diff options
author | Dustin McIntire <dustin@sensoria.com> | 2006-04-19 20:24:51 -0700 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-04-20 17:38:39 -0400 |
commit | 0a0c72c9118c4e63080eb409f0cfdf15808d23a4 (patch) | |
tree | 99bd8141839f4b26d853626b5eaf532ca8a38bde | |
parent | 89be0501a013737d562f56ce1c5a2ff075995b11 (diff) |
[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips
>
> The patch was badly wordwrapped. Please fix and resend.
>
OK, I've fixed the wrapping and removed the CONFIG_ARM restriction. I've also did my
best to modify the C style to conform to the comments.
I noticed that the patch is getting ignored by majordomo due to its size >100K.
Should it be broken up somehow to allow posting to the lists?
Signed-off-by: Dustin McIntire <dustin@sensoria.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r-- | drivers/net/Kconfig | 16 | ||||
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/smc911x.c | 2307 | ||||
-rw-r--r-- | drivers/net/smc911x.h | 835 |
4 files changed, 3159 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index bdaaad8f212..68bc073b8b3 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -865,6 +865,22 @@ config DM9000 <file:Documentation/networking/net-modules.txt>. The module will be called dm9000. +config SMC911X + tristate "SMSC LAN911[5678] support" + select CRC32 + select MII + depends on NET_ETHERNET + help + This is a driver for SMSC's LAN911x series of Ethernet chipsets + including the new LAN9115, LAN9116, LAN9117, and LAN9118. + Say Y if you want it compiled into the kernel, + and read the Ethernet-HOWTO, available from + <http://www.linuxdoc.org/docs.html#howto>. + + This driver is also available as a module. The module will be + called smc911x. If you want to compile it as a module, say M + here and read <file:Documentation/modules.txt> + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on NET_ETHERNET && ISA diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b90468aea07..b01cc9a3cb1 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -193,6 +193,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o obj-$(CONFIG_IBMVETH) += ibmveth.o obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_SMC91X) += smc91x.o +obj-$(CONFIG_SMC911X) += smc911x.o obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/ diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c new file mode 100644 index 00000000000..b3b0d360da1 --- /dev/null +++ b/drivers/net/smc911x.c @@ -0,0 +1,2307 @@ +/* + * smc911x.c + * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices. + * + * Copyright (C) 2005 Sensoria Corp + * Derived from the unified SMC91x driver by Nicolas Pitre + * and the smsc911x.c reference driver by SMSC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Arguments: + * watchdog = TX watchdog timeout + * tx_fifo_kb = Size of TX FIFO in KB + * + * History: + * 04/16/05 Dustin McIntire Initial version + */ +static const char version[] = + "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@sensoria.com>\n"; + +/* Debugging options */ +#define ENABLE_SMC_DEBUG_RX 0 +#define ENABLE_SMC_DEBUG_TX 0 +#define ENABLE_SMC_DEBUG_DMA 0 +#define ENABLE_SMC_DEBUG_PKTS 0 +#define ENABLE_SMC_DEBUG_MISC 0 +#define ENABLE_SMC_DEBUG_FUNC 0 + +#define SMC_DEBUG_RX ((ENABLE_SMC_DEBUG_RX ? 1 : 0) << 0) +#define SMC_DEBUG_TX ((ENABLE_SMC_DEBUG_TX ? 1 : 0) << 1) +#define SMC_DEBUG_DMA ((ENABLE_SMC_DEBUG_DMA ? 1 : 0) << 2) +#define SMC_DEBUG_PKTS ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3) +#define SMC_DEBUG_MISC ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4) +#define SMC_DEBUG_FUNC ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5) + +#ifndef SMC_DEBUG +#define SMC_DEBUG ( SMC_DEBUG_RX | \ + SMC_DEBUG_TX | \ + SMC_DEBUG_DMA | \ + SMC_DEBUG_PKTS | \ + SMC_DEBUG_MISC | \ + SMC_DEBUG_FUNC \ + ) +#endif + + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/crc32.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/workqueue.h> + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include "smc911x.h" + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +static int tx_fifo_kb=8; +module_param(tx_fifo_kb, int, 0400); +MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)"); + +MODULE_LICENSE("GPL"); + +/* + * The internal workings of the driver. If you are changing anything + * here with the SMC stuff, you should have the datasheet and know + * what you are doing. + */ +#define CARDNAME "smc911x" + +/* + * Use power-down feature of the chip + */ +#define POWER_DOWN 1 + + +/* store this information for the driver.. */ +struct smc911x_local { + /* + * If I have to wait until the DMA is finished and ready to reload a + * packet, I will store the skbuff here. Then, the DMA will send it + * out and free it. + */ + struct sk_buff *pending_tx_skb; + + /* + * these are things that the kernel wants me to keep, so users + * can find out semi-useless statistics of how well the card is + * performing + */ + struct net_device_stats stats; + + /* version/revision of the SMC911x chip */ + u16 version; + u16 revision; + + /* FIFO sizes */ + int tx_fifo_kb; + int tx_fifo_size; + int rx_fifo_size; + int afc_cfg; + + /* Contains the current active receive/phy mode */ + int ctl_rfduplx; + int ctl_rspeed; + + u32 msg_enable; + u32 phy_type; + struct mii_if_info mii; + + /* work queue */ + struct work_struct phy_configure; + int work_pending; + + int tx_throttle; + spinlock_t lock; + +#ifdef SMC_USE_DMA + /* DMA needs the physical address of the chip */ + u_long physaddr; + int rxdma; + int txdma; + int rxdma_active; + int txdma_active; + struct sk_buff *current_rx_skb; + struct sk_buff *current_tx_skb; + struct device *dev; +#endif +}; + +#if SMC_DEBUG > 0 +#define DBG(n, args...) \ + do { \ + if (SMC_DEBUG & (n)) \ + printk(args); \ + } while (0) + +#define PRINTK(args...) printk(args) +#else +#define DBG(n, args...) do { } while (0) +#define PRINTK(args...) printk(KERN_DEBUG args) +#endif + +#if SMC_DEBUG_PKTS > 0 +static void PRINT_PKT(u_char *buf, int length) +{ + int i; + int remainder; + int lines; + + lines = length / 16; + remainder = length % 16; + + for (i = 0; i < lines ; i ++) { + int cur; + for (cur = 0; cur < 8; cur++) { + u_char a, b; + a = *buf++; + b = *buf++; + printk("%02x%02x ", a, b); + } + printk("\n"); + } + for (i = 0; i < remainder/2 ; i++) { + u_char a, b; + a = *buf++; + b = *buf++; + printk("%02x%02x ", a, b); + } + printk("\n"); +} +#else +#define PRINT_PKT(x...) do { } while (0) +#endif + + +/* this enables an interrupt in the interrupt mask register */ +#define SMC_ENABLE_INT(x) do { \ + unsigned int __mask; \ + unsigned long __flags; \ + spin_lock_irqsave(&lp->lock, __flags); \ + __mask = SMC_GET_INT_EN(); \ + __mask |= (x); \ + SMC_SET_INT_EN(__mask); \ + spin_unlock_irqrestore(&lp->lock, __flags); \ +} while (0) + +/* this disables an interrupt from the interrupt mask register */ +#define SMC_DISABLE_INT(x) do { \ + unsigned int __mask; \ + unsigned long __flags; \ + spin_lock_irqsave(&lp->lock, __flags); \ + __mask = SMC_GET_INT_EN(); \ + __mask &= ~(x); \ + SMC_SET_INT_EN(__mask); \ + spin_unlock_irqrestore(&lp->lock, __flags); \ +} while (0) + +/* + * this does a soft reset on the device + */ +static void smc911x_reset(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + unsigned int reg, timeout=0, resets=1; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + /* Take out of PM setting first */ + if ((SMC_GET_PMT_CTRL() & PMT_CTRL_READY_) == 0) { + /* Write to the bytetest will take out of powerdown */ + SMC_SET_BYTE_TEST(0); + timeout=10; + do { + udelay(10); + reg = SMC_GET_PMT_CTRL() & PMT_CTRL_READY_; + } while ( timeout-- && !reg); + if (timeout == 0) { + PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name); + return; + } + } + + /* Disable all interrupts */ + spin_lock_irqsave(&lp->lock, flags); + SMC_SET_INT_EN(0); + spin_unlock_irqrestore(&lp->lock, flags); + + while (resets--) { + SMC_SET_HW_CFG(HW_CFG_SRST_); + timeout=10; + do { + udelay(10); + reg = SMC_GET_HW_CFG(); + /* If chip indicates reset timeout then try again */ + if (reg & HW_CFG_SRST_TO_) { + PRINTK("%s: chip reset timeout, retrying...\n", dev->name); + resets++; + break; + } + } while ( timeout-- && (reg & HW_CFG_SRST_)); + } + if (timeout == 0) { + PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name); + return; + } + + /* make sure EEPROM has finished loading before setting GPIO_CFG */ + timeout=1000; + while ( timeout-- && (SMC_GET_E2P_CMD() & E2P_CMD_EPC_BUSY_)) { + udelay(10); + } + if (timeout == 0){ + PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name); + return; + } + + /* Initialize interrupts */ + SMC_SET_INT_EN(0); + SMC_ACK_INT(-1); + + /* Reset the FIFO level and flow control settings */ + SMC_SET_HW_CFG((lp->tx_fifo_kb & 0xF) << 16); +//TODO: Figure out what appropriate pause time is + SMC_SET_FLOW(FLOW_FCPT_ | FLOW_FCEN_); + SMC_SET_AFC_CFG(lp->afc_cfg); + + + /* Set to LED outputs */ + SMC_SET_GPIO_CFG(0x70070000); + + /* + * Deassert IRQ for 1*10us for edge type interrupts + * and drive IRQ pin push-pull + */ + SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ ); + + /* clear anything saved */ + if (lp->pending_tx_skb != NULL) { + dev_kfree_skb (lp->pending_tx_skb); + lp->pending_tx_skb = NULL; + lp->stats.tx_errors++; + lp->stats.tx_aborted_errors++; + } +} + +/* + * Enable Interrupts, Receive, and Transmit + */ +static void smc911x_enable(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + unsigned mask, cfg, cr; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + SMC_SET_MAC_ADDR(dev->dev_addr); + + /* Enable TX */ + cfg = SMC_GET_HW_CFG(); + cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF; + cfg |= HW_CFG_SF_; + SMC_SET_HW_CFG(cfg); + SMC_SET_FIFO_TDA(0xFF); + /* Update TX stats on every 64 packets received or every 1 sec */ + SMC_SET_FIFO_TSL(64); + SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000); + + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CR(cr); + cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_; + SMC_SET_MAC_CR(cr); + SMC_SET_TX_CFG(TX_CFG_TX_ON_); + spin_unlock_irqrestore(&lp->lock, flags); + + /* Add 2 byte padding to start of packets */ + SMC_SET_RX_CFG((2<<8) & RX_CFG_RXDOFF_); + + /* Turn on receiver and enable RX */ + if (cr & MAC_CR_RXEN_) + DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name); + + spin_lock_irqsave(&lp->lock, flags); + SMC_SET_MAC_CR( cr | MAC_CR_RXEN_ ); + spin_unlock_irqrestore(&lp->lock, flags); + + /* Interrupt on every received packet */ + SMC_SET_FIFO_RSA(0x01); + SMC_SET_FIFO_RSL(0x00); + + /* now, enable interrupts */ + mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | + INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | + INT_EN_PHY_INT_EN_; + if (IS_REV_A(lp->revision)) + mask|=INT_EN_RDFL_EN_; + else { + mask|=INT_EN_RDFO_EN_; + } + SMC_ENABLE_INT(mask); +} + +/* + * this puts the device in an inactive state + */ +static void smc911x_shutdown(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + unsigned cr; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __FUNCTION__); + + /* Disable IRQ's */ + SMC_SET_INT_EN(0); + + /* Turn of Rx and TX */ + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CR(cr); + cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); + SMC_SET_MAC_CR(cr); + SMC_SET_TX_CFG(TX_CFG_STOP_TX_); + spin_unlock_irqrestore(&lp->lock, flags); +} + +static inline void smc911x_drop_pkt(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int fifo_count, timeout, reg; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __FUNCTION__); + fifo_count = SMC_GET_RX_FIFO_INF() & 0xFFFF; + if (fifo_count <= 4) { + /* Manually dump the packet data */ + while (fifo_count--) + SMC_GET_RX_FIFO(); + } else { + /* Fast forward through the bad packet */ + SMC_SET_RX_DP_CTRL(RX_DP_CTRL_FFWD_BUSY_); + timeout=50; + do { + udelay(10); + reg = SMC_GET_RX_DP_CTRL() & RX_DP_CTRL_FFWD_BUSY_; + } while ( timeout-- && reg); + if (timeout == 0) { + PRINTK("%s: timeout waiting for RX fast forward\n", dev->name); + } + } +} + +/* + * This is the procedure to handle the receipt of a packet. + * It should be called after checking for packet presence in + * the RX status FIFO. It must be called with the spin lock + * already held. + */ +static inline void smc911x_rcv(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned int pkt_len, status; + struct sk_buff *skb; + unsigned char *data; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", + dev->name, __FUNCTION__); + status = SMC_GET_RX_STS_FIFO(); + DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n", + dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff); + pkt_len = (status & RX_STS_PKT_LEN_) >> 16; + if (status & RX_STS_ES_) { + /* Deal with a bad packet */ + lp->stats.rx_errors++; + if (status & RX_STS_CRC_ERR_) + lp->stats.rx_crc_errors++; + else { + if (status & RX_STS_LEN_ERR_) + lp->stats.rx_length_errors++; + if (status & RX_STS_MCAST_) + lp->stats.multicast++; + } + /* Remove the bad packet data from the RX FIFO */ + smc911x_drop_pkt(dev); + } else { + /* Receive a valid packet */ + /* Alloc a buffer with extra room for DMA alignment */ + skb=dev_alloc_skb(pkt_len+32); + if (unlikely(skb == NULL)) { + PRINTK( "%s: Low memory, rcvd packet dropped.\n", + dev->name); + lp->stats.rx_dropped++; + smc911x_drop_pkt(dev); + return; + } + /* Align IP header to 32 bits + * Note that the device is configured to add a 2 + * byte padding to the packet start, so we really + * want to write to the orignal data pointer */ + data = skb->data; + skb_reserve(skb, 2); + skb_put(skb,pkt_len-4); +#ifdef SMC_USE_DMA + { + unsigned int fifo; + /* Lower the FIFO threshold if possible */ + fifo = SMC_GET_FIFO_INT(); + if (fifo & 0xFF) fifo--; + DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n", + dev->name, fifo & 0xff); + SMC_SET_FIFO_INT(fifo); + /* Setup RX DMA */ + SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_)); + lp->rxdma_active = 1; + lp->current_rx_skb = skb; + SMC_PULL_DATA(data, (pkt_len+2+15) & ~15); + /* Packet processing deferred to DMA RX interrupt */ + } +#else + SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_)); + SMC_PULL_DATA(data, pkt_len+2+3); + + DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name,); + PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64); + dev->last_rx = jiffies; + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len-4; +#endif + } +} + +/* + * This is called to actually send a packet to the chip. + */ +static void smc911x_hardware_send_pkt(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + struct sk_buff *skb; + unsigned int cmdA, cmdB, len; + unsigned char *buf; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __FUNCTION__); + BUG_ON(lp->pending_tx_skb == NULL); + + skb = lp->pending_tx_skb; + lp->pending_tx_skb = NULL; + + /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ + /* cmdB {31:16] pkt tag [10:0] length */ +#ifdef SMC_USE_DMA + /* 16 byte buffer alignment mode */ + buf = (char*)((u32)(skb->data) & ~0xF); + len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; + cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) | + TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | + skb->len; +#else + buf = (char*)((u32)skb->data & ~0x3); + len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3; + cmdA = (((u32)skb->data & 0x3) << 16) | + TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | + skb->len; +#endif + /* tag is packet length so we can use this in stats update later */ + cmdB = (skb->len << 16) | (skb->len & 0x7FF); + + DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n", + dev->name, len, len, buf, cmdA, cmdB); + SMC_SET_TX_FIFO(cmdA); + SMC_SET_TX_FIFO(cmdB); + + DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name); + PRINT_PKT(buf, len <= 64 ? len : 64); + + /* Send pkt via PIO or DMA */ +#ifdef SMC_USE_DMA + lp->current_tx_skb = skb; + SMC_PUSH_DATA(buf, len); + /* DMA complete IRQ will free buffer and set jiffies */ +#else + SMC_PUSH_DATA(buf, len); + dev->trans_start = jiffies; + dev_kfree_skb(skb); +#endif + spin_lock_irqsave(&lp->lock, flags); + if (!lp->tx_throttle) { + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&lp->lock, flags); + SMC_ENABLE_INT(INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_); +} + +/* + * Since I am not sure if I will have enough room in the chip's ram + * to store the packet, I call this routine which either sends it + * now, or set the card to generates an interrupt when ready + * for the packet. + */ +static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned int free; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", + dev->name, __FUNCTION__); + + BUG_ON(lp->pending_tx_skb != NULL); + + free = SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TDFREE_; + DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free); + + /* Turn off the flow when running out of space in FIFO */ + if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) { + DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n", + dev->name, free); + spin_lock_irqsave(&lp->lock, flags); + /* Reenable when at least 1 packet of size MTU present */ + SMC_SET_FIFO_TDA((SMC911X_TX_FIFO_LOW_THRESHOLD)/64); + lp->tx_throttle = 1; + netif_stop_queue(dev); + spin_unlock_irqrestore(&lp->lock, flags); + } + + /* Drop packets when we run out of space in TX FIFO + * Account for overhead required for: + * + * Tx command words 8 bytes + * Start offset 15 bytes + * End padding 15 bytes + */ + if (unlikely(free < (skb->len + 8 + 15 + 15))) { + printk("%s: No Tx free space %d < %d\n", + dev->name, free, skb->len); + lp->pending_tx_skb = NULL; + lp->stats.tx_errors++; + lp->stats.tx_dropped++; + dev_kfree_skb(skb); + return 0; + } + +#ifdef SMC_USE_DMA + { + /* If the DMA is already running then defer this packet Tx until + * the DMA IRQ starts it + */ + spin_lock_irqsave(&lp->lock, flags); + if (lp->txdma_active) { + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name); + lp->pending_tx_skb = skb; + netif_stop_queue(dev); + spin_unlock_irqrestore(&lp->lock, flags); + return 0; + } else { + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name); + lp->txdma_active = 1; + } + spin_unlock_irqrestore(&lp->lock, flags); + } +#endif + lp->pending_tx_skb = skb; + smc911x_hardware_send_pkt(dev); + + return 0; +} + +/* + * This handles a TX status interrupt, which is only called when: + * - a TX error occurred, or + * - TX of a packet completed. + */ +static void smc911x_tx(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + unsigned int tx_status; + + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", + dev->name, __FUNCTION__); + + /* Collect the TX status */ + while (((SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16) != 0) { + DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n", + dev->name, + (SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16); + tx_status = SMC_GET_TX_STS_FIFO(); + lp->stats.tx_packets++; + lp->stats.tx_bytes+=tx_status>>16; + DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n", + dev->name, (tx_status & 0xffff0000) >> 16, + tx_status & 0x0000ffff); + /* count Tx errors, but ignore lost carrier errors when in + * full-duplex mode */ + if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && + !(tx_status & 0x00000306))) { + lp->stats.tx_errors++; + } + if (tx_status & TX_STS_MANY_COLL_) { + lp->stats.collisions+=16; + lp->stats.tx_aborted_errors++; + } else { + lp->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3; + } + /* carrier error only has meaning for half-duplex communication */ + if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && + !lp->ctl_rfduplx) { + lp->stats.tx_carrier_errors++; + } + if (tx_status & TX_STS_LATE_COLL_) { + lp->stats.collisions++; + lp->stats.tx_aborted_errors++; + } + } +} + + +/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ +/* + * Reads a register from the MII Management serial interface + */ + +static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int phydata; + + SMC_GET_MII(phyreg, phyaddr, phydata); + + DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n", + __FUNCTION__, phyaddr, phyreg, phydata); + return phydata; +} + + +/* + * Writes a register to the MII Management serial interface + */ +static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg, + int phydata) +{ + unsigned long ioaddr = dev->base_addr; + + DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", + __FUNCTION__, phyaddr, phyreg, phydata); + + SMC_SET_MII(phyreg, phyaddr, phydata); +} + +/* + * Finds and reports the PHY address (115 and 117 have external + * PHY interface 118 has internal only + */ +static void smc911x_phy_detect(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + int phyaddr; + unsigned int cfg, id1, id2; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + lp->phy_type = 0; + + /* + * Scan all 32 PHY addresses if necessary, starting at + * PHY#1 to PHY#31, and then PHY#0 last. + */ + switch(lp->version) { + case 0x115: + case 0x117: + cfg = SMC_GET_HW_CFG(); + if (cfg & HW_CFG_EXT_PHY_DET_) { + cfg &= ~HW_CFG_PHY_CLK_SEL_; + cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; + SMC_SET_HW_CFG(cfg); + udelay(10); /* Wait for clocks to stop */ + + cfg |= HW_CFG_EXT_PHY_EN_; + SMC_SET_HW_CFG(cfg); + udelay(10); /* Wait for clocks to stop */ + + cfg &= ~HW_CFG_PHY_CLK_SEL_; + cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; + SMC_SET_HW_CFG(cfg); + udelay(10); /* Wait for clocks to stop */ + + cfg |= HW_CFG_SMI_SEL_; + SMC_SET_HW_CFG(cfg); + + for (phyaddr = 1; phyaddr < 32; ++phyaddr) { + + /* Read the PHY identifiers */ + SMC_GET_PHY_ID1(phyaddr & 31, id1); + SMC_GET_PHY_ID2(phyaddr & 31, id2); + + /* Make sure it is a valid identifier */ + if (id1 != 0x0000 && id1 != 0xffff && + id1 != 0x8000 && id2 != 0x0000 && + id2 != 0xffff && id2 != 0x8000) { + /* Save the PHY's address */ + lp->mii.phy_id = phyaddr & 31; + lp->phy_type = id1 << 16 | id2; + break; + } + } + } + default: + /* Internal media only */ + SMC_GET_PHY_ID1(1, id1); + SMC_GET_PHY_ID2(1, id2); + /* Save the PHY's address */ + lp->mii.phy_id = 1; + lp->phy_type = id1 << 16 | id2; + } + + DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n", + dev->name, id1, id2, lp->mii.phy_id); +} + +/* + * Sets the PHY to a configuration as determined by the user. + * Called with spin_lock held. + */ +static int smc911x_phy_fixed(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int phyaddr = lp->mii.phy_id; + int bmcr; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + /* Enter Link Disable state */ + SMC_GET_PHY_BMCR(phyaddr, bmcr); + bmcr |= BMCR_PDOWN; + SMC_SET_PHY_BMCR(phyaddr, bmcr); + + /* + * Set our fixed capabilities + * Disable auto-negotiation + */ + bmcr &= ~BMCR_ANENABLE; + if (lp->ctl_rfduplx) + bmcr |= BMCR_FULLDPLX; + + if (lp->ctl_rspeed == 100) + bmcr |= BMCR_SPEED100; + + /* Write our capabilities to the phy control register */ + SMC_SET_PHY_BMCR(phyaddr, bmcr); + + /* Re-Configure the Receive/Phy Control register */ + bmcr &= ~BMCR_PDOWN; + SMC_SET_PHY_BMCR(phyaddr, bmcr); + + return 1; +} + +/* + * smc911x_phy_reset - reset the phy + * @dev: net device + * @phy: phy address + * + * Issue a software reset for the specified PHY and + * wait up to 100ms for the reset to complete. We should + * not access the PHY for 50ms after issuing the reset. + * + * The time to wait appears to be dependent on the PHY. + * + */ +static int smc911x_phy_reset(struct net_device *dev, int phy) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int timeout; + unsigned long flags; + unsigned int reg; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__); + + spin_lock_irqsave(&lp->lock, flags); + reg = SMC_GET_PMT_CTRL(); + reg &= ~0xfffff030; + reg |= PMT_CTRL_PHY_RST_; + SMC_SET_PMT_CTRL(reg); + spin_unlock_irqrestore(&lp->lock, flags); + for (timeout = 2; timeout; timeout--) { + msleep(50); + spin_lock_irqsave(&lp->lock, flags); + reg = SMC_GET_PMT_CTRL(); + spin_unlock_irqrestore(&lp->lock, flags); + if (!(reg & PMT_CTRL_PHY_RST_)) { + /* extra delay required because the phy may + * not be completed with its reset + * when PHY_BCR_RESET_ is cleared. 256us + * should suffice, but use 500us to be safe + */ + udelay(500); + break; + } + } + + return reg & PMT_CTRL_PHY_RST_; +} + +/* + * smc911x_phy_powerdown - powerdown phy + * @dev: net device + * @phy: phy address + * + * Power down the specified PHY + */ +static void smc911x_phy_powerdown(struct net_device *dev, int phy) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int bmcr; + + /* Enter Link Disable state */ + SMC_GET_PHY_BMCR(phy, bmcr); + bmcr |= BMCR_PDOWN; + SMC_SET_PHY_BMCR(phy, bmcr); +} + +/* + * smc911x_phy_check_media - check the media status and adjust BMCR + * @dev: net device + * @init: set true for initialisation + * + * Select duplex mode depending on negotiation state. This + * also updates our carrier state. + */ +static void smc911x_phy_check_media(struct net_device *dev, int init) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int phyaddr = lp->mii.phy_id; + unsigned int bmcr, cr; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) { + /* duplex state has changed */ + SMC_GET_PHY_BMCR(phyaddr, bmcr); + SMC_GET_MAC_CR(cr); + if (lp->mii.full_duplex) { + DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name); + bmcr |= BMCR_FULLDPLX; + cr |= MAC_CR_RCVOWN_; + } else { + DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name); + bmcr &= ~BMCR_FULLDPLX; + cr &= ~MAC_CR_RCVOWN_; + } + SMC_SET_PHY_BMCR(phyaddr, bmcr); + SMC_SET_MAC_CR(cr); + } +} + +/* + * Configures the specified PHY through the MII management interface + * using Autonegotiation. + * Calls smc911x_phy_fixed() if the user has requested a certain config. + * If RPC ANEG bit is set, the media selection is dependent purely on + * the selection by the MII (either in the MII BMCR reg or the result + * of autonegotiation.) If the RPC ANEG bit is cleared, the selection + * is controlled by the RPC SPEED and RPC DPLX bits. + */ +static void smc911x_phy_configure(void *data) +{ + struct net_device *dev = data; + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int phyaddr = lp->mii.phy_id; + int my_phy_caps; /* My PHY capabilities */ + int my_ad_caps; /* My Advertised capabilities */ + int status; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__); + + /* + * We should not be called if phy_type is zero. + */ + if (lp->phy_type == 0) + goto smc911x_phy_configure_exit; + + if (smc911x_phy_reset(dev, phyaddr)) { + printk("%s: PHY reset timed out\n", dev->name); + goto smc911x_phy_configure_exit; + } + spin_lock_irqsave(&lp->lock, flags); + + /* + * Enable PHY Interrupts (for register 18) + * Interrupts listed here are enabled + */ + SMC_SET_PHY_INT_MASK(phyaddr, PHY_INT_MASK_ENERGY_ON_ | + PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ | + PHY_INT_MASK_LINK_DOWN_); + + /* If the user requested no auto neg, then go set his request */ + if (lp->mii.force_media) { + smc911x_phy_fixed(dev); + goto smc911x_phy_configure_exit; + } + + /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */ + SMC_GET_PHY_BMSR(phyaddr, my_phy_caps); + if (!(my_phy_caps & BMSR_ANEGCAPABLE)) { + printk(KERN_INFO "Auto negotiation NOT supported\n"); + smc911x_phy_fixed(dev); + goto smc911x_phy_configure_exit; + } + + /* CSMA capable w/ both pauses */ + my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + + if (my_phy_caps & BMSR_100BASE4) + my_ad_caps |= ADVERTISE_100BASE4; + if (my_phy_caps & BMSR_100FULL) + my_ad_caps |= ADVERTISE_100FULL; + if (my_phy_caps & BMSR_100HALF) + my_ad_caps |= ADVERTISE_100HALF; + if (my_phy_caps & BMSR_10FULL) + my_ad_caps |= ADVERTISE_10FULL; + if (my_phy_caps & BMSR_10HALF) + my_ad_caps |= ADVERTISE_10HALF; + + /* Disable capabilities not selected by our user */ + if (lp->ctl_rspeed != 100) + my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF); + + if (!lp->ctl_rfduplx) + my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL); + + /* Update our Auto-Neg Advertisement Register */ + SMC_SET_PHY_MII_ADV(phyaddr, my_ad_caps); + lp->mii.advertising = my_ad_caps; + + /* + * Read the register back. Without this, it appears that when + * auto-negotiation is restarted, sometimes it isn't ready and + * the link does not come up. + */ + udelay(10); + SMC_GET_PHY_MII_ADV(phyaddr, status); + + DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps); + DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps); + + /* Restart auto-negotiation process in order to advertise my caps */ + SMC_SET_PHY_BMCR(phyaddr, BMCR_ANENABLE | BMCR_ANRESTART); + + smc911x_phy_check_media(dev, 1); + +smc911x_phy_configure_exit: + spin_unlock_irqrestore(&lp->lock, flags); + lp->work_pending = 0; +} + +/* + * smc911x_phy_interrupt + * + * Purpose: Handle interrupts relating to PHY register 18. This is + * called from the "hard" interrupt handler under our private spinlock. + */ +static void smc911x_phy_interrupt(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int phyaddr = lp->mii.phy_id; + int status; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + if (lp->phy_type == 0) + return; + + smc911x_phy_check_media(dev, 0); + /* read to clear status bits */ + SMC_GET_PHY_INT_SRC(phyaddr,status); + DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n", + dev->name, status & 0xffff); + DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n", + dev->name, SMC_GET_AFC_CFG()); +} + +/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/ + +/* + * This is the main routine of the driver, to handle the device when + * it needs some attention. + */ +static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + unsigned int status, mask, timeout; + unsigned int rx_overrun=0, cr, pkts; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + spin_lock_irqsave(&lp->lock, flags); + + /* Spurious interrupt check */ + if ((SMC_GET_IRQ_CFG() & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) != + (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) { + return IRQ_NONE; + } + + mask = SMC_GET_INT_EN(); + SMC_SET_INT_EN(0); + + /* set a timeout value, so I don't stay here forever */ + timeout = 8; + + + do { + status = SMC_GET_INT(); + + DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n", + dev->name, status, mask, status & ~mask); + + status &= mask; + if (!status) + break; + + /* Handle SW interrupt condition */ + if (status & INT_STS_SW_INT_) { + SMC_ACK_INT(INT_STS_SW_INT_); + mask &= ~INT_EN_SW_INT_EN_; + } + /* Handle various error conditions */ + if (status & INT_STS_RXE_) { + SMC_ACK_INT(INT_STS_RXE_); + lp->stats.rx_errors++; + } + if (status & INT_STS_RXDFH_INT_) { + SMC_ACK_INT(INT_STS_RXDFH_INT_); + lp->stats.rx_dropped+=SMC_GET_RX_DROP(); + } + /* Undocumented interrupt-what is the right thing to do here? */ + if (status & INT_STS_RXDF_INT_) { + SMC_ACK_INT(INT_STS_RXDF_INT_); + } + + /* Rx Data FIFO exceeds set level */ + if (status & INT_STS_RDFL_) { + if (IS_REV_A(lp->revision)) { + rx_overrun=1; + SMC_GET_MAC_CR(cr); + cr &= ~MAC_CR_RXEN_; + SMC_SET_MAC_CR(cr); + DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name); + lp->stats.rx_errors++; + lp->stats.rx_fifo_errors++; + } + SMC_ACK_INT(INT_STS_RDFL_); + } + if (status & INT_STS_RDFO_) { + if (!IS_REV_A(lp->revision)) { + SMC_GET_MAC_CR(cr); + cr &= ~MAC_CR_RXEN_; + SMC_SET_MAC_CR(cr); + rx_overrun=1; + DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name); + lp->stats.rx_errors++; + lp->stats.rx_fifo_errors++; + } + SMC_ACK_INT(INT_STS_RDFO_); + } + /* Handle receive condition */ + if ((status & INT_STS_RSFL_) || rx_overrun) { + unsigned int fifo; + DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name); + fifo = SMC_GET_RX_FIFO_INF(); + pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; + DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n", + dev->name, pkts, fifo & 0xFFFF ); + if (pkts != 0) { +#ifdef SMC_USE_DMA + unsigned int fifo; + if (lp->rxdma_active){ + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, + "%s: RX DMA active\n", dev->name); + /* The DMA is already running so up the IRQ threshold */ + fifo = SMC_GET_FIFO_INT() & ~0xFF; + fifo |= pkts & 0xFF; + DBG(SMC_DEBUG_RX, + "%s: Setting RX stat FIFO threshold to %d\n", + dev->name, fifo & 0xff); + SMC_SET_FIFO_INT(fifo); + } else +#endif + smc911x_rcv(dev); + } + SMC_ACK_INT(INT_STS_RSFL_); + } + /* Handle transmit FIFO available */ + if (status & INT_STS_TDFA_) { + DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name); + SMC_SET_FIFO_TDA(0xFF); + lp->tx_throttle = 0; +#ifdef SMC_USE_DMA + if (!lp->txdma_active) +#endif + netif_wake_queue(dev); + SMC_ACK_INT(INT_STS_TDFA_); + } + /* Handle transmit done condition */ +#if 1 + if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) { + DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, + "%s: Tx stat FIFO limit (%d) /GPT irq\n", + dev->name, (SMC_GET_FIFO_INT() & 0x00ff0000) >> 16); + smc911x_tx(dev); + SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000); + SMC_ACK_INT(INT_STS_TSFL_); + SMC_ACK_INT(INT_STS_TSFL_ | INT_STS_GPT_INT_); + } +#else + if (status & INT_STS_TSFL_) { + DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq \n", dev->name, ); + smc911x_tx(dev); + SMC_ACK_INT(INT_STS_TSFL_); + } + + if (status & INT_STS_GPT_INT_) { + DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", + dev->name, + SMC_GET_IRQ_CFG(), + SMC_GET_FIFO_INT(), + SMC_GET_RX_CFG()); + DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x " + "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n", + dev->name, + (SMC_GET_RX_FIFO_INF() & 0x00ff0000) >> 16, + SMC_GET_RX_FIFO_INF() & 0xffff, + SMC_GET_RX_STS_FIFO_PEEK()); + SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000); + SMC_ACK_INT(INT_STS_GPT_INT_); + } +#endif + + /* Handle PHY interupt condition */ + if (status & INT_STS_PHY_INT_) { + DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name); + smc911x_phy_interrupt(dev); + SMC_ACK_INT(INT_STS_PHY_INT_); + } + } while (--timeout); + + /* restore mask state */ + SMC_SET_INT_EN(mask); + + DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n", + dev->name, 8-timeout); + + spin_unlock_irqrestore(&lp->lock, flags); + + DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout); + + return IRQ_HANDLED; +} + +#ifdef SMC_USE_DMA +static void +smc911x_tx_dma_irq(int dma, void *data, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)data; + struct smc911x_local *lp = netdev_priv(dev); + struct sk_buff *skb = lp->current_tx_skb; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name); + /* Clear the DMA interrupt sources */ + SMC_DMA_ACK_IRQ(dev, dma); + BUG_ON(skb == NULL); + dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE); + dev->trans_start = jiffies; + dev_kfree_skb_irq(skb); + lp->current_tx_skb = NULL; + if (lp->pending_tx_skb != NULL) + smc911x_hardware_send_pkt(dev); + else { + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, + "%s: No pending Tx packets. DMA disabled\n", dev->name); + spin_lock_irqsave(&lp->lock, flags); + lp->txdma_active = 0; + if (!lp->tx_throttle) { + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&lp->lock, flags); + } + + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, + "%s: TX DMA irq completed\n", dev->name); +} +static void +smc911x_rx_dma_irq(int dma, void *data, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)data; + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + struct sk_buff *skb = lp->current_rx_skb; + unsigned long flags; + unsigned int pkts; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name); + /* Clear the DMA interrupt sources */ + SMC_DMA_ACK_IRQ(dev, dma); + dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE); + BUG_ON(skb == NULL); + lp->current_rx_skb = NULL; + PRINT_PKT(skb->data, skb->len); + dev->last_rx = jiffies; + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + lp->stats.rx_packets++; + lp->stats.rx_bytes += skb->len; + + spin_lock_irqsave(&lp->lock, flags); + pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16; + if (pkts != 0) { + smc911x_rcv(dev); + }else { + lp->rxdma_active = 0; + } + spin_unlock_irqrestore(&lp->lock, flags); + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, + "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n", + dev->name, pkts); +} +#endif /* SMC_USE_DMA */ + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void smc911x_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + smc911x_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif + +/* Our watchdog timed out. Called by the networking layer */ +static void smc911x_timeout(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int status, mask; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + spin_lock_irqsave(&lp->lock, flags); + status = SMC_GET_INT(); + mask = SMC_GET_INT_EN(); + spin_unlock_irqrestore(&lp->lock, flags); + DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x \n", + dev->name, status, mask); + + /* Dump the current TX FIFO contents and restart */ + mask = SMC_GET_TX_CFG(); + SMC_SET_TX_CFG(mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); + /* + * Reconfiguring the PHY doesn't seem like a bad idea here, but + * smc911x_phy_configure() calls msleep() which calls schedule_timeout() + * which calls schedule(). Hence we use a work queue. + */ + if (lp->phy_type != 0) { + if (schedule_work(&lp->phy_configure)) { + lp->work_pending = 1; + } + } + + /* We can accept TX packets again */ + dev->trans_start = jiffies; + netif_wake_queue(dev); +} + +/* + * This routine will, depending on the values passed to it, + * either make it accept multicast packets, go into + * promiscuous mode (for TCPDUMP and cousins) or accept + * a select set of multicast packets + */ +static void smc911x_set_multicast_list(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned int multicast_table[2]; + unsigned int mcr, update_multicast = 0; + unsigned long flags; + /* table for flipping the order of 5 bits */ + static const unsigned char invert5[] = + {0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0C, 0x1C, + 0x02, 0x12, 0x0A, 0x1A, 0x06, 0x16, 0x0E, 0x1E, + 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0D, 0x1D, + 0x03, 0x13, 0x0B, 0x1B, 0x07, 0x17, 0x0F, 0x1F}; + + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CR(mcr); + spin_unlock_irqrestore(&lp->lock, flags); + + if (dev->flags & IFF_PROMISC) { + + DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name); + mcr |= MAC_CR_PRMS_; + } + /* + * Here, I am setting this to accept all multicast packets. + * I don't need to zero the multicast table, because the flag is + * checked before the table is + */ + else if (dev->flags & IFF_ALLMULTI || dev->mc_count > 16) { + DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name); + mcr |= MAC_CR_MCPAS_; + } + + /* + * This sets the internal hardware table to filter out unwanted + * multicast packets before they take up memory. + * + * The SMC chip uses a hash table where the high 6 bits of the CRC of + * address are the offset into the table. If that bit is 1, then the + * multicast packet is accepted. Otherwise, it's dropped silently. + * + * To use the 6 bits as an offset into the table, the high 1 bit is + * the number of the 32 bit register, while the low 5 bits are the bit + * within that register. + */ + else if (dev->mc_count) { + int i; + struct dev_mc_list *cur_addr; + + /* Set the Hash perfec mode */ + mcr |= MAC_CR_HPFILT_; + + /* start with a table of all zeros: reject all */ + memset(multicast_table, 0, sizeof(multicast_table)); + + cur_addr = dev->mc_list; + for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) { + int position; + + /* do we have a pointer here? */ + if (!cur_addr) + break; + /* make sure this is a multicast address - + shouldn't this be a given if we have it here ? */ + if (!(*cur_addr->dmi_addr & 1)) + continue; + + /* only use the low order bits */ + position = crc32_le(~0, cur_addr->dmi_addr, 6) & 0x3f; + + /* do some messy swapping to put the bit in the right spot */ + multicast_table[invert5[position&0x1F]&0x1] |= + (1<<invert5[(position>>1)&0x1F]); + } + + /* be sure I get rid of flags I might have set */ + mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); + + /* now, the table can be loaded into the chipset */ + update_multicast = 1; + } else { + DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n", + dev->name); + mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); + + /* + * since I'm disabling all multicast entirely, I need to + * clear the multicast list + */ + memset(multicast_table, 0, sizeof(multicast_table)); + update_multicast = 1; + } + + spin_lock_irqsave(&lp->lock, flags); + SMC_SET_MAC_CR(mcr); + if (update_multicast) { + DBG(SMC_DEBUG_MISC, + "%s: update mcast hash table 0x%08x 0x%08x\n", + dev->name, multicast_table[0], multicast_table[1]); + SMC_SET_HASHL(multicast_table[0]); + SMC_SET_HASHH(multicast_table[1]); + } + spin_unlock_irqrestore(&lp->lock, flags); +} + + +/* + * Open and Initialize the board + * + * Set up everything, reset the card, etc.. + */ +static int +smc911x_open(struct net_device *dev) +{ + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + /* + * Check that the address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx + */ + if (!is_valid_ether_addr(dev->dev_addr)) { + PRINTK("%s: no valid ethernet hw addr\n", __FUNCTION__); + return -EINVAL; + } + + /* reset the hardware */ + smc911x_reset(dev); + + /* Configure the PHY, initialize the link state */ + smc911x_phy_configure(dev); + + /* Turn on Tx + Rx */ + smc911x_enable(dev); + + netif_start_queue(dev); + + return 0; +} + +/* + * smc911x_close + * + * this makes the board clean up everything that it can + * and not talk to the outside world. Caused by + * an 'ifconfig ethX down' + */ +static int smc911x_close(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + netif_stop_queue(dev); + netif_carrier_off(dev); + + /* clear everything */ + smc911x_shutdown(dev); + + if (lp->phy_type != 0) { + /* We need to ensure that no calls to + * smc911x_phy_configure are pending. + + * flush_scheduled_work() cannot be called because we + * are running with the netlink semaphore held (from + * devinet_ioctl()) and the pending work queue + * contains linkwatch_event() (scheduled by + * netif_carrier_off() above). linkwatch_event() also + * wants the netlink semaphore. + */ + while (lp->work_pending) + schedule(); + smc911x_phy_powerdown(dev, lp->mii.phy_id); + } + + if (lp->pending_tx_skb) { + dev_kfree_skb(lp->pending_tx_skb); + lp->pending_tx_skb = NULL; + } + + return 0; +} + +/* + * Get the current statistics. + * This may be called with the card open or closed. + */ +static struct net_device_stats *smc911x_query_statistics(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + + return &lp->stats; +} + +/* + * Ethtool support + */ +static int +smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smc911x_local *lp = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + int ret, status; + unsigned long flags; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + cmd->maxtxpkt = 1; + cmd->maxrxpkt = 1; + + if (lp->phy_type != 0) { + spin_lock_irqsave(&lp->lock, flags); + ret = mii_ethtool_gset(&lp->mii, cmd); + spin_unlock_irqrestore(&lp->lock, flags); + } else { + cmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_TP | SUPPORTED_AUI; + + if (lp->ctl_rspeed == 10) + cmd->speed = SPEED_10; + else if (lp->ctl_rspeed == 100) + cmd->speed = SPEED_100; + + cmd->autoneg = AUTONEG_DISABLE; + if (lp->mii.phy_id==1) + cmd->transceiver = XCVR_INTERNAL; + else + cmd->transceiver = XCVR_EXTERNAL; + cmd->port = 0; + SMC_GET_PHY_SPECIAL(lp->mii.phy_id, status); + cmd->duplex = + (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? + DUPLEX_FULL : DUPLEX_HALF; + ret = 0; + } + + return ret; +} + +static int +smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret; + unsigned long flags; + + if (lp->phy_type != 0) { + spin_lock_irqsave(&lp->lock, flags); + ret = mii_ethtool_sset(&lp->mii, cmd); + spin_unlock_irqrestore(&lp->lock, flags); + } else { + if (cmd->autoneg != AUTONEG_DISABLE || + cmd->speed != SPEED_10 || + (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) || + (cmd->port != PORT_TP && cmd->port != PORT_AUI)) + return -EINVAL; + + lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL; + + ret = 0; + } + + return ret; +} + +static void +smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strncpy(info->driver, CARDNAME, sizeof(info->driver)); + strncpy(info->version, version, sizeof(info->version)); + strncpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info)); +} + +static int smc911x_ethtool_nwayreset(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + int ret = -EINVAL; + unsigned long flags; + + if (lp->phy_type != 0) { + spin_lock_irqsave(&lp->lock, flags); + ret = mii_nway_restart(&lp->mii); + spin_unlock_irqrestore(&lp->lock, flags); + } + + return ret; +} + +static u32 smc911x_ethtool_getmsglevel(struct net_device *dev) +{ + struct smc911x_local *lp = netdev_priv(dev); + return lp->msg_enable; +} + +static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) +{ + struct smc911x_local *lp = netdev_priv(dev); + lp->msg_enable = level; +} + +static int smc911x_ethtool_getregslen(struct net_device *dev) +{ + /* System regs + MAC regs + PHY regs */ + return (((E2P_CMD - ID_REV)/4 + 1) + + (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); +} + +static void smc911x_ethtool_getregs(struct net_device *dev, + struct ethtool_regs* regs, void *buf) +{ + unsigned long ioaddr = dev->base_addr; + struct smc911x_local *lp = netdev_priv(dev); + unsigned long flags; + u32 reg,i,j=0; + u32 *data = (u32*)buf; + + regs->version = lp->version; + for(i=ID_REV;i<=E2P_CMD;i+=4) { + data[j++] = SMC_inl(ioaddr,i); + } + for(i=MAC_CR;i<=WUCSR;i++) { + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MAC_CSR(i, reg); + spin_unlock_irqrestore(&lp->lock, flags); + data[j++] = reg; + } + for(i=0;i<=31;i++) { + spin_lock_irqsave(&lp->lock, flags); + SMC_GET_MII(i, lp->mii.phy_id, reg); + spin_unlock_irqrestore(&lp->lock, flags); + data[j++] = reg & 0xFFFF; + } +} + +static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev) +{ + unsigned long ioaddr = dev->base_addr; + unsigned int timeout; + int e2p_cmd; + + e2p_cmd = SMC_GET_E2P_CMD(); + for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) { + if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) { + PRINTK("%s: %s timeout waiting for EEPROM to respond\n", + dev->name, __FUNCTION__); + return -EFAULT; + } + mdelay(1); + e2p_cmd = SMC_GET_E2P_CMD(); + } + if (timeout == 0) { + PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n", + dev->name, __FUNCTION__); + return -ETIMEDOUT; + } + return 0; +} + +static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, + int cmd, int addr) +{ + unsigned long ioaddr = dev->base_addr; + int ret; + + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + return ret; + SMC_SET_E2P_CMD(E2P_CMD_EPC_BUSY_ | + ((cmd) & (0x7<<28)) | + ((addr) & 0xFF)); + return 0; +} + +static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, + u8 *data) +{ + unsigned long ioaddr = dev->base_addr; + int ret; + + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + return ret; + *data = SMC_GET_E2P_DATA(); + return 0; +} + +static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, + u8 data) +{ + unsigned long ioaddr = dev->base_addr; + int ret; + + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + return ret; + SMC_SET_E2P_DATA(data); + return 0; +} + +static int smc911x_ethtool_geteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + u8 eebuf[SMC911X_EEPROM_LEN]; + int i, ret; + + for(i=0;i<SMC911X_EEPROM_LEN;i++) { + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0) + return ret; + if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0) + return ret; + } + memcpy(data, eebuf+eeprom->offset, eeprom->len); + return 0; +} + +static int smc911x_ethtool_seteeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i, ret; + + /* Enable erase */ + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0) + return ret; + for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) { + /* erase byte */ + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0) + return ret; + /* write byte */ + if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0) + return ret; + if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0) + return ret; + } + return 0; +} + +static int smc911x_ethtool_geteeprom_len(struct net_device *dev) +{ + return SMC911X_EEPROM_LEN; +} + +static struct ethtool_ops smc911x_ethtool_ops = { + .get_settings = smc911x_ethtool_getsettings, + .set_settings = smc911x_ethtool_setsettings, + .get_drvinfo = smc911x_ethtool_getdrvinfo, + .get_msglevel = smc911x_ethtool_getmsglevel, + .set_msglevel = smc911x_ethtool_setmsglevel, + .nway_reset = smc911x_ethtool_nwayreset, + .get_link = ethtool_op_get_link, + .get_regs_len = smc911x_ethtool_getregslen, + .get_regs = smc911x_ethtool_getregs, + .get_eeprom_len = smc911x_ethtool_geteeprom_len, + .get_eeprom = smc911x_ethtool_geteeprom, + .set_eeprom = smc911x_ethtool_seteeprom, +}; + +/* + * smc911x_findirq + * + * This routine has a simple purpose -- make the SMC chip generate an + * interrupt, so an auto-detect routine can detect it, and find the IRQ, + */ +static int __init smc911x_findirq(unsigned long ioaddr) +{ + int timeout = 20; + unsigned long cookie; + + DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__); + + cookie = probe_irq_on(); + + /* + * Force a SW interrupt + */ + + SMC_SET_INT_EN(INT_EN_SW_INT_EN_); + + /* + * Wait until positive that the interrupt has been generated + */ + do { + int int_status; + udelay(10); + int_status = SMC_GET_INT_EN(); + if (int_status & INT_EN_SW_INT_EN_) + break; /* got the interrupt */ + } while (--timeout); + + /* + * there is really nothing that I can do here if timeout fails, + * as autoirq_report will return a 0 anyway, which is what I + * want in this case. Plus, the clean up is needed in both + * cases. + */ + + /* and disable all interrupts again */ + SMC_SET_INT_EN(0); + + /* and return what I found */ + return probe_irq_off(cookie); +} + +/* + * Function: smc911x_probe(unsigned long ioaddr) + * + * Purpose: + * Tests to see if a given ioaddr points to an SMC911x chip. + * Returns a 0 on success + * + * Algorithm: + * (1) see if the endian word is OK + * (1) see if I recognize the chip ID in the appropriate register + * + * Here I do typical initialization tasks. + * + * o Initialize the structure if needed + * o print out my vanity message if not done so already + * o print out what type of hardware is detected + * o print out the ethernet address + * o find the IRQ + * o set up my private data + * o configure the dev structure with my subroutines + * o actually GRAB the irq. + * o GRAB the region + */ +static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr) +{ + struct smc911x_local *lp = netdev_priv(dev); + int i, retval; + unsigned int val, chip_id, revision; + const char *version_string; + + DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__); + + /* First, see if the endian word is recognized */ + val = SMC_GET_BYTE_TEST(); + DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val); + if (val != 0x87654321) { + printk(KERN_ERR "Invalid chip endian 0x08%x\n",val); + retval = -ENODEV; + goto err_out; + } + + /* + * check if the revision register is something that I + * recognize. These might need to be added to later, + * as future revisions could be added. + */ + chip_id = SMC_GET_PN(); + DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id); + for(i=0;chip_ids[i].id != 0; i++) { + if (chip_ids[i].id == chip_id) break; + } + if (!chip_ids[i].id) { + printk(KERN_ERR "Unknown chip ID %04x\n", chip_id); + retval = -ENODEV; + goto err_out; + } + version_string = chip_ids[i].name; + + revision = SMC_GET_REV(); + DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision); + + /* At this point I'll assume that the chip is an SMC911x. */ + DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name); + + /* Validate the TX FIFO size requested */ + if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) { + printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb); + retval = -EINVAL; + goto err_out; + } + + /* fill in some of the fields */ + dev->base_addr = ioaddr; + lp->version = chip_ids[i].id; + lp->revision = revision; + lp->tx_fifo_kb = tx_fifo_kb; + /* Reverse calculate the RX FIFO size from the TX */ + lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512; + lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15; + + /* Set the automatic flow control values */ + switch(lp->tx_fifo_kb) { + /* + * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64 + * AFC_LO is AFC_HI/2 + * BACK_DUR is about 5uS*(AFC_LO) rounded down + */ + case 2:/* 13440 Rx Data Fifo Size */ + lp->afc_cfg=0x008C46AF;break; + case 3:/* 12480 Rx Data Fifo Size */ + lp->afc_cfg=0x0082419F;break; + case 4:/* 11520 Rx Data Fifo Size */ + lp->afc_cfg=0x00783C9F;break; + case 5:/* 10560 Rx Data Fifo Size */ + lp->afc_cfg=0x006E374F;break; + case 6:/* 9600 Rx Data Fifo Size */ + lp->afc_cfg=0x0064328F;break; + case 7:/* 8640 Rx Data Fifo Size */ + lp->afc_cfg=0x005A2D7F;break; + case 8:/* 7680 Rx Data Fifo Size */ + lp->afc_cfg=0x0050287F;break; + case 9:/* 6720 Rx Data Fifo Size */ + lp->afc_cfg=0x0046236F;break; + case 10:/* 5760 Rx Data Fifo Size */ + lp->afc_cfg=0x003C1E6F;break; + case 11:/* 4800 Rx Data Fifo Size */ + lp->afc_cfg=0x0032195F;break; + /* + * AFC_HI is ~1520 bytes less than RX Data Fifo Size + * AFC_LO is AFC_HI/2 + * BACK_DUR is about 5uS*(AFC_LO) rounded down + */ + case 12:/* 3840 Rx Data Fifo Size */ + lp->afc_cfg=0x0024124F;break; + case 13:/* 2880 Rx Data Fifo Size */ + lp->afc_cfg=0x0015073F;break; + case 14:/* 1920 Rx Data Fifo Size */ + lp->afc_cfg=0x0006032F;break; + default: + PRINTK("%s: ERROR -- no AFC_CFG setting found", + dev->name); + break; + } + + DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, + "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, + lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg); + + spin_lock_init(&lp->lock); + + /* Get the MAC address */ + SMC_GET_MAC_ADDR(dev->dev_addr); + + /* now, reset the chip, and put it into a known state */ + smc911x_reset(dev); + + /* + * If dev->irq is 0, then the device has to be banged on to see + * what the IRQ is. + * + * Specifying an IRQ is done with the assumption that the user knows + * what (s)he is doing. No checking is done!!!! + */ + if (dev->irq < 1) { + int trials; + + trials = 3; + while (trials--) { + dev->irq = smc911x_findirq(ioaddr); + if (dev->irq) + break; + /* kick the card and try again */ + smc911x_reset(dev); + } + } + if (dev->irq == 0) { + printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n", + dev->name); + retval = -ENODEV; + goto err_out; + } + dev->irq = irq_canonicalize(dev->irq); + + /* Fill in the fields of the device structure with ethernet values. */ + ether_setup(dev); + + dev->open = smc911x_open; + dev->stop = smc911x_close; + dev->hard_start_xmit = smc911x_hard_start_xmit; + dev->tx_timeout = smc911x_timeout; + dev->watchdog_timeo = msecs_to_jiffies(watchdog); + dev->get_stats = smc911x_query_statistics; + dev->set_multicast_list = smc911x_set_multicast_list; + dev->ethtool_ops = &smc911x_ethtool_ops; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = smc911x_poll_controller; +#endif + + INIT_WORK(&lp->phy_configure, smc911x_phy_configure, dev); + lp->mii.phy_id_mask = 0x1f; + lp->mii.reg_num_mask = 0x1f; + lp->mii.force_media = 0; + lp->mii.full_duplex = 0; + lp->mii.dev = dev; + lp->mii.mdio_read = smc911x_phy_read; + lp->mii.mdio_write = smc911x_phy_write; + + /* + * Locate the phy, if any. + */ + smc911x_phy_detect(dev); + + /* Set default parameters */ + lp->msg_enable = NETIF_MSG_LINK; + lp->ctl_rfduplx = 1; + lp->ctl_rspeed = 100; + + /* Grab the IRQ */ + retval = request_irq(dev->irq, &smc911x_interrupt, SA_SHIRQ, dev->name, dev); + if (retval) + goto err_out; + + set_irq_type(dev->irq, IRQT_FALLING); + +#ifdef SMC_USE_DMA + lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq); + lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq); + lp->rxdma_active = 0; + lp->txdma_active = 0; + dev->dma = lp->rxdma; +#endif + + retval = register_netdev(dev); + if (retval == 0) { + /* now, print out the card info, in a short format.. */ + printk("%s: %s (rev %d) at %#lx IRQ %d", + dev->name, version_string, lp->revision, + dev->base_addr, dev->irq); + +#ifdef SMC_USE_DMA + if (lp->rxdma != -1) + printk(" RXDMA %d ", lp->rxdma); + + if (lp->txdma != -1) + printk("TXDMA %d", lp->txdma); +#endif + printk("\n"); + if (!is_valid_ether_addr(dev->dev_addr)) { + printk("%s: Invalid ethernet MAC address. Please " + "set using ifconfig\n", dev->name); + } else { + /* Print the Ethernet address */ + printk("%s: Ethernet addr: ", dev->name); + for (i = 0; i < 5; i++) + printk("%2.2x:", dev->dev_addr[i]); + printk("%2.2x\n", dev->dev_addr[5]); + } + + if (lp->phy_type == 0) { + PRINTK("%s: No PHY found\n", dev->name); + } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) { + PRINTK("%s: LAN911x Internal PHY\n", dev->name); + } else { + PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type); + } + } + +err_out: +#ifdef SMC_USE_DMA + if (retval) { + if (lp->rxdma != -1) { + SMC_DMA_FREE(dev, lp->rxdma); + } + if (lp->txdma != -1) { + SMC_DMA_FREE(dev, lp->txdma); + } + } +#endif + return retval; +} + +/* + * smc911x_init(void) + * + * Output: + * 0 --> there is a device + * anything else, error + */ +static int smc911x_drv_probe(struct platform_device *pdev) +{ + struct net_device *ndev; + struct resource *res; + unsigned int *addr; + int ret; + + DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto out; + } + + /* + * Request the regions. + */ + if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) { + ret = -EBUSY; + goto out; + } + + ndev = alloc_etherdev(sizeof(struct smc911x_local)); + if (!ndev) { + printk("%s: could not allocate device.\n", CARDNAME); + ret = -ENOMEM; + goto release_1; + } + SET_MODULE_OWNER(ndev); + SET_NETDEV_DEV(ndev, &pdev->dev); + + ndev->dma = (unsigned char)-1; + ndev->irq = platform_get_irq(pdev, 0); + + addr = ioremap(res->start, SMC911X_IO_EXTENT); + if (!addr) { + ret = -ENOMEM; + goto release_both; + } + + platform_set_drvdata(pdev, ndev); + ret = smc911x_probe(ndev, (unsigned long)addr); + if (ret != 0) { + platform_set_drvdata(pdev, NULL); + iounmap(addr); +release_both: + free_netdev(ndev); +release_1: + release_mem_region(res->start, SMC911X_IO_EXTENT); +out: + printk("%s: not found (%d).\n", CARDNAME, ret); + } +#ifdef SMC_USE_DMA + else { + struct smc911x_local *lp = netdev_priv(ndev); + lp->physaddr = res->start; + lp->dev = &pdev->dev; + } +#endif + + return ret; +} + +static int smc911x_drv_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct resource *res; + + DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__); + platform_set_drvdata(pdev, NULL); + + unregister_netdev(ndev); + + free_irq(ndev->irq, ndev); + +#ifdef SMC_USE_DMA + { + struct smc911x_local *lp = netdev_priv(ndev); + if (lp->rxdma != -1) { + SMC_DMA_FREE(dev, lp->rxdma); + } + if (lp->txdma != -1) { + SMC_DMA_FREE(dev, lp->txdma); + } + } +#endif + iounmap((void *)ndev->base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, SMC911X_IO_EXTENT); + + free_netdev(ndev); + return 0; +} + +static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state) +{ + struct net_device *ndev = platform_get_drvdata(dev); + unsigned long ioaddr = ndev->base_addr; + + DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__); + if (ndev) { + if (netif_running(ndev)) { + netif_device_detach(ndev); + smc911x_shutdown(ndev); +#if POWER_DOWN + /* Set D2 - Energy detect only setting */ + SMC_SET_PMT_CTRL(2<<12); +#endif + } + } + return 0; +} + +static int smc911x_drv_resume(struct platform_device *dev) +{ + struct net_device *ndev = platform_get_drvdata(dev); + + DBG(SMC_DEBUG_FUNC, "--> %s\n", __FUNCTION__); + if (ndev) { + struct smc911x_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) { + smc911x_reset(ndev); + smc911x_enable(ndev); + if (lp->phy_type != 0) + smc911x_phy_configure(ndev); + netif_device_attach(ndev); + } + } + return 0; +} + +static struct platform_driver smc911x_driver = { + .probe = smc911x_drv_probe, + .remove = smc911x_drv_remove, + .suspend = smc911x_drv_suspend, + .resume = smc911x_drv_resume, + .driver = { + .name = CARDNAME, + }, +}; + +static int __init smc911x_init(void) +{ + return platform_driver_register(&smc911x_driver); +} + +static void __exit smc911x_cleanup(void) +{ + platform_driver_unregister(&smc911x_driver); +} + +module_init(smc911x_init); +module_exit(smc911x_cleanup); diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h new file mode 100644 index 00000000000..0779a228d5a --- /dev/null +++ b/drivers/net/smc911x.h @@ -0,0 +1,835 @@ +/*------------------------------------------------------------------------ + . smc911x.h - macros for SMSC's LAN911{5,6,7,8} single-chip Ethernet device. + . + . Copyright (C) 2005 Sensoria Corp. + . Derived from the unified SMC91x driver by Nicolas Pitre + . + . This program is free software; you can redistribute it and/or modify + . it under the terms of the GNU General Public License as published by + . the Free Software Foundation; either version 2 of the License, or + . (at your option) any later version. + . + . This program is distributed in the hope that it will be useful, + . but WITHOUT ANY WARRANTY; without even the implied warranty of + . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + . GNU General Public License for more details. + . + . You should have received a copy of the GNU General Public License + . along with this program; if not, write to the Free Software + . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + . + . Information contained in this file was obtained from the LAN9118 + . manual from SMC. To get a copy, if you really want one, you can find + . information under www.smsc.com. + . + . Authors + . Dustin McIntire <dustin@sensoria.com> + . + ---------------------------------------------------------------------------*/ +#ifndef _SMC911X_H_ +#define _SMC911X_H_ + +/* + * Use the DMA feature on PXA chips + */ +#ifdef CONFIG_ARCH_PXA + #define SMC_USE_PXA_DMA 1 + #define SMC_USE_16BIT 0 + #define SMC_USE_32BIT 1 +#endif + + +/* + * Define the bus width specific IO macros + */ + +#if SMC_USE_16BIT +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) \ + do{ \ + writel(v & 0xFFFF, (a) + (r)); \ + writel(v >> 16, (a) + (r) + 2); \ + } while (0) +#define SMC_insl(a, r, p, l) readsw((short*)((a) + (r)), p, l*2) +#define SMC_outsl(a, r, p, l) writesw((short*)((a) + (r)), p, l*2) + +#elif SMC_USE_32BIT +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((int*)((a) + (r)), p, l) +#define SMC_outsl(a, r, p, l) writesl((int*)((a) + (r)), p, l) + +#endif /* SMC_USE_16BIT */ + + + +#if SMC_USE_PXA_DMA +#define SMC_USE_DMA + +/* + * Define the request and free functions + * These are unfortunately architecture specific as no generic allocation + * mechanism exits + */ +#define SMC_DMA_REQUEST(dev, handler) \ + pxa_request_dma(dev->name, DMA_PRIO_LOW, handler, dev) + +#define SMC_DMA_FREE(dev, dma) \ + pxa_free_dma(dma) + +#define SMC_DMA_ACK_IRQ(dev, dma) \ +{ \ + if (DCSR(dma) & DCSR_BUSERR) { \ + printk("%s: DMA %d bus error!\n", dev->name, dma); \ + } \ + DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; \ +} + +/* + * Use a DMA for RX and TX packets. + */ +#include <linux/dma-mapping.h> +#include <asm/dma.h> +#include <asm/arch/pxa-regs.h> + +static dma_addr_t rx_dmabuf, tx_dmabuf; +static int rx_dmalen, tx_dmalen; + +#ifdef SMC_insl +#undef SMC_insl +#define SMC_insl(a, r, p, l) \ + smc_pxa_dma_insl(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l) + +static inline void +smc_pxa_dma_insl(struct device *dev, u_long ioaddr, u_long physaddr, + int reg, int dma, u_char *buf, int len) +{ + /* 64 bit alignment is required for memory to memory DMA */ + if ((long)buf & 4) { + *((u32 *)buf) = SMC_inl(ioaddr, reg); + buf += 4; + len--; + } + + len *= 4; + rx_dmabuf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE); + rx_dmalen = len; + DCSR(dma) = DCSR_NODESC; + DTADR(dma) = rx_dmabuf; + DSADR(dma) = physaddr + reg; + DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | + DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen)); + DCSR(dma) = DCSR_NODESC | DCSR_RUN; +} +#endif + +#ifdef SMC_insw +#undef SMC_insw +#define SMC_insw(a, r, p, l) \ + smc_pxa_dma_insw(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l) + +static inline void +smc_pxa_dma_insw(struct device *dev, u_long ioaddr, u_long physaddr, + int reg, int dma, u_char *buf, int len) +{ + /* 64 bit alignment is required for memory to memory DMA */ + while ((long)buf & 6) { + *((u16 *)buf) = SMC_inw(ioaddr, reg); + buf += 2; + len--; + } + + len *= 2; + rx_dmabuf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE); + rx_dmalen = len; + DCSR(dma) = DCSR_NODESC; + DTADR(dma) = rx_dmabuf; + DSADR(dma) = physaddr + reg; + DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | + DCMD_WIDTH2 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen)); + DCSR(dma) = DCSR_NODESC | DCSR_RUN; +} +#endif + +#ifdef SMC_outsl +#undef SMC_outsl +#define SMC_outsl(a, r, p, l) \ + smc_pxa_dma_outsl(lp->dev, a, lp->physaddr, r, lp->txdma, p, l) + +static inline void +smc_pxa_dma_outsl(struct device *dev, u_long ioaddr, u_long physaddr, + int reg, int dma, u_char *buf, int len) +{ + /* 64 bit alignment is required for memory to memory DMA */ + if ((long)buf & 4) { + SMC_outl(*((u32 *)buf), ioaddr, reg); + buf += 4; + len--; + } + + len *= 4; + tx_dmabuf = dma_map_single(dev, buf, len, DMA_TO_DEVICE); + tx_dmalen = len; + DCSR(dma) = DCSR_NODESC; + DSADR(dma) = tx_dmabuf; + DTADR(dma) = physaddr + reg; + DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 | + DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen)); + DCSR(dma) = DCSR_NODESC | DCSR_RUN; +} +#endif + +#ifdef SMC_outsw +#undef SMC_outsw +#define SMC_outsw(a, r, p, l) \ + smc_pxa_dma_outsw(lp->dev, a, lp->physaddr, r, lp->txdma, p, l) + +static inline void +smc_pxa_dma_outsw(struct device *dev, u_long ioaddr, u_long physaddr, + int reg, int dma, u_char *buf, int len) +{ + /* 64 bit alignment is required for memory to memory DMA */ + while ((long)buf & 6) { + SMC_outw(*((u16 *)buf), ioaddr, reg); + buf += 2; + len--; + } + + len *= 2; + tx_dmabuf = dma_map_single(dev, buf, len, DMA_TO_DEVICE); + tx_dmalen = len; + DCSR(dma) = DCSR_NODESC; + DSADR(dma) = tx_dmabuf; + DTADR(dma) = physaddr + reg; + DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 | + DCMD_WIDTH2 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen)); + DCSR(dma) = DCSR_NODESC | DCSR_RUN; +} +#endif + +#endif /* SMC_USE_PXA_DMA */ + + +/* Chip Parameters and Register Definitions */ + +#define SMC911X_TX_FIFO_LOW_THRESHOLD (1536*2) + +#define SMC911X_IO_EXTENT 0x100 + +#define SMC911X_EEPROM_LEN 7 + +/* Below are the register offsets and bit definitions + * of the Lan911x memory space + */ +#define RX_DATA_FIFO (0x00) + +#define TX_DATA_FIFO (0x20) +#define TX_CMD_A_INT_ON_COMP_ (0x80000000) +#define TX_CMD_A_INT_BUF_END_ALGN_ (0x03000000) +#define TX_CMD_A_INT_4_BYTE_ALGN_ (0x00000000) +#define TX_CMD_A_INT_16_BYTE_ALGN_ (0x01000000) +#define TX_CMD_A_INT_32_BYTE_ALGN_ (0x02000000) +#define TX_CMD_A_INT_DATA_OFFSET_ (0x001F0000) +#define TX_CMD_A_INT_FIRST_SEG_ (0x00002000) +#define TX_CMD_A_INT_LAST_SEG_ (0x00001000) +#define TX_CMD_A_BUF_SIZE_ (0x000007FF) +#define TX_CMD_B_PKT_TAG_ (0xFFFF0000) +#define TX_CMD_B_ADD_CRC_DISABLE_ (0x00002000) +#define TX_CMD_B_DISABLE_PADDING_ (0x00001000) +#define TX_CMD_B_PKT_BYTE_LENGTH_ (0x000007FF) + +#define RX_STATUS_FIFO (0x40) +#define RX_STS_PKT_LEN_ (0x3FFF0000) +#define RX_STS_ES_ (0x00008000) +#define RX_STS_BCST_ (0x00002000) +#define RX_STS_LEN_ERR_ (0x00001000) +#define RX_STS_RUNT_ERR_ (0x00000800) +#define RX_STS_MCAST_ (0x00000400) +#define RX_STS_TOO_LONG_ (0x00000080) +#define RX_STS_COLL_ (0x00000040) +#define RX_STS_ETH_TYPE_ (0x00000020) +#define RX_STS_WDOG_TMT_ (0x00000010) +#define RX_STS_MII_ERR_ (0x00000008) +#define RX_STS_DRIBBLING_ (0x00000004) +#define RX_STS_CRC_ERR_ (0x00000002) +#define RX_STATUS_FIFO_PEEK (0x44) +#define TX_STATUS_FIFO (0x48) +#define TX_STS_TAG_ (0xFFFF0000) +#define TX_STS_ES_ (0x00008000) +#define TX_STS_LOC_ (0x00000800) +#define TX_STS_NO_CARR_ (0x00000400) +#define TX_STS_LATE_COLL_ (0x00000200) +#define TX_STS_MANY_COLL_ (0x00000100) +#define TX_STS_COLL_CNT_ (0x00000078) +#define TX_STS_MANY_DEFER_ (0x00000004) +#define TX_STS_UNDERRUN_ (0x00000002) +#define TX_STS_DEFERRED_ (0x00000001) +#define TX_STATUS_FIFO_PEEK (0x4C) +#define ID_REV (0x50) +#define ID_REV_CHIP_ID_ (0xFFFF0000) /* RO */ +#define ID_REV_REV_ID_ (0x0000FFFF) /* RO */ + +#define INT_CFG (0x54) +#define INT_CFG_INT_DEAS_ (0xFF000000) /* R/W */ +#define INT_CFG_INT_DEAS_CLR_ (0x00004000) +#define INT_CFG_INT_DEAS_STS_ (0x00002000) +#define INT_CFG_IRQ_INT_ (0x00001000) /* RO */ +#define INT_CFG_IRQ_EN_ (0x00000100) /* R/W */ +#define INT_CFG_IRQ_POL_ (0x00000010) /* R/W Not Affected by SW Reset */ +#define INT_CFG_IRQ_TYPE_ (0x00000001) /* R/W Not Affected by SW Reset */ + +#define INT_STS (0x58) +#define INT_STS_SW_INT_ (0x80000000) /* R/WC */ +#define INT_STS_TXSTOP_INT_ (0x02000000) /* R/WC */ +#define INT_STS_RXSTOP_INT_ (0x01000000) /* R/WC */ +#define INT_STS_RXDFH_INT_ (0x00800000) /* R/WC */ +#define INT_STS_RXDF_INT_ (0x00400000) /* R/WC */ +#define INT_STS_TX_IOC_ (0x00200000) /* R/WC */ +#define INT_STS_RXD_INT_ (0x00100000) /* R/WC */ +#define INT_STS_GPT_INT_ (0x00080000) /* R/WC */ +#define INT_STS_PHY_INT_ (0x00040000) /* RO */ +#define INT_STS_PME_INT_ (0x00020000) /* R/WC */ +#define INT_STS_TXSO_ (0x00010000) /* R/WC */ +#define INT_STS_RWT_ (0x00008000) /* R/WC */ +#define INT_STS_RXE_ (0x00004000) /* R/WC */ +#define INT_STS_TXE_ (0x00002000) /* R/WC */ +//#define INT_STS_ERX_ (0x00001000) /* R/WC */ +#define INT_STS_TDFU_ (0x00000800) /* R/WC */ +#define INT_STS_TDFO_ (0x00000400) /* R/WC */ +#define INT_STS_TDFA_ (0x00000200) /* R/WC */ +#define INT_STS_TSFF_ (0x00000100) /* R/WC */ +#define INT_STS_TSFL_ (0x00000080) /* R/WC */ +//#define INT_STS_RXDF_ (0x00000040) /* R/WC */ +#define INT_STS_RDFO_ (0x00000040) /* R/WC */ +#define INT_STS_RDFL_ (0x00000020) /* R/WC */ +#define INT_STS_RSFF_ (0x00000010) /* R/WC */ +#define INT_STS_RSFL_ (0x00000008) /* R/WC */ +#define INT_STS_GPIO2_INT_ (0x00000004) /* R/WC */ +#define INT_STS_GPIO1_INT_ (0x00000002) /* R/WC */ +#define INT_STS_GPIO0_INT_ (0x00000001) /* R/WC */ + +#define INT_EN (0x5C) +#define INT_EN_SW_INT_EN_ (0x80000000) /* R/W */ +#define INT_EN_TXSTOP_INT_EN_ (0x02000000) /* R/W */ +#define INT_EN_RXSTOP_INT_EN_ (0x01000000) /* R/W */ +#define INT_EN_RXDFH_INT_EN_ (0x00800000) /* R/W */ +//#define INT_EN_RXDF_INT_EN_ (0x00400000) /* R/W */ +#define INT_EN_TIOC_INT_EN_ (0x00200000) /* R/W */ +#define INT_EN_RXD_INT_EN_ (0x00100000) /* R/W */ +#define INT_EN_GPT_INT_EN_ (0x00080000) /* R/W */ +#define INT_EN_PHY_INT_EN_ (0x00040000) /* R/W */ +#define INT_EN_PME_INT_EN_ (0x00020000) /* R/W */ +#define INT_EN_TXSO_EN_ (0x00010000) /* R/W */ +#define INT_EN_RWT_EN_ (0x00008000) /* R/W */ +#define INT_EN_RXE_EN_ (0x00004000) /* R/W */ +#define INT_EN_TXE_EN_ (0x00002000) /* R/W */ +//#define INT_EN_ERX_EN_ (0x00001000) /* R/W */ +#define INT_EN_TDFU_EN_ (0x00000800) /* R/W */ +#define INT_EN_TDFO_EN_ (0x00000400) /* R/W */ +#define INT_EN_TDFA_EN_ (0x00000200) /* R/W */ +#define INT_EN_TSFF_EN_ (0x00000100) /* R/W */ +#define INT_EN_TSFL_EN_ (0x00000080) /* R/W */ +//#define INT_EN_RXDF_EN_ (0x00000040) /* R/W */ +#define INT_EN_RDFO_EN_ (0x00000040) /* R/W */ +#define INT_EN_RDFL_EN_ (0x00000020) /* R/W */ +#define INT_EN_RSFF_EN_ (0x00000010) /* R/W */ +#define INT_EN_RSFL_EN_ (0x00000008) /* R/W */ +#define INT_EN_GPIO2_INT_ (0x00000004) /* R/W */ +#define INT_EN_GPIO1_INT_ (0x00000002) /* R/W */ +#define INT_EN_GPIO0_INT_ (0x00000001) /* R/W */ + +#define BYTE_TEST (0x64) +#define FIFO_INT (0x68) +#define FIFO_INT_TX_AVAIL_LEVEL_ (0xFF000000) /* R/W */ +#define FIFO_INT_TX_STS_LEVEL_ (0x00FF0000) /* R/W */ +#define FIFO_INT_RX_AVAIL_LEVEL_ (0x0000FF00) /* R/W */ +#define FIFO_INT_RX_STS_LEVEL_ (0x000000FF) /* R/W */ + +#define RX_CFG (0x6C) +#define RX_CFG_RX_END_ALGN_ (0xC0000000) /* R/W */ +#define RX_CFG_RX_END_ALGN4_ (0x00000000) /* R/W */ +#define RX_CFG_RX_END_ALGN16_ (0x40000000) /* R/W */ +#define RX_CFG_RX_END_ALGN32_ (0x80000000) /* R/W */ +#define RX_CFG_RX_DMA_CNT_ (0x0FFF0000) /* R/W */ +#define RX_CFG_RX_DUMP_ (0x00008000) /* R/W */ +#define RX_CFG_RXDOFF_ (0x00001F00) /* R/W */ +//#define RX_CFG_RXBAD_ (0x00000001) /* R/W */ + +#define TX_CFG (0x70) +//#define TX_CFG_TX_DMA_LVL_ (0xE0000000) /* R/W */ +//#define TX_CFG_TX_DMA_CNT_ (0x0FFF0000) /* R/W Self Clearing */ +#define TX_CFG_TXS_DUMP_ (0x00008000) /* Self Clearing */ +#define TX_CFG_TXD_DUMP_ (0x00004000) /* Self Clearing */ +#define TX_CFG_TXSAO_ (0x00000004) /* R/W */ +#define TX_CFG_TX_ON_ (0x00000002) /* R/W */ +#define TX_CFG_STOP_TX_ (0x00000001) /* Self Clearing */ + +#define HW_CFG (0x74) +#define HW_CFG_TTM_ (0x00200000) /* R/W */ +#define HW_CFG_SF_ (0x00100000) /* R/W */ +#define HW_CFG_TX_FIF_SZ_ (0x000F0000) /* R/W */ +#define HW_CFG_TR_ (0x00003000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_ (0x00000060) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_INT_PHY_ (0x00000000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_EXT_PHY_ (0x00000020) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_CLK_DIS_ (0x00000040) /* R/W */ +#define HW_CFG_SMI_SEL_ (0x00000010) /* R/W */ +#define HW_CFG_EXT_PHY_DET_ (0x00000008) /* RO */ +#define HW_CFG_EXT_PHY_EN_ (0x00000004) /* R/W */ +#define HW_CFG_32_16_BIT_MODE_ (0x00000004) /* RO */ +#define HW_CFG_SRST_TO_ (0x00000002) /* RO */ +#define HW_CFG_SRST_ (0x00000001) /* Self Clearing */ + +#define RX_DP_CTRL (0x78) +#define RX_DP_CTRL_RX_FFWD_ (0x80000000) /* R/W */ +#define RX_DP_CTRL_FFWD_BUSY_ (0x80000000) /* RO */ + +#define RX_FIFO_INF (0x7C) +#define RX_FIFO_INF_RXSUSED_ (0x00FF0000) /* RO */ +#define RX_FIFO_INF_RXDUSED_ (0x0000FFFF) /* RO */ + +#define TX_FIFO_INF (0x80) +#define TX_FIFO_INF_TSUSED_ (0x00FF0000) /* RO */ +#define TX_FIFO_INF_TDFREE_ (0x0000FFFF) /* RO */ + +#define PMT_CTRL (0x84) +#define PMT_CTRL_PM_MODE_ (0x00003000) /* Self Clearing */ +#define PMT_CTRL_PHY_RST_ (0x00000400) /* Self Clearing */ +#define PMT_CTRL_WOL_EN_ (0x00000200) /* R/W */ +#define PMT_CTRL_ED_EN_ (0x00000100) /* R/W */ +#define PMT_CTRL_PME_TYPE_ (0x00000040) /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_WUPS_ (0x00000030) /* R/WC */ +#define PMT_CTRL_WUPS_NOWAKE_ (0x00000000) /* R/WC */ +#define PMT_CTRL_WUPS_ED_ (0x00000010) /* R/WC */ +#define PMT_CTRL_WUPS_WOL_ (0x00000020) /* R/WC */ +#define PMT_CTRL_WUPS_MULTI_ (0x00000030) /* R/WC */ +#define PMT_CTRL_PME_IND_ (0x00000008) /* R/W */ +#define PMT_CTRL_PME_POL_ (0x00000004) /* R/W */ +#define PMT_CTRL_PME_EN_ (0x00000002) /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_READY_ (0x00000001) /* RO */ + +#define GPIO_CFG (0x88) +#define GPIO_CFG_LED3_EN_ (0x40000000) /* R/W */ +#define GPIO_CFG_LED2_EN_ (0x20000000) /* R/W */ +#define GPIO_CFG_LED1_EN_ (0x10000000) /* R/W */ +#define GPIO_CFG_GPIO2_INT_POL_ (0x04000000) /* R/W */ +#define GPIO_CFG_GPIO1_INT_POL_ (0x02000000) /* R/W */ +#define GPIO_CFG_GPIO0_INT_POL_ (0x01000000) /* R/W */ +#define GPIO_CFG_EEPR_EN_ (0x00700000) /* R/W */ +#define GPIO_CFG_GPIOBUF2_ (0x00040000) /* R/W */ +#define GPIO_CFG_GPIOBUF1_ (0x00020000) /* R/W */ +#define GPIO_CFG_GPIOBUF0_ (0x00010000) /* R/W */ +#define GPIO_CFG_GPIODIR2_ (0x00000400) /* R/W */ +#define GPIO_CFG_GPIODIR1_ (0x00000200) /* R/W */ +#define GPIO_CFG_GPIODIR0_ (0x00000100) /* R/W */ +#define GPIO_CFG_GPIOD4_ (0x00000010) /* R/W */ +#define GPIO_CFG_GPIOD3_ (0x00000008) /* R/W */ +#define GPIO_CFG_GPIOD2_ (0x00000004) /* R/W */ +#define GPIO_CFG_GPIOD1_ (0x00000002) /* R/W */ +#define GPIO_CFG_GPIOD0_ (0x00000001) /* R/W */ + +#define GPT_CFG (0x8C) +#define GPT_CFG_TIMER_EN_ (0x20000000) /* R/W */ +#define GPT_CFG_GPT_LOAD_ (0x0000FFFF) /* R/W */ + +#define GPT_CNT (0x90) +#define GPT_CNT_GPT_CNT_ (0x0000FFFF) /* RO */ + +#define ENDIAN (0x98) +#define FREE_RUN (0x9C) +#define RX_DROP (0xA0) +#define MAC_CSR_CMD (0xA4) +#define MAC_CSR_CMD_CSR_BUSY_ (0x80000000) /* Self Clearing */ +#define MAC_CSR_CMD_R_NOT_W_ (0x40000000) /* R/W */ +#define MAC_CSR_CMD_CSR_ADDR_ (0x000000FF) /* R/W */ + +#define MAC_CSR_DATA (0xA8) +#define AFC_CFG (0xAC) +#define AFC_CFG_AFC_HI_ (0x00FF0000) /* R/W */ +#define AFC_CFG_AFC_LO_ (0x0000FF00) /* R/W */ +#define AFC_CFG_BACK_DUR_ (0x000000F0) /* R/W */ +#define AFC_CFG_FCMULT_ (0x00000008) /* R/W */ +#define AFC_CFG_FCBRD_ (0x00000004) /* R/W */ +#define AFC_CFG_FCADD_ (0x00000002) /* R/W */ +#define AFC_CFG_FCANY_ (0x00000001) /* R/W */ + +#define E2P_CMD (0xB0) +#define E2P_CMD_EPC_BUSY_ (0x80000000) /* Self Clearing */ +#define E2P_CMD_EPC_CMD_ (0x70000000) /* R/W */ +#define E2P_CMD_EPC_CMD_READ_ (0x00000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWDS_ (0x10000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWEN_ (0x20000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRITE_ (0x30000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRAL_ (0x40000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERASE_ (0x50000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERAL_ (0x60000000) /* R/W */ +#define E2P_CMD_EPC_CMD_RELOAD_ (0x70000000) /* R/W */ +#define E2P_CMD_EPC_TIMEOUT_ (0x00000200) /* RO */ +#define E2P_CMD_MAC_ADDR_LOADED_ (0x00000100) /* RO */ +#define E2P_CMD_EPC_ADDR_ (0x000000FF) /* R/W */ + +#define E2P_DATA (0xB4) +#define E2P_DATA_EEPROM_DATA_ (0x000000FF) /* R/W */ +/* end of LAN register offsets and bit definitions */ + +/* + **************************************************************************** + **************************************************************************** + * MAC Control and Status Register (Indirect Address) + * Offset (through the MAC_CSR CMD and DATA port) + **************************************************************************** + **************************************************************************** + * + */ +#define MAC_CR (0x01) /* R/W */ + +/* MAC_CR - MAC Control Register */ +#define MAC_CR_RXALL_ (0x80000000) +// TODO: delete this bit? It is not described in the data sheet. +#define MAC_CR_HBDIS_ (0x10000000) +#define MAC_CR_RCVOWN_ (0x00800000) +#define MAC_CR_LOOPBK_ (0x00200000) +#define MAC_CR_FDPX_ (0x00100000) +#define MAC_CR_MCPAS_ (0x00080000) +#define MAC_CR_PRMS_ (0x00040000) +#define MAC_CR_INVFILT_ (0x00020000) +#define MAC_CR_PASSBAD_ (0x00010000) +#define MAC_CR_HFILT_ (0x00008000) +#define MAC_CR_HPFILT_ (0x00002000) +#define MAC_CR_LCOLL_ (0x00001000) +#define MAC_CR_BCAST_ (0x00000800) +#define MAC_CR_DISRTY_ (0x00000400) +#define MAC_CR_PADSTR_ (0x00000100) +#define MAC_CR_BOLMT_MASK_ (0x000000C0) +#define MAC_CR_DFCHK_ (0x00000020) +#define MAC_CR_TXEN_ (0x00000008) +#define MAC_CR_RXEN_ (0x00000004) + +#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ +#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ +#define HASHH (0x04) /* R/W */ +#define HASHL (0x05) /* R/W */ + +#define MII_ACC (0x06) /* R/W */ +#define MII_ACC_PHY_ADDR_ (0x0000F800) +#define MII_ACC_MIIRINDA_ (0x000007C0) +#define MII_ACC_MII_WRITE_ (0x00000002) +#define MII_ACC_MII_BUSY_ (0x00000001) + +#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ + +#define FLOW (0x08) /* R/W */ +#define FLOW_FCPT_ (0xFFFF0000) +#define FLOW_FCPASS_ (0x00000004) +#define FLOW_FCEN_ (0x00000002) +#define FLOW_FCBSY_ (0x00000001) + +#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ +#define VLAN1_VTI1_ (0x0000ffff) + +#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ +#define VLAN2_VTI2_ (0x0000ffff) + +#define WUFF (0x0B) /* WO */ + +#define WUCSR (0x0C) /* R/W */ +#define WUCSR_GUE_ (0x00000200) +#define WUCSR_WUFR_ (0x00000040) +#define WUCSR_MPR_ (0x00000020) +#define WUCSR_WAKE_EN_ (0x00000004) +#define WUCSR_MPEN_ (0x00000002) + +/* + **************************************************************************** + * Chip Specific MII Defines + **************************************************************************** + * + * Phy register offsets and bit definitions + * + */ + +#define PHY_MODE_CTRL_STS ((u32)17) /* Mode Control/Status Register */ +//#define MODE_CTRL_STS_FASTRIP_ ((u16)0x4000) +#define MODE_CTRL_STS_EDPWRDOWN_ ((u16)0x2000) +//#define MODE_CTRL_STS_LOWSQEN_ ((u16)0x0800) +//#define MODE_CTRL_STS_MDPREBP_ ((u16)0x0400) +//#define MODE_CTRL_STS_FARLOOPBACK_ ((u16)0x0200) +//#define MODE_CTRL_STS_FASTEST_ ((u16)0x0100) +//#define MODE_CTRL_STS_REFCLKEN_ ((u16)0x0010) +//#define MODE_CTRL_STS_PHYADBP_ ((u16)0x0008) +//#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004) +#define MODE_CTRL_STS_ENERGYON_ ((u16)0x0002) + +#define PHY_INT_SRC ((u32)29) +#define PHY_INT_SRC_ENERGY_ON_ ((u16)0x0080) +#define PHY_INT_SRC_ANEG_COMP_ ((u16)0x0040) +#define PHY_INT_SRC_REMOTE_FAULT_ ((u16)0x0020) +#define PHY_INT_SRC_LINK_DOWN_ ((u16)0x0010) +#define PHY_INT_SRC_ANEG_LP_ACK_ ((u16)0x0008) +#define PHY_INT_SRC_PAR_DET_FAULT_ ((u16)0x0004) +#define PHY_INT_SRC_ANEG_PGRX_ ((u16)0x0002) + +#define PHY_INT_MASK ((u32)30) +#define PHY_INT_MASK_ENERGY_ON_ ((u16)0x0080) +#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040) +#define PHY_INT_MASK_REMOTE_FAULT_ ((u16)0x0020) +#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010) +#define PHY_INT_MASK_ANEG_LP_ACK_ ((u16)0x0008) +#define PHY_INT_MASK_PAR_DET_FAULT_ ((u16)0x0004) +#define PHY_INT_MASK_ANEG_PGRX_ ((u16)0x0002) + +#define PHY_SPECIAL ((u32)31) +#define PHY_SPECIAL_ANEG_DONE_ ((u16)0x1000) +#define PHY_SPECIAL_RES_ ((u16)0x0040) +#define PHY_SPECIAL_RES_MASK_ ((u16)0x0FE1) +#define PHY_SPECIAL_SPD_ ((u16)0x001C) +#define PHY_SPECIAL_SPD_10HALF_ ((u16)0x0004) +#define PHY_SPECIAL_SPD_10FULL_ ((u16)0x0014) +#define PHY_SPECIAL_SPD_100HALF_ ((u16)0x0008) +#define PHY_SPECIAL_SPD_100FULL_ ((u16)0x0018) + +#define LAN911X_INTERNAL_PHY_ID (0x0007C000) + +/* Chip ID values */ +#define CHIP_9115 0x115 +#define CHIP_9116 0x116 +#define CHIP_9117 0x117 +#define CHIP_9118 0x118 + +struct chip_id { + u16 id; + char *name; +}; + +static const struct chip_id chip_ids[] = { + { CHIP_9115, "LAN9115" }, + { CHIP_9116, "LAN9116" }, + { CHIP_9117, "LAN9117" }, + { CHIP_9118, "LAN9118" }, + { 0, NULL }, +}; + +#define IS_REV_A(x) ((x & 0xFFFF)==0) + +/* + * Macros to abstract register access according to the data bus + * capabilities. Please use those and not the in/out primitives. + */ +/* FIFO read/write macros */ +#define SMC_PUSH_DATA(p, l) SMC_outsl( ioaddr, TX_DATA_FIFO, p, (l) >> 2 ) +#define SMC_PULL_DATA(p, l) SMC_insl ( ioaddr, RX_DATA_FIFO, p, (l) >> 2 ) +#define SMC_SET_TX_FIFO(x) SMC_outl( x, ioaddr, TX_DATA_FIFO ) +#define SMC_GET_RX_FIFO() SMC_inl( ioaddr, RX_DATA_FIFO ) + + +/* I/O mapped register read/write macros */ +#define SMC_GET_TX_STS_FIFO() SMC_inl( ioaddr, TX_STATUS_FIFO ) +#define SMC_GET_RX_STS_FIFO() SMC_inl( ioaddr, RX_STATUS_FIFO ) +#define SMC_GET_RX_STS_FIFO_PEEK() SMC_inl( ioaddr, RX_STATUS_FIFO_PEEK ) +#define SMC_GET_PN() (SMC_inl( ioaddr, ID_REV ) >> 16) +#define SMC_GET_REV() (SMC_inl( ioaddr, ID_REV ) & 0xFFFF) +#define SMC_GET_IRQ_CFG() SMC_inl( ioaddr, INT_CFG ) +#define SMC_SET_IRQ_CFG(x) SMC_outl( x, ioaddr, INT_CFG ) +#define SMC_GET_INT() SMC_inl( ioaddr, INT_STS ) +#define SMC_ACK_INT(x) SMC_outl( x, ioaddr, INT_STS ) +#define SMC_GET_INT_EN() SMC_inl( ioaddr, INT_EN ) +#define SMC_SET_INT_EN(x) SMC_outl( x, ioaddr, INT_EN ) +#define SMC_GET_BYTE_TEST() SMC_inl( ioaddr, BYTE_TEST ) +#define SMC_SET_BYTE_TEST(x) SMC_outl( x, ioaddr, BYTE_TEST ) +#define SMC_GET_FIFO_INT() SMC_inl( ioaddr, FIFO_INT ) +#define SMC_SET_FIFO_INT(x) SMC_outl( x, ioaddr, FIFO_INT ) +#define SMC_SET_FIFO_TDA(x) \ + do { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_GET_FIFO_INT() & ~(0xFF<<24); \ + SMC_SET_FIFO_INT( __mask | (x)<<24 ); \ + local_irq_restore(__flags); \ + } while (0) +#define SMC_SET_FIFO_TSL(x) \ + do { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_GET_FIFO_INT() & ~(0xFF<<16); \ + SMC_SET_FIFO_INT( __mask | (((x) & 0xFF)<<16)); \ + local_irq_restore(__flags); \ + } while (0) +#define SMC_SET_FIFO_RSA(x) \ + do { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_GET_FIFO_INT() & ~(0xFF<<8); \ + SMC_SET_FIFO_INT( __mask | (((x) & 0xFF)<<8)); \ + local_irq_restore(__flags); \ + } while (0) +#define SMC_SET_FIFO_RSL(x) \ + do { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_GET_FIFO_INT() & ~0xFF; \ + SMC_SET_FIFO_INT( __mask | ((x) & 0xFF)); \ + local_irq_restore(__flags); \ + } while (0) +#define SMC_GET_RX_CFG() SMC_inl( ioaddr, RX_CFG ) +#define SMC_SET_RX_CFG(x) SMC_outl( x, ioaddr, RX_CFG ) +#define SMC_GET_TX_CFG() SMC_inl( ioaddr, TX_CFG ) +#define SMC_SET_TX_CFG(x) SMC_outl( x, ioaddr, TX_CFG ) +#define SMC_GET_HW_CFG() SMC_inl( ioaddr, HW_CFG ) +#define SMC_SET_HW_CFG(x) SMC_outl( x, ioaddr, HW_CFG ) +#define SMC_GET_RX_DP_CTRL() SMC_inl( ioaddr, RX_DP_CTRL ) +#define SMC_SET_RX_DP_CTRL(x) SMC_outl( x, ioaddr, RX_DP_CTRL ) +#define SMC_GET_PMT_CTRL() SMC_inl( ioaddr, PMT_CTRL ) +#define SMC_SET_PMT_CTRL(x) SMC_outl( x, ioaddr, PMT_CTRL ) +#define SMC_GET_GPIO_CFG() SMC_inl( ioaddr, GPIO_CFG ) +#define SMC_SET_GPIO_CFG(x) SMC_outl( x, ioaddr, GPIO_CFG ) +#define SMC_GET_RX_FIFO_INF() SMC_inl( ioaddr, RX_FIFO_INF ) +#define SMC_SET_RX_FIFO_INF(x) SMC_outl( x, ioaddr, RX_FIFO_INF ) +#define SMC_GET_TX_FIFO_INF() SMC_inl( ioaddr, TX_FIFO_INF ) +#define SMC_SET_TX_FIFO_INF(x) SMC_outl( x, ioaddr, TX_FIFO_INF ) +#define SMC_GET_GPT_CFG() SMC_inl( ioaddr, GPT_CFG ) +#define SMC_SET_GPT_CFG(x) SMC_outl( x, ioaddr, GPT_CFG ) +#define SMC_GET_RX_DROP() SMC_inl( ioaddr, RX_DROP ) +#define SMC_SET_RX_DROP(x) SMC_outl( x, ioaddr, RX_DROP ) +#define SMC_GET_MAC_CMD() SMC_inl( ioaddr, MAC_CSR_CMD ) +#define SMC_SET_MAC_CMD(x) SMC_outl( x, ioaddr, MAC_CSR_CMD ) +#define SMC_GET_MAC_DATA() SMC_inl( ioaddr, MAC_CSR_DATA ) +#define SMC_SET_MAC_DATA(x) SMC_outl( x, ioaddr, MAC_CSR_DATA ) +#define SMC_GET_AFC_CFG() SMC_inl( ioaddr, AFC_CFG ) +#define SMC_SET_AFC_CFG(x) SMC_outl( x, ioaddr, AFC_CFG ) +#define SMC_GET_E2P_CMD() SMC_inl( ioaddr, E2P_CMD ) +#define SMC_SET_E2P_CMD(x) SMC_outl( x, ioaddr, E2P_CMD ) +#define SMC_GET_E2P_DATA() SMC_inl( ioaddr, E2P_DATA ) +#define SMC_SET_E2P_DATA(x) SMC_outl( x, ioaddr, E2P_DATA ) + +/* MAC register read/write macros */ +#define SMC_GET_MAC_CSR(a,v) \ + do { \ + while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \ + SMC_SET_MAC_CMD(MAC_CSR_CMD_CSR_BUSY_ | \ + MAC_CSR_CMD_R_NOT_W_ | (a) ); \ + while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \ + v = SMC_GET_MAC_DATA(); \ + } while (0) +#define SMC_SET_MAC_CSR(a,v) \ + do { \ + while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \ + SMC_SET_MAC_DATA(v); \ + SMC_SET_MAC_CMD(MAC_CSR_CMD_CSR_BUSY_ | (a) ); \ + while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \ + } while (0) +#define SMC_GET_MAC_CR(x) SMC_GET_MAC_CSR( MAC_CR, x ) +#define SMC_SET_MAC_CR(x) SMC_SET_MAC_CSR( MAC_CR, x ) +#define SMC_GET_ADDRH(x) SMC_GET_MAC_CSR( ADDRH, x ) +#define SMC_SET_ADDRH(x) SMC_SET_MAC_CSR( ADDRH, x ) +#define SMC_GET_ADDRL(x) SMC_GET_MAC_CSR( ADDRL, x ) +#define SMC_SET_ADDRL(x) SMC_SET_MAC_CSR( ADDRL, x ) +#define SMC_GET_HASHH(x) SMC_GET_MAC_CSR( HASHH, x ) +#define SMC_SET_HASHH(x) SMC_SET_MAC_CSR( HASHH, x ) +#define SMC_GET_HASHL(x) SMC_GET_MAC_CSR( HASHL, x ) +#define SMC_SET_HASHL(x) SMC_SET_MAC_CSR( HASHL, x ) +#define SMC_GET_MII_ACC(x) SMC_GET_MAC_CSR( MII_ACC, x ) +#define SMC_SET_MII_ACC(x) SMC_SET_MAC_CSR( MII_ACC, x ) +#define SMC_GET_MII_DATA(x) SMC_GET_MAC_CSR( MII_DATA, x ) +#define SMC_SET_MII_DATA(x) SMC_SET_MAC_CSR( MII_DATA, x ) +#define SMC_GET_FLOW(x) SMC_GET_MAC_CSR( FLOW, x ) +#define SMC_SET_FLOW(x) SMC_SET_MAC_CSR( FLOW, x ) +#define SMC_GET_VLAN1(x) SMC_GET_MAC_CSR( VLAN1, x ) +#define SMC_SET_VLAN1(x) SMC_SET_MAC_CSR( VLAN1, x ) +#define SMC_GET_VLAN2(x) SMC_GET_MAC_CSR( VLAN2, x ) +#define SMC_SET_VLAN2(x) SMC_SET_MAC_CSR( VLAN2, x ) +#define SMC_SET_WUFF(x) SMC_SET_MAC_CSR( WUFF, x ) +#define SMC_GET_WUCSR(x) SMC_GET_MAC_CSR( WUCSR, x ) +#define SMC_SET_WUCSR(x) SMC_SET_MAC_CSR( WUCSR, x ) + +/* PHY register read/write macros */ +#define SMC_GET_MII(a,phy,v) \ + do { \ + u32 __v; \ + do { \ + SMC_GET_MII_ACC(__v); \ + } while ( __v & MII_ACC_MII_BUSY_ ); \ + SMC_SET_MII_ACC( ((phy)<<11) | ((a)<<6) | \ + MII_ACC_MII_BUSY_); \ + do { \ + SMC_GET_MII_ACC(__v); \ + } while ( __v & MII_ACC_MII_BUSY_ ); \ + SMC_GET_MII_DATA(v); \ + } while (0) +#define SMC_SET_MII(a,phy,v) \ + do { \ + u32 __v; \ + do { \ + SMC_GET_MII_ACC(__v); \ + } while ( __v & MII_ACC_MII_BUSY_ ); \ + SMC_SET_MII_DATA(v); \ + SMC_SET_MII_ACC( ((phy)<<11) | ((a)<<6) | \ + MII_ACC_MII_BUSY_ | \ + MII_ACC_MII_WRITE_ ); \ + do { \ + SMC_GET_MII_ACC(__v); \ + } while ( __v & MII_ACC_MII_BUSY_ ); \ + } while (0) +#define SMC_GET_PHY_BMCR(phy,x) SMC_GET_MII( MII_BMCR, phy, x ) +#define SMC_SET_PHY_BMCR(phy,x) SMC_SET_MII( MII_BMCR, phy, x ) +#define SMC_GET_PHY_BMSR(phy,x) SMC_GET_MII( MII_BMSR, phy, x ) +#define SMC_GET_PHY_ID1(phy,x) SMC_GET_MII( MII_PHYSID1, phy, x ) +#define SMC_GET_PHY_ID2(phy,x) SMC_GET_MII( MII_PHYSID2, phy, x ) +#define SMC_GET_PHY_MII_ADV(phy,x) SMC_GET_MII( MII_ADVERTISE, phy, x ) +#define SMC_SET_PHY_MII_ADV(phy,x) SMC_SET_MII( MII_ADVERTISE, phy, x ) +#define SMC_GET_PHY_MII_LPA(phy,x) SMC_GET_MII( MII_LPA, phy, x ) +#define SMC_SET_PHY_MII_LPA(phy,x) SMC_SET_MII( MII_LPA, phy, x ) +#define SMC_GET_PHY_CTRL_STS(phy,x) SMC_GET_MII( PHY_MODE_CTRL_STS, phy, x ) +#define SMC_SET_PHY_CTRL_STS(phy,x) SMC_SET_MII( PHY_MODE_CTRL_STS, phy, x ) +#define SMC_GET_PHY_INT_SRC(phy,x) SMC_GET_MII( PHY_INT_SRC, phy, x ) +#define SMC_SET_PHY_INT_SRC(phy,x) SMC_SET_MII( PHY_INT_SRC, phy, x ) +#define SMC_GET_PHY_INT_MASK(phy,x) SMC_GET_MII( PHY_INT_MASK, phy, x ) +#define SMC_SET_PHY_INT_MASK(phy,x) SMC_SET_MII( PHY_INT_MASK, phy, x ) +#define SMC_GET_PHY_SPECIAL(phy,x) SMC_GET_MII( PHY_SPECIAL, phy, x ) + + + +/* Misc read/write macros */ + +#ifndef SMC_GET_MAC_ADDR +#define SMC_GET_MAC_ADDR(addr) \ + do { \ + unsigned int __v; \ + \ + SMC_GET_MAC_CSR(ADDRL, __v); \ + addr[0] = __v; addr[1] = __v >> 8; \ + addr[2] = __v >> 16; addr[3] = __v >> 24; \ + SMC_GET_MAC_CSR(ADDRH, __v); \ + addr[4] = __v; addr[5] = __v >> 8; \ + } while (0) +#endif + +#define SMC_SET_MAC_ADDR(addr) \ + do { \ + SMC_SET_MAC_CSR(ADDRL, \ + addr[0] | \ + (addr[1] << 8) | \ + (addr[2] << 16) | \ + (addr[3] << 24)); \ + SMC_SET_MAC_CSR(ADDRH, addr[4]|(addr[5] << 8));\ + } while (0) + + +#define SMC_WRITE_EEPROM_CMD(cmd, addr) \ + do { \ + while (SMC_GET_E2P_CMD() & MAC_CSR_CMD_CSR_BUSY_); \ + SMC_SET_MAC_CMD(MAC_CSR_CMD_R_NOT_W_ | a ); \ + while (SMC_GET_MAC_CMD() & MAC_CSR_CMD_CSR_BUSY_); \ + } while (0) + +#endif /* _SMC911X_H_ */ |