diff options
Diffstat (limited to 'slackware64-current/source/n/network-scripts/scripts/rc.inet2')
| -rw-r--r-- | slackware64-current/source/n/network-scripts/scripts/rc.inet2 | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/slackware64-current/source/n/network-scripts/scripts/rc.inet2 b/slackware64-current/source/n/network-scripts/scripts/rc.inet2 new file mode 100644 index 000000000..232d93ecb --- /dev/null +++ b/slackware64-current/source/n/network-scripts/scripts/rc.inet2 @@ -0,0 +1,137 @@ +#!/bin/sh +# +# rc.inet2 This shell script boots up the entire network system. +# Note, that when this script is used to also fire +# up any important remote NFS disks (like the /usr +# directory), care must be taken to actually +# have all the needed binaries online _now_ ... +# +# Uncomment or comment out sections depending on which +# services your site requires. +# +# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> +# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com> + + +# At this point, we are ready to talk to The World... + + +# Mount remote (NFS) filesystems: +if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then + # Start rpc.portmap, /sbin/rpc.lockd, and /sbin/rpc.statd if we find NFS + # volumes defined in /etc/fstab since these will need to be running in order + # to mount them. If they are not running, attempting to mount an NFS + # partition will cause mount to hang, or at least result in unreliable + # operation. Keep this in mind if you plan to mount unlisted NFS + # partitions... + # If you have uncommented NFS partitions in your /etc/fstab, rc.rpc is run + # whether it is set as executable or not. If you don't want to run it, + # comment the NFS partitions out in /etc/fstab or erase/rename rc.rpc. + if [ -r /etc/rc.d/rc.rpc ]; then + sh /etc/rc.d/rc.rpc start + fi + echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs" + /sbin/mount -a -t nfs # This may be our /usr runtime! + # Show the mounted volumes: + /sbin/mount -v -t nfs +fi + +# If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd, +# and rpc.statd. This might be needed to mount NFS partitions that are not +# listed in /etc/fstab. Starting this twice won't hurt as the script will +# check if things are already running before trying to start them. +if [ -x /etc/rc.d/rc.rpc ]; then + sh /etc/rc.d/rc.rpc start +fi + +# Mount remote CIFS filesystems. Note that where possible, using CIFS is +# preferred over SMBFS. SMBFS is no longer actively maintained. +if cat /etc/fstab | grep -v '^#' | grep -w cifs 1> /dev/null 2> /dev/null ; then + echo "Mounting remote CIFS file systems: /sbin/mount -a -t cifs" + /sbin/mount -a -t cifs + # Show the mounted volumes: + /sbin/mount -v -t cifs +fi + +# Mount remote SMB filesystems: +if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then + echo "Mounting remote SMBFS file systems: /sbin/mount -a -t smbfs" + /sbin/mount -a -t smbfs + # Show the mounted volumes: + /sbin/mount -v -t smbfs +fi + +# Start the system logger if it is not already running (maybe because /usr +# is on a network partition). +if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then + . /etc/rc.d/rc.syslog start +fi + +# If there is a firewall script, run it before enabling packet forwarding. +# See the HOWTOs on http://www.netfilter.org/ for documentation on +# setting up a firewall or NAT on Linux. In some cases this might need to +# be moved past the section below dealing with IP packet forwarding. +if [ -x /etc/rc.d/rc.firewall ]; then + /etc/rc.d/rc.firewall start +fi + +# Turn on IPv4 packet forwarding support. +if [ -x /etc/rc.d/rc.ip_forward ]; then + . /etc/rc.d/rc.ip_forward start +fi + +# Start the inetd server: +if [ -x /etc/rc.d/rc.inetd ]; then + /etc/rc.d/rc.inetd start +fi + +# Start the OpenSSH SSH daemon: +if [ -x /etc/rc.d/rc.sshd ]; then + echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd" + /etc/rc.d/rc.sshd start +fi + +# Start the BIND name server daemon: +if [ -x /etc/rc.d/rc.bind ]; then + /etc/rc.d/rc.bind start +fi + +# Start NIS (the Network Information Service): +if [ -x /etc/rc.d/rc.yp ]; then + . /etc/rc.d/rc.yp start +fi + +# Start the NFS server. Note that for this to work correctly, you'll +# need nfsd support in the kernel (the startup script will try to load +# the module for you). +# You'll also need to set up some shares in /etc/exports. +# Starting the NFS server: +if [ -x /etc/rc.d/rc.nfsd ]; then + /etc/rc.d/rc.nfsd start +fi + +# Stuff you won't need follows. ;-) + +# # Start the network routing daemon: +# if [ -x /usr/sbin/routed ]; then +# echo "Starting network routing daemon: /usr/sbin/routed" +# /usr/sbin/routed -g -s +# fi + +# # Start the system status server: +# if [ -x /usr/sbin/rwhod ]; then +# echo "Starting system status server: /usr/sbin/rwhod" +# /usr/sbin/rwhod +# fi + +# # Fire up the PC-NFS daemon(s). This is a primarily obsolete system, and may +# # not be very secure. It's not at all needed for normal NFS server support. +# # You probably should not run this. +# if [ -x /usr/sbin/rpc.pcnfsd ]; then +# echo "Starting PC-NFS daemons: /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd" +# /usr/sbin/rpc.pcnfsd /var/spool/lpd +# fi +# if [ -x /usr/sbin/rpc.bwnfsd ]; then +# /usr/sbin/rpc.bwnfsd /var/spool/lpd +# fi + |