1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
|
/*
* exynos_tmu.h - Samsung EXYNOS TMU (Thermal Management Unit)
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
* Amit Daniel Kachhap <amit.daniel@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _EXYNOS_TMU_H
#define _EXYNOS_TMU_H
#include <linux/cpu_cooling.h>
#include "exynos_thermal_common.h"
enum calibration_type {
TYPE_ONE_POINT_TRIMMING,
TYPE_ONE_POINT_TRIMMING_25,
TYPE_ONE_POINT_TRIMMING_85,
TYPE_TWO_POINT_TRIMMING,
TYPE_NONE,
};
enum soc_type {
SOC_ARCH_EXYNOS3250 = 1,
SOC_ARCH_EXYNOS4210,
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
SOC_ARCH_EXYNOS5260,
SOC_ARCH_EXYNOS5420,
SOC_ARCH_EXYNOS5420_TRIMINFO,
SOC_ARCH_EXYNOS5440,
};
/**
* EXYNOS TMU supported features.
* TMU_SUPPORT_EMULATION - This features is used to set user defined
* temperature to the TMU controller.
* TMU_SUPPORT_MULTI_INST - This features denotes that the soc
* has many instances of TMU.
* TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
* sensors shares some common registers.
* TMU_SUPPORT - macro to compare the above features with the supplied.
*/
#define TMU_SUPPORT_EMULATION BIT(0)
#define TMU_SUPPORT_MULTI_INST BIT(1)
#define TMU_SUPPORT_ADDRESS_MULTIPLE BIT(2)
#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)
/**
* struct exynos_tmu_platform_data
* @threshold: basic temperature for generating interrupt
* 25 <= threshold <= 125 [unit: degree Celsius]
* @threshold_falling: differntial value for setting threshold
* of temperature falling interrupt.
* @trigger_levels: array for each interrupt levels
* [unit: degree Celsius]
* 0: temperature for trigger_level0 interrupt
* condition for trigger_level0 interrupt:
* current temperature > threshold + trigger_levels[0]
* 1: temperature for trigger_level1 interrupt
* condition for trigger_level1 interrupt:
* current temperature > threshold + trigger_levels[1]
* 2: temperature for trigger_level2 interrupt
* condition for trigger_level2 interrupt:
* current temperature > threshold + trigger_levels[2]
* 3: temperature for trigger_level3 interrupt
* condition for trigger_level3 interrupt:
* current temperature > threshold + trigger_levels[3]
* @trigger_type: defines the type of trigger. Possible values are,
* THROTTLE_ACTIVE trigger type
* THROTTLE_PASSIVE trigger type
* SW_TRIP trigger type
* HW_TRIP
* @trigger_enable[]: array to denote which trigger levels are enabled.
* 1 = enable trigger_level[] interrupt,
* 0 = disable trigger_level[] interrupt
* @max_trigger_level: max trigger level supported by the TMU
* @non_hw_trigger_levels: number of defined non-hardware trigger levels
* @gain: gain of amplifier in the positive-TC generator block
* 0 < gain <= 15
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
* 0 < reference_voltage <= 31
* @noise_cancel_mode: noise cancellation mode
* 000, 100, 101, 110 and 111 can be different modes
* @type: determines the type of SOC
* @efuse_value: platform defined fuse value
* @min_efuse_value: minimum valid trimming data
* @max_efuse_value: maximum valid trimming data
* @first_point_trim: temp value of the first point trimming
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
* @test_mux; information if SoC supports test MUX
* @cal_type: calibration type for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
* @features: a bitfield value indicating the features supported in SOC like
* emulation, multi instance etc
*
* This structure is required for configuration of exynos_tmu driver.
*/
struct exynos_tmu_platform_data {
u8 threshold;
u8 threshold_falling;
u8 trigger_levels[MAX_TRIP_COUNT];
enum trigger_type trigger_type[MAX_TRIP_COUNT];
bool trigger_enable[MAX_TRIP_COUNT];
u8 max_trigger_level;
u8 non_hw_trigger_levels;
u8 gain;
u8 reference_voltage;
u8 noise_cancel_mode;
u32 efuse_value;
u32 min_efuse_value;
u32 max_efuse_value;
u8 first_point_trim;
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
enum calibration_type cal_type;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
unsigned int features;
};
/**
* struct exynos_tmu_init_data
* @tmu_count: number of TMU instances.
* @tmu_data: platform data of all TMU instances.
* This structure is required to store data for multi-instance exynos tmu
* driver.
*/
struct exynos_tmu_init_data {
int tmu_count;
struct exynos_tmu_platform_data tmu_data[];
};
#endif /* _EXYNOS_TMU_H */
|
