[PATCH] IRQ type flags

Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 files changed, 80 insertions, 61 deletions

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 869c466e625..b5645c4462c 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -684,8 +684,12 @@ int setup_irq(unsigned int irq, struct irqaction *new)
 	spin_lock_irqsave(&irq_controller_lock, flags);
 	p = &desc->action;
 	if ((old = *p) != NULL) {
-		/* Can't share interrupts unless both agree to */
-		if (!(old->flags & new->flags & SA_SHIRQ)) {
+		/*
+		 * Can't share interrupts unless both agree to and are
+		 * the same type.
+		 */
+		if (!(old->flags & new->flags & SA_SHIRQ) ||
+		    (~old->flags & new->flags) & SA_TRIGGER_MASK) {
 			spin_unlock_irqrestore(&irq_controller_lock, flags);
 			return -EBUSY;
 		}
@@ -705,6 +709,12 @@ int setup_irq(unsigned int irq, struct irqaction *new)
 		desc->running = 0;
 		desc->pending = 0;
 		desc->disable_depth = 1;
+
+		if (new->flags & SA_TRIGGER_MASK) {
+			unsigned int type = new->flags & SA_TRIGGER_MASK;
+			desc->chip->set_type(irq, type);
+		}
+
 		if (!desc->noautoenable) {
 			desc->disable_depth = 0;
 			desc->chip->unmask(irq);
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index fcfb81d13cf..7a68f098a02 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -252,9 +252,8 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
 		return;
 	}
 	omap_set_gpio_direction(gpio_nr, 1);
-	set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING);
 	ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
-			  0, "serial wakeup", NULL);
+			  SA_TRIGGER_RISING, "serial wakeup", NULL);
 	if (ret) {
 		omap_free_gpio(gpio_nr);
 		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 100fb31b515..5a7b873f29b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -213,15 +213,14 @@ static int corgi_mci_init(struct device *dev, irqreturn_t (*corgi_detect_int)(in
 
 	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, SA_INTERRUPT,
-			     "MMC card detect", data);
+	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+			  SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+			  "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
 		return -1;
 	}
 
-	set_irq_type(CORGI_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index eef3de26ad3..663c9500598 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -146,15 +146,14 @@ static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(
 
 	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
-	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT,
-			     "MMC card detect", data);
+	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
+			  SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+			  "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
 		return -1;
 	}
 
-	set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f2007db0cda..a9eacc06555 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -296,15 +296,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
 
 	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
-	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, SA_INTERRUPT,
-			     "MMC card detect", data);
+	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
+			  SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+			  "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
 		return -1;
 	}
 
-	set_irq_type(SPITZ_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 5098b50158a..495f8c6ffcb 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -84,13 +84,13 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 	int ret;
 
 	if (on) {
-		ret = request_irq(IRQ_USBOC, usb_simtec_ocirq, SA_INTERRUPT,
+		ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+				  SA_INTERRUPT | SA_TRIGGER_RISING |
+				   SA_TRIGGER_FALLING,
 				  "USB Over-current", info);
 		if (ret != 0) {
 			printk(KERN_ERR "failed to request usb oc irq\n");
 		}
-
-		set_irq_type(IRQ_USBOC, IRQT_BOTHEDGE);
 	} else {
 		free_irq(IRQ_USBOC, info);
 	}
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index e70b3db69ed..1af3dfbb808 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -494,6 +494,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 {
 	struct tps65010		*tps;
 	int			status;
+	unsigned long		irqflags;
 
 	if (the_tps) {
 		dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
@@ -520,13 +521,14 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 	}
 
 #ifdef	CONFIG_ARM
+	irqflags = SA_SAMPLE_RANDOM | SA_TRIGGER_LOW;
 	if (machine_is_omap_h2()) {
 		tps->model = TPS65010;
 		omap_cfg_reg(W4_GPIO58);
 		tps->irq = OMAP_GPIO_IRQ(58);
 		omap_request_gpio(58);
 		omap_set_gpio_direction(58, 1);
-		set_irq_type(tps->irq, IRQT_FALLING);
+		irqflags |= SA_TRIGGER_FALLING;
 	}
 	if (machine_is_omap_osk()) {
 		tps->model = TPS65010;
@@ -534,7 +536,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 		tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
 		omap_request_gpio(OMAP_MPUIO(1));
 		omap_set_gpio_direction(OMAP_MPUIO(1), 1);
-		set_irq_type(tps->irq, IRQT_FALLING);
+		irqflags |= SA_TRIGGER_FALLING;
 	}
 	if (machine_is_omap_h3()) {
 		tps->model = TPS65013;
@@ -542,13 +544,12 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 		// FIXME set up this board's IRQ ...
 	}
 #else
-#define set_irq_type(num,trigger)	do{}while(0)
+	irqflags = SA_SAMPLE_RANDOM;
 #endif
 
 	if (tps->irq > 0) {
-		set_irq_type(tps->irq, IRQT_LOW);
 		status = request_irq(tps->irq, tps65010_irq,
-			SA_SAMPLE_RANDOM, DRIVER_NAME, tps);
+			irqflags, DRIVER_NAME, tps);
 		if (status < 0) {
 			dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n",
 					tps->irq, status);
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 64672d49122..e301ee4ca26 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -19,7 +19,6 @@
 #include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/irq.h>
 
 #include <asm/arch/corgi.h>
 #include <asm/arch/hardware.h>
@@ -343,10 +342,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) {
 		pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
 		if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt,
-						SA_INTERRUPT, "corgikbd", corgikbd))
+				SA_INTERRUPT | SA_TRIGGER_RISING,
+				"corgikbd", corgikbd))
 			printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i);
-		else
-			set_irq_type(CORGI_IRQ_GPIO_KEY_SENSE(i),IRQT_RISING);
 	}
 
 	/* Set Strobe lines as outputs - set high */
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 6a15fe3bc52..83999d58312 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -19,7 +19,6 @@
 #include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/irq.h>
 
 #include <asm/arch/spitz.h>
 #include <asm/arch/hardware.h>
@@ -407,10 +406,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
 	for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) {
 		pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
 		if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt,
-						SA_INTERRUPT, "Spitzkbd Sense", spitzkbd))
+				SA_INTERRUPT|SA_TRIGGER_RISING,
+				"Spitzkbd Sense", spitzkbd))
 			printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i);
-		else
-			set_irq_type(IRQ_GPIO(spitz_senses[i]),IRQT_RISING);
 	}
 
 	/* Set Strobe lines as outputs - set high */
@@ -422,15 +420,18 @@ static int __init spitzkbd_probe(struct platform_device *dev)
 	pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN);
 	pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN);
 
-	request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd Sync", spitzkbd);
-	request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd PwrOn", spitzkbd);
-	request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWA", spitzkbd);
-	request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWB", spitzkbd);
-
-	set_irq_type(SPITZ_IRQ_GPIO_SYNC, IRQT_BOTHEDGE);
-	set_irq_type(SPITZ_IRQ_GPIO_ON_KEY, IRQT_BOTHEDGE);
-	set_irq_type(SPITZ_IRQ_GPIO_SWA, IRQT_BOTHEDGE);
-	set_irq_type(SPITZ_IRQ_GPIO_SWB, IRQT_BOTHEDGE);
+	request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt,
+		    SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+		    "Spitzkbd Sync", spitzkbd);
+	request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt,
+		    SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+		    "Spitzkbd PwrOn", spitzkbd);
+	request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr,
+		    SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+		    "Spitzkbd SWA", spitzkbd);
+	request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
+		    SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+		    "Spitzkbd SWB", spitzkbd);
 
 	printk(KERN_INFO "input: Spitz Keyboard Registered\n");
 
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index e335d54c465..b42e0fbab59 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -27,7 +27,6 @@
 
 #include <asm/dma.h>
 #include <asm/hardware.h>
-#include <asm/irq.h>
 
 #include "ucb1x00.h"
 
@@ -507,14 +506,14 @@ static int ucb1x00_probe(struct mcp *mcp)
 		goto err_free;
 	}
 
-	ret = request_irq(ucb->irq, ucb1x00_irq, 0, "UCB1x00", ucb);
+	ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING,
+			  "UCB1x00", ucb);
 	if (ret) {
 		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
 			ucb->irq, ret);
 		goto err_free;
 	}
 
-	set_irq_type(ucb->irq, IRQT_RISING);
 	mcp_set_drvdata(mcp, ucb);
 
 	ret = class_device_register(&ucb->cdev);
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 28bf2e69eb5..7ec08127c9d 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -88,7 +88,6 @@ static const char version[] =
 #include <linux/skbuff.h>
 
 #include <asm/io.h>
-#include <asm/irq.h>
 
 #include "smc91x.h"
 
@@ -2007,12 +2006,10 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr)
 	}
 
 	/* Grab the IRQ */
-      	retval = request_irq(dev->irq, &smc_interrupt, 0, dev->name, dev);
+      	retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev);
       	if (retval)
       		goto err_out;
 
-	set_irq_type(dev->irq, SMC_IRQ_TRIGGER_TYPE);
-
 #ifdef SMC_USE_PXA_DMA
 	{
 		int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 5c2824be4ee..e0efd1964e7 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -90,7 +90,7 @@
 			__l--;						\
 		}							\
 	} while (0)
-#define set_irq_type(irq, type)
+#define SMC_IRQ_FLAGS		(0)
 
 #elif defined(CONFIG_SA1100_PLEB)
 /* We can only do 16-bit reads and writes in the static memory space. */
@@ -109,7 +109,7 @@
 #define SMC_outw(v, a, r)	writew(v, (a) + (r))
 #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
 
-#define set_irq_type(irq, type) do {} while (0)
+#define SMC_IRQ_FLAGS		(0)
 
 #elif defined(CONFIG_SA1100_ASSABET)
 
@@ -185,11 +185,11 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #include <asm/mach-types.h>
 #include <asm/arch/cpu.h>
 
-#define	SMC_IRQ_TRIGGER_TYPE (( \
+#define	SMC_IRQ_FLAGS (( \
 		   machine_is_omap_h2() \
 		|| machine_is_omap_h3() \
 		|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
-	) ? IRQT_FALLING : IRQT_RISING)
+	) ? SA_TRIGGER_FALLING : SA_TRIGGER_RISING)
 
 
 #elif	defined(CONFIG_SH_SH4202_MICRODEV)
@@ -209,7 +209,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_insw(a, r, p, l)	insw((a) + (r) - 0xa0000000, p, l)
 #define SMC_outsw(a, r, p, l)	outsw((a) + (r) - 0xa0000000, p, l)
 
-#define set_irq_type(irq, type)	do {} while(0)
+#define SMC_IRQ_FLAGS		(0)
 
 #elif	defined(CONFIG_ISA)
 
@@ -237,7 +237,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_insw(a, r, p, l)	insw(((u32)a) + (r), p, l)
 #define SMC_outsw(a, r, p, l)	outsw(((u32)a) + (r), p, l)
 
-#define set_irq_type(irq, type)	do {} while(0)
+#define SMC_IRQ_FLAGS		(0)
 
 #define RPC_LSA_DEFAULT		RPC_LED_TX_RX
 #define RPC_LSB_DEFAULT		RPC_LED_100_10
@@ -319,7 +319,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
 			au_writew(*_p++ , _a); \
 	} while(0)
 
-#define set_irq_type(irq, type) do {} while (0)
+#define SMC_IRQ_FLAGS		(0)
 
 #else
 
@@ -342,8 +342,8 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
 
 #endif
 
-#ifndef	SMC_IRQ_TRIGGER_TYPE
-#define	SMC_IRQ_TRIGGER_TYPE	IRQT_RISING
+#ifndef	SMC_IRQ_FLAGS
+#define	SMC_IRQ_FLAGS		SA_TRIGGER_RISING
 #endif
 
 #ifdef SMC_USE_PXA_DMA
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
index 59975ee43cf..7772432d3fd 100644
--- a/include/asm-arm/irq.h
+++ b/include/asm-arm/irq.h
@@ -25,10 +25,14 @@ extern void disable_irq_nosync(unsigned int);
 extern void disable_irq(unsigned int);
 extern void enable_irq(unsigned int);
 
-#define __IRQT_FALEDGE	(1 << 0)
-#define __IRQT_RISEDGE	(1 << 1)
-#define __IRQT_LOWLVL	(1 << 2)
-#define __IRQT_HIGHLVL	(1 << 3)
+/*
+ * These correspond with the SA_TRIGGER_* defines, and therefore the
+ * IRQRESOURCE_IRQ_* defines.
+ */
+#define __IRQT_RISEDGE	(1 << 0)
+#define __IRQT_FALEDGE	(1 << 1)
+#define __IRQT_HIGHLVL	(1 << 2)
+#define __IRQT_LOWLVL	(1 << 3)
 
 #define IRQT_NOEDGE	(0)
 #define IRQT_RISING	(__IRQT_RISEDGE)
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 5dd5f02c5c5..ea9eff16c4b 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -18,6 +18,19 @@
 #define SA_PROBE		SA_ONESHOT
 #define SA_SAMPLE_RANDOM	SA_RESTART
 #define SA_SHIRQ		0x04000000
+/*
+ * As above, these correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour.  When
+ * requesting an interrupt without specifying a SA_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define SA_TRIGGER_LOW		0x00000008
+#define SA_TRIGGER_HIGH		0x00000004
+#define SA_TRIGGER_FALLING	0x00000002
+#define SA_TRIGGER_RISING	0x00000001
+#define SA_TRIGGER_MASK	(SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
+				 SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
 
 /*
  * Real Time signals may be queued.