1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
|
/*
* This file is part of wl12xx
*
* Copyright (c) 1998-2007 Texas Instruments Incorporated
* Copyright (C) 2008 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL1251_TX_H__
#define __WL1251_TX_H__
#include <linux/bitops.h>
/*
*
* TX PATH
*
* The Tx path uses a double buffer and a tx_control structure, each located
* at a fixed address in the device's memory. On startup, the host retrieves
* the pointers to these addresses. A double buffer allows for continuous data
* flow towards the device. The host keeps track of which buffer is available
* and alternates between these two buffers on a per packet basis.
*
* The size of each of the two buffers is large enough to hold the longest
* 802.3 packet - maximum size Ethernet packet + header + descriptor.
* TX complete indication will be received a-synchronously in a TX done cyclic
* buffer which is composed of 16 tx_result descriptors structures and is used
* in a cyclic manner.
*
* The TX (HOST) procedure is as follows:
* 1. Read the Tx path status, that will give the data_out_count.
* 2. goto 1, if not possible.
* i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
* buffer).
* 3. Copy the packet (preceded by double_buffer_desc), if possible.
* i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
* buffer).
* 4. increment data_in_count.
* 5. Inform the firmware by generating a firmware internal interrupt.
* 6. FW will increment data_out_count after it reads the buffer.
*
* The TX Complete procedure:
* 1. To get a TX complete indication the host enables the tx_complete flag in
* the TX descriptor Structure.
* 2. For each packet with a Tx Complete field set, the firmware adds the
* transmit results to the cyclic buffer (txDoneRing) and sets both done_1
* and done_2 to 1 to indicate driver ownership.
* 3. The firmware sends a Tx Complete interrupt to the host to trigger the
* host to process the new data. Note: interrupt will be send per packet if
* TX complete indication was requested in tx_control or per crossing
* aggregation threshold.
* 4. After receiving the Tx Complete interrupt, the host reads the
* TxDescriptorDone information in a cyclic manner and clears both done_1
* and done_2 fields.
*
*/
#define TX_COMPLETE_REQUIRED_BIT 0x80
#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
#define WL1251_TX_ALIGN_TO 4
#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
~(WL1251_TX_ALIGN_TO - 1))
#define WL1251_TKIP_IV_SPACE 4
struct tx_control {
/* Rate Policy (class) index */
unsigned rate_policy:3;
/* When set, no ack policy is expected */
unsigned ack_policy:1;
/*
* Packet type:
* 0 -> 802.11
* 1 -> 802.3
* 2 -> IP
* 3 -> raw codec
*/
unsigned packet_type:2;
/* If set, this is a QoS-Null or QoS-Data frame */
unsigned qos:1;
/*
* If set, the target triggers the tx complete INT
* upon frame sending completion.
*/
unsigned tx_complete:1;
/* 2 bytes padding before packet header */
unsigned xfer_pad:1;
unsigned reserved:7;
} __attribute__ ((packed));
struct tx_double_buffer_desc {
/* Length of payload, including headers. */
u16 length;
/*
* A bit mask that specifies the initial rate to be used
* Possible values are:
* 0x0001 - 1Mbits
* 0x0002 - 2Mbits
* 0x0004 - 5.5Mbits
* 0x0008 - 6Mbits
* 0x0010 - 9Mbits
* 0x0020 - 11Mbits
* 0x0040 - 12Mbits
* 0x0080 - 18Mbits
* 0x0100 - 22Mbits
* 0x0200 - 24Mbits
* 0x0400 - 36Mbits
* 0x0800 - 48Mbits
* 0x1000 - 54Mbits
*/
u16 rate;
/* Time in us that a packet can spend in the target */
u32 expiry_time;
/* index of the TX queue used for this packet */
u8 xmit_queue;
/* Used to identify a packet */
u8 id;
struct tx_control control;
/*
* The FW should cut the packet into fragments
* of this size.
*/
u16 frag_threshold;
/* Numbers of HW queue blocks to be allocated */
u8 num_mem_blocks;
u8 reserved;
} __attribute__ ((packed));
enum {
TX_SUCCESS = 0,
TX_DMA_ERROR = BIT(7),
TX_DISABLED = BIT(6),
TX_RETRY_EXCEEDED = BIT(5),
TX_TIMEOUT = BIT(4),
TX_KEY_NOT_FOUND = BIT(3),
TX_ENCRYPT_FAIL = BIT(2),
TX_UNAVAILABLE_PRIORITY = BIT(1),
};
struct tx_result {
/*
* Ownership synchronization between the host and
* the firmware. If done_1 and done_2 are cleared,
* owned by the FW (no info ready).
*/
u8 done_1;
/* same as double_buffer_desc->id */
u8 id;
/*
* Total air access duration consumed by this
* packet, including all retries and overheads.
*/
u16 medium_usage;
/* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
u32 medium_delay;
/* Time between host xfer and tx complete */
u32 fw_hnadling_time;
/* The LS-byte of the last TKIP sequence number. */
u8 lsb_seq_num;
/* Retry count */
u8 ack_failures;
/* At which rate we got a ACK */
u16 rate;
u16 reserved;
/* TX_* */
u8 status;
/* See done_1 */
u8 done_2;
} __attribute__ ((packed));
void wl1251_tx_work(struct work_struct *work);
void wl1251_tx_complete(struct wl12xx *wl);
void wl1251_tx_flush(struct wl12xx *wl);
#endif
|
