1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
/*
* Geode GX display controller.
*
* Copyright (C) 2005 Arcom Control Systems Ltd.
*
* Portions from AMD's original 2.4 driver:
* Copyright (C) 2004 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by * the
* Free Software Foundation; either version 2 of the License, or * (at your
* option) any later version.
*/
#include <linux/spinlock.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/div64.h>
#include <asm/delay.h>
#include "geodefb.h"
#include "display_gx.h"
#include "gxfb.h"
unsigned int gx_frame_buffer_size(void)
{
unsigned int val;
/* FB size is reported by a virtual register */
/* Virtual register class = 0x02 */
/* VG_MEM_SIZE(512Kb units) = 0x00 */
outw(0xFC53, 0xAC1C);
outw(0x0200, 0xAC1C);
val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
return (val << 19);
}
int gx_line_delta(int xres, int bpp)
{
/* Must be a multiple of 8 bytes. */
return (xres * (bpp >> 3) + 7) & ~0x7;
}
static void gx_set_mode(struct fb_info *info)
{
struct geodefb_par *par = info->par;
u32 gcfg, dcfg;
int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
/* Unlock the display controller registers. */
write_dc(par, DC_UNLOCK, DC_UNLOCK_CODE);
gcfg = read_dc(par, DC_GENERAL_CFG);
dcfg = read_dc(par, DC_DISPLAY_CFG);
/* Disable the timing generator. */
dcfg &= ~(DC_DCFG_TGEN);
write_dc(par, DC_DISPLAY_CFG, dcfg);
/* Wait for pending memory requests before disabling the FIFO load. */
udelay(100);
/* Disable FIFO load and compression. */
gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
write_dc(par, DC_GENERAL_CFG, gcfg);
/* Setup DCLK and its divisor. */
par->vid_ops->set_dclk(info);
/*
* Setup new mode.
*/
/* Clear all unused feature bits. */
gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
dcfg = 0;
/* Set FIFO priority (default 6/5) and enable. */
/* FIXME: increase fifo priority for 1280x1024 and higher modes? */
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
/* Framebuffer start offset. */
write_dc(par, DC_FB_ST_OFFSET, 0);
/* Line delta and line buffer length. */
write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
write_dc(par, DC_LINE_SIZE,
((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2);
/* Enable graphics and video data and unmask address lines. */
dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
/* Set pixel format. */
switch (info->var.bits_per_pixel) {
case 8:
dcfg |= DC_DCFG_DISP_MODE_8BPP;
break;
case 16:
dcfg |= DC_DCFG_DISP_MODE_16BPP;
dcfg |= DC_DCFG_16BPP_MODE_565;
break;
case 32:
dcfg |= DC_DCFG_DISP_MODE_24BPP;
dcfg |= DC_DCFG_PALB;
break;
}
/* Enable timing generator. */
dcfg |= DC_DCFG_TGEN;
/* Horizontal and vertical timings. */
hactive = info->var.xres;
hblankstart = hactive;
hsyncstart = hblankstart + info->var.right_margin;
hsyncend = hsyncstart + info->var.hsync_len;
hblankend = hsyncend + info->var.left_margin;
htotal = hblankend;
vactive = info->var.yres;
vblankstart = vactive;
vsyncstart = vblankstart + info->var.lower_margin;
vsyncend = vsyncstart + info->var.vsync_len;
vblankend = vsyncend + info->var.upper_margin;
vtotal = vblankend;
write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) |
((htotal - 1) << 16));
write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) |
((hblankend - 1) << 16));
write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1) |
((hsyncend - 1) << 16));
write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) |
((vtotal - 1) << 16));
write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) |
((vblankend - 1) << 16));
write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1) |
((vsyncend - 1) << 16));
/* Write final register values. */
write_dc(par, DC_DISPLAY_CFG, dcfg);
write_dc(par, DC_GENERAL_CFG, gcfg);
par->vid_ops->configure_display(info);
/* Relock display controller registers */
write_dc(par, DC_UNLOCK, 0);
}
static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
unsigned red, unsigned green, unsigned blue)
{
struct geodefb_par *par = info->par;
int val;
/* Hardware palette is in RGB 8-8-8 format. */
val = (red << 8) & 0xff0000;
val |= (green) & 0x00ff00;
val |= (blue >> 8) & 0x0000ff;
write_dc(par, DC_PAL_ADDRESS, regno);
write_dc(par, DC_PAL_DATA, val);
}
struct geode_dc_ops gx_dc_ops = {
.set_mode = gx_set_mode,
.set_palette_reg = gx_set_hw_palette_reg,
};
|
