summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2009-08-25 08:52:00 +0000
committerDavid S. Miller <davem@davemloft.net>2009-08-30 22:35:11 -0700
commit9e39f7c5b311a306977c5471f9e2ce4c456aa038 (patch)
tree3d76af2016c6991ec0d3785eb0890959d73b7ae2
parent82c2d02356229c66daa6b6e51f8da559327b87b0 (diff)
s2io: Generate complete messages using single line DBG_PRINTs
Single line log messages should be emitted by a single call where possible. Converted multiple calls to DBG_PRINT to single call form. Removed "s2io:" preface from DBG_PRINTs. The DBG_PRINT macro now emits a log level and is surrounded by a do {...} while (0) All s2io log output is now prefaced with KBUILD_MODNAME ": " via pr_fmt. The DBG_PRINT macro should probably be converted to use the dev_<level> form eventually. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/s2io.c321
-rw-r--r--drivers/net/s2io.h5
2 files changed, 165 insertions, 161 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 1d13f60a9f5..3138df5773e 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -652,9 +652,9 @@ static int init_shared_mem(struct s2io_nic *nic)
size += tx_cfg->fifo_len;
}
if (size > MAX_AVAILABLE_TXDS) {
- DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
- DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n",
- size);
+ DBG_PRINT(ERR_DBG,
+ "Too many TxDs requested: %d, max supported: %d\n",
+ size, MAX_AVAILABLE_TXDS);
return -EINVAL;
}
@@ -667,10 +667,9 @@ static int init_shared_mem(struct s2io_nic *nic)
* Legal values are from 2 to 8192
*/
if (size < 2) {
- DBG_PRINT(ERR_DBG, "s2io: Invalid fifo len (%d)", size);
- DBG_PRINT(ERR_DBG, "for fifo %d\n", i);
- DBG_PRINT(ERR_DBG, "s2io: Legal values for fifo len"
- "are 2 to 8192\n");
+ DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "
+ "Valid lengths are 2 through 8192\n",
+ i, size);
return -EINVAL;
}
}
@@ -713,8 +712,8 @@ static int init_shared_mem(struct s2io_nic *nic)
tmp_v = pci_alloc_consistent(nic->pdev,
PAGE_SIZE, &tmp_p);
if (!tmp_v) {
- DBG_PRINT(INFO_DBG, "pci_alloc_consistent ");
- DBG_PRINT(INFO_DBG, "failed for TxDL\n");
+ DBG_PRINT(INFO_DBG,
+ "pci_alloc_consistent failed for TxDL\n");
return -ENOMEM;
}
/* If we got a zero DMA address(can happen on
@@ -725,17 +724,14 @@ static int init_shared_mem(struct s2io_nic *nic)
if (!tmp_p) {
mac_control->zerodma_virt_addr = tmp_v;
DBG_PRINT(INIT_DBG,
- "%s: Zero DMA address for TxDL. ",
- dev->name);
- DBG_PRINT(INIT_DBG,
- "Virtual address %p\n", tmp_v);
+ "%s: Zero DMA address for TxDL. "
+ "Virtual address %p\n",
+ dev->name, tmp_v);
tmp_v = pci_alloc_consistent(nic->pdev,
PAGE_SIZE, &tmp_p);
if (!tmp_v) {
DBG_PRINT(INFO_DBG,
- "pci_alloc_consistent ");
- DBG_PRINT(INFO_DBG,
- "failed for TxDL\n");
+ "pci_alloc_consistent failed for TxDL\n");
return -ENOMEM;
}
mem_allocated += PAGE_SIZE;
@@ -771,9 +767,9 @@ static int init_shared_mem(struct s2io_nic *nic)
struct ring_info *ring = &mac_control->rings[i];
if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) {
- DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
- DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ", i);
- DBG_PRINT(ERR_DBG, "RxDs per Block");
+ DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "
+ "multiple of RxDs per Block\n",
+ dev->name, i);
return FAILURE;
}
size += rx_cfg->num_rxd;
@@ -927,7 +923,7 @@ static int init_shared_mem(struct s2io_nic *nic)
tmp_v_addr = mac_control->stats_mem;
mac_control->stats_info = (struct stat_block *)tmp_v_addr;
memset(tmp_v_addr, 0, size);
- DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
+ DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", dev->name,
(unsigned long long)tmp_p_addr);
mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
return SUCCESS;
@@ -994,10 +990,9 @@ static void free_shared_mem(struct s2io_nic *nic)
mac_control->zerodma_virt_addr,
(dma_addr_t)0);
DBG_PRINT(INIT_DBG,
- "%s: Freeing TxDL with zero DMA addr. ",
- dev->name);
- DBG_PRINT(INIT_DBG, "Virtual address %p\n",
- mac_control->zerodma_virt_addr);
+ "%s: Freeing TxDL with zero DMA address. "
+ "Virtual address %p\n",
+ dev->name, mac_control->zerodma_virt_addr);
swstats->mem_freed += PAGE_SIZE;
}
kfree(fifo->list_info);
@@ -1120,6 +1115,7 @@ static int s2io_print_pci_mode(struct s2io_nic *nic)
register u64 val64 = 0;
int mode;
struct config_param *config = &nic->config;
+ const char *pcimode;
val64 = readq(&bar0->pci_mode);
mode = (u8)GET_PCI_MODE(val64);
@@ -1135,38 +1131,39 @@ static int s2io_print_pci_mode(struct s2io_nic *nic)
return mode;
}
- DBG_PRINT(ERR_DBG, "%s: Device is on %d bit ",
- nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64);
-
switch (mode) {
case PCI_MODE_PCI_33:
- DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
+ pcimode = "33MHz PCI bus";
break;
case PCI_MODE_PCI_66:
- DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
+ pcimode = "66MHz PCI bus";
break;
case PCI_MODE_PCIX_M1_66:
- DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
+ pcimode = "66MHz PCIX(M1) bus";
break;
case PCI_MODE_PCIX_M1_100:
- DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
+ pcimode = "100MHz PCIX(M1) bus";
break;
case PCI_MODE_PCIX_M1_133:
- DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
+ pcimode = "133MHz PCIX(M1) bus";
break;
case PCI_MODE_PCIX_M2_66:
- DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
+ pcimode = "133MHz PCIX(M2) bus";
break;
case PCI_MODE_PCIX_M2_100:
- DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
+ pcimode = "200MHz PCIX(M2) bus";
break;
case PCI_MODE_PCIX_M2_133:
- DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
+ pcimode = "266MHz PCIX(M2) bus";
break;
default:
- return -1; /* Unsupported bus speed */
+ pcimode = "unsupported bus!";
+ mode = -1;
}
+ DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",
+ nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode);
+
return mode;
}
@@ -1704,9 +1701,9 @@ static int init_nic(struct s2io_nic *nic)
/* Disable differentiated services steering logic */
for (i = 0; i < 64; i++) {
if (rts_ds_steer(nic, i, 0) == FAILURE) {
- DBG_PRINT(ERR_DBG, "%s: failed rts ds steering",
- dev->name);
- DBG_PRINT(ERR_DBG, "set on codepoint %d\n", i);
+ DBG_PRINT(ERR_DBG,
+ "%s: rts_ds_steer failed on codepoint %d\n",
+ dev->name, i);
return -ENODEV;
}
}
@@ -1783,7 +1780,7 @@ static int init_nic(struct s2io_nic *nic)
break;
if (time > 10) {
- DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
+ DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",
dev->name);
return -ENODEV;
}
@@ -2189,35 +2186,35 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
mode = s2io_verify_pci_mode(sp);
if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
+ DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
+ DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
+ DBG_PRINT(ERR_DBG, "PFC is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
- DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
+ DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
- DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
+ DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
+ DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
- DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
+ DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");
return 0;
}
if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
- DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
+ DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");
return 0;
}
@@ -2229,12 +2226,12 @@ static int verify_xena_quiescence(struct s2io_nic *sp)
if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
sp->device_type == XFRAME_II_DEVICE &&
mode != PCI_MODE_PCI_33) {
- DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
+ DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");
return 0;
}
if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
- DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
+ DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");
return 0;
}
return 1;
@@ -2339,9 +2336,9 @@ static int start_nic(struct s2io_nic *nic)
*/
val64 = readq(&bar0->adapter_status);
if (!verify_xena_quiescence(nic)) {
- DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
- DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
- (unsigned long long)val64);
+ DBG_PRINT(ERR_DBG, "%s: device is not ready, "
+ "Adapter status reads: 0x%llx\n",
+ dev->name, (unsigned long long)val64);
return FAILURE;
}
@@ -2455,7 +2452,7 @@ static void free_tx_buffers(struct s2io_nic *nic)
}
}
DBG_PRINT(INTR_DBG,
- "%s:forcibly freeing %d skbs on FIFO%d\n",
+ "%s: forcibly freeing %d skbs on FIFO%d\n",
dev->name, cnt, i);
fifo->tx_curr_get_info.offset = 0;
fifo->tx_curr_put_info.offset = 0;
@@ -2547,8 +2544,8 @@ static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
if ((block_no == block_no1) &&
(off == ring->rx_curr_get_info.offset) &&
(rxdp->Host_Control)) {
- DBG_PRINT(INTR_DBG, "%s: Get and Put", ring->dev->name);
- DBG_PRINT(INTR_DBG, " info equated\n");
+ DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n",
+ ring->dev->name);
goto end;
}
if (off && (off == ring->rxd_count)) {
@@ -2583,8 +2580,8 @@ static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
/* allocate skb */
skb = dev_alloc_skb(size);
if (!skb) {
- DBG_PRINT(INFO_DBG, "%s: Out of ", ring->dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
+ DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n",
+ ring->dev->name);
if (first_rxdp) {
wmb();
first_rxdp->Control_1 |= RXD_OWN_XENA;
@@ -2806,7 +2803,7 @@ static void free_rx_buffers(struct s2io_nic *sp)
ring->rx_curr_put_info.offset = 0;
ring->rx_curr_get_info.offset = 0;
ring->rx_bufs_left = 0;
- DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
+ DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n",
dev->name, buf_cnt, i);
}
}
@@ -2814,8 +2811,8 @@ static void free_rx_buffers(struct s2io_nic *sp)
static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
{
if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+ DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n",
+ ring->dev->name);
}
return 0;
}
@@ -2938,8 +2935,9 @@ static void s2io_netpoll(struct net_device *dev)
struct ring_info *ring = &mac_control->rings[i];
if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
+ DBG_PRINT(INFO_DBG,
+ "%s: Out of memory in Rx Netpoll!!\n",
+ dev->name);
break;
}
}
@@ -2991,9 +2989,8 @@ static int rx_intr_handler(struct ring_info *ring_data, int budget)
}
skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
+ DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",
ring_data->dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
return 0;
}
if (ring_data->rxd_mode == RXD_MODE_1) {
@@ -3126,8 +3123,8 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
if (skb == NULL) {
spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
- DBG_PRINT(ERR_DBG, "%s: Null skb ", __func__);
- DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
+ DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",
+ __func__);
return;
}
pkt_cnt++;
@@ -3266,22 +3263,22 @@ static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index,
if (val64 == 3) {
switch (type) {
case 1:
- DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
- "service. Excessive temperatures may "
- "result in premature transceiver "
- "failure \n");
+ DBG_PRINT(ERR_DBG,
+ "Take Xframe NIC out of service.\n");
+ DBG_PRINT(ERR_DBG,
+"Excessive temperatures may result in premature transceiver failure.\n");
break;
case 2:
- DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
- "service Excessive bias currents may "
- "indicate imminent laser diode "
- "failure \n");
+ DBG_PRINT(ERR_DBG,
+ "Take Xframe NIC out of service.\n");
+ DBG_PRINT(ERR_DBG,
+"Excessive bias currents may indicate imminent laser diode failure.\n");
break;
case 3:
- DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
- "service Excessive laser output "
- "power may saturate far-end "
- "receiver\n");
+ DBG_PRINT(ERR_DBG,
+ "Take Xframe NIC out of service.\n");
+ DBG_PRINT(ERR_DBG,
+"Excessive laser output power may saturate far-end receiver.\n");
break;
default:
DBG_PRINT(ERR_DBG,
@@ -3321,15 +3318,16 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
val64 = 0x0;
val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
if ((val64 == 0xFFFF) || (val64 == 0x0000)) {
- DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
- "Returned %llx\n", (unsigned long long)val64);
+ DBG_PRINT(ERR_DBG,
+ "ERR: MDIO slave access failed - Returned %llx\n",
+ (unsigned long long)val64);
return;
}
/* Check for the expected value of control reg 1 */
if (val64 != MDIO_CTRL1_SPEED10G) {
- DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
- DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n",
+ DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "
+ "Returned: %llx- Expected: 0x%x\n",
(unsigned long long)val64, MDIO_CTRL1_SPEED10G);
return;
}
@@ -3481,7 +3479,7 @@ static void s2io_reset(struct s2io_nic *sp)
struct stat_block *stats;
struct swStat *swstats;
- DBG_PRINT(INIT_DBG, "%s - Resetting XFrame card %s\n",
+ DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
__func__, sp->dev->name);
/* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
@@ -3618,10 +3616,9 @@ static int s2io_set_swapper(struct s2io_nic *sp)
i++;
}
if (i == 4) {
- DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
- dev->name);
- DBG_PRINT(ERR_DBG, "feedback read %llx\n",
- (unsigned long long)val64);
+ DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "
+ "feedback read %llx\n",
+ dev->name, (unsigned long long)val64);
return FAILURE;
}
valr = value[i];
@@ -3650,8 +3647,8 @@ static int s2io_set_swapper(struct s2io_nic *sp)
}
if (i == 4) {
unsigned long long x = val64;
- DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
- DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
+ DBG_PRINT(ERR_DBG,
+ "Write failed, Xmsi_addr reads:0x%llx\n", x);
return FAILURE;
}
}
@@ -3711,10 +3708,9 @@ static int s2io_set_swapper(struct s2io_nic *sp)
val64 = readq(&bar0->pif_rd_swapper_fb);
if (val64 != 0x0123456789ABCDEFULL) {
/* Endian settings are incorrect, calls for another dekko. */
- DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
- dev->name);
- DBG_PRINT(ERR_DBG, "feedback read %llx\n",
- (unsigned long long)val64);
+ DBG_PRINT(ERR_DBG,
+ "%s: Endian settings are wrong, feedback read %llx\n",
+ dev->name, (unsigned long long)val64);
return FAILURE;
}
@@ -3758,7 +3754,8 @@ static void restore_xmsi_data(struct s2io_nic *nic)
val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, msix_index)) {
- DBG_PRINT(ERR_DBG, "failed in %s\n", __func__);
+ DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
+ __func__, msix_index);
continue;
}
}
@@ -3779,7 +3776,8 @@ static void store_xmsi_data(struct s2io_nic *nic)
val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, msix_index)) {
- DBG_PRINT(ERR_DBG, "failed in %s\n", __func__);
+ DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
+ __func__, msix_index);
continue;
}
addr = readq(&bar0->xmsi_address);
@@ -3851,7 +3849,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
if (ret) {
- DBG_PRINT(ERR_DBG, "s2io: Enabling MSI-X failed\n");
+ DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
kfree(nic->entries);
swstats->mem_freed += nic->num_entries *
sizeof(struct msix_entry);
@@ -3915,8 +3913,8 @@ static int s2io_test_msi(struct s2io_nic *sp)
if (!sp->msi_detected) {
/* MSI(X) test failed, go back to INTx mode */
DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
- "using MSI(X) during test\n", sp->dev->name,
- pci_name(pdev));
+ "using MSI(X) during test\n",
+ sp->dev->name, pci_name(pdev));
err = -EOPNOTSUPP;
}
@@ -4095,7 +4093,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
if (unlikely(skb->len <= 0)) {
- DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+ DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name);
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -5052,18 +5050,17 @@ static void s2io_set_multicast(struct net_device *dev)
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 0;
- DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
- dev->name);
+ DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name);
}
/* Update individual M_CAST address list */
if ((!sp->m_cast_flg) && dev->mc_count) {
if (dev->mc_count >
(config->max_mc_addr - config->max_mac_addr)) {
- DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
+ DBG_PRINT(ERR_DBG,
+ "%s: No more Rx filters can be added - "
+ "please enable ALL_MULTI instead\n",
dev->name);
- DBG_PRINT(ERR_DBG, "can be added, please enable ");
- DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
return;
}
@@ -5086,8 +5083,9 @@ static void s2io_set_multicast(struct net_device *dev)
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
S2IO_BIT_RESET)) {
- DBG_PRINT(ERR_DBG, "%s: Adding ", dev->name);
- DBG_PRINT(ERR_DBG, "Multicasts failed\n");
+ DBG_PRINT(ERR_DBG,
+ "%s: Adding Multicasts failed\n",
+ dev->name);
return;
}
}
@@ -5117,8 +5115,9 @@ static void s2io_set_multicast(struct net_device *dev)
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
S2IO_BIT_RESET)) {
- DBG_PRINT(ERR_DBG, "%s: Adding ", dev->name);
- DBG_PRINT(ERR_DBG, "Multicasts failed\n");
+ DBG_PRINT(ERR_DBG,
+ "%s: Adding Multicasts failed\n",
+ dev->name);
return;
}
}
@@ -5552,7 +5551,7 @@ static void s2io_ethtool_gringparam(struct net_device *dev,
for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
tx_desc_count += sp->config.tx_cfg[i].fifo_len;
- DBG_PRINT(INFO_DBG, "\nmax txds : %d\n", sp->config.max_txds);
+ DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
ering->tx_pending = tx_desc_count;
rx_desc_count = 0;
for (i = 0 ; i < sp->config.rx_ring_num ; i++)
@@ -5886,8 +5885,10 @@ static int s2io_ethtool_seeprom(struct net_device *dev,
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
DBG_PRINT(ERR_DBG,
- "ETHTOOL_WRITE_EEPROM Err: Magic value ");
- DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n", eeprom->magic);
+ "ETHTOOL_WRITE_EEPROM Err: "
+ "Magic value is wrong, it is 0x%x should be 0x%x\n",
+ (sp->pdev->vendor | (sp->pdev->device << 16)),
+ eeprom->magic);
return -EFAULT;
}
@@ -5900,9 +5901,8 @@ static int s2io_ethtool_seeprom(struct net_device *dev,
if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
DBG_PRINT(ERR_DBG,
- "ETHTOOL_WRITE_EEPROM Err: Cannot ");
- DBG_PRINT(ERR_DBG,
- "write into the specified offset\n");
+ "ETHTOOL_WRITE_EEPROM Err: "
+ "Cannot write into the specified offset\n");
return -EFAULT;
}
cnt++;
@@ -5934,13 +5934,13 @@ static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
val64 = readq(&bar0->pif_rd_swapper_fb);
if (val64 != 0x123456789abcdefULL) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1);
}
val64 = readq(&bar0->rmac_pause_cfg);
if (val64 != 0xc000ffff00000000ULL) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2);
}
val64 = readq(&bar0->rx_queue_cfg);
@@ -5950,13 +5950,13 @@ static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
exp_val = 0x0808080808080808ULL;
if (val64 != exp_val) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3);
}
val64 = readq(&bar0->xgxs_efifo_cfg);
if (val64 != 0x000000001923141EULL) {
fail = 1;
- DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
+ DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4);
}
val64 = 0x5A5A5A5A5A5A5A5AULL;
@@ -5964,7 +5964,7 @@ static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
val64 = readq(&bar0->xmsi_data);
if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
fail = 1;
- DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
+ DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);
}
val64 = 0xA5A5A5A5A5A5A5A5ULL;
@@ -5972,7 +5972,7 @@ static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
val64 = readq(&bar0->xmsi_data);
if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
fail = 1;
- DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
+ DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);
}
*data = fail;
@@ -6825,8 +6825,9 @@ static void s2io_set_link(struct work_struct *work)
}
nic->device_enabled_once = true;
} else {
- DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
- DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
+ DBG_PRINT(ERR_DBG,
+ "%s: Error: device is not Quiescent\n",
+ dev->name);
s2io_stop_all_tx_queue(nic);
}
}
@@ -6876,9 +6877,9 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate ");
- DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
+ DBG_PRINT(INFO_DBG,
+ "%s: Out of memory to allocate %s\n",
+ dev->name, "1 buf mode SKBs");
stats->mem_alloc_fail_cnt++;
return -ENOMEM ;
}
@@ -6905,9 +6906,10 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate ");
- DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
+ DBG_PRINT(INFO_DBG,
+ "%s: Out of memory to allocate %s\n",
+ dev->name,
+ "2 buf mode SKBs");
stats->mem_alloc_fail_cnt++;
return -ENOMEM;
}
@@ -7095,8 +7097,8 @@ static int s2io_add_isr(struct s2io_nic *sp)
}
if (!err) {
pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt);
- DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
- " through alarm vector\n");
+ DBG_PRINT(INFO_DBG,
+ "MSI-X-TX entries enabled through alarm vector\n");
}
}
if (sp->config.intr_type == INTA) {
@@ -7176,8 +7178,8 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
msleep(50);
cnt++;
if (cnt == 10) {
- DBG_PRINT(ERR_DBG, "s2io_close:Device not Quiescent ");
- DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
+ DBG_PRINT(ERR_DBG, "Device not Quiescent - "
+ "adapter status reads 0x%llx\n",
(unsigned long long)val64);
break;
}
@@ -7628,7 +7630,7 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
u8 *dev_multiq)
{
if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) {
- DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos "
+ DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
"(%d) not supported\n", tx_fifo_num);
if (tx_fifo_num < 1)
@@ -7636,8 +7638,7 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
else
tx_fifo_num = MAX_TX_FIFOS;
- DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num);
- DBG_PRINT(ERR_DBG, "tx fifos\n");
+ DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);
}
if (multiq)
@@ -7646,7 +7647,7 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
if (tx_steering_type && (1 == tx_fifo_num)) {
if (tx_steering_type != TX_DEFAULT_STEERING)
DBG_PRINT(ERR_DBG,
- "s2io: Tx steering is not supported with "
+ "Tx steering is not supported with "
"one fifo. Disabling Tx steering.\n");
tx_steering_type = NO_STEERING;
}
@@ -7654,21 +7655,21 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
if ((tx_steering_type < NO_STEERING) ||
(tx_steering_type > TX_DEFAULT_STEERING)) {
DBG_PRINT(ERR_DBG,
- "s2io: Requested transmit steering not supported\n");
- DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n");
+ "Requested transmit steering not supported\n");
+ DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");
tx_steering_type = NO_STEERING;
}
if (rx_ring_num > MAX_RX_RINGS) {
DBG_PRINT(ERR_DBG,
- "s2io: Requested number of rx rings not supported\n");
- DBG_PRINT(ERR_DBG, "s2io: Default to %d rx rings\n",
+ "Requested number of rx rings not supported\n");
+ DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",
MAX_RX_RINGS);
rx_ring_num = MAX_RX_RINGS;
}
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
- DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
+ DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "
"Defaulting to INTA\n");
*dev_intr_type = INTA;
}
@@ -7676,14 +7677,14 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
if ((*dev_intr_type == MSI_X) &&
((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
(pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
- DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
+ DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "
"Defaulting to INTA\n");
*dev_intr_type = INTA;
}
if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
- DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
- DBG_PRINT(ERR_DBG, "s2io: Defaulting to 1-buffer mode\n");
+ DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");
+ DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
rx_ring_mode = 1;
}
return SUCCESS;
@@ -7776,12 +7777,12 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
ret = pci_enable_device(pdev);
if (ret) {
DBG_PRINT(ERR_DBG,
- "s2io_init_nic: pci_enable_device failed\n");
+ "%s: pci_enable_device failed\n", __func__);
return ret;
}
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
+ DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__);
dma_flag = true;
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
DBG_PRINT(ERR_DBG,
@@ -7791,14 +7792,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
return -ENOMEM;
}
} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
+ DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__);
} else {
pci_disable_device(pdev);
return -ENOMEM;
}
ret = pci_request_regions(pdev, s2io_driver_name);
if (ret) {
- DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x \n",
+ DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",
__func__, ret);
pci_disable_device(pdev);
return -ENODEV;
@@ -7992,7 +7993,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
/* Setting swapper control on the NIC, for proper reset operation */
if (s2io_set_swapper(sp)) {
- DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
+ DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",
dev->name);
ret = -EAGAIN;
goto set_swap_failed;
@@ -8002,8 +8003,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
if (sp->device_type & XFRAME_II_DEVICE) {
mode = s2io_verify_pci_mode(sp);
if (mode < 0) {
- DBG_PRINT(ERR_DBG, "%s: ", __func__);
- DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
+ DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",
+ __func__);
ret = -EBADSLT;
goto set_swap_failed;
}
@@ -8021,7 +8022,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
if (ret) {
DBG_PRINT(ERR_DBG,
- "s2io: MSI-X requested but failed to enable\n");
+ "MSI-X requested but failed to enable\n");
sp->config.intr_type = INTA;
}
}
@@ -8137,12 +8138,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
sp->product_name, pdev->revision);
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
s2io_driver_version);
- DBG_PRINT(ERR_DBG, "%s: MAC ADDR: %pM\n", dev->name, dev->dev_addr);
- DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
+ DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);
+ DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);
if (sp->device_type & XFRAME_II_DEVICE) {
mode = s2io_print_pci_mode(sp);
if (mode < 0) {
- DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
ret = -EBADSLT;
unregister_netdev(dev);
goto set_swap_failed;
@@ -8532,8 +8532,9 @@ static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
*lro = l_lro;
if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
- DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
- "0x%x, actual 0x%x\n", __func__,
+ DBG_PRINT(INFO_DBG, "%s: Out of sequence. "
+ "expected 0x%x, actual 0x%x\n",
+ __func__,
(*lro)->tcp_next_seq,
ntohl(tcph->seq));
@@ -8571,7 +8572,7 @@ static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
}
if (ret == 0) { /* sessions exceeded */
- DBG_PRINT(INFO_DBG, "%s:All LRO sessions already in use\n",
+ DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n",
__func__);
*lro = NULL;
return ret;
@@ -8593,7 +8594,7 @@ static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
}
break;
default:
- DBG_PRINT(ERR_DBG, "%s:Dont know, can't say!!\n", __func__);
+ DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);
break;
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index d5c5be6c07b..47c36e0994f 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -64,7 +64,10 @@ enum {
static int debug_level = ERR_DBG;
/* DEBUG message print. */
-#define DBG_PRINT(dbg_level, args...) if(!(debug_level<dbg_level)) printk(args)
+#define DBG_PRINT(dbg_level, fmt, args...) do { \
+ if (dbg_level >= debug_level) \
+ pr_info(fmt, ##args); \
+ } while (0)
/* Protocol assist features of the NIC */
#define L3_CKSUM_OK 0xFFFF