summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJason Yeh <jason.yeh@amd.com>2008-07-23 23:05:53 +0200
committerIngo Molnar <mingo@elte.hu>2008-07-26 11:48:16 +0200
commit1a960b402a51d80abf54e3f8e4972374ffe5f22d (patch)
tree108222afe94df145e7a71f44bb077067c35f0131
parent6852fd9b86d05063c6ef49d2e12e061cc7f6a105 (diff)
Oprofile Multiplexing Patch
This patch introduces multiplexing support for the Oprofile kernel module. It basically adds a new function pointer in oprofile_operator allowing each architecture to supply its callback to switch between different sets of event when the timer expires. Userspace tools can modify the time slice through /dev/oprofile/time_slice. It also modifies the number of counters exposed to the userspace through /dev/oprofile. For example, the number of counters for AMD CPUs are changed to 32 and multiplexed in the sets of 4. Signed-off-by: Jason Yeh <jason.yeh@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: oprofile-list <oprofile-list@lists.sourceforge.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-rw-r--r--arch/x86/oprofile/nmi_int.c100
-rw-r--r--arch/x86/oprofile/op_counter.h3
-rw-r--r--arch/x86/oprofile/op_model_amd.c76
-rw-r--r--arch/x86/oprofile/op_model_p4.c4
-rw-r--r--arch/x86/oprofile/op_model_ppro.c2
-rw-r--r--arch/x86/oprofile/op_x86_model.h3
-rw-r--r--drivers/oprofile/oprof.c58
-rw-r--r--drivers/oprofile/oprof.h4
-rw-r--r--drivers/oprofile/oprofile_files.c39
-rw-r--r--include/linux/oprofile.h3
10 files changed, 247 insertions, 45 deletions
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 287513a0981..2a65fe7680a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -23,12 +23,18 @@
#include "op_counter.h"
#include "op_x86_model.h"
+DEFINE_PER_CPU(int, switch_index);
+
static struct op_x86_model_spec const *model;
static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
static int nmi_start(void);
static void nmi_stop(void);
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs);
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs);
+static void nmi_cpu_stop(void *dummy);
+static void nmi_cpu_start(void *dummy);
/* 0 == registered but off, 1 == registered and on */
static int nmi_enabled = 0;
@@ -81,6 +87,47 @@ static void exit_sysfs(void)
#define exit_sysfs() do { } while (0)
#endif /* CONFIG_PM */
+static void nmi_cpu_switch(void *dummy)
+{
+ int cpu = smp_processor_id();
+ int si = per_cpu(switch_index, cpu);
+ struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+ nmi_cpu_stop(NULL);
+ nmi_cpu_save_mpx_registers(msrs);
+
+ /* move to next set */
+ si += model->num_hardware_counters;
+ if ((si > model->num_counters) || (counter_config[si].count == 0))
+ per_cpu(switch_index, smp_processor_id()) = 0;
+ else
+ per_cpu(switch_index, smp_processor_id()) = si;
+
+ nmi_cpu_restore_mpx_registers(msrs);
+ model->setup_ctrs(msrs);
+ nmi_cpu_start(NULL);
+}
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+ return counter_config[model->num_hardware_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+ if (nmi_multiplex_on() < 0)
+ return -EINVAL;
+
+ on_each_cpu(nmi_cpu_switch, NULL, 0, 1);
+
+ return 0;
+}
+
static int profile_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
@@ -144,11 +191,10 @@ static void free_msrs(void)
static int allocate_msrs(void)
{
- int success = 1;
+ int i, success = 1;
size_t controls_size = sizeof(struct op_msr) * model->num_controls;
size_t counters_size = sizeof(struct op_msr) * model->num_counters;
- int i;
for_each_possible_cpu(i) {
per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
GFP_KERNEL);
@@ -156,8 +202,8 @@ static int allocate_msrs(void)
success = 0;
break;
}
- per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
- GFP_KERNEL);
+ per_cpu(cpu_msrs, i).controls =
+ kmalloc(controls_size, GFP_KERNEL);
if (!per_cpu(cpu_msrs, i).controls) {
success = 0;
break;
@@ -201,7 +247,8 @@ static int nmi_setup(void)
return err;
}
- /* We need to serialize save and setup for HT because the subset
+ /*
+ * We need to serialize save and setup for HT because the subset
* of msrs are distinct for save and setup operations
*/
@@ -217,7 +264,6 @@ static int nmi_setup(void)
per_cpu(cpu_msrs, 0).controls,
sizeof(struct op_msr) * model->num_controls);
}
-
}
on_each_cpu(nmi_save_registers, NULL, 1);
on_each_cpu(nmi_cpu_setup, NULL, 1);
@@ -225,7 +271,41 @@ static int nmi_setup(void)
return 0;
}
-static void nmi_restore_registers(struct op_msrs *msrs)
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
+{
+ unsigned int si = __get_cpu_var(switch_index);
+ unsigned int const nr_ctrs = model->num_hardware_counters;
+ struct op_msr *counters = &msrs->counters[si];
+ unsigned int i;
+
+ for (i = 0; i < nr_ctrs; ++i) {
+ int offset = i + si;
+ if (counters[offset].addr) {
+ rdmsr(counters[offset].addr,
+ counters[offset].multiplex.low,
+ counters[offset].multiplex.high);
+ }
+ }
+}
+
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
+{
+ unsigned int si = __get_cpu_var(switch_index);
+ unsigned int const nr_ctrs = model->num_hardware_counters;
+ struct op_msr *counters = &msrs->counters[si];
+ unsigned int i;
+
+ for (i = 0; i < nr_ctrs; ++i) {
+ int offset = i + si;
+ if (counters[offset].addr) {
+ wrmsr(counters[offset].addr,
+ counters[offset].multiplex.low,
+ counters[offset].multiplex.high);
+ }
+ }
+}
+
+static void nmi_cpu_restore_registers(struct op_msrs *msrs)
{
unsigned int const nr_ctrs = model->num_counters;
unsigned int const nr_ctrls = model->num_controls;
@@ -265,7 +345,8 @@ static void nmi_cpu_shutdown(void *dummy)
apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
apic_write(APIC_LVTERR, v);
- nmi_restore_registers(msrs);
+ nmi_cpu_restore_registers(msrs);
+ __get_cpu_var(switch_index) = 0;
}
static void nmi_shutdown(void)
@@ -328,6 +409,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ counter_config[i].save_count_low = 0;
}
return 0;
@@ -469,12 +551,14 @@ int __init op_nmi_init(struct oprofile_operations *ops)
}
/* default values, can be overwritten by model */
+ __get_cpu_var(switch_index) = 0;
ops->create_files = nmi_create_files;
ops->setup = nmi_setup;
ops->shutdown = nmi_shutdown;
ops->start = nmi_start;
ops->stop = nmi_stop;
ops->cpu_type = cpu_type;
+ ops->switch_events = nmi_switch_event;
if (model->init)
ret = model->init(ops);
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 2880b15c467..786d6e01cf7 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -10,13 +10,14 @@
#ifndef OP_COUNTER_H
#define OP_COUNTER_H
-#define OP_MAX_COUNTER 8
+#define OP_MAX_COUNTER 32
/* Per-perfctr configuration as set via
* oprofilefs.
*/
struct op_counter_config {
unsigned long count;
+ unsigned long save_count_low;
unsigned long enabled;
unsigned long event;
unsigned long kernel;
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index d9faf607b3a..bbf2b68bcc5 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -15,6 +15,7 @@
#include <linux/oprofile.h>
#include <linux/device.h>
#include <linux/pci.h>
+#include <linux/percpu.h>
#include <asm/ptrace.h>
#include <asm/msr.h>
@@ -23,8 +24,10 @@
#include "op_x86_model.h"
#include "op_counter.h"
-#define NUM_COUNTERS 4
-#define NUM_CONTROLS 4
+#define NUM_COUNTERS 32
+#define NUM_HARDWARE_COUNTERS 4
+#define NUM_CONTROLS 32
+#define NUM_HARDWARE_CONTROLS 4
#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
@@ -48,6 +51,7 @@
#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
static unsigned long reset_value[NUM_COUNTERS];
+DECLARE_PER_CPU(int, switch_index);
#ifdef CONFIG_OPROFILE_IBS
@@ -130,15 +134,17 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
int i;
for (i = 0; i < NUM_COUNTERS; i++) {
- if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
- msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
+ int hw_counter = i % NUM_HARDWARE_COUNTERS;
+ if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + hw_counter))
+ msrs->counters[i].addr = MSR_K7_PERFCTR0 + hw_counter;
else
msrs->counters[i].addr = 0;
}
for (i = 0; i < NUM_CONTROLS; i++) {
- if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
- msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
+ int hw_control = i % NUM_HARDWARE_CONTROLS;
+ if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + hw_control))
+ msrs->controls[i].addr = MSR_K7_EVNTSEL0 + hw_control;
else
msrs->controls[i].addr = 0;
}
@@ -150,8 +156,16 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
unsigned int low, high;
int i;
+ for (i = 0; i < NUM_HARDWARE_CONTROLS; ++i) {
+ int offset = i + __get_cpu_var(switch_index);
+ if (counter_config[offset].enabled)
+ reset_value[offset] = counter_config[offset].count;
+ else
+ reset_value[offset] = 0;
+ }
+
/* clear all counters */
- for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ for (i = 0 ; i < NUM_HARDWARE_CONTROLS; ++i) {
if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
CTRL_READ(low, high, msrs, i);
@@ -161,34 +175,31 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
}
/* avoid a false detection of ctr overflows in NMI handler */
- for (i = 0; i < NUM_COUNTERS; ++i) {
+ for (i = 0; i < NUM_HARDWARE_COUNTERS; ++i) {
if (unlikely(!CTR_IS_RESERVED(msrs, i)))
continue;
CTR_WRITE(1, msrs, i);
}
/* enable active counters */
- for (i = 0; i < NUM_COUNTERS; ++i) {
- if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
- reset_value[i] = counter_config[i].count;
-
- CTR_WRITE(counter_config[i].count, msrs, i);
+ for (i = 0; i < NUM_HARDWARE_COUNTERS; ++i) {
+ int offset = i + __get_cpu_var(switch_index);
+ if ((counter_config[offset].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+ CTR_WRITE(counter_config[offset].count, msrs, i);
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR_LO(low);
CTRL_CLEAR_HI(high);
CTRL_SET_ENABLE(low);
- CTRL_SET_USR(low, counter_config[i].user);
- CTRL_SET_KERN(low, counter_config[i].kernel);
- CTRL_SET_UM(low, counter_config[i].unit_mask);
- CTRL_SET_EVENT_LOW(low, counter_config[i].event);
- CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+ CTRL_SET_USR(low, counter_config[offset].user);
+ CTRL_SET_KERN(low, counter_config[offset].kernel);
+ CTRL_SET_UM(low, counter_config[offset].unit_mask);
+ CTRL_SET_EVENT_LOW(low, counter_config[offset].event);
+ CTRL_SET_EVENT_HIGH(high, counter_config[offset].event);
CTRL_SET_HOST_ONLY(high, 0);
CTRL_SET_GUEST_ONLY(high, 0);
CTRL_WRITE(low, high, msrs, i);
- } else {
- reset_value[i] = 0;
}
}
}
@@ -276,13 +287,14 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
unsigned int low, high;
int i;
- for (i = 0 ; i < NUM_COUNTERS; ++i) {
- if (!reset_value[i])
+ for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
+ int offset = i + __get_cpu_var(switch_index);
+ if (!reset_value[offset])
continue;
CTR_READ(low, high, msrs, i);
if (CTR_OVERFLOWED(low)) {
- oprofile_add_sample(regs, i);
- CTR_WRITE(reset_value[i], msrs, i);
+ oprofile_add_sample(regs, offset);
+ CTR_WRITE(reset_value[offset], msrs, i);
}
}
@@ -298,8 +310,10 @@ static void op_amd_start(struct op_msrs const * const msrs)
{
unsigned int low, high;
int i;
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (reset_value[i]) {
+
+ for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
+ int offset = i + __get_cpu_var(switch_index);
+ if (reset_value[offset]) {
CTRL_READ(low, high, msrs, i);
CTRL_SET_ACTIVE(low);
CTRL_WRITE(low, high, msrs, i);
@@ -329,8 +343,8 @@ static void op_amd_stop(struct op_msrs const * const msrs)
/* Subtle: stop on all counters to avoid race with
* setting our pm callback */
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (!reset_value[i])
+ for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
+ if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
continue;
CTRL_READ(low, high, msrs, i);
CTRL_SET_INACTIVE(low);
@@ -356,11 +370,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
{
int i;
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
if (CTR_IS_RESERVED(msrs, i))
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
}
- for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+ for (i = 0 ; i < NUM_HARDWARE_COUNTERS ; ++i) {
if (CTRL_IS_RESERVED(msrs, i))
release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
@@ -534,6 +548,8 @@ struct op_x86_model_spec const op_amd_spec = {
.exit = op_amd_exit,
.num_counters = NUM_COUNTERS,
.num_controls = NUM_CONTROLS,
+ .num_hardware_counters = NUM_HARDWARE_COUNTERS,
+ .num_hardware_controls = NUM_HARDWARE_CONTROLS,
.fill_in_addresses = &op_amd_fill_in_addresses,
.setup_ctrs = &op_amd_setup_ctrs,
.check_ctrs = &op_amd_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 56b4757a1f4..e641545d479 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -701,6 +701,8 @@ static void p4_shutdown(struct op_msrs const * const msrs)
struct op_x86_model_spec const op_p4_ht2_spec = {
.num_counters = NUM_COUNTERS_HT2,
.num_controls = NUM_CONTROLS_HT2,
+ .num_hardware_counters = NUM_COUNTERS_HT2,
+ .num_hardware_controls = NUM_CONTROLS_HT2,
.fill_in_addresses = &p4_fill_in_addresses,
.setup_ctrs = &p4_setup_ctrs,
.check_ctrs = &p4_check_ctrs,
@@ -713,6 +715,8 @@ struct op_x86_model_spec const op_p4_ht2_spec = {
struct op_x86_model_spec const op_p4_spec = {
.num_counters = NUM_COUNTERS_NON_HT,
.num_controls = NUM_CONTROLS_NON_HT,
+ .num_hardware_counters = NUM_COUNTERS_NON_HT,
+ .num_hardware_controls = NUM_CONTROLS_NON_HT,
.fill_in_addresses = &p4_fill_in_addresses,
.setup_ctrs = &p4_setup_ctrs,
.check_ctrs = &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index eff431f6c57..e5811aa480e 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -183,6 +183,8 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
struct op_x86_model_spec const op_ppro_spec = {
.num_counters = NUM_COUNTERS,
.num_controls = NUM_CONTROLS,
+ .num_hardware_counters = NUM_COUNTERS,
+ .num_hardware_controls = NUM_CONTROLS,
.fill_in_addresses = &ppro_fill_in_addresses,
.setup_ctrs = &ppro_setup_ctrs,
.check_ctrs = &ppro_check_ctrs,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 05a0261ba0c..e07ba107637 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -19,6 +19,7 @@ struct op_saved_msr {
struct op_msr {
unsigned long addr;
struct op_saved_msr saved;
+ struct op_saved_msr multiplex;
};
struct op_msrs {
@@ -34,6 +35,8 @@ struct pt_regs;
struct op_x86_model_spec {
int (*init)(struct oprofile_operations *ops);
void (*exit)(void);
+ unsigned int const num_hardware_counters;
+ unsigned int const num_hardware_controls;
unsigned int const num_counters;
unsigned int const num_controls;
void (*fill_in_addresses)(struct op_msrs * const msrs);
diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c
index 2c645170f06..b2fa5df64a6 100644
--- a/drivers/oprofile/oprof.c
+++ b/drivers/oprofile/oprof.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/moduleparam.h>
+#include <linux/workqueue.h>
+#include <linux/time.h>
#include <asm/mutex.h>
#include "oprof.h"
@@ -19,13 +21,18 @@
#include "cpu_buffer.h"
#include "buffer_sync.h"
#include "oprofile_stats.h"
+
+static unsigned long is_setup;
+static void switch_worker(struct work_struct *work);
+static DECLARE_DELAYED_WORK(switch_work, switch_worker);
+static DEFINE_MUTEX(start_mutex);
struct oprofile_operations oprofile_ops;
+unsigned long timeout_jiffies;
unsigned long oprofile_started;
unsigned long backtrace_depth;
-static unsigned long is_setup;
-static DEFINE_MUTEX(start_mutex);
+/* Multiplexing defaults at 1 msec*/
/* timer
0 - use performance monitoring hardware if available
@@ -87,6 +94,16 @@ out:
return err;
}
+static void start_switch_worker(void)
+{
+ schedule_delayed_work(&switch_work, timeout_jiffies);
+}
+
+static void switch_worker(struct work_struct *work)
+{
+ if (!oprofile_ops.switch_events())
+ start_switch_worker();
+}
/* Actually start profiling (echo 1>/dev/oprofile/enable) */
int oprofile_start(void)
@@ -94,7 +111,6 @@ int oprofile_start(void)
int err = -EINVAL;
mutex_lock(&start_mutex);
-
if (!is_setup)
goto out;
@@ -108,6 +124,9 @@ int oprofile_start(void)
if ((err = oprofile_ops.start()))
goto out;
+ if (oprofile_ops.switch_events)
+ start_switch_worker();
+
oprofile_started = 1;
out:
mutex_unlock(&start_mutex);
@@ -123,6 +142,7 @@ void oprofile_stop(void)
goto out;
oprofile_ops.stop();
oprofile_started = 0;
+ cancel_delayed_work_sync(&switch_work);
/* wake up the daemon to read what remains */
wake_up_buffer_waiter();
out:
@@ -155,6 +175,32 @@ post_sync:
mutex_unlock(&start_mutex);
}
+/* User inputs in ms, converts to jiffies */
+int oprofile_set_timeout(unsigned long val_msec)
+{
+ int err = 0;
+
+ mutex_lock(&start_mutex);
+
+ if (oprofile_started) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if (!oprofile_ops.switch_events) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ timeout_jiffies = msecs_to_jiffies(val_msec);
+ if (timeout_jiffies == MAX_JIFFY_OFFSET)
+ timeout_jiffies = msecs_to_jiffies(1);
+
+out:
+ mutex_unlock(&start_mutex);
+ return err;
+
+}
int oprofile_set_backtrace(unsigned long val)
{
@@ -179,10 +225,16 @@ out:
return err;
}
+static void __init oprofile_switch_timer_init(void)
+{
+ timeout_jiffies = msecs_to_jiffies(1);
+}
+
static int __init oprofile_init(void)
{
int err;
+ oprofile_switch_timer_init();
err = oprofile_arch_init(&oprofile_ops);
if (err < 0 || timer) {
diff --git a/drivers/oprofile/oprof.h b/drivers/oprofile/oprof.h
index 18323650806..c4406a7366b 100644
--- a/drivers/oprofile/oprof.h
+++ b/drivers/oprofile/oprof.h
@@ -27,7 +27,8 @@ extern unsigned long fs_buffer_watershed;
extern struct oprofile_operations oprofile_ops;
extern unsigned long oprofile_started;
extern unsigned long backtrace_depth;
-
+extern unsigned long timeout_jiffies;
+
struct super_block;
struct dentry;
@@ -35,5 +36,6 @@ void oprofile_create_files(struct super_block * sb, struct dentry * root);
void oprofile_timer_init(struct oprofile_operations * ops);
int oprofile_set_backtrace(unsigned long depth);
+int oprofile_set_timeout(unsigned long time);
#endif /* OPROF_H */
diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c
index ef953ba5ab6..cc4f5a1f8ef 100644
--- a/drivers/oprofile/oprofile_files.c
+++ b/drivers/oprofile/oprofile_files.c
@@ -9,6 +9,7 @@
#include <linux/fs.h>
#include <linux/oprofile.h>
+#include <linux/jiffies.h>
#include "event_buffer.h"
#include "oprofile_stats.h"
@@ -18,6 +19,40 @@ unsigned long fs_buffer_size = 131072;
unsigned long fs_cpu_buffer_size = 8192;
unsigned long fs_buffer_watershed = 32768; /* FIXME: tune */
+static ssize_t timeout_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ return oprofilefs_ulong_to_user(jiffies_to_msecs(timeout_jiffies),
+ buf, count, offset);
+}
+
+
+static ssize_t timeout_write(struct file *file, char const __user *buf,
+ size_t count, loff_t *offset)
+{
+ unsigned long val;
+ int retval;
+
+ if (*offset)
+ return -EINVAL;
+
+ retval = oprofilefs_ulong_from_user(&val, buf, count);
+ if (retval)
+ return retval;
+
+ retval = oprofile_set_timeout(val);
+
+ if (retval)
+ return retval;
+ return count;
+}
+
+static const struct file_operations timeout_fops = {
+ .read = timeout_read,
+ .write = timeout_write,
+};
+
+
static ssize_t depth_read(struct file * file, char __user * buf, size_t count, loff_t * offset)
{
return oprofilefs_ulong_to_user(backtrace_depth, buf, count, offset);
@@ -85,11 +120,10 @@ static ssize_t enable_write(struct file * file, char const __user * buf, size_t
if (*offset)
return -EINVAL;
-
retval = oprofilefs_ulong_from_user(&val, buf, count);
if (retval)
return retval;
-
+
if (val)
retval = oprofile_start();
else
@@ -129,6 +163,7 @@ void oprofile_create_files(struct super_block * sb, struct dentry * root)
oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops);
oprofilefs_create_file(sb, root, "backtrace_depth", &depth_fops);
oprofilefs_create_file(sb, root, "pointer_size", &pointer_size_fops);
+ oprofilefs_create_file(sb, root, "timeout_ms", &timeout_fops);
oprofile_create_stats_files(sb, root);
if (oprofile_ops.create_files)
oprofile_ops.create_files(sb, root);
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
index bcb8f725427..687f2f4c36a 100644
--- a/include/linux/oprofile.h
+++ b/include/linux/oprofile.h
@@ -67,6 +67,9 @@ struct oprofile_operations {
/* Initiate a stack backtrace. Optional. */
void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
+
+ /* Multiplex between different events. Optional. */
+ int (*switch_events)(void);
/* CPU identification string. */
char * cpu_type;
};