ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5

Actually, the base address of uart is different between EXYNOS4
and EXYNOS5 and this patch enables to support uart for EXYNOS4
and EXYNOS5 SoCs at runtime.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

11 files changed, 135 insertions, 18 deletions

diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2117f0257ef..f8a377076ff 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
 
 # device support
 
+obj-y					+= dev-uart.o
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
 obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 02eed29c158..4a82cf0071c 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -477,7 +477,10 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
 		tcfg->has_fracval = 1;
 
-	s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+	if (soc_is_exynos5250())
+		s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
+	else
+		s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
 }
 
 static DEFINE_SPINLOCK(eint_lock);
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
new file mode 100644
index 00000000000..2e85c022fd1
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Base EXYNOS UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+#define EXYNOS_UART_RESOURCE(_series, _nr)	\
+static struct resource exynos##_series##_uart##_nr##_resource[] = {	\
+	[0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART),	\
+	[1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr),	\
+};
+
+EXYNOS_UART_RESOURCE(4, 0)
+EXYNOS_UART_RESOURCE(4, 1)
+EXYNOS_UART_RESOURCE(4, 2)
+EXYNOS_UART_RESOURCE(4, 3)
+
+struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= exynos4_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(exynos4_uart0_resource),
+	},
+	[1] = {
+		.resources	= exynos4_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(exynos4_uart1_resource),
+	},
+	[2] = {
+		.resources	= exynos4_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(exynos4_uart2_resource),
+	},
+	[3] = {
+		.resources	= exynos4_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(exynos4_uart3_resource),
+	},
+};
+
+EXYNOS_UART_RESOURCE(5, 0)
+EXYNOS_UART_RESOURCE(5, 1)
+EXYNOS_UART_RESOURCE(5, 2)
+EXYNOS_UART_RESOURCE(5, 3)
+
+struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= exynos5_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
+	},
+	[1] = {
+		.resources	= exynos5_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
+	},
+	[2] = {
+		.resources	= exynos5_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(exynos5_uart2_resource),
+	},
+	[3] = {
+		.resources	= exynos5_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(exynos5_uart3_resource),
+	},
+};
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6cacf16a67a..6c857ff0b5d 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,8 +21,13 @@
 	 */
 
 	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
+		mov	\rp, #0x10000000
+		ldr	\rp, [\rp, #0x0]
+		and	\rp, \rp, #0xf00000
+		teq	\rp, #0x500000		@@ EXYNOS5
+		ldreq	\rp, =EXYNOS5_PA_UART
+		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
+		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
 		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
 		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 1d401c95783..f78070ee79f 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -173,4 +173,16 @@
 /* Set the default NR_IRQS */
 #define NR_IRQS			(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
 
+#define EXYNOS4_IRQ_UART0		IRQ_SPI(52)
+#define EXYNOS4_IRQ_UART1		IRQ_SPI(53)
+#define EXYNOS4_IRQ_UART2		IRQ_SPI(54)
+#define EXYNOS4_IRQ_UART3		IRQ_SPI(55)
+#define EXYNOS4_IRQ_UART4		IRQ_SPI(56)
+
+#define EXYNOS5_IRQ_UART0		IRQ_SPI(51)
+#define EXYNOS5_IRQ_UART1		IRQ_SPI(52)
+#define EXYNOS5_IRQ_UART2		IRQ_SPI(53)
+#define EXYNOS5_IRQ_UART3		IRQ_SPI(54)
+#define EXYNOS5_IRQ_UART4		IRQ_SPI(55)
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 2ad4e9cfe49..ea513c626b1 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -153,7 +153,6 @@
 #define S3C_PA_IIC7			EXYNOS4_PA_IIC(7)
 #define S3C_PA_RTC			EXYNOS4_PA_RTC
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
-#define S3C_PA_UART			EXYNOS4_PA_UART
 #define S3C_PA_SPI0			EXYNOS4_PA_SPI0
 #define S3C_PA_SPI1			EXYNOS4_PA_SPI1
 #define S3C_PA_SPI2			EXYNOS4_PA_SPI2
@@ -182,15 +181,18 @@
 
 /* Compatibility UART */
 
-#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define EXYNOS4_PA_UART0		0x13800000
+#define EXYNOS4_PA_UART1		0x13810000
+#define EXYNOS4_PA_UART2		0x13820000
+#define EXYNOS4_PA_UART3		0x13830000
+#define EXYNOS4_SZ_UART			SZ_256
 
-#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-#define S5P_PA_UART4			S5P_PA_UART(4)
+#define EXYNOS5_PA_UART0		0x12C00000
+#define EXYNOS5_PA_UART1		0x12C10000
+#define EXYNOS5_PA_UART2		0x12C20000
+#define EXYNOS5_PA_UART3		0x12C30000
+#define EXYNOS5_SZ_UART			SZ_256
 
-#define S5P_SZ_UART			SZ_256
+#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 21d97bcd9ac..493f4f365dd 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 - uncompress code
+ * EXYNOS - uncompress code
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,12 +12,20 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H __FILE__
 
+#include <asm/mach-types.h>
+
 #include <mach/map.h>
+
+volatile u8 *uart_base;
+
 #include <plat/uncompress.h>
 
 static void arch_detect_cpu(void)
 {
-	/* we do not need to do any cpu detection here at the moment. */
+	if (machine_is_smdk5250())
+		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
+	else
+		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 
 	/*
 	 * For preventing FIFO overrun or infinite loop of UART console,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8167ce66188..10e235cc7c9 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -40,6 +40,10 @@ config S5P_HRT
 	help
 	  Use the High Resolution timer support
 
+config S5P_DEV_UART
+	def_bool y
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
 config S5P_PM
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 30d8c3016e6..4bd82413665 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,7 +12,6 @@ obj-				:=
 
 # Core files
 
-obj-y				+= dev-uart.o
 obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
@@ -23,5 +22,7 @@ obj-$(CONFIG_S5P_SLEEP)		+= sleep.o
 obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
 
 # devices
+
+obj-$(CONFIG_S5P_DEV_UART)	+= dev-uart.o
 obj-$(CONFIG_S5P_DEV_MFC)	+= dev-mfc.o
 obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4214ea0ff8f..32cc67e6be1 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -26,6 +26,8 @@ struct s3c24xx_uart_resources {
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index ee48e12a1e7..7e068d182c3 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -37,7 +37,9 @@ static void arch_detect_cpu(void);
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
+#ifdef S3C_PA_UART
 #define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)