1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
|
/*
* The Capture code for Fujitsu M-5MOLS ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
* Author: HeungJun Kim, riverful.kim@samsung.com
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
* Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/version.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <linux/version.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#include <media/m5mols.h>
#include "m5mols.h"
#include "m5mols_reg.h"
static int m5mols_capture_error_handler(struct m5mols_info *info,
int timeout)
{
int ret;
/* Disable all interrupts and clear relevant interrupt staus bits */
ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE,
info->interrupt & ~(REG_INT_CAPTURE));
if (ret)
return ret;
if (timeout == 0)
return -ETIMEDOUT;
return 0;
}
/**
* m5mols_read_rational - I2C read of a rational number
*
* Read numerator and denominator from registers @addr_num and @addr_den
* respectively and return the division result in @val.
*/
static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
u32 addr_den, u32 *val)
{
u32 num, den;
int ret = m5mols_read_u32(sd, addr_num, &num);
if (!ret)
ret = m5mols_read_u32(sd, addr_den, &den);
if (ret)
return ret;
*val = den == 0 ? 0 : num / den;
return ret;
}
/**
* m5mols_capture_info - Gather captured image information
*
* For now it gathers only EXIF information and file size.
*/
static int m5mols_capture_info(struct m5mols_info *info)
{
struct m5mols_exif *exif = &info->cap.exif;
struct v4l2_subdev *sd = &info->sd;
int ret;
ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU,
EXIF_INFO_EXPTIME_DE, &exif->exposure_time);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE,
&exif->shutter_speed);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE,
&exif->aperture);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE,
&exif->brightness);
if (ret)
return ret;
ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE,
&exif->exposure_bias);
if (ret)
return ret;
ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
if (!ret)
ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
if (!ret)
ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
if (!ret)
ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
if (ret)
return ret;
if (!ret)
ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
if (!ret)
ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
if (!ret)
info->cap.total = info->cap.main + info->cap.thumb;
return ret;
}
int m5mols_start_capture(struct m5mols_info *info)
{
struct v4l2_subdev *sd = &info->sd;
u8 resolution = info->resolution;
int timeout;
int ret;
/*
* Preparing capture. Setting control & interrupt before entering
* capture mode
*
* 1) change to MONITOR mode for operating control & interrupt
* 2) set controls (considering v4l2_control value & lock 3A)
* 3) set interrupt
* 4) change to CAPTURE mode
*/
ret = m5mols_mode(info, REG_MONITOR);
if (!ret)
ret = m5mols_sync_controls(info);
if (!ret)
ret = m5mols_lock_3a(info, true);
if (!ret)
ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
if (!ret)
ret = m5mols_mode(info, REG_CAPTURE);
if (!ret) {
/* Wait for capture interrupt, after changing capture mode */
timeout = wait_event_interruptible_timeout(info->irq_waitq,
test_bit(ST_CAPT_IRQ, &info->flags),
msecs_to_jiffies(2000));
if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags))
ret = m5mols_capture_error_handler(info, timeout);
}
if (!ret)
ret = m5mols_lock_3a(info, false);
if (ret)
return ret;
/*
* Starting capture. Setting capture frame count and resolution and
* the format(available format: JPEG, Bayer RAW, YUV).
*
* 1) select single or multi(enable to 25), format, size
* 2) set interrupt
* 3) start capture(for main image, now)
* 4) get information
* 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device)
*/
ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
if (!ret)
ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
if (!ret)
ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution);
if (!ret)
ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
if (!ret)
ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
if (!ret) {
/* Wait for the capture completion interrupt */
timeout = wait_event_interruptible_timeout(info->irq_waitq,
test_bit(ST_CAPT_IRQ, &info->flags),
msecs_to_jiffies(2000));
if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) {
ret = m5mols_capture_info(info);
if (!ret)
v4l2_subdev_notify(sd, 0, &info->cap.total);
}
}
return m5mols_capture_error_handler(info, timeout);
}
|
