diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-08-25 17:33:33 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-08-25 17:33:33 -0700 |
commit | 9acb172543aecb783e2e1e53e3f447d4c0f5c150 (patch) | |
tree | 08524a97b260f64084c8b31c4dae5eed23f2d032 | |
parent | 267560874cb0189f28e7ae6dfbc8e98b8848be98 (diff) | |
parent | 57f0b2014135235d5bf03834dee1284629ce50d2 (diff) |
Merge tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc fixes from Arnd Bergmann:
"Bug fixes for various ARM platforms. About half of these are for OMAP
and submitted before but did not make it into v3.6-rc2."
* tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
ARM: imx6: spin the cpu until hardware takes it down
ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
ARM: Kirkwood: fix Makefile.boot
ARM: Kirkwood: Fix iconnect leds
ARM: Orion: Set eth packet size csum offload limit
ARM: mv78xx0: fix win_cfg_base prototype
ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*()
ARM: mmp: fix potential NULL dereference
ARM: OMAP4: Register the OPP table only for 4430 device
cpufreq: OMAP: Handle missing frequency table on SMP systems
ARM: OMAP4: sleep: Save the complete used register stack frame
...
49 files changed, 174 insertions, 101 deletions
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa..1dd622546d0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,<chip>-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18fee9f..c5f9ae5dbd1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e..bd0cff3f808 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea..59d9789e550 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d94704510..f8ca6fa8819 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7e..d351b27d721 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf..da6845493ca 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a..6321567d8ea 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d..4e574c24581 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274..73f2bce097e 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4c..d004d37ad9d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e2..4233d9e3531 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb128a..7e49deb128a 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1a..f8f7437c83b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a7..045b3f6a387 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a5717558ee8..a13299d758e 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfc..3226077735b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f951937..7e8a5a2e1ec 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710ef..a9bc84180d2 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9..3057f7d4329 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f77..fcd4e85c4dd 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,13 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482..28214483aab 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5e..0d362e9f9cb 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457..c1875862679 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166..a0b4a42836a 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc6..288bee6cbb7 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a1..76f9b3c2f58 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101..c95415da23c 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65db..05bd8f02723 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b19..91e71d8f46f 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba5..db5ff664237 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0d..410291c6766 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b6603..ee99fd56c04 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79ca..53d3d46dec1 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 99604803874..df15646036a 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1..a534d8880de 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a..938b50a3343 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcff..bb5d08a70db 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f106..324d31b1485 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a13678..7f7b112accc 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc01..b8b747a9d36 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb21360..ae2377ef63e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f7538..db98e7021f0 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce3553..fc49f3dabd7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 00000000000..331d046ac2c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdb..15070284343 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 17fa04d08be..b47034e650a 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - if (atomic_inc_return(&freq_table_users) == 1) + if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); if (result) { @@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } + atomic_inc_return(&freq_table_users); + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (result) goto fail_table; diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 040b13b5c14..279b1eaa8b7 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; } #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); +#else +static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a) +{ +} #endif /****************************** diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 51bf8ada6dc..49258e0ed1c 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -15,6 +15,8 @@ #define MV643XX_ETH_SIZE_REG_4 0x2224 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 +#define MV643XX_TX_CSUM_DEFAULT_LIMIT 0 + struct mv643xx_eth_shared_platform_data { struct mbus_dram_target_info *dram; struct platform_device *shared_smi; |