1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/*
* Driver for Silicon Labs C8051F300 microcontroller.
*
* It is used for LNB power control in TeVii S470,
* TBS 6920 PCIe DVB-S2 cards.
*
* Microcontroller connected to cx23885 GPIO pins:
* GPIO0 - data - P0.3 F300
* GPIO1 - reset - P0.2 F300
* GPIO2 - clk - P0.1 F300
* GPIO3 - busy - P0.0 F300
*
* Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "cx23885.h"
#include "cx23885-f300.h"
#define F300_DATA GPIO_0
#define F300_RESET GPIO_1
#define F300_CLK GPIO_2
#define F300_BUSY GPIO_3
static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl)
{
cx23885_gpio_enable(dev, line, 1);
if (lvl == 1)
cx23885_gpio_set(dev, line);
else
cx23885_gpio_clear(dev, line);
}
static u8 f300_get_line(struct cx23885_dev *dev, u32 line)
{
cx23885_gpio_enable(dev, line, 0);
return cx23885_gpio_get(dev, line);
}
static void f300_send_byte(struct cx23885_dev *dev, u8 dta)
{
u8 i;
for (i = 0; i < 8; i++) {
f300_set_line(dev, F300_CLK, 0);
udelay(30);
f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */
udelay(30);
dta <<= 1;
f300_set_line(dev, F300_CLK, 1);
udelay(30);
}
}
static u8 f300_get_byte(struct cx23885_dev *dev)
{
u8 i, dta = 0;
for (i = 0; i < 8; i++) {
f300_set_line(dev, F300_CLK, 0);
udelay(30);
dta <<= 1;
f300_set_line(dev, F300_CLK, 1);
udelay(30);
dta |= f300_get_line(dev, F300_DATA);/* msb first */
}
return dta;
}
static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
{
struct cx23885_tsport *port = fe->dvb->priv;
struct cx23885_dev *dev = port->dev;
u8 i, temp, ret = 0;
temp = buf[0];
for (i = 0; i < buf[0]; i++)
temp += buf[i + 1];
temp = (~temp + 1);/* get check sum */
buf[1 + buf[0]] = temp;
f300_set_line(dev, F300_RESET, 1);
f300_set_line(dev, F300_CLK, 1);
udelay(30);
f300_set_line(dev, F300_DATA, 1);
msleep(1);
/* question: */
f300_set_line(dev, F300_RESET, 0);/* begin to send data */
msleep(1);
f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
msleep(1);
temp = buf[0];
temp += 2;
for (i = 0; i < temp; i++)
f300_send_byte(dev, buf[i]);
f300_set_line(dev, F300_RESET, 1);/* sent data over */
f300_set_line(dev, F300_DATA, 1);
/* answer: */
temp = 0;
for (i = 0; ((i < 8) & (temp == 0)); i++) {
msleep(1);
if (f300_get_line(dev, F300_BUSY) == 0)
temp = 1;
}
if (i > 7) {
printk(KERN_ERR "%s: timeout, the slave no response\n",
__func__);
ret = 1; /* timeout, the slave no response */
} else { /* the slave not busy, prepare for getting data */
f300_set_line(dev, F300_RESET, 0);/*ready...*/
msleep(1);
f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
msleep(1);
temp = f300_get_byte(dev);/*get the data length */
if (temp > 14)
temp = 14;
for (i = 0; i < (temp + 1); i++)
f300_get_byte(dev);/* get data to empty buffer */
f300_set_line(dev, F300_RESET, 1);/* received data over */
f300_set_line(dev, F300_DATA, 1);
}
return ret;
}
int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
u8 buf[16];
buf[0] = 0x05;
buf[1] = 0x38;/* write port */
buf[2] = 0x01;/* A port, lnb power */
switch (voltage) {
case SEC_VOLTAGE_13:
buf[3] = 0x01;/* power on */
buf[4] = 0x02;/* B port, H/V */
buf[5] = 0x00;/*13V v*/
break;
case SEC_VOLTAGE_18:
buf[3] = 0x01;
buf[4] = 0x02;
buf[5] = 0x01;/* 18V h*/
break;
case SEC_VOLTAGE_OFF:
buf[3] = 0x00;/* power off */
buf[4] = 0x00;
buf[5] = 0x00;
break;
}
return f300_xfer(fe, buf);
}
|
