diff options
Diffstat (limited to 'slackware64-current/source/a/udev/config/modprobe.d')
4 files changed, 295 insertions, 0 deletions
diff --git a/slackware64-current/source/a/udev/config/modprobe.d/blacklist.conf.new b/slackware64-current/source/a/udev/config/modprobe.d/blacklist.conf.new new file mode 100644 index 000000000..25811703d --- /dev/null +++ b/slackware64-current/source/a/udev/config/modprobe.d/blacklist.conf.new @@ -0,0 +1,270 @@ +# +# Listing a module here prevents the hotplug scripts from loading it. +# Usually that'd be so that some other driver will bind it instead, +# no matter which driver happens to get probed first. Sometimes user +# mode tools can also control driver binding. + +# PC Speaker support: +# This one is loaded by /etc/rc.d/rc.modules. If you don't like +# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules. +blacklist pcspkr + +# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices +blacklist de4x5 + +# At least 2.4.3 and later xircom_tulip doesn't have that conflict +# xircom_tulip_cb +blacklist dmfe + +#evbug is a debug tool and should be loaded explicitly +blacklist evbug + +# Alternate Intel EtherExpress Pro/100 support driver. List it +# here so it won't conflict with an already-loaded e100 module. +blacklist eepro100 + +# Alternate 8139 driver. Some 8139 cards need this specific driver, +# though... +blacklist 8139cp + +# Deprecated BCM4318 driver. +blacklist bcm43xx + +# Modules used to run a wireless adaptor as an access point. These +# conflict with the normal driver for the device, and so should be +# loaded manually. +blacklist hostap_cs +blacklist hostap_pci +blacklist hostap_plx +blacklist hostap + +# Ethernet over IEEE1394 module. In too many cases this will load +# when there's no eth1394 device present (just an IEEE1394 port) +blacklist eth1394 + +# This module has also been known to cause crashes with some hardware. +blacklist hw_random + +# The kernel lists this as "experimental", but for now it's "broken" +blacklist via-ircc + +# ALSA modules to support sound modems. These should be loaded manually +# if needed. For most people they just break sound support... +blacklist snd-atiixp-modem +blacklist snd-intel8x0m +blacklist snd-via82xx-modem + +# OSS (Open Sound System) modules. This is the old and deprecated Linux +# sound system. If you want to use OSS, remove the alsa-driver package +# and cut out (or comment out) this list. With these modules +# blacklisted ALSA will load by default. +blacklist ac97 +blacklist ac97_codec +blacklist aci +blacklist ad1816 +blacklist ad1848 +blacklist ad1889 +blacklist adlib_card +blacklist aedsp16 +blacklist ali5455 +blacklist awe_wave +blacklist btaudio +blacklist cmpci +blacklist cs4232 +blacklist cs4281 +blacklist cs46xx +blacklist emu10k1 +blacklist es1370 +blacklist es1371 +blacklist esssolo1 +blacklist forte +blacklist gus +blacklist i810_audio +blacklist kahlua +blacklist mad16 +blacklist maestro +blacklist maestro3 +blacklist maui +blacklist mpu401 +blacklist msnd +blacklist msnd_classic +blacklist msnd_pinnacle +blacklist nm256_audio +blacklist opl3 +blacklist opl3sa +blacklist opl3sa2 +blacklist pas2 +blacklist pss +blacklist rme96xx +blacklist sb +blacklist sb_lib +blacklist sgalaxy +blacklist sonicvibes +blacklist sound +blacklist sscape +blacklist trident +blacklist trix +blacklist uart401 +blacklist uart6850 +blacklist v_midi +blacklist via82cxxx_audio +blacklist wavefront +blacklist ymfpci + +# Hardware specific video framebuffer modules. If the user wants +# these, they can load them manually or de-blacklist them. Having +# them load automatically may lead to funny side effects with +# certain revisions of video hardware. +blacklist arcfb +blacklist aty128fb +blacklist atyfb +blacklist cirrusfb +blacklist clgenfb +blacklist cyber2000fb +blacklist fbcon-cfb2 +blacklist fbcon-cfb4 +blacklist fbcon-hga +blacklist fbcon-mfb +blacklist fbcon-vga-planes +blacklist fbgen +blacklist hgafb +blacklist i2c-matroxfb +blacklist i810fb +blacklist intelfb +blacklist kyrofb +blacklist matroxfb_DAC1064 +blacklist matroxfb_Ti3026 +blacklist matroxfb_accel +blacklist matroxfb_base +blacklist matroxfb_crtc2 +blacklist matroxfb_g450 +blacklist matroxfb_maven +blacklist matroxfb_misc +blacklist neofb +blacklist nvidiafb +blacklist pm2fb +blacklist pm3fb +blacklist radeonfb +blacklist rivafb +blacklist savagefb +blacklist sisfb +blacklist sstfb +blacklist tdfxfb +blacklist tridentfb +blacklist vga16fb + +# SCSI and SATA controller modules. Typically these are either +# built into the kernel or loaded with an initrd already. +blacklist 3w-xxxx +blacklist 53c7,8xx +blacklist AM53C974 +blacklist BusLogic +blacklist NCR53c406a +blacklist a100u2w +blacklist advansys +blacklist aha152x +blacklist aha1542 +blacklist aha1740 +blacklist aic79xx +blacklist aic7xxx +blacklist aic7xxx_old +blacklist aic94xx +blacklist ata_piix +blacklist atp870u +blacklist cpqfc +blacklist dc395x +blacklist dmx3191d +blacklist dpt_i2o +blacklist dtc +blacklist eata +blacklist eata_dma +blacklist eata_pio +blacklist fdomain +blacklist g_NCR5380 +blacklist g_NCR5380_mmio +blacklist gdth +blacklist ide-scsi +blacklist imm +blacklist in2000 +blacklist initio +blacklist ipr +blacklist ips +blacklist libata +blacklist megaraid +blacklist ncr53c8xx +blacklist nsp32 +blacklist osst +blacklist pas16 +blacklist pci2000 +blacklist pci2220i +blacklist ppa +blacklist psi240i +blacklist qla1280 +blacklist qla2100 +blacklist qla2200 +blacklist qla2300 +blacklist qla2322 +blacklist qla2xxx +blacklist qla6312 +blacklist qla6322 +blacklist qlogicfas +blacklist qlogicfas408 +blacklist qlogicfc +blacklist qlogicisp +blacklist seagate +blacklist sim710 +blacklist sata_promise +blacklist sata_sil +blacklist sata_sis +blacklist sata_svw +blacklist sata_sx4 +blacklist sata_via +blacklist sata_vsc +blacklist scsi_debug +blacklist scsi_transport_fc +blacklist scsi_transport_spi +blacklist sym53c416 +blacklist sym53c8xx +blacklist sym53c8xx +blacklist t128 +blacklist tmscsim +blacklist u14-34f + +# Blacklist all watchdog modules. Many motherboards hangs with them and, +# if you really need an watchdog you probably know how to load the module +blacklist acquirewdt +blacklist advantechwdt +blacklist alim1535_wdt +blacklist alim7101_wdt +blacklist cpu5wdt +blacklist eurotechwdt +blacklist hpwdt +blacklist i6300esb +blacklist iTCO_vendor_support +blacklist iTCO_wdt +blacklist ib700wdt +blacklist ibmasr +blacklist it8712f_wdt +blacklist machzwd +blacklist mixcomwd +blacklist pc87413_wdt +blacklist pcwd +blacklist pcwd_pci +blacklist pcwd_usb +blacklist sbc60xxwdt +blacklist sbc7240_wdt +blacklist sbc8360 +blacklist sbc_epx_c3 +blacklist sc1200wdt +blacklist sc520_wdt +blacklist scx200_wdt +blacklist smsc37b787_wdt +blacklist softdog +blacklist w83627hf_wdt +blacklist w83697hf_wdt +blacklist w83877f_wdt +blacklist w83977f_wdt +blacklist wafer5823wdt +blacklist wdt +blacklist wdt_pci + diff --git a/slackware64-current/source/a/udev/config/modprobe.d/isapnp.conf.new b/slackware64-current/source/a/udev/config/modprobe.d/isapnp.conf.new new file mode 100644 index 000000000..2ed9305ee --- /dev/null +++ b/slackware64-current/source/a/udev/config/modprobe.d/isapnp.conf.new @@ -0,0 +1,15 @@ +# These aliases are here because many PnP modules do not +# provide aliases for them. +alias pnp:dPNP0400 parport_pc +alias pnp:dPNP0401 parport_pc +alias pnp:dPNP0510 irtty-sir +alias pnp:dPNP0511 irtty-sir +alias pnp:dPNP0700 floppy +alias pnp:dPNP0B00 rtc +alias acpi:PNP0B00: rtc-cmos +alias acpi:PNP0B01: rtc-cmos +alias acpi:PNP0B02: rtc-cmos +alias pnp:dPNPB02F analog +alias pnp:dPNP0F13 psmouse +alias pnp:dPNP0800 pcspkr +alias pnp:dPNP0303 atkbd diff --git a/slackware64-current/source/a/udev/config/modprobe.d/psmouse.conf.new b/slackware64-current/source/a/udev/config/modprobe.d/psmouse.conf.new new file mode 100644 index 000000000..70c0d8195 --- /dev/null +++ b/slackware64-current/source/a/udev/config/modprobe.d/psmouse.conf.new @@ -0,0 +1,6 @@ +# PS/2 mouse support: +# The default options when the psmouse module can cause problems with KVM +# switches. If you experience this, you may want to uncomment the line +# below to use a more basic mouse protocol with the psmouse module: +#options psmouse proto=imps + diff --git a/slackware64-current/source/a/udev/config/modprobe.d/usb-controller.conf.new b/slackware64-current/source/a/udev/config/modprobe.d/usb-controller.conf.new new file mode 100644 index 000000000..4b77fd825 --- /dev/null +++ b/slackware64-current/source/a/udev/config/modprobe.d/usb-controller.conf.new @@ -0,0 +1,4 @@ +# Make sure that ehci-hcd is always loaded before uhci-hci +# # or ohci-hcd to prevent a kernel warning: +install uhci-hcd /sbin/modprobe ehci-hcd ; /sbin/modprobe -i uhci-hcd +install ohci-hcd /sbin/modprobe ehci-hcd ; /sbin/modprobe -i ohci-hcd |