Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
  Blackfin: bf51x: fix up RSI_PID# MMR defines
  Blackfin: bf52x/bf54x: fix up usb MMR defines
  Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
  Blackfin: gptimers: add structure for hardware register layout
  Blackfin: wire up new sendmmsg syscall
  Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
  Blackfin: bfin_serial.h: turn default port wrappers into stubs

15 files changed, 62 insertions, 569 deletions

diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 7dbc664eab1..7fd0ec7b5b0 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -184,7 +184,7 @@ struct bfin_uart_regs {
 #undef __BFP
 
 #ifndef port_membase
-# define port_membase(p) (((struct bfin_serial_port *)(p))->port.membase)
+# define port_membase(p) 0
 #endif
 
 #define UART_GET_CHAR(p)      bfin_read16(port_membase(p) + OFFSET_RBR)
@@ -235,10 +235,10 @@ struct bfin_uart_regs {
 #define UART_SET_DLAB(p)      do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0)
 
 #ifndef put_lsr_cache
-# define put_lsr_cache(p, v) (((struct bfin_serial_port *)(p))->lsr = (v))
+# define put_lsr_cache(p, v)
 #endif
 #ifndef get_lsr_cache
-# define get_lsr_cache(p)    (((struct bfin_serial_port *)(p))->lsr)
+# define get_lsr_cache(p) 0
 #endif
 
 /* The hardware clears the LSR bits upon read, so we need to cache
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index c722acdda0d..38657dac123 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -193,4 +193,22 @@ uint16_t get_enabled_gptimers(void);
 uint32_t get_gptimer_status(unsigned int group);
 void     set_gptimer_status(unsigned int group, uint32_t value);
 
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin timer registers layout
+ */
+struct bfin_gptimer_regs {
+	__BFP(config);
+	u32 counter;
+	u32 period;
+	u32 width;
+};
+
+#undef __BFP
+
 #endif
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 6ff9c411b14..0ccba60b9cc 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -398,8 +398,9 @@
 #define __NR_clock_adjtime	377
 #define __NR_syncfs		378
 #define __NR_setns		379
+#define __NR_sendmmsg		380
 
-#define __NR_syscall		380
+#define __NR_syscall		381
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
index 94b1d8a0256..fce4807ceef 100644
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ b/arch/blackfin/kernel/debug-mmrs.c
@@ -13,6 +13,7 @@
 
 #include <asm/blackfin.h>
 #include <asm/gpio.h>
+#include <asm/gptimers.h>
 #include <asm/bfin_can.h>
 #include <asm/bfin_dma.h>
 #include <asm/bfin_ppi.h>
@@ -230,8 +231,8 @@ bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdm
 #define DMA(num)  _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "")
 #define _MDMA(num, x) \
 	do { \
-		_DMA(num, x##DMA_D##num##_CONFIG, 'D', #x); \
-		_DMA(num, x##DMA_S##num##_CONFIG, 'S', #x); \
+		_DMA(num, x##DMA_D##num##_NEXT_DESC_PTR, 'D', #x); \
+		_DMA(num, x##DMA_S##num##_NEXT_DESC_PTR, 'S', #x); \
 	} while (0)
 #define MDMA(num) _MDMA(num, M)
 #define IMDMA(num) _MDMA(num, IM)
@@ -264,20 +265,15 @@ bfin_debug_mmrs_eppi(struct dentry *parent, unsigned long base, int num)
 /*
  * General Purpose Timers
  */
-#define GPTIMER_OFF(mmr) (TIMER0_##mmr - TIMER0_CONFIG)
-#define __GPTIMER(name) \
-	do { \
-		strcpy(_buf, #name); \
-		debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, (u16 *)(base + GPTIMER_OFF(name))); \
-	} while (0)
+#define __GPTIMER(uname, lname) __REGS(gptimer, #uname, lname)
 static void __init __maybe_unused
 bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num)
 {
 	char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num);
-	__GPTIMER(CONFIG);
-	__GPTIMER(COUNTER);
-	__GPTIMER(PERIOD);
-	__GPTIMER(WIDTH);
+	__GPTIMER(CONFIG, config);
+	__GPTIMER(COUNTER, counter);
+	__GPTIMER(PERIOD, period);
+	__GPTIMER(WIDTH, width);
 }
 #define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num)
 
@@ -355,7 +351,7 @@ bfin_debug_mmrs_ppi(struct dentry *parent, unsigned long base, int num)
 	__PPI(DELAY, delay);
 	__PPI(FRAME, frame);
 }
-#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_STATUS, num)
+#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_CONTROL, num)
 
 /*
  * SPI
@@ -1288,15 +1284,15 @@ static int __init bfin_debug_mmrs_init(void)
 	D16(VR_CTL);
 	D32(CHIPID);	/* it's part of this hardware block */
 
-#if defined(PPI_STATUS) || defined(PPI0_STATUS) || defined(PPI1_STATUS)
+#if defined(PPI_CONTROL) || defined(PPI0_CONTROL) || defined(PPI1_CONTROL)
 	parent = debugfs_create_dir("ppi", top);
-# ifdef PPI_STATUS
-	bfin_debug_mmrs_ppi(parent, PPI_STATUS, -1);
+# ifdef PPI_CONTROL
+	bfin_debug_mmrs_ppi(parent, PPI_CONTROL, -1);
 # endif
-# ifdef PPI0_STATUS
+# ifdef PPI0_CONTROL
 	PPI(0);
 # endif
-# ifdef PPI1_STATUS
+# ifdef PPI1_CONTROL
 	PPI(1);
 # endif
 #endif
@@ -1341,6 +1337,10 @@ static int __init bfin_debug_mmrs_init(void)
 	D16(RSI_PID1);
 	D16(RSI_PID2);
 	D16(RSI_PID3);
+	D16(RSI_PID4);
+	D16(RSI_PID5);
+	D16(RSI_PID6);
+	D16(RSI_PID7);
 	D16(RSI_PWR_CONTROL);
 	D16(RSI_RD_WAIT_EN);
 	D32(RSI_RESPONSE0);
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index f6d924ac0c4..00000000000
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
-	unsigned long uart_base_addr;
-	int uart_irq;
-	int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int uart_tx_dma_channel;
-	unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int uart_cts_pin;
-	int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	{
-	 0xFFC00400,
-	 IRQ_UART0_RX,
-	 IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	 CH_UART0_TX,
-	 CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	 CONFIG_UART0_CTS_PIN,
-	 CONFIG_UART0_RTS_PIN,
-#endif
-	 },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	{
-	 0xFFC02000,
-	 IRQ_UART1_RX,
-	 IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	 CH_UART1_TX,
-	 CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	 CONFIG_UART1_CTS_PIN,
-	 CONFIG_UART1_RTS_PIN,
-#endif
-	 },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 98a51c47929..cfab428e577 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -36,13 +36,13 @@
 #define RSI_EMASK                      0xFFC038C4 /* RSI Exception Mask Register */
 #define RSI_CONFIG                     0xFFC038C8 /* RSI Configuration Register */
 #define RSI_RD_WAIT_EN                 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0                       0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1                       0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2                       0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3                       0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4                       0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5                       0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
+#define RSI_PID0                       0xFFC038D0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID1                       0xFFC038D4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID2                       0xFFC038D8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID3                       0xFFC038DC /* RSI Peripheral ID Register 3 */
+#define RSI_PID4                       0xFFC038E0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID5                       0xFFC038E4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID6                       0xFFC038E8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID7                       0xFFC038EC /* RSI Peripheral ID Register 3 */
 
 #endif /* _DEF_BF514_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 960e08919de..00000000000
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
-	unsigned long uart_base_addr;
-	int uart_irq;
-	int uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int uart_tx_dma_channel;
-	unsigned int uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int uart_cts_pin;
-	int uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	{
-	 0xFFC00400,
-	 IRQ_UART0_RX,
-	 IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	 CH_UART0_TX,
-	 CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	 CONFIG_UART0_CTS_PIN,
-	 CONFIG_UART0_RTS_PIN,
-#endif
-	 },
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	{
-	 0xFFC02000,
-	 IRQ_UART1_RX,
-	 IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	 CH_UART1_TX,
-	 CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	 CONFIG_UART1_CTS_PIN,
-	 CONFIG_UART1_RTS_PIN,
-#endif
-	 },
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index cc383adfdff..aab80bb1a68 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -185,8 +185,8 @@
 #define                USB_EP_NI7_TXTYPE  0xffc03bd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
 #define            USB_EP_NI7_TXINTERVAL  0xffc03bd8   /* Sets the NAK response timeout on Endpoint7 */
 #define                USB_EP_NI7_RXTYPE  0xffc03bdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define            USB_EP_NI7_RXINTERVAL  0xffc03bf0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define               USB_EP_NI7_TXCOUNT  0xffc03bf8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03be0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03be8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
 
 #define                USB_DMA_INTERRUPT  0xffc03c00   /* Indicates pending interrupts for the DMA channels */
 
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 45dcaa4f3e4..00000000000
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-# define CONFIG_SERIAL_BFIN_CTSRTS
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
-	unsigned long	uart_base_addr;
-	int		uart_irq;
-	int		uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int	uart_tx_dma_channel;
-	unsigned int	uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int		uart_cts_pin;
-	int		uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART0_TX,
-	CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART0_CTS_PIN,
-	CONFIG_UART0_RTS_PIN,
-#endif
-	}
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 3e955dba895..00000000000
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
-	unsigned long	uart_base_addr;
-	int		uart_irq;
-	int		uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int	uart_tx_dma_channel;
-	unsigned int	uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int	uart_cts_pin;
-	int	uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART0_TX,
-	CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART0_CTS_PIN,
-	CONFIG_UART0_RTS_PIN,
-#endif
-	},
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART1_TX,
-	CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART1_CTS_PIN,
-	CONFIG_UART1_RTS_PIN,
-#endif
-	},
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index beb502e9cb3..00000000000
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
-	unsigned long	uart_base_addr;
-	int		uart_irq;
-	int		uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int	uart_tx_dma_channel;
-	unsigned int	uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int	uart_cts_pin;
-	int	uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART0_TX,
-	CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART0_CTS_PIN,
-	CONFIG_UART0_RTS_PIN,
-#endif
-	},
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART1_TX,
-	CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART1_CTS_PIN,
-	CONFIG_UART1_RTS_PIN,
-#endif
-	},
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-	{
-	0xFFC02100,
-	IRQ_UART2_RX,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART2_TX,
-	CH_UART2_RX,
-#endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
-	CONFIG_UART2_CTS_PIN,
-	CONFIG_UART2_RTS_PIN,
-#endif
-	},
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 0d94edaaaa2..00000000000
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright 2007-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \
-	defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS)
-# define CONFIG_SERIAL_BFIN_HARD_CTSRTS
-#endif
-
-struct bfin_serial_res {
-	unsigned long	uart_base_addr;
-	int		uart_irq;
-	int		uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int	uart_tx_dma_channel;
-	unsigned int	uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	int		uart_cts_pin;
-	int		uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	IRQ_UART0_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART0_TX,
-	CH_UART0_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	0,
-	0,
-#endif
-	},
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	IRQ_UART1_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART1_TX,
-	CH_UART1_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	GPIO_PE10,
-	GPIO_PE9,
-#endif
-	},
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-	{
-	0xFFC02100,
-	IRQ_UART2_RX,
-	IRQ_UART2_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART2_TX,
-	CH_UART2_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	0,
-	0,
-#endif
-	},
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART3
-	{
-	0xFFC03100,
-	IRQ_UART3_RX,
-	IRQ_UART3_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART3_TX,
-	CH_UART3_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	GPIO_PB3,
-	GPIO_PB2,
-#endif
-	},
-#endif
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 1cbba115f96..1fa41ec03f3 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -271,10 +271,10 @@
 #define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
 #define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
 #define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
 
 /* USB Endpoint 1 Control Registers */
 
-#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
 #define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
 #define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
 #define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
@@ -284,10 +284,10 @@
 #define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
 #define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
 #define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
 
 /* USB Endpoint 2 Control Registers */
 
-#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
 #define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
 #define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
 #define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
@@ -297,10 +297,10 @@
 #define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
 #define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
 #define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
 
 /* USB Endpoint 3 Control Registers */
 
-#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
 #define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
 #define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
 #define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
@@ -310,10 +310,10 @@
 #define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
 #define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
 #define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
 
 /* USB Endpoint 4 Control Registers */
 
-#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
 #define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
 #define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
 #define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
@@ -323,10 +323,10 @@
 #define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
 #define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
 #define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
 
 /* USB Endpoint 5 Control Registers */
 
-#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
 #define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
 #define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
 #define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
@@ -336,10 +336,10 @@
 #define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
 #define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
 #define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
 
 /* USB Endpoint 6 Control Registers */
 
-#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
 #define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
 #define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
 #define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
@@ -349,10 +349,10 @@
 #define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
 #define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
 #define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
 
 /* USB Endpoint 7 Control Registers */
 
-#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
 #define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
 #define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
 #define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
@@ -361,8 +361,9 @@
 #define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
 #define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
 #define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03fe0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03fe8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+
 #define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
 
 /* USB Channel 0 Config Registers */
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
deleted file mode 100644
index 3a6947456cf..00000000000
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2006-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-# define CONFIG_SERIAL_BFIN_CTSRTS
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-#endif
-
-struct bfin_serial_res {
-	unsigned long	uart_base_addr;
-	int		uart_irq;
-	int		uart_status_irq;
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	unsigned int	uart_tx_dma_channel;
-	unsigned int	uart_rx_dma_channel;
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int		uart_cts_pin;
-	int		uart_rts_pin;
-#endif
-};
-
-struct bfin_serial_res bfin_serial_resource[] = {
-	{
-	0xFFC00400,
-	IRQ_UART_RX,
-	IRQ_UART_ERROR,
-#ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART_TX,
-	CH_UART_RX,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART0_CTS_PIN,
-	CONFIG_UART0_RTS_PIN,
-#endif
-	}
-};
-
-#define DRIVER_NAME "bfin-uart"
-
-#include <asm/bfin_serial.h>
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index dda11ef06be..225d311c970 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1754,6 +1754,7 @@ ENTRY(_sys_call_table)
 	.long _sys_clock_adjtime
 	.long _sys_syncfs
 	.long _sys_setns
+	.long _sys_sendmmsg		/* 380 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall