summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJean Pihet <j-pihet@ti.com>2012-04-25 16:43:17 +0530
committerKevin Hilman <khilman@ti.com>2012-05-31 16:36:30 -0700
commit21ff63ad131218048525fbd37d065ce61f03bcbd (patch)
treea50d72ca4f71b341fd0cf48d72a3dce5d7a49289
parent7fb149ffe357d6ad672cf9325181530b4c478a81 (diff)
ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/
After a clean-up of the interfaces the OMAP Smartreflex IP driver is now a generic driver. Move it to drivers/power/avs/. The build is controlled by the following Kconfig options: . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support, . CONFIG_POWER_AVS_OMAP: AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or version 2 of the SmartReflex IP, . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
-rw-r--r--arch/arm/mach-omap2/Makefile4
-rw-r--r--arch/arm/plat-omap/Kconfig22
-rw-r--r--drivers/power/Kconfig2
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/avs/Kconfig12
-rw-r--r--drivers/power/avs/Makefile1
-rw-r--r--drivers/power/avs/smartreflex.c (renamed from arch/arm/mach-omap2/smartreflex.c)5
7 files changed, 22 insertions, 25 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 518444acc90..f8ee10a06f4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -70,8 +70,8 @@ obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \
cpuidle44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
-obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o smartreflex.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index bba384dfbcf..816dec062f3 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -45,26 +45,12 @@ config OMAP_DEBUG_LEDS
depends on OMAP_DEBUG_DEVICES
default y if LEDS_CLASS
-menuconfig POWER_AVS
- tristate "Adaptive Voltage Scaling class support"
- help
- AVS(Adaptive Voltage Scaling) is a power management technique which
- finely controls the operating voltage of a device in order to optimize
- (i.e. reduce) its power consumption.
- At a given operating point the voltage is adapted depending on
- static factors (chip manufacturing process) and dynamic factors
- (temperature depending performance).
- AVS is also called SmartReflex on OMAP devices.
-
- Say Y here to enable Adaptive Voltage Scaling class support.
-
-if POWER_AVS
-
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
- depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+ depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
help
- Say Y to enable AVS support on OMAP containing the version 1 or
+ Say Y to enable AVS(Adaptive Voltage Scaling)
+ support on OMAP containing the version 1 or
version 2 of the SmartReflex IP.
V1 is the 65nm version used in OMAP3430.
V2 is the update for the 45nm version of the IP used in OMAP3630
@@ -89,8 +75,6 @@ config POWER_AVS_OMAP_CLASS3
Class 3 implementation of Smartreflex employs continuous hardware
voltage calibration.
-endif # POWER_AVS
-
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_OMAP
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 99dc29f2f2f..d416773771e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -308,3 +308,5 @@ config AB8500_BATTERY_THERM_ON_BATCTRL
Say Y to enable battery temperature measurements using
thermistor connected on BATCTRL ADC.
endif # POWER_SUPPLY
+
+source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b6b243416c0..ee58afb1e71 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -43,4 +43,5 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
+obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
new file mode 100644
index 00000000000..18493f7a8f6
--- /dev/null
+++ b/drivers/power/avs/Kconfig
@@ -0,0 +1,12 @@
+menuconfig POWER_AVS
+ tristate "Adaptive Voltage Scaling class support"
+ help
+ AVS is a power management technique which finely controls the
+ operating voltage of a device in order to optimize (i.e. reduce)
+ its power consumption.
+ At a given operating point the voltage is adapted depending on
+ static factors (chip manufacturing process) and dynamic factors
+ (temperature depending performance).
+ AVS is also called SmartReflex on OMAP devices.
+
+ Say Y here to enable Adaptive Voltage Scaling class support.
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
new file mode 100644
index 00000000000..0843386a6c1
--- /dev/null
+++ b/drivers/power/avs/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o
diff --git a/arch/arm/mach-omap2/smartreflex.c b/drivers/power/avs/smartreflex.c
index 515041ccccb..44efc6e202a 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -3,7 +3,7 @@
*
* Author: Thara Gopinath <thara@ti.com>
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
@@ -27,9 +27,6 @@
#include <linux/pm_runtime.h>
#include <linux/power/smartreflex.h>
-#include "common.h"
-#include "pm.h"
-
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200