diff options
Diffstat (limited to 'slackware64-current/source/a/cups/cups.SlackBuild')
| -rwxr-xr-x | slackware64-current/source/a/cups/cups.SlackBuild | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/slackware64-current/source/a/cups/cups.SlackBuild b/slackware64-current/source/a/cups/cups.SlackBuild new file mode 100755 index 000000000..20d49dce3 --- /dev/null +++ b/slackware64-current/source/a/cups/cups.SlackBuild @@ -0,0 +1,201 @@ +#!/bin/sh + +# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, Minnesota, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# CUPS build script by volkerdi@slackware.com. + +VERSION=1.4.4 +BUILD=${BUILD:-1} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i486 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +if [ "$ARCH" = "x86_64" ]; then + LIBDIRSUFFIX="64" +else + LIBDIRSUFFIX="" +fi + +NUMJOBS=${NUMJOBS:-" -j7 "} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-cups + +rm -rf $PKG +mkdir -p $TMP $PKG + +cd $TMP +rm -rf cups-$VERSION +tar xvf $CWD/cups-$VERSION-source.tar.?z* || exit 1 +cd cups-$VERSION + +# Fix the USB backend to use either usblp or libusb: +zcat $CWD/usb-backend-both-usblp-and-libusb.dpatch.gz | patch -p1 --verbose || exit 1 + +sed -i.orig -e 's#$exec_prefix/lib/cups#$libdir/cups#g' configure +./configure \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --enable-ssl \ + --enable-openssl=yes \ + --enable-gnutls=no \ + --enable-cdsassl=no \ + --docdir=/usr/doc \ + --without-php \ + --disable-pam \ + --build=$ARCH-slackware-linux + +make $NUMJOBS || exit 1 +mkdir -p $PKG/etc/cups +mkdir -p $PKG/var/spool +make BUILDROOT=$PKG install || exit 1 + +# I've added so many things like /etc/init.d/ to Slackware that CUPS +# is now installing init scripts to the Red Hat locations. We'll move +# them to the usual locations: +mkdir -p $PKG/etc/rc.d +# Handle this as a config file, and non-executable in a default install: +mv $PKG/etc/init.d/cups $PKG/etc/rc.d/rc.cups.new +chmod 644 $PKG/etc/rc.d/rc.cups.new +# Clear out the additions: +rm -rf $PKG/etc/init.d $PKG/etc/rc{0,2,3,5}.d + +### OBSOLETE. The USB backend is patched to support usblp again. ### +## From 1.4.x, CUPS no longer uses usblp, and having the module loaded +## will interfere with USB printers. So, we will add a blacklist rule +## so that the module is not loaded: +#mkdir -p $PKG/etc/modprobe.d +#cat << EOF > $PKG/etc/modprobe.d/cups.blacklist.usblp.conf.new +## Do not load the kernel usblp module, since it interferes with +## versions of CUPS 1.4.0 and newer: +#blacklist usblp +#EOF + +# I'm not sure if overwriting this blindly could have ill effects, +# but it never hurts to play it safe. According to the dbus-daemon +# manpage, only files ending in .conf will be used, so there won't +# be any unintended doubling up. +mv $PKG/etc/dbus-1/system.d/cups.conf $PKG/etc/dbus-1/system.d/cups.conf.new + +# For full CUPS SMB support, you'll need to install the cups-samba +# package from the source in this directory. There's no easy way +# to add that to a package build, and the requests aren't pouring in, +# so you'll have to install it yourself. It's easy to do. + +# However, this will get you the most useful SMB support for free. +# Thanks to Boris Kurktchiev for the tip. :-) +( cd $PKG/usr/lib${LIBDIRSUFFIX}/cups/backend + if [ ! -e smb ]; then + ln -sf /usr/bin/smbspool smb + fi +) + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +# Remove preformatted manpages and move the manpages to /usr/man: +( cd $PKG/usr/share/man + find . -type d -name "cat*" | xargs rm -rf + cd .. + mv man .. +) + +# Adjust/expand docs: +( mkdir -p $PKG/usr/doc + mv $PKG/usr/share/doc/cups $PKG/usr/doc/cups-$VERSION + rmdir $PKG/usr/share/doc + cd $PKG/usr/doc + ln -sf cups-$VERSION cups ) + +# If there's a ChangeLog, installing at least part of the recent history +# is useful, but don't let it get totally out of control: +if [ -r CHANGES.txt ]; then + DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION) + cat CHANGES.txt | head -n 1000 > $DOCSDIR/CHANGES.txt + touch -r CHANGES.txt $DOCSDIR/CHANGES.txt +fi + +# I'm sorry, but PDF files are almost as bloated and annoying as +# MS Word documents. We'll retain the HTML files in /usr/doc. +( cd $PKG/usr/doc + find . -name "*.pdf" -exec rm -f {} \; ) + +# Apply no-clobber fix to conffiles: +( cd $PKG/etc/cups + for file in * ; do + if [ -f $file ]; then + mv $file $file.new + fi + done ) + +# Strip stuff: +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Use symlinks to certain binaries so that CUPS and LPRng can coexist: +SUFFIX=cups +for file in \ +usr/bin/cancel \ +usr/bin/lp \ +usr/bin/lpq \ +usr/bin/lpr \ +usr/bin/lprm \ +usr/bin/lpstat \ +usr/sbin/lpc ; do + ( cd $PKG + mv ${file} ${file}-${SUFFIX} + ( cd `dirname ${file}` ; ln -sf `basename ${file}`-${SUFFIX} `basename ${file}` ) + ) +done +# Now fix the associated man pages: +mv $PKG/usr/man/man1/cancel.1.gz $PKG/usr/man/man1/cancel-${SUFFIX}.1.gz +mv $PKG/usr/man/man1/lp.1.gz $PKG/usr/man/man1/lp-${SUFFIX}.1.gz +mv $PKG/usr/man/man1/lpq.1.gz $PKG/usr/man/man1/lpq-${SUFFIX}.1.gz +mv $PKG/usr/man/man1/lpr.1.gz $PKG/usr/man/man1/lpr-${SUFFIX}.1.gz +mv $PKG/usr/man/man1/lprm.1.gz $PKG/usr/man/man1/lprm-${SUFFIX}.1.gz +mv $PKG/usr/man/man1/lpstat.1.gz $PKG/usr/man/man1/lpstat-${SUFFIX}.1.gz +mv $PKG/usr/man/man8/lpc.8.gz $PKG/usr/man/man8/lpc-${SUFFIX}.8.gz +( cd $PKG/usr/man/man1 + ln -sf cancel-${SUFFIX}.1.gz cancel.1.gz + ln -sf lp-${SUFFIX}.1.gz lp.1.gz + ln -sf lpq-${SUFFIX}.1.gz lpq.1.gz + ln -sf lpr-${SUFFIX}.1.gz lpr.1.gz + ln -sf lprm-${SUFFIX}.1.gz lprm.1.gz + ln -sf lpstat-${SUFFIX}.1.gz lpstat.1.gz +) +( cd $PKG/usr/man/man8 + ln -sf lpc-${SUFFIX}.8.gz lpc.8.gz +) + +# Add the doinst.sh that installs the .new conffiles: +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +# Build the package: +cd $PKG +/sbin/makepkg -l y -c n $TMP/cups-$VERSION-$ARCH-$BUILD.txz + |