ixgbe: Use netdev_<level>, dev_<level>, pr_<level>

This patch is alternative to a previous patch submitted by Joe Perches.

Create common macros e_<level> and e_dev_<level> that use netdev_<level> and
dev_<level> similar to e1000e.
Redefined pr_fmt for driver messages.
Use %pM to display MAC address.
Aligned text to better match the new format.

CC: Joe Perches <joe@perches.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 195 insertions, 220 deletions

diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index ffae480587a..9270089eb28 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -44,11 +44,9 @@
 #include <linux/dca.h>
 #endif
 
-#define PFX "ixgbe: "
-#define DPRINTK(nlevel, klevel, fmt, args...) \
-	((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
-	printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
-		__func__ , ## args)))
+/* common prefix used by pr_<> macros */
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 /* TX/RX descriptor defines */
 #define IXGBE_DEFAULT_TXD		    512
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index a4e2901f2f0..976fd9e146c 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -707,9 +707,8 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
 
 out:
 	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
-		netif_info(adapter, hw, adapter->netdev, "Smartspeed has"
-			" downgraded the link speed from the maximum"
-			" advertised\n");
+		e_info("Smartspeed has downgraded the link speed from "
+		       "the maximum advertised\n");
 	return status;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 3080afb12bd..d5d3aae8524 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -105,12 +105,26 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
 
 #define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
 
-#ifdef DEBUG
-extern char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw);
+extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
 #define hw_dbg(hw, format, arg...) \
-	printk(KERN_DEBUG "%s: " format, ixgbe_get_hw_dev_name(hw), ##arg)
-#else
-#define hw_dbg(hw, format, arg...) do {} while (0)
-#endif
+	netdev_dbg(ixgbe_get_hw_dev(hw), format, ##arg)
+#define e_err(format, arg...) \
+	netdev_err(adapter->netdev, format, ## arg)
+#define e_info(format, arg...) \
+	netdev_info(adapter->netdev, format, ## arg)
+#define e_warn(format, arg...) \
+	netdev_warn(adapter->netdev, format, ## arg)
+#define e_notice(format, arg...) \
+	netdev_notice(adapter->netdev, format, ## arg)
+#define e_crit(format, arg...) \
+	netdev_crit(adapter->netdev, format, ## arg)
+#define e_dev_info(format, arg...) \
+	dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+	dev_warn(&adapter->pdev->dev, format, ## arg)
+#define e_dev_err(format, arg...) \
+	dev_err(&adapter->pdev->dev, format, ## arg)
+#define e_dev_notice(format, arg...) \
+	dev_notice(&adapter->pdev->dev, format, ## arg)
 
 #endif /* IXGBE_COMMON */
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 71da325dfa8..657623589d5 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -121,7 +121,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			goto out;
 
 		if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
-			DPRINTK(DRV, ERR, "Enable failed, needs MSI-X\n");
+			e_err("Enable failed, needs MSI-X\n");
 			err = 1;
 			goto out;
 		}
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index c50a7541ffe..644e3d21b75 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -294,8 +294,7 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		hw->mac.autotry_restart = true;
 		err = hw->mac.ops.setup_link(hw, advertised, true, true);
 		if (err) {
-			DPRINTK(PROBE, INFO,
-			        "setup link failed with code %d\n", err);
+			e_info("setup link failed with code %d\n", err);
 			hw->mac.ops.setup_link(hw, old, true, true);
 		}
 	} else {
@@ -1188,9 +1187,9 @@ static struct ixgbe_reg_test reg_test_82598[] = {
 		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
 		val = readl(adapter->hw.hw_addr + R);                         \
 		if (val != (_test[pat] & W & M)) {                            \
-			DPRINTK(DRV, ERR, "pattern test reg %04X failed: got "\
-					  "0x%08X expected 0x%08X\n",         \
-				R, val, (_test[pat] & W & M));                \
+			e_err("pattern test reg %04X failed: got "	\
+			      "0x%08X expected 0x%08X\n",		\
+			      R, val, (_test[pat] & W & M));                \
 			*data = R;                                            \
 			writel(before, adapter->hw.hw_addr + R);              \
 			return 1;                                             \
@@ -1206,8 +1205,8 @@ static struct ixgbe_reg_test reg_test_82598[] = {
 	writel((W & M), (adapter->hw.hw_addr + R));                           \
 	val = readl(adapter->hw.hw_addr + R);                                 \
 	if ((W & M) != (val & M)) {                                           \
-		DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
-				 "expected 0x%08X\n", R, (val & M), (W & M)); \
+		e_err("set/check reg %04X test failed: got 0x%08X "	\
+		      "expected 0x%08X\n", R, (val & M), (W & M));	\
 		*data = R;                                                    \
 		writel(before, (adapter->hw.hw_addr + R));                    \
 		return 1;                                                     \
@@ -1240,8 +1239,8 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
 	after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
 	if (value != after) {
-		DPRINTK(DRV, ERR, "failed STATUS register test got: "
-		        "0x%08X expected: 0x%08X\n", after, value);
+		e_err("failed STATUS register test got: 0x%08X expected: "
+		      "0x%08X\n", after, value);
 		*data = 1;
 		return 1;
 	}
@@ -1341,8 +1340,8 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
 		*data = 1;
 		return -1;
 	}
-	DPRINTK(HW, INFO, "testing %s interrupt\n",
-		(shared_int ? "shared" : "unshared"));
+	e_info("testing %s interrupt\n", shared_int ?
+		   "shared" : "unshared");
 
 	/* Disable all the interrupts */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
@@ -1847,7 +1846,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline tests */
 
-		DPRINTK(HW, INFO, "offline testing starting\n");
+		e_info("offline testing starting\n");
 
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result */
@@ -1880,17 +1879,17 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		else
 			ixgbe_reset(adapter);
 
-		DPRINTK(HW, INFO, "register testing starting\n");
+		e_info("register testing starting\n");
 		if (ixgbe_reg_test(adapter, &data[0]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		ixgbe_reset(adapter);
-		DPRINTK(HW, INFO, "eeprom testing starting\n");
+		e_info("eeprom testing starting\n");
 		if (ixgbe_eeprom_test(adapter, &data[1]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		ixgbe_reset(adapter);
-		DPRINTK(HW, INFO, "interrupt testing starting\n");
+		e_info("interrupt testing starting\n");
 		if (ixgbe_intr_test(adapter, &data[2]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1898,14 +1897,13 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		 * loopback diagnostic. */
 		if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
 				      IXGBE_FLAG_VMDQ_ENABLED)) {
-			DPRINTK(HW, INFO, "Skip MAC loopback diagnostic in VT "
-				"mode\n");
+			e_info("Skip MAC loopback diagnostic in VT mode\n");
 			data[3] = 0;
 			goto skip_loopback;
 		}
 
 		ixgbe_reset(adapter);
-		DPRINTK(HW, INFO, "loopback testing starting\n");
+		e_info("loopback testing starting\n");
 		if (ixgbe_loopback_test(adapter, &data[3]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
@@ -1916,7 +1914,7 @@ skip_loopback:
 		if (if_running)
 			dev_open(netdev);
 	} else {
-		DPRINTK(HW, INFO, "online testing starting\n");
+		e_info("online testing starting\n");
 		/* Online tests */
 		if (ixgbe_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -2089,8 +2087,8 @@ static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter,
 	    (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
 		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
 		adapter->netdev->features |= NETIF_F_LRO;
-		DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n",
-		        ec->rx_coalesce_usecs);
+		e_info("rx-usecs set to %d, re-enabling RSC\n",
+		       ec->rx_coalesce_usecs);
 		return true;
 	}
 	return false;
@@ -2158,8 +2156,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 			adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
 			netdev->features &= ~NETIF_F_LRO;
-			DPRINTK(PROBE, INFO,
-			        "rx-usecs set to 0, disabling RSC\n");
+			e_info("rx-usecs set to 0, disabling RSC\n");
 
 			need_reset = true;
 		}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 45182ab41d6..84e1194e083 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -25,7 +25,6 @@
 
 *******************************************************************************/
 
-
 #include "ixgbe.h"
 #ifdef CONFIG_IXGBE_DCB
 #include "ixgbe_dcb_82599.h"
@@ -165,20 +164,20 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 
 	adapter = netdev_priv(netdev);
 	if (xid >= IXGBE_FCOE_DDP_MAX) {
-		DPRINTK(DRV, WARNING, "xid=0x%x out-of-range\n", xid);
+		e_warn("xid=0x%x out-of-range\n", xid);
 		return 0;
 	}
 
 	fcoe = &adapter->fcoe;
 	if (!fcoe->pool) {
-		DPRINTK(DRV, WARNING, "xid=0x%x no ddp pool for fcoe\n", xid);
+		e_warn("xid=0x%x no ddp pool for fcoe\n", xid);
 		return 0;
 	}
 
 	ddp = &fcoe->ddp[xid];
 	if (ddp->sgl) {
-		DPRINTK(DRV, ERR, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
-			xid, ddp->sgl, ddp->sgc);
+		e_err("xid 0x%x w/ non-null sgl=%p nents=%d\n",
+			  xid, ddp->sgl, ddp->sgc);
 		return 0;
 	}
 	ixgbe_fcoe_clear_ddp(ddp);
@@ -186,14 +185,14 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 	/* setup dma from scsi command sgl */
 	dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
 	if (dmacount == 0) {
-		DPRINTK(DRV, ERR, "xid 0x%x DMA map error\n", xid);
+		e_err("xid 0x%x DMA map error\n", xid);
 		return 0;
 	}
 
 	/* alloc the udl from our ddp pool */
 	ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
 	if (!ddp->udl) {
-		DPRINTK(DRV, ERR, "failed allocated ddp context\n");
+		e_err("failed allocated ddp context\n");
 		goto out_noddp_unmap;
 	}
 	ddp->sgl = sgl;
@@ -206,10 +205,9 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 		while (len) {
 			/* max number of buffers allowed in one DDP context */
 			if (j >= IXGBE_BUFFCNT_MAX) {
-				netif_err(adapter, drv, adapter->netdev,
-					  "xid=%x:%d,%d,%d:addr=%llx "
-					  "not enough descriptors\n",
-					  xid, i, j, dmacount, (u64)addr);
+				e_err("xid=%x:%d,%d,%d:addr=%llx "
+				      "not enough descriptors\n",
+				      xid, i, j, dmacount, (u64)addr);
 				goto out_noddp_free;
 			}
 
@@ -387,8 +385,8 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
 	struct fc_frame_header *fh;
 
 	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
-		DPRINTK(DRV, ERR, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
-			skb_shinfo(skb)->gso_type);
+		e_err("Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+		      skb_shinfo(skb)->gso_type);
 		return -EINVAL;
 	}
 
@@ -414,7 +412,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
 		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
 		break;
 	default:
-		DPRINTK(DRV, WARNING, "unknown sof = 0x%x\n", sof);
+		e_warn("unknown sof = 0x%x\n", sof);
 		return -EINVAL;
 	}
 
@@ -441,7 +439,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
 		fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
 		break;
 	default:
-		DPRINTK(DRV, WARNING, "unknown eof = 0x%x\n", eof);
+		e_warn("unknown eof = 0x%x\n", eof);
 		return -EINVAL;
 	}
 
@@ -517,8 +515,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 					     adapter->pdev, IXGBE_FCPTR_MAX,
 					     IXGBE_FCPTR_ALIGN, PAGE_SIZE);
 		if (!fcoe->pool)
-			DPRINTK(DRV, ERR,
-				"failed to allocated FCoE DDP pool\n");
+			e_err("failed to allocated FCoE DDP pool\n");
 
 		spin_lock_init(&fcoe->lock);
 	}
@@ -614,7 +611,7 @@ int ixgbe_fcoe_enable(struct net_device *netdev)
 	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
 		goto out_enable;
 
-	DPRINTK(DRV, INFO, "Enabling FCoE offload features.\n");
+	e_info("Enabling FCoE offload features.\n");
 	if (netif_running(netdev))
 		netdev->netdev_ops->ndo_stop(netdev);
 
@@ -660,7 +657,7 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
 	if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
 		goto out_disable;
 
-	DPRINTK(DRV, INFO, "Disabling FCoE offload features.\n");
+	e_info("Disabling FCoE offload features.\n");
 	if (netif_running(netdev))
 		netdev->netdev_ops->ndo_stop(netdev);
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d571d101de0..04e64de4a60 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -696,19 +696,19 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
 		/* detected Tx unit hang */
 		union ixgbe_adv_tx_desc *tx_desc;
 		tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
-		DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
-			"  Tx Queue             <%d>\n"
-			"  TDH, TDT             <%x>, <%x>\n"
-			"  next_to_use          <%x>\n"
-			"  next_to_clean        <%x>\n"
-			"tx_buffer_info[next_to_clean]\n"
-			"  time_stamp           <%lx>\n"
-			"  jiffies              <%lx>\n",
-			tx_ring->queue_index,
-			IXGBE_READ_REG(hw, tx_ring->head),
-			IXGBE_READ_REG(hw, tx_ring->tail),
-			tx_ring->next_to_use, eop,
-			tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+		e_err("Detected Tx Unit Hang\n"
+		      "  Tx Queue             <%d>\n"
+		      "  TDH, TDT             <%x>, <%x>\n"
+		      "  next_to_use          <%x>\n"
+		      "  next_to_clean        <%x>\n"
+		      "tx_buffer_info[next_to_clean]\n"
+		      "  time_stamp           <%lx>\n"
+		      "  jiffies              <%lx>\n",
+		      tx_ring->queue_index,
+		      IXGBE_READ_REG(hw, tx_ring->head),
+		      IXGBE_READ_REG(hw, tx_ring->tail),
+		      tx_ring->next_to_use, eop,
+		      tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
 		return true;
 	}
 
@@ -812,9 +812,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 	if (adapter->detect_tx_hung) {
 		if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
 			/* schedule immediate reset if we believe we hung */
-			DPRINTK(PROBE, INFO,
-			        "tx hang %d detected, resetting adapter\n",
-			        adapter->tx_timeout_count + 1);
+			e_info("tx hang %d detected, resetting adapter\n",
+			       adapter->tx_timeout_count + 1);
 			ixgbe_tx_timeout(adapter->netdev);
 		}
 	}
@@ -1653,10 +1652,10 @@ static void ixgbe_check_overtemp_task(struct work_struct *work)
 				return;
 			break;
 		}
-		DPRINTK(DRV, ERR, "Network adapter has been stopped because it "
-		        "has over heated. Restart the computer. If the problem "
-		        "persists, power off the system and replace the "
-		        "adapter\n");
+		e_crit("Network adapter has been stopped because it "
+		       "has over heated. Restart the computer. If the problem "
+		       "persists, power off the system and replace the "
+		       "adapter\n");
 		/* write to clear the interrupt */
 		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0);
 	}
@@ -1668,7 +1667,7 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
 
 	if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
 	    (eicr & IXGBE_EICR_GPI_SDP1)) {
-		DPRINTK(PROBE, CRIT, "Fan has stopped, replace the adapter\n");
+		e_crit("Fan has stopped, replace the adapter\n");
 		/* write to clear the interrupt */
 		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
 	}
@@ -2154,9 +2153,8 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 		                  handler, 0, adapter->name[vector],
 		                  adapter->q_vector[vector]);
 		if (err) {
-			DPRINTK(PROBE, ERR,
-			        "request_irq failed for MSIX interrupt "
-			        "Error: %d\n", err);
+			e_err("request_irq failed for MSIX interrupt: "
+			      "Error: %d\n", err);
 			goto free_queue_irqs;
 		}
 	}
@@ -2165,8 +2163,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 	err = request_irq(adapter->msix_entries[vector].vector,
 	                  ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
 	if (err) {
-		DPRINTK(PROBE, ERR,
-			"request_irq for msix_lsc failed: %d\n", err);
+		e_err("request_irq for msix_lsc failed: %d\n", err);
 		goto free_queue_irqs;
 	}
 
@@ -2352,7 +2349,7 @@ static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
 	}
 
 	if (err)
-		DPRINTK(PROBE, ERR, "request_irq failed, Error %d\n", err);
+		e_err("request_irq failed, Error %d\n", err);
 
 	return err;
 }
@@ -2423,7 +2420,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
 	map_vector_to_rxq(adapter, 0, 0);
 	map_vector_to_txq(adapter, 0, 0);
 
-	DPRINTK(HW, INFO, "Legacy interrupt IVAR setup done\n");
+	e_info("Legacy interrupt IVAR setup done\n");
 }
 
 /**
@@ -3257,8 +3254,8 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 			msleep(1);
 	}
 	if (k >= IXGBE_MAX_RX_DESC_POLL) {
-		DPRINTK(DRV, ERR, "RXDCTL.ENABLE on Rx queue %d "
-		        "not set within the polling period\n", rxr);
+		e_err("RXDCTL.ENABLE on Rx queue %d not set within "
+		      "the polling period\n", rxr);
 	}
 	ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
 	                      (adapter->rx_ring[rxr]->count - 1));
@@ -3387,8 +3384,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 			} while (--wait_loop &&
 			         !(txdctl & IXGBE_TXDCTL_ENABLE));
 			if (!wait_loop)
-				DPRINTK(DRV, ERR, "Could not enable "
-				        "Tx Queue %d\n", j);
+				e_err("Could not enable Tx Queue %d\n", j);
 		}
 	}
 
@@ -3436,8 +3432,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
 		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
 		if (esdp & IXGBE_ESDP_SDP1)
-			DPRINTK(DRV, CRIT,
-				"Fan has stopped, replace the adapter\n");
+			e_crit("Fan has stopped, replace the adapter\n");
 	}
 
 	/*
@@ -3466,7 +3461,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	} else {
 		err = ixgbe_non_sfp_link_config(hw);
 		if (err)
-			DPRINTK(PROBE, ERR, "link_config FAILED %d\n", err);
+			e_err("link_config FAILED %d\n", err);
 	}
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
@@ -3527,19 +3522,19 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
 	case IXGBE_ERR_SFP_NOT_PRESENT:
 		break;
 	case IXGBE_ERR_MASTER_REQUESTS_PENDING:
-		dev_err(&adapter->pdev->dev, "master disable timed out\n");
+		e_dev_err("master disable timed out\n");
 		break;
 	case IXGBE_ERR_EEPROM_VERSION:
 		/* We are running on a pre-production device, log a warning */
-		dev_warn(&adapter->pdev->dev, "This device is a pre-production "
-		         "adapter/LOM.  Please be aware there may be issues "
-		         "associated with your hardware.  If you are "
-		         "experiencing problems please contact your Intel or "
-		         "hardware representative who provided you with this "
-		         "hardware.\n");
+		e_dev_warn("This device is a pre-production adapter/LOM. "
+			   "Please be aware there may be issuesassociated with "
+			   "your hardware.  If you are experiencing problems "
+			   "please contact your Intel or hardware "
+			   "representative who provided you with this "
+			   "hardware.\n");
 		break;
 	default:
-		dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
+		e_dev_err("Hardware Error: %d\n", err);
 	}
 
 	/* reprogram the RAR[0] in case user changed it. */
@@ -3920,12 +3915,12 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
 		adapter->num_tx_queues = 1;
 #ifdef CONFIG_IXGBE_DCB
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			DPRINTK(PROBE, INFO, "FCoE enabled with DCB\n");
+			e_info("FCoE enabled with DCB\n");
 			ixgbe_set_dcb_queues(adapter);
 		}
 #endif
 		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-			DPRINTK(PROBE, INFO, "FCoE enabled with RSS\n");
+			e_info("FCoE enabled with RSS\n");
 			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
 			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
 				ixgbe_set_fdir_queues(adapter);
@@ -4038,7 +4033,8 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 		 * This just means we'll go with either a single MSI
 		 * vector or fall back to legacy interrupts.
 		 */
-		DPRINTK(HW, DEBUG, "Unable to allocate MSI-X interrupts\n");
+		netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+			     "Unable to allocate MSI-X interrupts\n");
 		adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
@@ -4435,8 +4431,9 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 	if (!err) {
 		adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
 	} else {
-		DPRINTK(HW, DEBUG, "Unable to allocate MSI interrupt, "
-		        "falling back to legacy.  Error: %d\n", err);
+		netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+			     "Unable to allocate MSI interrupt, "
+			     "falling back to legacy.  Error: %d\n", err);
 		/* reset err */
 		err = 0;
 	}
@@ -4557,27 +4554,25 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 
 	err = ixgbe_set_interrupt_capability(adapter);
 	if (err) {
-		DPRINTK(PROBE, ERR, "Unable to setup interrupt capabilities\n");
+		e_dev_err("Unable to setup interrupt capabilities\n");
 		goto err_set_interrupt;
 	}
 
 	err = ixgbe_alloc_q_vectors(adapter);
 	if (err) {
-		DPRINTK(PROBE, ERR, "Unable to allocate memory for queue "
-		        "vectors\n");
+		e_dev_err("Unable to allocate memory for queue vectors\n");
 		goto err_alloc_q_vectors;
 	}
 
 	err = ixgbe_alloc_queues(adapter);
 	if (err) {
-		DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
+		e_dev_err("Unable to allocate memory for queues\n");
 		goto err_alloc_queues;
 	}
 
-	DPRINTK(DRV, INFO, "Multiqueue %s: Rx Queue count = %u, "
-	        "Tx Queue count = %u\n",
-	        (adapter->num_rx_queues > 1) ? "Enabled" :
-	        "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+	e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
+	       (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+	       adapter->num_rx_queues, adapter->num_tx_queues);
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
 
@@ -4648,15 +4643,13 @@ static void ixgbe_sfp_task(struct work_struct *work)
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-			dev_err(&adapter->pdev->dev, "failed to initialize "
-				"because an unsupported SFP+ module type "
-				"was detected.\n"
-				"Reload the driver after installing a "
-				"supported module.\n");
+			e_dev_err("failed to initialize because an unsupported "
+				  "SFP+ module type was detected.\n");
+			e_dev_err("Reload the driver after installing a "
+				  "supported module.\n");
 			unregister_netdev(adapter->netdev);
 		} else {
-			DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
-			        hw->phy.sfp_type);
+			e_info("detected SFP+: %d\n", hw->phy.sfp_type);
 		}
 		/* don't need this routine any more */
 		clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
@@ -4783,7 +4776,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 
 	/* initialize eeprom parameters */
 	if (ixgbe_init_eeprom_params_generic(hw)) {
-		dev_err(&pdev->dev, "EEPROM initialization failed\n");
+		e_dev_err("EEPROM initialization failed\n");
 		return -EIO;
 	}
 
@@ -4836,8 +4829,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 err:
 	vfree(tx_ring->tx_buffer_info);
 	tx_ring->tx_buffer_info = NULL;
-	DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit "
-	                    "descriptor ring\n");
+	e_err("Unable to allocate memory for the Tx descriptor ring\n");
 	return -ENOMEM;
 }
 
@@ -4859,7 +4851,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 		err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
 		if (!err)
 			continue;
-		DPRINTK(PROBE, ERR, "Allocation for Tx Queue %u failed\n", i);
+		e_err("Allocation for Tx Queue %u failed\n", i);
 		break;
 	}
 
@@ -4884,8 +4876,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
 	if (!rx_ring->rx_buffer_info)
 		rx_ring->rx_buffer_info = vmalloc(size);
 	if (!rx_ring->rx_buffer_info) {
-		DPRINTK(PROBE, ERR,
-		        "vmalloc allocation failed for the rx desc ring\n");
+		e_err("vmalloc allocation failed for the Rx desc ring\n");
 		goto alloc_failed;
 	}
 	memset(rx_ring->rx_buffer_info, 0, size);
@@ -4898,8 +4889,7 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
 					   &rx_ring->dma, GFP_KERNEL);
 
 	if (!rx_ring->desc) {
-		DPRINTK(PROBE, ERR,
-		        "Memory allocation failed for the rx desc ring\n");
+		e_err("Memory allocation failed for the Rx desc ring\n");
 		vfree(rx_ring->rx_buffer_info);
 		goto alloc_failed;
 	}
@@ -4932,7 +4922,7 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 		err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
 		if (!err)
 			continue;
-		DPRINTK(PROBE, ERR, "Allocation for Rx Queue %u failed\n", i);
+		e_err("Allocation for Rx Queue %u failed\n", i);
 		break;
 	}
 
@@ -5031,8 +5021,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
 	if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
 		return -EINVAL;
 
-	DPRINTK(PROBE, INFO, "changing MTU from %d to %d\n",
-	        netdev->mtu, new_mtu);
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	/* must set new MTU before calling down or up */
 	netdev->mtu = new_mtu;
 
@@ -5145,8 +5134,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	err = pci_enable_device_mem(pdev);
 	if (err) {
-		printk(KERN_ERR "ixgbe: Cannot enable PCI device from "
-				"suspend\n");
+		e_dev_err("Cannot enable PCI device from suspend\n");
 		return err;
 	}
 	pci_set_master(pdev);
@@ -5155,8 +5143,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	err = ixgbe_init_interrupt_scheme(adapter);
 	if (err) {
-		printk(KERN_ERR "ixgbe: Cannot initialize interrupts for "
-		                "device\n");
+		e_dev_err("Cannot initialize interrupts for device\n");
 		return err;
 	}
 
@@ -5512,10 +5499,10 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 	err = hw->phy.ops.identify_sfp(hw);
 
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to initialize because "
-			"an unsupported SFP+ module type was detected.\n"
-			"Reload the driver after installing a supported "
-			"module.\n");
+		e_dev_err("failed to initialize because an unsupported SFP+ "
+			  "module type was detected.\n");
+		e_dev_err("Reload the driver after installing a supported "
+			  "module.\n");
 		unregister_netdev(adapter->netdev);
 		return;
 	}
@@ -5544,8 +5531,8 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
 			set_bit(__IXGBE_FDIR_INIT_DONE,
 			        &(adapter->tx_ring[i]->reinit_state));
 	} else {
-		DPRINTK(PROBE, ERR, "failed to finish FDIR re-initialization, "
-			"ignored adding FDIR ATR filters\n");
+		e_err("failed to finish FDIR re-initialization, "
+		      "ignored adding FDIR ATR filters\n");
 	}
 	/* Done FDIR Re-initialization, enable transmits */
 	netif_tx_start_all_queues(adapter->netdev);
@@ -5616,16 +5603,14 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 				flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
 			}
 
-			printk(KERN_INFO "ixgbe: %s NIC Link is Up %s, "
-			       "Flow Control: %s\n",
-			       netdev->name,
+			e_info("NIC Link is Up %s, Flow Control: %s\n",
 			       (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
-			        "10 Gbps" :
-			        (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
-			         "1 Gbps" : "unknown speed")),
+			       "10 Gbps" :
+			       (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+			       "1 Gbps" : "unknown speed")),
 			       ((flow_rx && flow_tx) ? "RX/TX" :
-			        (flow_rx ? "RX" :
-			        (flow_tx ? "TX" : "None"))));
+			       (flow_rx ? "RX" :
+			       (flow_tx ? "TX" : "None"))));
 
 			netif_carrier_on(netdev);
 		} else {
@@ -5636,8 +5621,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 		adapter->link_up = false;
 		adapter->link_speed = 0;
 		if (netif_carrier_ok(netdev)) {
-			printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
-			       netdev->name);
+			e_info("NIC Link is Down\n");
 			netif_carrier_off(netdev);
 		}
 	}
@@ -5813,9 +5797,8 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 				break;
 			default:
 				if (unlikely(net_ratelimit())) {
-					DPRINTK(PROBE, WARNING,
-					 "partial checksum but proto=%x!\n",
-					 skb->protocol);
+					e_warn("partial checksum but "
+					       "proto=%x!\n", skb->protocol);
 				}
 				break;
 			}
@@ -5926,7 +5909,7 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 	return count;
 
 dma_error:
-	dev_err(&pdev->dev, "TX DMA map failed\n");
+	e_dev_err("TX DMA map failed\n");
 
 	/* clear timestamp and dma mappings for failed tx_buffer_info map */
 	tx_buffer_info->dma = 0;
@@ -6423,8 +6406,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
 	err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
 	if (err) {
-		DPRINTK(PROBE, ERR,
-			"Failed to enable PCI sriov: %d\n", err);
+		e_err("Failed to enable PCI sriov: %d\n", err);
 		goto err_novfs;
 	}
 	/* If call to enable VFs succeeded then allocate memory
@@ -6448,9 +6430,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 	}
 
 	/* Oh oh */
-	DPRINTK(PROBE, ERR,
-		"Unable to allocate memory for VF "
-		"Data Storage - SRIOV disabled\n");
+	e_err("Unable to allocate memory for VF Data Storage - SRIOV "
+	      "disabled\n");
 	pci_disable_sriov(adapter->pdev);
 
 err_novfs:
@@ -6498,8 +6479,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 			err = dma_set_coherent_mask(&pdev->dev,
 						    DMA_BIT_MASK(32));
 			if (err) {
-				dev_err(&pdev->dev, "No usable DMA "
-				        "configuration, aborting\n");
+				e_dev_err("No usable DMA configuration, "
+					  "aborting\n");
 				goto err_dma;
 			}
 		}
@@ -6509,8 +6490,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
 	                                   IORESOURCE_MEM), ixgbe_driver_name);
 	if (err) {
-		dev_err(&pdev->dev,
-		        "pci_request_selected_regions failed 0x%x\n", err);
+		e_dev_err("pci_request_selected_regions failed 0x%x\n", err);
 		goto err_pci_reg;
 	}
 
@@ -6621,8 +6601,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
 		u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
 		if (esdp & IXGBE_ESDP_SDP1)
-			DPRINTK(PROBE, CRIT,
-				"Fan has stopped, replace the adapter\n");
+			e_crit("Fan has stopped, replace the adapter\n");
 	}
 
 	/* reset_hw fills in the perm_addr as well */
@@ -6641,19 +6620,19 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 			  round_jiffies(jiffies + (2 * HZ)));
 		err = 0;
 	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to initialize because "
-			"an unsupported SFP+ module type was detected.\n"
-			"Reload the driver after installing a supported "
-			"module.\n");
+		e_dev_err("failed to initialize because an unsupported SFP+ "
+			  "module type was detected.\n");
+		e_dev_err("Reload the driver after installing a supported "
+			  "module.\n");
 		goto err_sw_init;
 	} else if (err) {
-		dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
+		e_dev_err("HW Init failed: %d\n", err);
 		goto err_sw_init;
 	}
 
 	ixgbe_probe_vf(adapter, ii);
 
-	netdev->features = NETIF_F_SG |
+	netdev->features =    NETIF_F_SG |
 	                   NETIF_F_IP_CSUM |
 	                   NETIF_F_HW_VLAN_TX |
 	                   NETIF_F_HW_VLAN_RX |
@@ -6700,7 +6679,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	/* make sure the EEPROM is good */
 	if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
-		dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
+		e_dev_err("The EEPROM Checksum Is Not Valid\n");
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -6709,7 +6688,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
 
 	if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
-		dev_err(&pdev->dev, "invalid MAC address\n");
+		e_dev_err("invalid MAC address\n");
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -6744,7 +6723,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	hw->mac.ops.get_bus_info(hw);
 
 	/* print bus type/speed/width info */
-	dev_info(&pdev->dev, "(PCI Express:%s:%s) %pM\n",
+	e_dev_info("(PCI Express:%s:%s) %pM\n",
 	        ((hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0Gb/s":
 	         (hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5Gb/s":"Unknown"),
 	        ((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
@@ -6754,20 +6733,20 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	        netdev->dev_addr);
 	ixgbe_read_pba_num_generic(hw, &part_num);
 	if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
-		dev_info(&pdev->dev, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %06x-%03x\n",
-		         hw->mac.type, hw->phy.type, hw->phy.sfp_type,
-		         (part_num >> 8), (part_num & 0xff));
+		e_dev_info("MAC: %d, PHY: %d, SFP+: %d, "
+			   "PBA No: %06x-%03x\n",
+			   hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+			   (part_num >> 8), (part_num & 0xff));
 	else
-		dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-		         hw->mac.type, hw->phy.type,
-		         (part_num >> 8), (part_num & 0xff));
+		e_dev_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+			   hw->mac.type, hw->phy.type,
+			   (part_num >> 8), (part_num & 0xff));
 
 	if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
-		dev_warn(&pdev->dev, "PCI-Express bandwidth available for "
-		         "this card is not sufficient for optimal "
-		         "performance.\n");
-		dev_warn(&pdev->dev, "For optimal performance a x8 "
-		         "PCI-Express slot is required.\n");
+		e_dev_warn("PCI-Express bandwidth available for this card is "
+			   "not sufficient for optimal performance.\n");
+		e_dev_warn("For optimal performance a x8 PCI-Express slot "
+			   "is required.\n");
 	}
 
 	/* save off EEPROM version number */
@@ -6778,12 +6757,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	if (err == IXGBE_ERR_EEPROM_VERSION) {
 		/* We are running on a pre-production device, log a warning */
-		dev_warn(&pdev->dev, "This device is a pre-production "
-		         "adapter/LOM.  Please be aware there may be issues "
-		         "associated with your hardware.  If you are "
-		         "experiencing problems please contact your Intel or "
-		         "hardware representative who provided you with this "
-		         "hardware.\n");
+		e_dev_warn("This device is a pre-production adapter/LOM. "
+			   "Please be aware there may be issues associated "
+			   "with your hardware.  If you are experiencing "
+			   "problems please contact your Intel or hardware "
+			   "representative who provided you with this "
+			   "hardware.\n");
 	}
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
@@ -6806,8 +6785,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	}
 #endif
 	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-		DPRINTK(PROBE, INFO, "IOV is enabled with %d VFs\n",
-			adapter->num_vfs);
+		e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
 		for (i = 0; i < adapter->num_vfs; i++)
 			ixgbe_vf_configuration(pdev, (i | 0x10000000));
 	}
@@ -6815,7 +6793,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	/* add san mac addr to netdev */
 	ixgbe_add_sanmac_netdev(netdev);
 
-	dev_info(&pdev->dev, "Intel(R) 10 Gigabit Network Connection\n");
+	e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
 	cards_found++;
 	return 0;
 
@@ -6905,7 +6883,7 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	pci_release_selected_regions(pdev, pci_select_bars(pdev,
 	                             IORESOURCE_MEM));
 
-	DPRINTK(PROBE, INFO, "complete\n");
+	e_dev_info("complete\n");
 
 	free_netdev(netdev);
 
@@ -6955,8 +6933,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 	int err;
 
 	if (pci_enable_device_mem(pdev)) {
-		DPRINTK(PROBE, ERR,
-		        "Cannot re-enable PCI device after reset.\n");
+		e_err("Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
 	} else {
 		pci_set_master(pdev);
@@ -6972,8 +6949,8 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 
 	err = pci_cleanup_aer_uncorrect_error_status(pdev);
 	if (err) {
-		dev_err(&pdev->dev,
-		  "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n", err);
+		e_dev_err("pci_cleanup_aer_uncorrect_error_status "
+			  "failed 0x%0x\n", err);
 		/* non-fatal, continue */
 	}
 
@@ -6994,7 +6971,7 @@ static void ixgbe_io_resume(struct pci_dev *pdev)
 
 	if (netif_running(netdev)) {
 		if (ixgbe_up(adapter)) {
-			DPRINTK(PROBE, INFO, "ixgbe_up failed after reset\n");
+			e_info("ixgbe_up failed after reset\n");
 			return;
 		}
 	}
@@ -7030,10 +7007,9 @@ static struct pci_driver ixgbe_driver = {
 static int __init ixgbe_init_module(void)
 {
 	int ret;
-	printk(KERN_INFO "%s: %s - version %s\n", ixgbe_driver_name,
-	       ixgbe_driver_string, ixgbe_driver_version);
-
-	printk(KERN_INFO "%s: %s\n", ixgbe_driver_name, ixgbe_copyright);
+	pr_info("%s - version %s\n", ixgbe_driver_string,
+		   ixgbe_driver_version);
+	pr_info("%s\n", ixgbe_copyright);
 
 #ifdef CONFIG_IXGBE_DCA
 	dca_register_notify(&dca_notifier);
@@ -7072,18 +7048,17 @@ static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
 }
 
 #endif /* CONFIG_IXGBE_DCA */
-#ifdef DEBUG
+
 /**
- * ixgbe_get_hw_dev_name - return device name string
+ * ixgbe_get_hw_dev return device
  * used by hardware layer to print debugging information
  **/
-char *ixgbe_get_hw_dev_name(struct ixgbe_hw *hw)
+struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw)
 {
 	struct ixgbe_adapter *adapter = hw->back;
-	return adapter->netdev->name;
+	return adapter->netdev;
 }
 
-#endif
 module_exit(ixgbe_exit_module);
 
 /* ixgbe_main.c */
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index f6cee94ec8e..66f6e62b8cb 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -25,7 +25,6 @@
 
 *******************************************************************************/
 
-
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -174,7 +173,7 @@ int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
 	adapter->vfinfo[vf].rar = hw->mac.ops.set_rar(hw, vf + 1, mac_addr,
 	                                              vf, IXGBE_RAH_AV);
 	if (adapter->vfinfo[vf].rar < 0) {
-		DPRINTK(DRV, ERR, "Could not set MAC Filter for VF %d\n", vf);
+		e_err("Could not set MAC Filter for VF %d\n", vf);
 		return -1;
 	}
 
@@ -194,11 +193,7 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 
 	if (enable) {
 		random_ether_addr(vf_mac_addr);
-		DPRINTK(PROBE, INFO, "IOV: VF %d is enabled "
-		       "mac %02X:%02X:%02X:%02X:%02X:%02X\n",
-		       vfn,
-		       vf_mac_addr[0], vf_mac_addr[1], vf_mac_addr[2],
-		       vf_mac_addr[3], vf_mac_addr[4], vf_mac_addr[5]);
+		e_info("IOV: VF %d is enabled MAC %pM\n", vfn, vf_mac_addr);
 		/*
 		 * Store away the VF "permananet" MAC address, it will ask
 		 * for it later.
@@ -243,7 +238,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
 
 	if (retval)
-		printk(KERN_ERR "Error receiving message from VF\n");
+		pr_err("Error receiving message from VF\n");
 
 	/* this is a message we already processed, do nothing */
 	if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
@@ -257,7 +252,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 	if (msgbuf[0] == IXGBE_VF_RESET) {
 		unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
 		u8 *addr = (u8 *)(&msgbuf[1]);
-		DPRINTK(PROBE, INFO, "VF Reset msg received from vf %d\n", vf);
+		e_info("VF Reset msg received from vf %d\n", vf);
 		adapter->vfinfo[vf].clear_to_send = false;
 		ixgbe_vf_reset_msg(adapter, vf);
 		adapter->vfinfo[vf].clear_to_send = true;
@@ -310,7 +305,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 		retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
 		break;
 	default:
-		DPRINTK(DRV, ERR, "Unhandled Msg %8.8x\n", msgbuf[0]);
+		e_err("Unhandled Msg %8.8x\n", msgbuf[0]);
 		retval = IXGBE_ERR_MBX;
 		break;
 	}