Merge HEAD from ../from-linus

70 files changed, 196 insertions, 178 deletions

diff --git a/Makefile b/Makefile
index 2c1486159d8..300f61f6f6a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc6
+EXTRAVERSION =-rc7
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 083c5df42d3..189d5eababa 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -522,7 +522,7 @@ source "mm/Kconfig"
 
 config NUMA
 	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM
+	depends on DISCONTIGMEM && BROKEN
 	help
 	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
 	  Access).  This option is for configuring high-end multiprocessor
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 8f1e78551b1..e211aa7404e 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -1036,7 +1036,7 @@ debug_spin_lock(spinlock_t * lock, const char *base_file, int line_no)
 	"	br	1b\n"
 	".previous"
 	: "=r" (tmp), "=m" (lock->lock), "=r" (stuck)
-	: "1" (lock->lock), "2" (stuck) : "memory");
+	: "m" (lock->lock), "2" (stuck) : "memory");
 
 	if (stuck < 0) {
 		printk(KERN_WARNING
@@ -1115,7 +1115,7 @@ void _raw_write_lock(rwlock_t * lock)
 	".previous"
 	: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy),
 	  "=&r" (stuck_lock), "=&r" (stuck_reader)
-	: "0" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
+	: "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
 
 	if (stuck_lock < 0) {
 		printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc);
@@ -1153,7 +1153,7 @@ void _raw_read_lock(rwlock_t * lock)
 	"	br	1b\n"
 	".previous"
 	: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock)
-	: "0" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
+	: "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
 
 	if (stuck_lock < 0) {
 		printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc);
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index 908eb4af8de..ba788cfdc3c 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -65,7 +65,7 @@ op_axp_setup(void)
 	model->reg_setup(&reg, ctr, &sys);
 
 	/* Configure the registers on all cpus.  */
-	smp_call_function(model->cpu_setup, &reg, 0, 1);
+	(void)smp_call_function(model->cpu_setup, &reg, 0, 1);
 	model->cpu_setup(&reg);
 	return 0;
 }
@@ -86,7 +86,7 @@ op_axp_cpu_start(void *dummy)
 static int
 op_axp_start(void)
 {
-	smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
 	op_axp_cpu_start(NULL);
 	return 0;
 }
@@ -101,7 +101,7 @@ op_axp_cpu_stop(void *dummy)
 static void
 op_axp_stop(void)
 {
-	smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
 	op_axp_cpu_stop(NULL);
 }
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7bc4a583f4e..c65c6eb9810 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -310,7 +310,7 @@ menu "Kernel Features"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL #&& n
+	depends on EXPERIMENTAL && BROKEN #&& n
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d571c37ac30..4554c961251 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -617,7 +617,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	notify_die("unknown data abort code", regs, &info, instr, 0);
 }
 
-volatile void __bug(const char *file, int line, void *data)
+void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
 {
 	printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
 	if (data)
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 8035f4faafb..1777e92a88e 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -370,20 +370,20 @@ TABLE 5
 #define getRoundingMode(opcode)		((opcode & MASK_ROUNDING_MODE) >> 5)
 
 #ifdef CONFIG_FPE_NWFPE_XP
-static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
+static inline __attribute_pure__ floatx80 getExtendedConstant(const unsigned int nIndex)
 {
 	extern const floatx80 floatx80Constant[];
 	return floatx80Constant[nIndex];
 }
 #endif
 
-static inline const float64 getDoubleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float64 getDoubleConstant(const unsigned int nIndex)
 {
 	extern const float64 float64Constant[];
 	return float64Constant[nIndex];
 }
 
-static inline const float32 getSingleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float32 getSingleConstant(const unsigned int nIndex)
 {
 	extern const float32 float32Constant[];
 	return float32Constant[nIndex];
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index a61f33d06ea..cd2d5d5514f 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -803,15 +803,17 @@ void math_error(void __user *eip)
 	 */
 	cwd = get_fpu_cwd(task);
 	swd = get_fpu_swd(task);
-	switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+	switch (swd & ~cwd & 0x3f) {
 		case 0x000:
 		default:
 			break;
 		case 0x001: /* Invalid Op */
-		case 0x041: /* Stack Fault */
-		case 0x241: /* Stack Fault | Direction */
+			/*
+			 * swd & 0x240 == 0x040: Stack Underflow
+			 * swd & 0x240 == 0x240: Stack Overflow
+			 * User must clear the SF bit (0x40) if set
+			 */
 			info.si_code = FPE_FLTINV;
-			/* Should we clear the SF or let user space do it ???? */
 			break;
 		case 0x002: /* Denormalize */
 		case 0x010: /* Underflow */
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 54d9ed444e4..f9472c50ab4 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -380,6 +380,7 @@ void pcibios_bus_to_resource(struct pci_dev *dev,
 	res->start = region->start + offset;
 	res->end = region->end + offset;
 }
+EXPORT_SYMBOL(pcibios_bus_to_resource);
 
 static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
 {
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 7772951df31..7622d4ec5f0 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -269,7 +269,7 @@ config NR_CPUS
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation Support"
-	depends on SMP
+	depends on SMP && BROKEN
 	default n
 
 # turning this on wastes a bunch of space.
@@ -286,6 +286,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	default n
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug
index 31039723804..bbf711bab69 100644
--- a/arch/m32r/Kconfig.debug
+++ b/arch/m32r/Kconfig.debug
@@ -20,7 +20,7 @@ config DEBUG_STACK_USAGE
 
 config DEBUG_PAGEALLOC
 	bool "Page alloc debugging"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && BROKEN
 	help
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c
index a146b24a556..708634b685e 100644
--- a/arch/m32r/kernel/setup_m32700ut.c
+++ b/arch/m32r/kernel/setup_m32700ut.c
@@ -30,9 +30,11 @@
 typedef struct {
 	unsigned long icucr;  /* ICU Control Register */
 } icu_data_t;
+static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
 #endif /* CONFIG_SMP */
 
-static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
 
 static void disable_m32700ut_irq(unsigned int irq)
 {
diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c
index f0301f58bcc..d7b7ec6d30f 100644
--- a/arch/m32r/kernel/setup_opsput.c
+++ b/arch/m32r/kernel/setup_opsput.c
@@ -31,9 +31,11 @@
 typedef struct {
 	unsigned long icucr;  /* ICU Control Register */
 } icu_data_t;
+static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
 #endif /* CONFIG_SMP */
 
-static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
 
 static void disable_opsput_irq(unsigned int irq)
 {
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index f9a0e723478..640d592ea07 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -91,6 +91,7 @@ extern struct {
 
 /* which physical physical ID maps to which logical CPU number */
 static volatile int physid_2_cpu[NR_CPUS];
+#define physid_to_cpu(physid)	physid_2_cpu[physid]
 
 /* which logical CPU number maps to which physical ID */
 volatile int cpu_2_physid[NR_CPUS];
diff --git a/arch/m32r/lib/csum_partial_copy.c b/arch/m32r/lib/csum_partial_copy.c
index c871b4606b0..ddb16a83a8c 100644
--- a/arch/m32r/lib/csum_partial_copy.c
+++ b/arch/m32r/lib/csum_partial_copy.c
@@ -58,3 +58,4 @@ csum_partial_copy_from_user (const unsigned char __user *src,
 	return csum_partial(dst, len-missing, sum);
 }
 EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 1d1a01e54b3..08e72795555 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -12,12 +12,14 @@
 #include <linux/mmzone.h>
 #include <linux/initrd.h>
 #include <linux/nodemask.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 
 extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
 static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index f6db3b385fe..e6fa1d1cc03 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -911,6 +911,7 @@ config PPCBUG_NVRAM
 	default y if PPC_PREP
 
 config SMP
+	depends on PPC_STD_MMU
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
@@ -930,7 +931,7 @@ config SMP
 
 config IRQ_ALL_CPUS
 	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP
+	depends on SMP && !MV64360
 	help
 	  This option gives the kernel permission to distribute IRQs across
 	  multiple CPUs.  Saying N here will route all IRQs to the first
@@ -1121,7 +1122,9 @@ config PROC_HARDWARE
 
 source "drivers/zorro/Kconfig"
 
+if !44x || BROKEN
 source kernel/power/Kconfig
+endif
 
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index f7c045764e0..805dd98908a 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -3,6 +3,11 @@ config 4xx
 	depends on 40x || 44x
 	default y
 
+config WANT_EARLY_SERIAL
+	bool
+	select SERIAL_8250
+	default n
+
 menu "IBM 4xx options"
 	depends on 4xx
 
@@ -18,6 +23,7 @@ config ASH
 
 config BUBINGA
 	bool "Bubinga"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM 405EP evaluation board.
 
@@ -70,21 +76,25 @@ choice
 
 config BAMBOO
 	bool "Bamboo"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440EP evaluation board.
 
 config EBONY
 	bool "Ebony"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440GP evaluation board.
 
 config LUAN
 	bool "Luan"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440SP evaluation board.
 
 config OCOTEA
 	bool "Ocotea"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440GX evaluation board.
 
@@ -230,10 +240,6 @@ config PPC_GEN550
 	depends on 4xx
 	default y
 
-config PM
-	bool "Power Management support (EXPERIMENTAL)"
-	depends on 4xx && EXPERIMENTAL
-
 choice
 	prompt "TTYS0 device and default console"
 	depends on 40x
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 687e8559520..e9c24d2dbd9 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -706,6 +706,8 @@ void machine_power_off(void)
 	local_irq_disable();
 	while (1) ;
 }
+/* Used by the G5 thermal driver */
+EXPORT_SYMBOL_GPL(machine_power_off);
 
 void machine_halt(void)
 {
diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c
index 20062145e84..d47fecb42cc 100644
--- a/arch/s390/kernel/cpcmd.c
+++ b/arch/s390/kernel/cpcmd.c
@@ -46,9 +46,9 @@ int  __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
 				"lra	3,0(%4)\n"
 				"lr	5,%5\n"
 				"diag	2,4,0x8\n"
-				"brc	8, .Litfits\n"
+				"brc	8, 1f\n"
 				"ar	5, %5\n"
-				".Litfits: \n"
+				"1: \n"
 				"lr	%0,4\n"
 				"lr	%1,5\n"
 				: "=d" (return_code), "=d" (return_len)
@@ -64,9 +64,9 @@ int  __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
 				"sam31\n"
 				"diag	2,4,0x8\n"
 				"sam64\n"
-				"brc	8, .Litfits\n"
+				"brc	8, 1f\n"
 				"agr	5, %5\n"
-				".Litfits: \n"
+				"1: \n"
 				"lgr	%0,4\n"
 				"lgr	%1,5\n"
 				: "=d" (return_code), "=d" (return_len)
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index bba140d98b1..f21c993f885 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -540,6 +540,7 @@ void pcibios_bus_to_resource(struct pci_dev *pdev, struct resource *res,
 
 	pbm->parent->resource_adjust(pdev, res, root);
 }
+EXPORT_SYMBOL(pcibios_bus_to_resource);
 
 char * __init pcibios_setup(char *str)
 {
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index b95c6cf2659..bf57e2362bf 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Fri Jul 22 16:47:31 2005
+# Linux kernel version: 2.6.13-rc6-git3
+# Fri Aug 12 16:40:34 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -280,10 +280,6 @@ CONFIG_IPV6=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -459,6 +455,7 @@ CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=y
 # CONFIG_SCSI_SATA_NV is not set
@@ -488,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -508,9 +506,11 @@ CONFIG_BLK_DEV_DM=y
 #
 # Fusion MPT device support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
 # CONFIG_FUSION_FC is not set
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -581,6 +581,7 @@ CONFIG_8139TOO=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -620,6 +621,10 @@ CONFIG_S2IO=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86_64/pci/k8-bus.c
index c2c38b57993..d80c323669e 100644
--- a/arch/x86_64/pci/k8-bus.c
+++ b/arch/x86_64/pci/k8-bus.c
@@ -47,13 +47,22 @@ fill_mp_bus_to_cpumask(void)
 			 * if there are no busses hanging off of the current
 			 * ldt link then both the secondary and subordinate
 			 * bus number fields are set to 0.
+			 * 
+			 * RED-PEN
+			 * This is slightly broken because it assumes
+ 			 * HT node IDs == Linux node ids, which is not always
+			 * true. However it is probably mostly true.
 			 */
 			if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
 				&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
 				for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
 				     j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
-				     j++)
-					pci_bus_to_node[j] = NODE_ID(nid);
+				     j++) { 
+					int node = NODE_ID(nid);
+					if (!node_online(node))
+						node = 0;
+					pci_bus_to_node[j] = node;
+				}		
 			}
 		}
 	}
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index 2435a7c99b2..cd056e7e64e 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -47,7 +47,7 @@ static int cfq_slice_idle = HZ / 100;
 /*
  * disable queueing at the driver/hardware level
  */
-static int cfq_max_depth = 1;
+static int cfq_max_depth = 2;
 
 /*
  * for the hash of cfqq inside the cfqd
@@ -385,9 +385,15 @@ cfq_choose_req(struct cfq_data *cfqd, struct cfq_rq *crq1, struct cfq_rq *crq2)
 		return crq2;
 	if (crq2 == NULL)
 		return crq1;
-	if (cfq_crq_requeued(crq1))
+
+	if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2))
 		return crq1;
-	if (cfq_crq_requeued(crq2))
+	else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1))
+		return crq2;
+
+	if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2))
+		return crq1;
+	else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1))
 		return crq2;
 
 	s1 = crq1->request->sector;
@@ -1769,18 +1775,23 @@ static void
 cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		 struct cfq_rq *crq)
 {
-	const int sync = cfq_crq_is_sync(crq);
+	struct cfq_io_context *cic;
 
 	cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);
 
-	if (sync) {
-		struct cfq_io_context *cic = crq->io_context;
+	/*
+	 * we never wait for an async request and we don't allow preemption
+	 * of an async request. so just return early
+	 */
+	if (!cfq_crq_is_sync(crq))
+		return;
 
-		cfq_update_io_thinktime(cfqd, cic);
-		cfq_update_idle_window(cfqd, cfqq, cic);
+	cic = crq->io_context;
 
-		cic->last_queue = jiffies;
-	}
+	cfq_update_io_thinktime(cfqd, cic);
+	cfq_update_idle_window(cfqd, cfqq, cic);
+
+	cic->last_queue = jiffies;
 
 	if (cfqq == cfqd->active_queue) {
 		/*
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4f27e551929..7333b41d422 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD
 
 config COMPUTONE
 	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32)
 	---help---
 	  This driver supports the entire family of Intelliport II/Plus
 	  controllers with the exception of the MicroChannel controllers and
@@ -138,7 +138,7 @@ config CYZ_INTR
 
 config DIGIEPCA
 	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
 	---help---
 	  This is a driver for Digi International's Xx, Xeve, and Xem series
 	  of cards which provide multiple serial ports. You would need
@@ -208,7 +208,7 @@ config SYNCLINK
 
 config SYNCLINKMP
 	tristate "SyncLink Multiport support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
 	help
 	  Enable support for the SyncLink Multiport (2 or 4 ports)
 	  serial adapter, running asynchronous and HDLC communications up
@@ -735,7 +735,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !PPC64
+	depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 79c8e2dd9c3..32cdfb30e9b 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -1,6 +1,7 @@
 menu "InfiniBand support"
 
 config INFINIBAND
+	depends on PCI || BROKEN
 	tristate "InfiniBand support"
 	---help---
 	  Core support for InfiniBand (IB).  Make sure to also select
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6c7b8bffc6f..801c98f30e5 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -134,6 +134,7 @@ config HISAX_AVM_A1
 
 config HISAX_FRITZPCI
 	bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+	depends on BROKEN || !PPC64
 	help
 	  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 65ab64c43b3..bc3e096d84f 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -103,7 +103,7 @@ config PMAC_MEDIABAY
 # on non-powerbook machines (but only on PMU based ones AFAIK)
 config PMAC_BACKLIGHT
 	bool "Backlight control for LCD screens"
-	depends on ADB_PMU
+	depends on ADB_PMU && (BROKEN || !PPC64)
 	help
 	  Say Y here to build in code to manage the LCD backlight on a
 	  Macintosh PowerBook.  With this code, the backlight will be turned
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac81e5e01a9..3f574239609 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -356,7 +356,7 @@ config VIDEO_M32R_AR
 
 config VIDEO_M32R_AR_M64278
 	tristate "Use Colour AR module M64278(VGA)"
-	depends on VIDEO_M32R_AR
+	depends on VIDEO_M32R_AR && PLAT_M32700UT
 	---help---
 	  Say Y here to use the Renesas M64278E-800 camera module,
 	  which supports VGA(640x480 pixcels) size of images.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8a835eb5880..8edb6936fb9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1145,7 +1145,7 @@ config IBMVETH
 	  be called ibmveth.
 
 config IBM_EMAC
-	tristate "IBM PPC4xx EMAC driver support"
+	bool "IBM PPC4xx EMAC driver support"
 	depends on 4xx
 	select CRC32
 	---help---
@@ -1154,7 +1154,7 @@ config IBM_EMAC
 
 config IBM_EMAC_ERRMSG
 	bool "Verbose error messages"
-	depends on IBM_EMAC
+	depends on IBM_EMAC && BROKEN
 
 config IBM_EMAC_RXB
 	int "Number of receive buffers"
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 6482d994d48..c7fb3675c09 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1712,11 +1712,10 @@ struct mal_commac_ops emac_commac_ops = {
 };
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-static int emac_netpoll(struct net_device *ndev)
+static void emac_netpoll(struct net_device *ndev)
 {
 	emac_rxeob_dev((void *)ndev, 0);
 	emac_txeob_dev((void *)ndev, 0);
-	return 0;
 }
 #endif
 
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 23d0fa4bbce..7e99e9f8045 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@ config 3C359
 
 config TMS380TR
 	tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-	depends on TR && (PCI || ISA)
+	depends on TR && (PCI || ISA && ISA_DMA_API)
 	select FW_LOADER
 	---help---
 	  This driver provides generic support for token ring adapters
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 1d3231cc471..ec3f75a030d 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -270,7 +270,7 @@ config PCMCIA_HERMES
 
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on NET_RADIO && PCMCIA
+	depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
 	  802.11 wireless cards.  This driver is the same as the Aironet
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 16a2e6ae37f..725a14119f2 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -34,7 +34,7 @@ config PARPORT
 
 config PARPORT_PC
 	tristate "PC-style hardware"
-	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32
+	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
 	  IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 6f9fdb27640..599b116d974 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -41,6 +41,7 @@ module_param(io_speed, int, 0444);
 
 
 #ifdef CONFIG_PCMCIA_PROBE
+#include <asm/irq.h>
 /* mask of IRQs already reserved by other cards, we should avoid using them */
 static u8 pcmcia_used_irq[NR_IRQS];
 #endif
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index d36258d6665..533f90c05cd 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -230,7 +230,7 @@ qdio_siga_input(struct qdio_q *q)
 }
 
 /* locked by the locks in qdio_activate and qdio_cleanup */
-static __u32 * volatile 
+static __u32 volatile *
 qdio_get_indicator(void)
 {
 	int i;
diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h
index 82a1d97001d..0a3bb5a10dd 100644
--- a/drivers/s390/crypto/z90crypt.h
+++ b/drivers/s390/crypto/z90crypt.h
@@ -36,15 +36,6 @@
 #define z90crypt_VARIANT 2	// 2 = added PCIXCC MCL3 and CEX2C support
 
 /**
- * If we are not using the sparse checker, __user has no use.
- */
-#ifdef __CHECKER__
-# define __user		__attribute__((noderef, address_space(1)))
-#else
-# define __user
-#endif
-
-/**
  * struct ica_rsa_modexpo
  *
  * Requirements:
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f1e8c4223ed..12c208fb18c 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1696,7 +1696,7 @@ config TT_DMA_EMUL
 
 config MAC_SCSI
 	bool "Macintosh NCR5380 SCSI"
-	depends on MAC && SCSI
+	depends on MAC && SCSI=y
 	help
 	  This is the NCR 5380 SCSI controller included on most of the 68030
 	  based Macintoshes.  If you have one of these say Y and read the
@@ -1717,7 +1717,7 @@ config SCSI_MAC_ESP
 
 config MVME147_SCSI
 	bool "WD33C93 SCSI driver for MVME147"
-	depends on MVME147 && SCSI
+	depends on MVME147 && SCSI=y
 	help
 	  Support for the on-board SCSI controller on the Motorola MVME147
 	  single-board computer.
@@ -1758,7 +1758,7 @@ config SUN3_SCSI
 
 config SUN3X_ESP
 	bool "Sun3x ESP SCSI"
-	depends on SUN3X && SCSI
+	depends on SUN3X && SCSI=y
 	help
 	  The ESP was an on-board SCSI controller used on Sun 3/80
 	  machines.  Say Y here to compile in support for it.
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index c5623694d10..e3b9692b968 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -1105,6 +1105,7 @@ MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("AHCI SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
 
 module_init(ahci_init);
 module_exit(ahci_exit);
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 54b32868aaf..13f23043c8a 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
 #
 config SCSI_ACORNSCSI_3
 	tristate "Acorn SCSI card (aka30) support"
-	depends on ARCH_ACORN && SCSI
+	depends on ARCH_ACORN && SCSI && BROKEN
 	help
 	  This enables support for the Acorn SCSI card (aka30). If you have an
 	  Acorn system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index a2cfade2c1c..d96ebf9d222 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -32,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"1.03"
+#define DRV_VERSION	"1.04"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 73b1f72b7e4..f4e7dcb6492 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2268,19 +2268,6 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
  *	spin_lock_irqsave(host_set lock)
  */
 
-
-
-/**
- *	ata_sg_init_one - Prepare a one-entry scatter-gather list.
- *	@qc:  Queued command
- *	@buf:  transfer buffer
- *	@buflen:  length of buf
- *
- *	Builds a single-entry scatter-gather list to initiate a
- *	transfer utilizing the specified buffer.
- *
- *	LOCKING:
- */
 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 {
 	struct scatterlist *sg;
@@ -2312,18 +2299,6 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
  *	spin_lock_irqsave(host_set lock)
  */
 
-
-/**
- *	ata_sg_init - Assign a scatter gather list to a queued command
- *	@qc:  Queued command
- *	@sg:  Scatter-gather list
- *	@n_elem:  length of sg list
- *
- *	Attaches a scatter-gather list to a queued command.
- *
- *	LOCKING:
- */
-
 void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 		 unsigned int n_elem)
 {
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index d90430bbb0d..3e7f4843020 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -26,7 +26,7 @@
 #define __LIBATA_H__
 
 #define DRV_NAME	"libata"
-#define DRV_VERSION	"1.11"	/* must be exactly four chars */
+#define DRV_VERSION	"1.12"	/* must be exactly four chars */
 
 struct ata_scsi_args {
 	u16			*id;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 5c1d4411457..919fb314ad1 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -40,7 +40,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"1.01"
+#define DRV_VERSION	"1.02"
 
 
 enum {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 56de409f486..b87122a0848 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -211,7 +211,7 @@ comment "Non-8250 serial port support"
 
 config SERIAL_AMBA_PL010
 	tristate "ARM AMBA PL010 serial port support"
-	depends on ARM_AMBA
+	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
 	select SERIAL_CORE
 	help
 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
@@ -819,7 +819,7 @@ config SERIAL_M32R_SIO_CONSOLE
 
 config SERIAL_M32R_PLDSIO
 	bool "M32R SIO I/F on a PLD"
-	depends on SERIAL_M32R_SIO=y
+	depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT)
 	default n
 	help
 	  Say Y here if you want to use the M32R serial controller
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 0301feacbde..9b50560b9d1 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1123,7 +1123,7 @@ static int __init m32r_sio_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver m32r_sio_reg;
+static struct uart_driver m32r_sio_reg;
 static struct console m32r_sio_console = {
 	.name		= "ttyS",
 	.write		= m32r_sio_console_write,
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 576f3b852fc..4528a00c45b 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1922,7 +1922,7 @@ static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
 
 			// copy the packet data to the new skb
 			memcpy(skb_put(gl_skb, size), packet->packet_data, size);
-			skb_return (dev, skb);
+			skb_return (dev, gl_skb);
 		}
 
 		// advance to the next packet
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index cbff98337aa..5fe182d6e4a 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@ menu "Console display driver support"
 
 config VGA_CONSOLE
 	bool "VGA text console" if EMBEDDED || !X86
-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC
+	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
index c08ce970ff8..bdb4d66418f 100644
--- a/include/asm-alpha/system.h
+++ b/include/asm-alpha/system.h
@@ -443,22 +443,19 @@ __xchg_u64(volatile long *m, unsigned long val)
    if something tries to do an invalid xchg().  */
 extern void __xchg_called_with_bad_pointer(void);
 
-static inline unsigned long
-__xchg(volatile void *ptr, unsigned long x, int size)
-{
-	switch (size) {
-		case 1:
-			return __xchg_u8(ptr, x);
-		case 2:
-			return __xchg_u16(ptr, x);
-		case 4:
-			return __xchg_u32(ptr, x);
-		case 8:
-			return __xchg_u64(ptr, x);
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
+#define __xchg(ptr, x, size) \
+({ \
+	unsigned long __xchg__res; \
+	volatile void *__xchg__ptr = (ptr); \
+	switch (size) { \
+		case 1: __xchg__res = __xchg_u8(__xchg__ptr, x); break; \
+		case 2: __xchg__res = __xchg_u16(__xchg__ptr, x); break; \
+		case 4: __xchg__res = __xchg_u32(__xchg__ptr, x); break; \
+		case 8: __xchg__res = __xchg_u64(__xchg__ptr, x); break; \
+		default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
+	} \
+	__xchg__res; \
+})
 
 #define xchg(ptr,x)							     \
   ({									     \
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
index 38c9d77d372..3745e35cc03 100644
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ b/include/asm-arm/arch-ixp4xx/timex.h
@@ -7,7 +7,9 @@
 
 /*
  * We use IXP425 General purpose timer for our timer needs, it runs at 
- * 66.66... MHz
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
  */
-#define CLOCK_TICK_RATE (66666666)
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
 
diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h
index 24d11672eb6..7fb02138f58 100644
--- a/include/asm-arm/bug.h
+++ b/include/asm-arm/bug.h
@@ -5,7 +5,7 @@
 
 #ifdef CONFIG_BUG
 #ifdef CONFIG_DEBUG_BUGVERBOSE
-extern volatile void __bug(const char *file, int line, void *data);
+extern void __bug(const char *file, int line, void *data) __attribute__((noreturn));
 
 /* give file/line information */
 #define BUG()		__bug(__FILE__, __LINE__, NULL)
diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h
index ff48022e472..4679f63688e 100644
--- a/include/asm-arm/cpu-multi32.h
+++ b/include/asm-arm/cpu-multi32.h
@@ -31,7 +31,7 @@ extern struct processor {
 	/*
 	 * Special stuff for a reset
 	 */
-	volatile void (*reset)(unsigned long addr);
+	void (*reset)(unsigned long addr) __attribute__((noreturn));
 	/*
 	 * Idle the processor
 	 */
diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h
index b5ec5d54665..6723e67244f 100644
--- a/include/asm-arm/cpu-single.h
+++ b/include/asm-arm/cpu-single.h
@@ -41,4 +41,4 @@ extern int cpu_do_idle(void);
 extern void cpu_dcache_clean_area(void *, int);
 extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
 extern void cpu_set_pte(pte_t *ptep, pte_t pte);
-extern volatile void cpu_reset(unsigned long addr);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/include/asm-m32r/smp.h b/include/asm-m32r/smp.h
index b9a20cdad65..7885b7df84a 100644
--- a/include/asm-m32r/smp.h
+++ b/include/asm-m32r/smp.h
@@ -61,9 +61,7 @@ extern physid_mask_t phys_cpu_present_map;
  * Some lowlevel functions might want to know about
  * the real CPU ID <-> CPU # mapping.
  */
-extern volatile int physid_2_cpu[NR_CPUS];
 extern volatile int cpu_2_physid[NR_CPUS];
-#define physid_to_cpu(physid)	physid_2_cpu[physid]
 #define cpu_to_physid(cpu_id)	cpu_2_physid[cpu_id]
 
 #define raw_smp_processor_id()	(current_thread_info()->cpu)
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 99a51670921..206313e2a81 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -138,13 +138,13 @@ extern unsigned long m68k_memoffset;
 #define __pa(vaddr)		((unsigned long)(vaddr)+m68k_memoffset)
 #define __va(paddr)		((void *)((unsigned long)(paddr)-m68k_memoffset))
 #else
-#define __pa(vaddr)		virt_to_phys((void *)vaddr)
-#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
+#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
 #endif
 
 #else	/* !CONFIG_SUN3 */
 /* This #define is a horrible hack to suppress lots of warnings. --m */
-#define __pa(x) ___pa((unsigned long)x)
+#define __pa(x) ___pa((unsigned long)(x))
 static inline unsigned long ___pa(unsigned long x)
 {
      if(x == 0)
diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h
index ce09b47fa81..321fb75b5f2 100644
--- a/include/asm-ppc/time.h
+++ b/include/asm-ppc/time.h
@@ -58,7 +58,7 @@ static __inline__ void set_dec(unsigned int val)
 /* Accessor functions for the timebase (RTC on 601) registers. */
 /* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
 #ifdef CONFIG_6xx
-extern __inline__ int const __USE_RTC(void) {
+extern __inline__ int __attribute_pure__ __USE_RTC(void) {
 	return (mfspr(SPRN_PVR)>>16) == 1;
 }
 #else
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h
index a7f43a251f8..3e3bfe6a8fa 100644
--- a/include/asm-s390/uaccess.h
+++ b/include/asm-s390/uaccess.h
@@ -149,11 +149,11 @@ struct exception_table_entry
 })
 #endif
 
-#ifndef __CHECKER__
 #define __put_user(x, ptr) \
 ({								\
 	__typeof__(*(ptr)) __x = (x);				\
 	int __pu_err;						\
+        __chk_user_ptr(ptr);                                    \
 	switch (sizeof (*(ptr))) {				\
 	case 1:							\
 	case 2:							\
@@ -167,14 +167,6 @@ struct exception_table_entry
 	 }							\
 	__pu_err;						\
 })
-#else
-#define __put_user(x, ptr)			\
-({						\
-	void __user *p;				\
-	p = (ptr);				\
-	0;					\
-})
-#endif
 
 #define put_user(x, ptr)					\
 ({								\
@@ -213,11 +205,11 @@ extern int __put_user_bad(void) __attribute__((noreturn));
 })
 #endif
 
-#ifndef __CHECKER__
 #define __get_user(x, ptr)					\
 ({								\
 	__typeof__(*(ptr)) __x;					\
 	int __gu_err;						\
+        __chk_user_ptr(ptr);                                    \
 	switch (sizeof(*(ptr))) {				\
 	case 1:							\
 	case 2:							\
@@ -232,15 +224,6 @@ extern int __put_user_bad(void) __attribute__((noreturn));
 	(x) = __x;						\
 	__gu_err;						\
 })
-#else
-#define __get_user(x, ptr)			\
-({						\
-	void __user *p;				\
-	p = (ptr);				\
-	0;					\
-})
-#endif
-
 
 #define get_user(x, ptr)					\
 ({								\
diff --git a/include/sound/core.h b/include/sound/core.h
index 38b357fc895..f72b3ef515e 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -360,11 +360,13 @@ int snd_device_free_all(snd_card_t *card, snd_device_cmd_t cmd);
 
 /* isadma.c */
 
+#ifdef CONFIG_ISA_DMA_API
 #define DMA_MODE_NO_ENABLE	0x0100
 
 void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
 void snd_dma_disable(unsigned long dma);
 unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
+#endif
 
 /* misc.c */
 
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 21a4e3b2cbd..d7f4d0c9573 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -636,6 +636,25 @@ static void update_cpu_domains(struct cpuset *cur)
 		return;
 
 	/*
+	 * Hack to avoid 2.6.13 partial node dynamic sched domain bug.
+	 * Require the 'cpu_exclusive' cpuset to include all (or none)
+	 * of the CPUs on each node, or return w/o changing sched domains.
+	 * Remove this hack when dynamic sched domains fixed.
+	 */
+	{
+		int i, j;
+
+		for_each_cpu_mask(i, cur->cpus_allowed) {
+			cpumask_t mask = node_to_cpumask(cpu_to_node(i));
+
+			for_each_cpu_mask(j, mask) {
+				if (!cpu_isset(j, cur->cpus_allowed))
+					return;
+			}
+		}
+	}
+
+	/*
 	 * Get all cpus from parent's cpus_allowed not part of exclusive
 	 * children
 	 */
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index a9bda0a361f..e4e9031dd9c 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -269,6 +269,7 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
 	int qualifier;		/* 'h', 'l', or 'L' for integer fields */
 				/* 'z' support added 23/7/1999 S.H.    */
 				/* 'z' changed to 'Z' --davidm 1/25/99 */
+				/* 't' added for ptrdiff_t */
 
 	/* Reject out-of-range values early */
 	if (unlikely((int) size < 0)) {
@@ -339,7 +340,7 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
 		/* get the conversion qualifier */
 		qualifier = -1;
 		if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' ||
-		    *fmt =='Z' || *fmt == 'z') {
+		    *fmt =='Z' || *fmt == 'z' || *fmt == 't') {
 			qualifier = *fmt;
 			++fmt;
 			if (qualifier == 'l' && *fmt == 'l') {
@@ -467,6 +468,8 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
 				num = (signed long) num;
 		} else if (qualifier == 'Z' || qualifier == 'z') {
 			num = va_arg(args, size_t);
+		} else if (qualifier == 't') {
+			num = va_arg(args, ptrdiff_t);
 		} else if (qualifier == 'h') {
 			num = (unsigned short) va_arg(args, int);
 			if (flags & SIGN)
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 46b23217a35..25da6f699fd 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -995,7 +995,7 @@ int rose_route_frame(struct sk_buff *skb, ax25_cb *ax25)
 	 *	2. It isn't "owned" by any existing route.
 	 */
 	if (frametype != ROSE_CALL_REQUEST) {	/* XXX */
-		ret = 0;
+		res = 0;
 		goto out;
 	}
 
diff --git a/sound/Kconfig b/sound/Kconfig
index ee794ae0604..b65ee4701f9 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -77,7 +77,7 @@ source "sound/parisc/Kconfig"
 endmenu
 
 menu "Open Sound System"
-	depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64))
+	depends on SOUND!=n
 
 config SOUND_PRIME
 	tristate "Open Sound System (DEPRECATED)"
diff --git a/sound/core/Makefile b/sound/core/Makefile
index 764ac184b22..969d75528bd 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -5,7 +5,7 @@
 
 snd-objs     := sound.o init.o memory.o info.o control.o misc.o \
                 device.o wrappers.o
-ifeq ($(CONFIG_ISA),y)
+ifeq ($(CONFIG_ISA_DMA_API),y)
 snd-objs     += isadma.o
 endif
 ifeq ($(CONFIG_SND_OSSEMUL),y)
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 7612884f530..3271e924549 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -432,7 +432,7 @@ EXPORT_SYMBOL(snd_device_new);
 EXPORT_SYMBOL(snd_device_register);
 EXPORT_SYMBOL(snd_device_free);
   /* isadma.c */
-#ifdef CONFIG_ISA
+#ifdef CONFIG_ISA_DMA_API
 EXPORT_SYMBOL(snd_dma_program);
 EXPORT_SYMBOL(snd_dma_disable);
 EXPORT_SYMBOL(snd_dma_pointer);
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 148a856a43a..be4ea60a367 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -1,7 +1,7 @@
 # ALSA ISA drivers
 
 menu "ISA devices"
-	depends on SND!=n && ISA
+	depends on SND!=n && ISA && ISA_DMA_API
 
 config SND_AD1848_LIB
         tristate
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 7bd95ceab7c..953e5f3ea03 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -6,7 +6,7 @@
 # Prompt user for primary drivers.
 config SOUND_BT878
 	tristate "BT878 audio dma"
-	depends on SOUND_PRIME
+	depends on SOUND_PRIME && PCI
 	---help---
 	  Audio DMA support for bt878 based grabber boards.  As you might have
 	  already noticed, bt878 is listed with two functions in /proc/pci.
@@ -80,14 +80,14 @@ config SOUND_EMU10K1
 
 config MIDI_EMU10K1
 	bool "Creative SBLive! MIDI (EXPERIMENTAL)"
-	depends on SOUND_EMU10K1 && EXPERIMENTAL
+	depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
 	help
 	  Say Y if you want to be able to use the OSS /dev/sequencer
 	  interface.  This code is still experimental.
 
 config SOUND_FUSION
 	tristate "Crystal SoundFusion (CS4280/461x)"
-	depends on SOUND_PRIME
+	depends on SOUND_PRIME && PCI
 	help
 	  This module drives the Crystal SoundFusion devices (CS4280/46xx
 	  series) when wired as native sound drivers with AC97 codecs.  If
@@ -95,7 +95,7 @@ config SOUND_FUSION
 
 config SOUND_CS4281
 	tristate "Crystal Sound CS4281"
-	depends on SOUND_PRIME
+	depends on SOUND_PRIME && PCI
 	help
 	  Picture and feature list at
 	  <http://www.pcbroker.com/crystal4281.html>.
@@ -179,7 +179,7 @@ config SOUND_HARMONY
 
 config SOUND_SONICVIBES
 	tristate "S3 SonicVibes"
-	depends on SOUND_PRIME
+	depends on SOUND_PRIME && PCI
 	help
 	  Say Y or M if you have a PCI sound card utilizing the S3
 	  SonicVibes chipset. To find out if your sound card uses a
@@ -226,7 +226,7 @@ config SOUND_AU1550_AC97
 
 config SOUND_TRIDENT
 	tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
-	depends on SOUND_PRIME
+	depends on SOUND_PRIME && PCI
 	---help---
 	  Say Y or M if you have a PCI sound card utilizing the Trident
 	  4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -503,7 +503,7 @@ config SOUND_VIA82CXXX
 
 config MIDI_VIA82CXXX
 	bool "VIA 82C686 MIDI"
-	depends on SOUND_VIA82CXXX
+	depends on SOUND_VIA82CXXX && ISA_DMA_API
 	help
 	  Answer Y to use the MIDI interface of the Via686. You may need to
 	  enable this in the BIOS before it will work. This is for connection
@@ -512,7 +512,7 @@ config MIDI_VIA82CXXX
 
 config SOUND_OSS
 	tristate "OSS sound modules"
-	depends on SOUND_PRIME
+	depends on SOUND_PRIME && ISA_DMA_API
 	help
 	  OSS is the Open Sound System suite of sound card drivers.  They make
 	  sound programming easier since they provide a common API.  Say Y or
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index db9afb61d6f..9bf3ee544d8 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -80,7 +80,7 @@ obj-$(CONFIG_SOUND_ALI5455)	+= ali5455.o ac97_codec.o
 obj-$(CONFIG_SOUND_IT8172)	+= ite8172.o ac97_codec.o
 obj-$(CONFIG_SOUND_FORTE)	+= forte.o ac97_codec.o
 
-obj-$(CONFIG_SOUND_AD1980)	+= ac97_plugin_ad1980.o
+obj-$(CONFIG_SOUND_AD1980)	+= ac97_plugin_ad1980.o ac97_codec.o
 obj-$(CONFIG_SOUND_WM97XX)	+= ac97_plugin_wm97xx.o
 
 ifeq ($(CONFIG_MIDI_EMU10K1),y)
diff --git a/sound/oss/i810_audio.c b/sound/oss/i810_audio.c
index 7e9f667cf7a..b9a640fe48b 100644
--- a/sound/oss/i810_audio.c
+++ b/sound/oss/i810_audio.c
@@ -3430,9 +3430,9 @@ out_iospace:
 		release_mem_region(card->iobase_mmio_phys, 256);
 	}
 out_pio:	
-	release_region(card->iobase, 64);
-out_region2:
 	release_region(card->ac97base, 256);
+out_region2:
+	release_region(card->iobase, 64);
 out_region1:
 	pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
 	    card->channel, card->chandma);
diff --git a/sound/oss/vidc.h b/sound/oss/vidc.h
index bab7044572d..d5b8064dc56 100644
--- a/sound/oss/vidc.h
+++ b/sound/oss/vidc.h
@@ -10,10 +10,6 @@
  *  VIDC sound function prototypes
  */
 
-/* vidc.c */
-
-extern int vidc_busy;
-
 /* vidc_fill.S */
 
 /*
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 6d7a00f34d8..26b42bb20a0 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -314,7 +314,7 @@ config SND_YMFPCI
 
 config SND_ALS4000
 	tristate "Avance Logic ALS4000"
-	depends on SND
+	depends on SND && ISA_DMA_API
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM