1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/*
* $Id: logibm.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
*
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* Based on the work of:
* James Banks Matthew Dillon
* David Giller Nathan Laredo
* Linus Torvalds Johan Myreen
* Cliff Matthews Philip Blundell
* Russell King
*/
/*
* Logitech Bus Mouse Driver for Linux
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/irq.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Logitech busmouse driver");
MODULE_LICENSE("GPL");
#define LOGIBM_BASE 0x23c
#define LOGIBM_EXTENT 4
#define LOGIBM_DATA_PORT LOGIBM_BASE + 0
#define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1
#define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2
#define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3
#define LOGIBM_ENABLE_IRQ 0x00
#define LOGIBM_DISABLE_IRQ 0x10
#define LOGIBM_READ_X_LOW 0x80
#define LOGIBM_READ_X_HIGH 0xa0
#define LOGIBM_READ_Y_LOW 0xc0
#define LOGIBM_READ_Y_HIGH 0xe0
#define LOGIBM_DEFAULT_MODE 0x90
#define LOGIBM_CONFIG_BYTE 0x91
#define LOGIBM_SIGNATURE_BYTE 0xa5
#define LOGIBM_IRQ 5
static int logibm_irq = LOGIBM_IRQ;
module_param_named(irq, logibm_irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
__obsolete_setup("logibm_irq=");
static struct input_dev *logibm_dev;
static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
char dx, dy;
unsigned char buttons;
outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT);
dx = (inb(LOGIBM_DATA_PORT) & 0xf);
outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT);
dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4;
outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT);
dy = (inb(LOGIBM_DATA_PORT) & 0xf);
outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT);
buttons = inb(LOGIBM_DATA_PORT);
dy |= (buttons & 0xf) << 4;
buttons = ~buttons >> 5;
input_regs(logibm_dev, regs);
input_report_rel(logibm_dev, REL_X, dx);
input_report_rel(logibm_dev, REL_Y, dy);
input_report_key(logibm_dev, BTN_RIGHT, buttons & 1);
input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2);
input_report_key(logibm_dev, BTN_LEFT, buttons & 4);
input_sync(logibm_dev);
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
return IRQ_HANDLED;
}
static int logibm_open(struct input_dev *dev)
{
if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
return -EBUSY;
}
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
return 0;
}
static void logibm_close(struct input_dev *dev)
{
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
free_irq(logibm_irq, NULL);
}
static int __init logibm_init(void)
{
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE);
return -EBUSY;
}
outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT);
udelay(100);
if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
return -ENODEV;
}
outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
if (!(logibm_dev = input_allocate_device())) {
printk(KERN_ERR "logibm.c: Not enough memory for input device\n");
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
return -ENOMEM;
}
logibm_dev->name = "Logitech bus mouse";
logibm_dev->phys = "isa023c/input0";
logibm_dev->id.bustype = BUS_ISA;
logibm_dev->id.vendor = 0x0003;
logibm_dev->id.product = 0x0001;
logibm_dev->id.version = 0x0100;
logibm_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
logibm_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
logibm_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
logibm_dev->open = logibm_open;
logibm_dev->close = logibm_close;
input_register_device(logibm_dev);
return 0;
}
static void __exit logibm_exit(void)
{
input_unregister_device(logibm_dev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
}
module_init(logibm_init);
module_exit(logibm_exit);
|
