		0
#define HPT371_ALLOW_ATA133_6		0
#define HPT302_ALLOW_ATA133_6		0
#define HPT372_ALLOW_ATA133_6		1
#define HPT370_ALLOW_ATA100_5		1
#define HPT366_ALLOW_ATA66_4		1
#define HPT366_ALLOW_ATA66_3		1
#define HPT366_MAX_DEVS			8

#define F_LOW_PCI_33	0x23
#define F_LOW_PCI_40	0x29
#define F_LOW_PCI_50	0x2d
#define F_LOW_PCI_66	0x42

/*
 *	Hold all the highpoint quirks and revision information in one
 *	place.
 */

struct hpt_info
{
	u8 max_mode;		/* Speeds allowed */
	int revision;		/* Chipset revision */
	int flags;		/* Chipset properties */
#define PLL_MODE	1
#define IS_372N		2
				/* Speed table */
	struct chipset_bus_clock_list_entry *speed;
};

/*
 *	This wants fixing so that we do everything not by classrev
 *	(which breaks on the newest chips) but by creating an
 *	enumeration of chip variants and using that
 */

static __devinit u32 hpt_revision (struct pci_dev *dev)
{
	u32 class_rev;
	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
	class_rev &= 0xff;

	switch(dev->device) {
		/* Remap new 372N onto 372 */
		case PCI_DEVICE_ID_TTI_HPT372N:
			class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
		case PCI_DEVICE_ID_TTI_HPT374:
			class_rev = PCI_DEVICE_ID_TTI_HPT374; break;
		case PCI_DEVICE_ID_TTI_HPT371:
			class_rev = PCI_DEVICE_ID_TTI_HPT371; break;
		case PCI_DEVICE_ID_TTI_HPT302:
			class_rev = PCI_DEVICE_ID_TTI_HPT302; break;
		case PCI_DEVICE_ID_TTI_HPT372:
			class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
		default:
			break;
	}
	return class_rev;
}

static int check_in_drive_lists(ide_drive_t *drive, const char **list);

static u8 hpt3xx_ratemask (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct hpt_info *info	= ide_get_hwifdata(hwif);
	u8 mode			= 0;

	/* FIXME: TODO - move this to set info->mode once at boot */

	if (info->revision >= 8) {		/* HPT374 */
		mode = (HPT374_ALLOW_ATA133_6) ? 4 : 3;
	} else if (info->revision >= 7) {	/* HPT371 */
		mode = (HPT371_ALLOW_ATA133_6) ? 4 : 3;
	} else if (info->revision >= 6) {	/* HPT302 */
		mode = (HPT302_ALLOW_ATA133_6) ? 4 : 3;
	} else if (info->revision >= 5) {	/* HPT372 */
		mode = (HPT372_ALLOW_ATA133_6) ? 4 : 3;
	} else if (info->revision >= 4) {	/* HPT370A */
		mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2;
	} else if (info->revision >= 3) {	/* HPT370 */
		mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2;
		mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : mode;
	} else {				/* HPT366 and HPT368 */
		mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : 2;
	}
	if (!eighty_ninty_three(drive) && mode)
		mode = min(mode, (u8)1);
	return mode;
}

/*
 *	Note for the future; the SATA hpt37x we must set
 *	either PIO or UDMA modes 0,4,5
 */
 
static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct hpt_info *info	= ide_get_hwifdata(hwif);
	u8 mode			= hpt3xx_ratemask(drive);

	if (drive->media != ide_disk)
		return min(speed, (u8)XFER_PIO_4);

	switch(mode) {
		case 0x04:
			speed = min(speed, (u8)XFER_UDMA_6);
			break;
		case 0x03:
			speed = min(speed, (u8)XFER_UDMA_5);
			if (info->revision >= 5)
				break;
			if (check_in_drive_lists(drive, bad_ata100_5))
				speed = min(speed, (u8)XFER_UDMA_4);
			break;
		case 0x02:
			speed = min(speed, (u8)XFER_UDMA_4);
	/*
	 * CHECK ME, Does this need to be set to 5 ??
	 */
			if (info->revision >= 3)
				break;
			if ((check_in_drive_lists(drive, bad_ata66_4)) ||
			    (!(HPT366_ALLOW_ATA66_4)))
				speed = min(speed, (u8)XFER_UDMA_3);
			if ((check_in_drive_lists(drive, bad_ata66_3)) ||
			    (!(HPT366_ALLOW_ATA66_3)))
				speed = min(speed, (u8)XFER_UDMA_2);
			break;
		case 0x01:
			speed = min(speed, (u8)XFER_UDMA_2);
	/*
	 * CHECK ME, Does this need to be set to 5 ??
	 */
			if (info->revision >= 3)
				break;
			if (check_in_drive_lists(drive, bad_ata33))
				speed = min(speed, (u8)XFER_MW_DMA_2);
			break;
		case 0x00:
		default:
			speed = min(speed, (u8)XFER_MW_DMA_2);
			break;
	}
	return speed;
}

static int check_in_drive_lists (ide_drive_t *drive, const char **list)
{
	struct hd_driveid *id = drive->id;

	if (quirk_drives == list) {
		while (*list)
			if (strstr(id->model, *list++))
				return 1;
	} else {
		while (*list)
			if (!strcmp(*list++,id->model))
				return 1;
	}
	return 0;
}

static unsigned int pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
{
	for ( ; chipset_table->xfer_speed ; chipset_table++)
		if (chipset_table->xfer_speed == speed)
			return chipset_table->chipset_settings;
	return chipset_table->chipset_settings;
}

static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct pci_dev *dev	= hwif->pci_dev;
	struct hpt_info	*info	= ide_get_hwifdata(hwif);
	u8 speed		= hpt3xx_ratefilter(drive, xferspeed);
	u8 regtime		= (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
	u8 regfast		= (hwif->channel) ? 0x55 : 0x51;
	u8 drive_fast		= 0;
	u32 reg1 = 0, reg2	= 0;

	/*
	 * Disable the "fast interrupt" prediction.
	 */
	pci_read_config_byte(dev, regfast, &drive_fast);
	if (drive_fast & 0x80)
		pci_write_config_byte(dev, regfast, drive_fast & ~0x80);

	reg2 = pci_bus_clock_list(speed, info->speed);

	/*
	 * Disable on-chip PIO FIFO/buffer
	 *  (to avoid problems handling I/O errors later)
	 */
	pci_read_config_dword(dev, regtime, &reg1);
	if (speed >= XFER_MW_DMA_0) {
		reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000);
	} else {
		reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000);
	}	
	reg2 &= ~0x80000000;

	pci_write_config_dword(dev, regtime, reg2);

	return ide_config_drive_speed(drive, speed);
}

static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct pci_dev *dev = hwif->pci_dev;
	struct hpt_info	*info	= ide_get_hwifdata(hwif);
	u8 speed	= hpt3xx_ratefilter(drive, xferspeed);
	u8 regfast	= (drive->hwif->channel) ? 0x55 : 0x51;
	u8 drive_pci	= 0x40 + (drive->dn * 4);
	u8 new_fast	= 0, drive_fast = 0;
	u32 list_conf	= 0, drive_conf = 0;
	u32 conf_mask	= (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;

	/*
	 * Disable the "fast interrupt" prediction.
	 * don't holdoff on interrupts. (== 0x01 despite what the docs say) 
	 */
	pci_read_config_byte(dev, regfast, &drive_fast);
	new_fast = drive_fast;
	if (new_fast & 0x02)
		new_fast &= ~0x02;

#ifdef HPT_DELAY_INTERRUPT
	if (new_fast & 0x01)
		new_fast &= ~0x01;
#else
	if ((new_fast & 0x01) == 0)
		new_fast |= 0x01;
#endif
	if (new_fast != drive_fast)
		pci_write_config_byte(dev, regfast, new_fast);

	list_conf = pci_bus_clock_list(speed, info->speed);

	pci_read_config_dword(dev, drive_pci, &drive_conf);
	list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
	
	if (speed < XFER_MW_DMA_0)
		list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
	pci_write_config_dword(dev, drive_pci, list_conf);

	return ide_config_drive_speed(drive, speed);
}

static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct pci_dev *dev	= hwif->pci_dev;
	struct hpt_info	*info	= ide_get_hwifdata(hwif);
	u8 speed	= hpt3xx_ratefilter(drive, xferspeed);
	u8 regfast	= (drive->hwif->channel) ? 0x55 : 0x51;
	u8 drive_fast	= 0, drive_pci = 0x40 + (drive->dn * 4);
	u32 list_conf	= 0, drive_conf = 0;
	u32 conf_mask	= (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;

	/*
	 * Disable the "fast interrupt" prediction.
	 * don't holdoff on interrupts. (== 0x01 despite what the docs say)
	 */
	pci_read_config_byte(dev, regfast, &drive_fast);
	drive_fast &= ~0x07;
	pci_write_config_byte(dev, regfast, drive_fast);

	list_conf = pci_bus_clock_list(speed, info->speed);
	pci_read_config_dword(dev, drive_pci, &drive_conf);
	list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
	if (speed < XFER_MW_DMA_0)
		list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
	pci_write_config_dword(dev, drive_pci, list_conf);

	return ide_config_drive_speed(drive, speed);
}

static int hpt3xx_tune_chipset (ide_drive_t *drive, u8 speed)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct hpt_info	*info	= ide_get_hwifdata(hwif);

	if (info->revision >= 8)
		return hpt372_tune_chipset(drive, speed); /* not a typo */
	else if (info->revision >= 5)
		return hpt372_tune_chipset(drive, speed);
	else if (info->revision >= 3)
		return hpt370_tune_chipset(drive, speed);
	else	/* hpt368: hpt_minimum_revision(dev, 2) */
		return hpt36x_tune_chipset(drive, speed);
}

static void hpt3xx_tune_drive (ide_drive_t *drive, u8 pio)
{
	pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
	(void) hpt3xx_tune_chipset(drive, (XFER_PIO_0 + pio));
}

/*
 * This allows the configuration of ide_pci chipset registers
 * for cards that learn about the drive's UDMA, DMA, PIO capabilities
 * after the drive is reported by the OS.  Initially for designed for
 * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc.
 *
 * check_in_drive_lists(drive, bad_ata66_4)
 * check_in_drive_lists(drive, bad_ata66_3)
 * check_in_drive_lists(drive, bad_ata33)
 *
 */
static int config_chipset_for_dma (ide_drive_t *drive)
{
	u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive));
	ide_hwif_t *hwif = drive->hwif;
	struct hpt_info	*info	= ide_get_hwifdata(hwif);

	if (!speed)
		return 0;

	/* If we don't have any timings we can't do a lot */
	if (info->speed == NULL)
		return 0;

	(void) hpt3xx_tune_chipset(drive, speed);
	return ide_dma_enable(drive);
}

static int hpt3xx_quirkproc (ide_drive_t *drive)
{
	return ((int) check_in_drive_lists(drive, quirk_drives));
}

static void hpt3xx_intrproc (ide_drive_t *drive)
{
	ide_hwif_t *hwif = drive->hwif;

	if (drive->quirk_list)
		return;
	/* drives in the quirk_list may not like intr setups/cleanups */
	hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
}

static void hpt3xx_maskproc (ide_drive_t *drive, int mask)
{
	ide_hwif_t *hwif = drive->hwif;
	struct hpt_info *info = ide_get_hwifdata(hwif);
	struct pci_dev *dev = hwif->pci_dev;

	if (drive->quirk_list) {
		if (info->revision >= 3) {
			u8 reg5a = 0;
			pci_read_config_byte(dev, 0x5a, &reg5a);
			if (((reg5a & 0x10) >> 4) != mask)
				pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
		} else {
			if (mask) {
				disable_irq(hwif->irq);
			} else {
				enable_irq(hwif->irq);
			}
		}
	} else {
		if (IDE_CONTROL_REG)
			hwif->OUTB(mask ? (drive->ctl | 2) :
						 (drive->ctl & ~2),
						 IDE_CONTROL_REG);
	}
}

static int hpt366_config_drive_xfer_rate (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct hd_driveid *id	= drive->id;

	drive->init_speed = 0;

	if ((id->capability & 1) && drive->autodma) {

		if (ide_use_dma(drive)) {
			if (config_chipset_for_dma(drive))
				return hwif->ide_dma_on(drive);
		}

		goto fast_ata_pio;

	} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
		hpt3xx_tune_drive(drive, 5);
		return hwif->ide_dma_off_quietly(drive);
	}
	/* IORDY not supported */
	return 0;
}

/*
 * This is specific to the HPT366 UDMA bios chipset
 * by HighPoint|Triones Technologies, Inc.
 */
static int hpt366_ide_dma_lostirq (ide_drive_t *drive)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	u8 reg50h = 0, reg52h = 0, reg5ah = 0;

	pci_read_config_byte(dev, 0x50, &reg50h);
	pci_read_config_byte(dev, 0x52, &reg52h);
	pci_read_config_byte(dev, 0x5a, &reg5ah);
	printk("%s: (%s)  reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
		drive->name, __FUNCTION__, reg50h, reg52h, reg5ah);
	if (reg5ah & 0x10)
		pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
	return __ide_dma_lostirq(drive);
}

static void hpt370_clear_engine (ide_drive_t *drive)
{
	u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50;
	pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37);
	udelay(10);
}

static void hpt370_ide_dma_start(ide_drive_t *drive)
{
#ifdef HPT_RESET_STATE_ENGINE
	hpt370_clear_engine(drive);
#endif
	ide_dma_start(drive);
}

static int hpt370_ide_dma_end (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	u8 dma_stat		= hwif->INB(hwif->dma_status);

	if (dma_stat & 0x01) {
		/* wait a little */
		udelay(20);
		dma_stat = hwif->INB(hwif->dma_status);
	}
	if ((dma_stat & 0x01) != 0) 
		/* fallthrough */
		(void) HWIF(drive)->ide_dma_timeout(drive);

	return __ide_dma_end(drive);
}

static void hpt370_lostirq_timeout (ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	u8 bfifo = 0, reginfo	= hwif->channel ? 0x56 : 0x52;
	u8 dma_stat = 0, dma_cmd = 0;

	pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo);
	printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo);
	hpt370_clear_engine(drive);
	/* get dma command mode */
	dma_cmd = hwif->INB(hwif->dma_command);
	/* stop dma */
	hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command);
	dma_stat = hwif->INB(hwif->dma_status);
	/* clear errors */
	hwif->OUTB(dma_stat | 0x6, hwif->dma_status);
}

static int hpt370_ide_dma_timeout (ide_drive_t *drive)
{
	hpt370_lostirq_timeout(drive);
	hpt370_clear_engine(drive);
	return __ide_dma_timeout(drive);
}

static int hpt370_ide_dma_lostirq (ide_drive_t *drive)
{
	hpt370_lostirq_timeout(drive);
	hpt370_clear_engine(drive);
	return __ide_dma_lostirq(drive);
}

/* returns 1 if DMA IRQ issued, 0 otherwise */
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
	ide_hwif_t *hwif	= HWIF(drive);
	u16 bfifo		= 0;
	u8 reginfo		= hwif->channel ? 0x56 : 0x52;
	u8 dma_stat;

	pci_read_config_word(hwif->pci_dev, reginfo, &bfifo);
	if (bfifo & 0x1FF) {
//		printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
		return 0;
	}

	dma_stat = hwif->INB(hwif->dma_status);
	/* return 1 if INTR asserted */
	if ((dma_stat & 4) == 4)
		return 1;

	if (!drive->waiting_for_dma)
		printk(KERN_WARNING "%s: (%s) called while not waiting\n",
				drive->name, __FUNCTION__);
	return 0;
}

static int hpt374_ide_dma_end (ide_drive_t *drive)
{
	struct pci_dev *dev	= HWIF(drive)->pci_dev;
	ide_hwif_t *hwif	= HWIF(drive);
	u8 msc_stat = 0, mscreg	= hwif->channel ? 0x54 : 0x50;
	u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01;

	pci_read_config_byte(dev, 0x6a, &bwsr_stat);
	pci_read_config_byte(dev, mscreg, &msc_stat);
	if ((bwsr_stat & bwsr_mask) == bwsr_mask)
		pci_write_config_byte(dev, mscreg, msc_stat|0x30);
	return __ide_dma_end(drive);
}

/**
 *	hpt372n_set_clock	-	perform clock switching dance
 *	@drive: Drive to switch
 *	@mode: Switching mode (0x21 for write, 0x23 otherwise)
 *
 *	Switch the DPLL clock on the HPT372N devices. This is a
 *	right mess.
 */
 
static void hpt372n_set_clock(ide_drive_t *drive, int mode)
{
	ide_hwif_t *hwif	= HWIF(drive);
	
	/* FIXME: should we check for DMA active and BUG() */
	/* Tristate the bus */
	outb(0x80, hwif->dma_base+0x73);
	outb(0x80, hwif->dma_base+0x77);
	
	/* Switch clock and reset channels */
	outb(mode, hwif->dma_base+0x7B);
	outb(0xC0, hwif->dma_base+0x79);
	
	/* Reset state machines */
	outb(0x37, hwif->dma_base+0x70);
	outb(0x37, hwif->dma_base+0x74);
	
	/* Complete reset */
	outb(0x00, hwif->dma_base+0x79);
	
	/* Reconnect channels to bus */
	outb(0x00, hwif->dma_base+0x73);
	outb(0x00, hwif->dma_base+0x77);
}

/**
 *	hpt372n_rw_disk		-	prepare for I/O
 *	@drive: drive for command
 *	@rq: block request structure
 *
 *	This is called when a disk I/O is issued to the 372N.
 *	We need it because of the clock switching.
 */

static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq)
{
	ide_hwif_t *hwif = drive->hwif;
	int wantclock;

	wantclock = rq_data_dir(rq) ? 0x23 : 0x21;

	if (hwif->config_data != wantclock) {
		hpt372n_set_clock(drive, wantclock);
		hwif->config_data = wantclock;
	}
}

/*
 * Since SUN Cobalt is attempting to do this operation, I should disclose
 * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date
 * HOTSWAP ATA Infrastructure.
 */

static void hpt3xx_reset (ide_drive_t *drive)
{
}

static int hpt3xx_tristate (ide_drive_t * drive, int state)
{
	ide_hwif_t *hwif	= HWIF(drive);
	struct pci_dev *dev	= hwif->pci_dev;
	u8 reg59h = 0, reset	= (hwif->channel) ? 0x80 : 0x40;
	u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53;

	pci_read_config_byte(dev, 0x59, &reg59h);
	pci_read_config_byte(dev, state_reg, &regXXh);

	if (state) {
		(void) ide_do_reset(drive);
		pci_write_config_byte(dev, state_reg, regXXh|0x80);
		pci_write_config_byte(dev, 0x59, reg59h|reset);
	} else {
		pci_write_config_byte(dev, 0x59, reg59h & ~(reset));
		pci_write_config_byte(dev, state_reg, regXXh & ~(0x80));
		(void) ide_do_reset(drive);
	}
	return 0;
}

/* 
 * set/get power state for a drive.
 * turning the power off does the following things:
 *   1) soft-reset the drive
 *   2) tri-states the ide bus
 *
 * when we turn things back on, we need to re-initialize things.
 */
#define TRISTATE_BIT  0x8000
static int hpt370_busproc(ide_drive_t * drive, int state)
{
	ide_hwif_t *hwif	= drive->hwif;
	struct pci_dev *dev	= hwif->pci_dev;
	u8 tristate = 0, resetmask = 0, bus_reg = 0;
	u16 tri_reg;

	hwif->bus_state = state;

	if (hwif->channel) { 
		/* secondary channel */
		tristate = 0x56;
		resetmask = 0x80; 
	} else { 
		/* primary channel */
		tristate = 0x52;
		resetmask = 0x40;
	}

	/* grab status */
	pci_read_config_word(dev, tristate, &tri_reg);
	pci_read_config_byte(dev, 0x59, &bus_reg);

	/* set the state. we don't set it if we don't need to do so.
	 * make sure that the drive knows that it has failed if it's off */
	switch (state) {
	case BUSSTATE_ON:
		hwif->drives[0].failures = 0;
		hwif->drives[1].failures = 0;
		if ((bus_reg & resetmask) == 0)
			return 0;
		tri_reg &= ~TRISTATE_BIT;
		bus_reg &= ~resetmask;
		break;
	case BUSSTATE_OFF:
		hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
		hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
		if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask))
			return 0;
		tri_reg &= ~TRISTATE_BIT;
		bus_reg |= resetmask;
		break;
	case BUSSTATE_TRISTATE:
		hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
		hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
		if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask))
			return 0;
		tri_reg |= TRISTATE_BIT;
		bus_reg |= resetmask;
		break;
	}
	pci_write_config_byte(dev, 0x59, bus_reg);
	pci_write_config_word(dev, tristate, tri_reg);

	return 0;
}

static void __devinit hpt366_clocking(ide_hwif_t *hwif)
{
	u32 reg1	= 0;
	struct hpt_info *info = ide_get_hwifdata(hwif);

	pci_read_config_dword(hwif->pci_dev, 0x40, &reg1);

	/* detect bus speed by looking at control reg timing: */
	switch((reg1 >> 8) & 7) {
		case 5:
			info->speed = forty_base_hpt366;
			break;
		case 9:
			info->speed = twenty_five_base_hpt366;
			break;
		case 7:
		default:
			info->speed = thirty_three_base_hpt366;
			break;
	}
}

static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
{
	struct hpt_info *info = ide_get_hwifdata(hwif);
	struct pci_dev *dev = hwif->pci_dev;
	int adjust, i;
	u16 freq;
	u32 pll;
	u8 reg5bh;
	
	/*
	 * default to pci clock. make sure MA15/16 are set to output
	 * to prevent drives having problems with 40-pin cables. Needed
	 * for some drives such as IBM-DTLA which will not enter ready
	 * state on reset when PDIAG is a input.
	 *
	 * ToDo: should we set 0x21 when using PLL mode ?
	 */
	pci_write_config_byte(dev, 0x5b, 0x23);

	/*
	 * set up the PLL. we need to adjust it so that it's stable. 
	 * freq = Tpll * 192 / Tpci
	 *
	 * Todo. For non x86 should probably check the dword is
	 * set to 0xABCDExxx indicating the BIOS saved f_CNT
	 */
	pci_read_config_word(dev, 0x78, &freq);
	freq &= 0x1FF;
	
	/*
	 * The 372N uses different PCI clock information and has
	 * some other complications
	 *	On PCI33 timing we must clock switch
	 *	On PCI66 timing we must NOT use the PCI clock
	 *
	 * Currently we always set up the PLL for the 372N
	 */
	 
	if(info->flags & IS_372N)
	{
		printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n");
		if(freq < 0x55)
			pll = F_LOW_PCI_33;
		else if(freq < 0x70)
			pll = F_LOW_PCI_40;
		else if(freq < 0x7F)
			pll = F_LOW_PCI_50;
		else
			pll = F_LOW_PCI_66;
			
		printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll);
			
		/* We always use the pll not the PCI clock on 372N */
	}
	else
	{
		if(freq < 0x9C)
			pll = F_LOW_PCI_33;
		else if(freq < 0xb0)
			pll = F_LOW_PCI_40;
		else if(freq <0xc8)
			pll = F_LOW_PCI_50;
		else
			pll = F_LOW_PCI_66;
	
		if (pll == F_LOW_PCI_33) {
			if (info->revision >= 8)
				info->speed = thirty_three_base_hpt374;
			else if (info->revision >= 5)
				info->speed = thirty_three_base_hpt372;
			else if (info->revision >= 4)
				info->speed = thirty_three_base_hpt370a;
			else
				info->speed = thirty_three_base_hpt370;
			printk(KERN_DEBUG "HPT37X: using 33MHz PCI clock\n");
		} else if (pll == F_LOW_PCI_40) {
			/* Unsupported */
		} else if (pll == F_LOW_PCI_50) {
			if (info->revision >= 8)
				info->speed = fifty_base_hpt370a;
			else if (info->revision >= 5)
				info->speed = fifty_base_hpt372;
			else if (info->revision >= 4)
				info->speed = fifty_base_hpt370a;
			else
				info->speed = fifty_base_hpt370a;
			printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n");
		} else {
			if (info->revision >= 8) {
				printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n");
			}
			else if (info->revision >= 5)
				info->speed = sixty_six_base_hpt372;
			else if (info->revision >= 4)
				info->speed = sixty_six_base_hpt370a;
			else
				info->speed = sixty_six_base_hpt370;
			printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n");
		}
	}
	
	/*
	 * only try the pll if we don't have a table for the clock
	 * speed that we're running at. NOTE: the internal PLL will
	 * result in slow reads when using a 33MHz PCI clock. we also
	 * don't like to use the PLL because it will cause glitches
	 * on PRST/SRST when the HPT state engine gets reset.
	 *
	 * ToDo: Use 66MHz PLL when ATA133 devices are present on a
	 * 372 device so we can get ATA133 support
	 */
	if (info->speed)
		goto init_hpt37X_done;

	info->flags |= PLL_MODE;
	
	/*
	 * FIXME: make this work correctly, esp with 372N as per
	 * reference driver code.
	 *
	 * adjust PLL based upon PCI clock, enable it, and wait for
	 * stabilization.
	 */
	adjust = 0;
	freq = (pll < F_LOW_PCI_50) ? 2 : 4;
	while (adjust++ < 6) {
		pci_write_config_dword(dev, 0x5c, (freq + pll) << 16 |
				       pll | 0x100);

		/* wait for clock stabilization */
		for (i = 0; i < 0x50000; i++) {
			pci_read_config_byte(dev, 0x5b, &reg5bh);
			if (reg5bh & 0x80) {
				/* spin looking for the clock to destabilize */
				for (i = 0; i < 0x1000; ++i) {
					pci_read_config_byte(dev, 0x5b, 
							     &reg5bh);
					if ((reg5bh & 0x80) == 0)
						goto pll_recal;
				}
				pci_read_config_dword(dev, 0x5c, &pll);
				pci_write_config_dword(dev, 0x5c, 
						       pll & ~0x100);
				pci_write_config_byte(dev, 0x5b, 0x21);
				if (info->revision >= 8)
					info->speed = fifty_base_hpt370a;
				else if (info->revision >= 5)
					info->speed = fifty_base_hpt372;
				else if (info->revision >= 4)
					info->speed = fifty_base_hpt370a;
				else
					info->speed = fifty_base_hpt370a;
				printk("HPT37X: using 50MHz internal PLL\n");
				goto init_hpt37X_done;
			}
		}
pll_recal:
		if (adjust & 1)
			pll -= (adjust >> 1);
		else
			pll += (adjust >> 1);
	} 

init_hpt37X_done:
	if (!info->speed)
		printk(KERN_ERR "HPT37X%s: unknown bus timing [%d %d].\n",
			(info->flags & IS_372N)?"N":"", pll, freq);
	/* reset state engine */
	pci_write_config_byte(dev, 0x50, 0x37); 
	pci_write_config_byte(dev, 0x54, 0x37); 
	udelay(100);
}

static int __devinit init_hpt37x(struct pci_dev *dev)
{
	u8 reg5ah;

	pci_read_config_byte(dev, 0x5a, &reg5ah);
	/* interrupt force enable */
	pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10));
	return 0;
}

static int __devinit init_hpt366(struct pci_dev *dev)
{
	u32 reg1	= 0;
	u8 drive_fast	= 0;

	/*
	 * Disable the "fast interrupt" prediction.
	 */
	pci_read_config_byte(dev, 0x51, &drive_fast);
	if (drive_fast & 0x80)
		pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
	pci_read_config_dword(dev, 0x40, &reg1);
									
	return 0;
}

static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
{
	int ret = 0;

	/*
	 * FIXME: Not portable. Also, why do we enable the ROM in the first place?
	 * We don't seem to be using it.
	 */
	if (dev->resource[PCI_ROM_RESOURCE].start)
		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);

	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
	pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
	pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);

	if (hpt_revision(dev) >= 3)
		ret = init_hpt37x(dev);
	else
		ret = init_hpt366(dev);

	if (ret)
		return ret;

	return dev->irq;
}

static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
	struct pci_dev *dev		= hwif->pci_dev;
	struct hpt_info *info		= ide_get_hwifdata(hwif);
	u8 ata66 = 0, regmask		= (hwif->channel) ? 0x01 : 0x02;
	
	hwif->tuneproc			= &hpt3xx_tune_drive;
	hwif->speedproc			= &hpt3xx_tune_chipset;
	hwif->quirkproc			= &hpt3xx_quirkproc;
	hwif->intrproc			= &hpt3xx_intrproc;
	hwif->maskproc			= &hpt3xx_maskproc;
	
	if(info->flags & IS_372N)
		hwif->rw_disk = &hpt372n_rw_disk;

	/*
	 * The HPT37x uses the CBLID pins as outputs for MA15/MA16
	 * address lines to access an external eeprom.  To read valid
	 * cable detect state the pins must be enabled as inputs.
	 */
	if (info->revision >= 8 && (PCI_FUNC(dev->devfn) & 1)) {
		/*
		 * HPT374 PCI function 1
		 * - set bit 15 of reg 0x52 to enable TCBLID as input
		 * - set bit 15 of reg 0x56 to enable FCBLID as input
		 */
		u16 mcr3, mcr6;
		pci_read_config_word(dev, 0x52, &mcr3);
		pci_read_config_word(dev, 0x56, &mcr6);
		pci_write_config_word(dev, 0x52, mcr3 | 0x8000);
		pci_write_config_word(dev, 0x56, mcr6 | 0x8000);
		/* now read cable id register */
		pci_read_config_byte(dev, 0x5a, &ata66);
		pci_write_config_word(dev, 0x52, mcr3);
		pci_write_config_word(dev, 0x56, mcr6);
	} else if (info->revision >= 3) {
		/*
		 * HPT370/372 and 374 pcifn 0
		 * - clear bit 0 of 0x5b to enable P/SCBLID as inputs
		 */
		u8 scr2;
		pci_read_config_byte(dev, 0x5b, &scr2);
		pci_write_config_byte(dev, 0x5b, scr2 & ~1);
		/* now read cable id register */
		pci_read_config_byte(dev, 0x5a, &ata66);
		pci_write_config_byte(dev, 0x5b, scr2);
	} else {
		pci_read_config_byte(dev, 0x5a, &ata66);
	}

#ifdef DEBUG
	printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n",
		ata66, (ata66 & regmask) ? "33" : "66",
		PCI_FUNC(hwif->pci_dev->devfn));
#endif /* DEBUG */

#ifdef HPT_SERIALIZE_IO
	/* serialize access to this device */
	if (hwif->mate)
		hwif->serialized = hwif->mate->serialized = 1;
#endif

	if (info->revision >= 3) {
		u8 reg5ah = 0;
			pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
		/*
		 * set up ioctl for power status.
		 * note: power affects both
		 * drives on each channel
		 */
		hwif->resetproc	= &hpt3xx_reset;
		hwif->busproc	= &hpt370_busproc;
	} else if (info->revision >= 2) {
		hwif->resetproc	= &hpt3xx_reset;
		hwif->busproc	= &hpt3xx_tristate;
	} else {
		hwif->resetproc = &hpt3xx_reset;
		hwif->busproc   = &hpt3xx_tristate;
	}

	if (!hwif->dma_base) {
		hwif->drives[0].autotune = 1;
		hwif->drives[1].autotune = 1;
		return;
	}

	hwif->ultra_mask = 0x7f;
	hwif->mwdma_mask = 0x07;

	if (!(hwif->udma_four))
		hwif->udma_four = ((ata66 & regmask) ? 0 : 1);
	hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;

	if (info->revision >= 8) {
		hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
		hwif->ide_dma_end = &hpt374_ide_dma_end;
	} else if (info->revision >= 5) {
		hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
		hwif->ide_dma_end = &hpt374_ide_dma_end;
	} else if (info->revision >= 3) {
		hwif->dma_start = &hpt370_ide_dma_start;
		hwif->ide_dma_end = &hpt370_ide_dma_end;
		hwif->ide_dma_timeout = &hpt370_ide_dma_timeout;
		hwif->ide_dma_lostirq = &hpt370_ide_dma_lostirq;
	} else if (info->revision >= 2)
		hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;
	else
		hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;

	if (!noautodma)
		hwif->autodma = 1;
	hwif->drives[0].autodma = hwif->autodma;
	hwif->drives[1].autodma = hwif->autodma;
}

static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
	struct hpt_info	*info	= ide_get_hwifdata(hwif);
	u8 masterdma	= 0, slavedma = 0;
	u8 dma_new	= 0, dma_old = 0;
	u8 primary	= hwif->channel ? 0x4b : 0x43;
	u8 secondary	= hwif->channel ? 0x4f : 0x47;
	unsigned long flags;

	if (!dmabase)
		return;
		
	if(info->speed == NULL) {
		printk(KERN_WARNING "hpt: no known IDE timings, disabling DMA.\n");
		return;
	}

	dma_old = hwif->INB(dmabase+2);

	local_irq_save(flags);

	dma_new = dma_old;
	pci_read_config_byte(hwif->pci_dev, primary, &masterdma);
	pci_read_config_byte(hwif->pci_dev, secondary, &slavedma);

	if (masterdma & 0x30)	dma_new |= 0x20;
	if (slavedma & 0x30)	dma_new |= 0x40;
	if (dma_new != dma_old)
		hwif->OUTB(dma_new, dmabase+2);

	local_irq_restore(flags);

	ide_setup_dma(hwif, dmabase, 8);
}

/*
 *	We "borrow" this hook in order to set the data structures
 *	up early enough before dma or init_hwif calls are made.
 */

static void __devinit init_iops_hpt366(ide_hwif_t *hwif)
{
	struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL);
	unsigned long dmabase = pci_resource_start(hwif->pci_dev, 4);
	u8 did, rid;

	if(info == NULL) {
		printk(KERN_WARNING "hpt366: out of memory.\n");
		return;
	}
	ide_set_hwifdata(hwif, info);

	if(dmabase) {
		did = inb(dmabase + 0x22);
		rid = inb(dmabase + 0x28);

		if((did == 4 && rid == 6) || (did == 5 && rid > 1))
			info->flags |= IS_372N;
	}

	info->revision = hpt_revision(hwif->pci_dev);

	if (info->revision >= 3)
		hpt37x_clocking(hwif);
	else
		hpt366_clocking(hwif);
}

static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
{
	struct pci_dev *findev = NULL;

	if (PCI_FUNC(dev->devfn) & 1)
		return -ENODEV;

	while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
		if ((findev->vendor == dev->vendor) &&
		    (findev->device == dev->device) &&
		    ((findev->devfn - dev->devfn) == 1) &&
		    (PCI_FUNC(findev->devfn) & 1)) {
			if (findev->irq != dev->irq) {
				/* FIXME: we need a core pci_set_interrupt() */
				findev->irq = dev->irq;
				printk(KERN_WARNING "%s: pci-config space interrupt "
					"fixed.\n", d->name);
			}
			return ide_setup_pci_devices(dev, findev, d);
		}
	}
	return ide_setup_pci_device(dev, d);
}

static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d)
{
	return ide_setup_pci_device(dev, d);
}

static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
	struct pci_dev *findev = NULL;
	u8 pin1 = 0, pin2 = 0;
	unsigned int class_rev;
	char *chipset_names[] = {"HPT366", "HPT366",  "HPT368",
				 "HPT370", "HPT370A", "HPT372",
				 "HPT372N" };

	if (PCI_FUNC(dev->devfn) & 1)
		return -ENODEV;

	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
	class_rev &= 0xff;

	if(dev->device == PCI_DEVICE_ID_TTI_HPT372N)
		class_rev = 6;
		
	if(class_rev <= 6)
		d->name = chipset_names[class_rev];

	switch(class_rev) {
		case 6:
		case 5:
		case 4:
		case 3:
			goto init_single;
		default:
			break;
	}

	d->channels = 1;

	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
	while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
		if ((findev->vendor == dev->vendor) &&
		    (findev->device == dev->device) &&
		    ((findev->devfn - dev->devfn) == 1) &&
		    (PCI_FUNC(findev->devfn) & 1)) {
			pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2);
			if ((pin1 != pin2) && (dev->irq == findev->irq)) {
				d->bootable = ON_BOARD;
				printk("%s: onboard version of chipset, "
					"pin1=%d pin2=%d\n", d->name,
					pin1, pin2);
			}
			return ide_setup_pci_devices(dev, findev, d);
		}
	}
init_single:
	return ide_setup_pci_device(dev, d);
}

static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
	{	/* 0 */
		.name		= "HPT366",
		.init_setup	= init_setup_hpt366,
		.init_chipset	= init_chipset_hpt366,
		.init_iops	= init_iops_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
		.extra		= 240
	},{	/* 1 */
		.name		= "HPT372A",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_iops	= init_iops_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 2 */
		.name		= "HPT302",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_iops	= init_iops_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 3 */
		.name		= "HPT371",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_iops	= init_iops_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 4 */
		.name		= "HPT374",
		.init_setup	= init_setup_hpt374,
		.init_chipset	= init_chipset_hpt366,
		.init_iops	= init_iops_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,	/* 4 */
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	},{	/* 5 */
		.name		= "HPT372N",
		.init_setup	= init_setup_hpt37x,
		.init_chipset	= init_chipset_hpt366,
		.init_iops	= init_iops_hpt366,
		.init_hwif	= init_hwif_hpt366,
		.init_dma	= init_dma_hpt366,
		.channels	= 2,	/* 4 */
		.autodma	= AUTODMA,
		.bootable	= OFF_BOARD,
	}
};

/**
 *	hpt366_init_one	-	called when an HPT366 is found
 *	@dev: the hpt366 device
 *	@id: the matching pci id
 *
 *	Called when the PCI registration layer (or the IDE initialization)
 *	finds a device matching our IDE device tables.
 */
 
static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	ide_pci_device_t *d = &hpt366_chipsets[id->driver_data];

	return d->init_setup(dev, d);
}

static struct pci_device_id hpt366_pci_tbl[] = {
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT374, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
	{ PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT372N, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);

static struct pci_driver driver = {
	.name		= "HPT366_IDE",
	.id_table	= hpt366_pci_tbl,
	.probe		= hpt366_init_one,
};

static int hpt366_ide_init(void)
{
	return ide_pci_register_driver(&driver);
}

module_init(hpt366_ide_init);

MODULE_AUTHOR("Andre Hedrick");
MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE");
MODULE_LICENSE("GPL");