[PATCH] Remove file riowinif.h from rio driver (unused file)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 1329 deletions

diff --git a/drivers/char/rio/riowinif.h b/drivers/char/rio/riowinif.h
deleted file mode 100644
index f802d7593b8..00000000000
--- a/drivers/char/rio/riowinif.h
+++ /dev/null
@@ -1,1329 +0,0 @@
-/************************************************************************/
-/*									*/
-/*	Title		:	RIO Shared Memory Window Inteface	*/
-/*									*/
-/*	Author		:	N.P.Vassallo				*/
-/*									*/
-/*	Creation	:	7th June 1999				*/
-/*									*/
-/*	Version		:	1.0.0					*/
-/*									*/
-/*	Copyright	:	(c) Specialix International Ltd. 1999	*
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *									*/
-/*	Description	:	Prototypes, structures and definitions	*/
-/*				describing RIO host card shared	memory	*/
-/*				window interface structures:		*/
-/*					PARMMAP				*/
-/*					RUP				*/
-/*					PHB				*/
-/*					LPB				*/
-/*					PKT				*/
-/*									*/
-/************************************************************************/
-
-/* History...
-
-1.0.0	07/06/99 NPV	Creation. (based on PARMMAP.H)
-
-*/
-
-#ifndef	_riowinif_h		/* If RIOWINDIF.H not already defined */
-#define	_riowinif_h    1
-
-/*****************************************************************************
-********************************             *********************************
-********************************   General   *********************************
-********************************             *********************************
-*****************************************************************************/
-
-#define	TPNULL		((_u16)(0x8000))
-
-/*****************************************************************************
-********************************              ********************************
-********************************   PARM_MAP   ********************************
-********************************              ********************************
-*****************************************************************************/
-
-/* The PARM_MAP structure defines global values relating to the Host Card / RTA
-   and is the main structure from which all other structures are referenced. */
-
-typedef struct _PARM_MAP {
-	_u16 phb_ptr;		/* 0x00 Pointer to the PHB array */
-	_u16 phb_num_ptr;	/* 0x02 Ptr to Number of PHB's */
-	_u16 free_list;		/* 0x04 Free List pointer */
-	_u16 free_list_end;	/* 0x06 Free List End pointer */
-	_u16 q_free_list_ptr;	/* 0x08 Ptr to Q_BUF variable */
-	_u16 unit_id_ptr;	/* 0x0A Unit Id */
-	_u16 link_str_ptr;	/* 0x0C Link Structure Array */
-	_u16 bootloader_1;	/* 0x0E 1st Stage Boot Loader */
-	_u16 bootloader_2;	/* 0x10 2nd Stage Boot Loader */
-	_u16 port_route_map_ptr;	/* 0x12 Port Route Map */
-	_u16 route_ptr;		/* 0x14 Route Map */
-	_u16 map_present;	/* 0x16 Route Map present */
-	_u16 pkt_num;		/* 0x18 Total number of packets */
-	_u16 q_num;		/* 0x1A Total number of Q packets */
-	_u16 buffers_per_port;	/* 0x1C Number of buffers per port */
-	_u16 heap_size;		/* 0x1E Initial size of heap */
-	_u16 heap_left;		/* 0x20 Current Heap left */
-	_u16 error;		/* 0x22 Error code */
-	_u16 tx_max;		/* 0x24 Max number of tx pkts per phb */
-	_u16 rx_max;		/* 0x26 Max number of rx pkts per phb */
-	_u16 rx_limit;		/* 0x28 For high / low watermarks */
-	_u16 links;		/* 0x2A Links to use */
-	_u16 timer;		/* 0x2C Interrupts per second */
-	_u16 rups;		/* 0x2E Pointer to the RUPs */
-	_u16 max_phb;		/* 0x30 Mostly for debugging */
-	_u16 living;		/* 0x32 Just increments!! */
-	_u16 init_done;		/* 0x34 Initialisation over */
-	_u16 booting_link;	/* 0x36 */
-	_u16 idle_count;	/* 0x38 Idle time counter */
-	_u16 busy_count;	/* 0x3A Busy counter */
-	_u16 idle_control;	/* 0x3C Control Idle Process */
-	_u16 tx_intr;		/* 0x3E TX interrupt pending */
-	_u16 rx_intr;		/* 0x40 RX interrupt pending */
-	_u16 rup_intr;		/* 0x42 RUP interrupt pending */
-
-} PARM_MAP;
-
-/* Same thing again, but defined as offsets... */
-
-#define	PM_phb_ptr		0x00	/* 0x00 Pointer to the PHB array */
-#define	PM_phb_num_ptr		0x02	/* 0x02 Ptr to Number of PHB's */
-#define	PM_free_list		0x04	/* 0x04 Free List pointer */
-#define	PM_free_list_end	0x06	/* 0x06 Free List End pointer */
-#define	PM_q_free_list_ptr	0x08	/* 0x08 Ptr to Q_BUF variable */
-#define	PM_unit_id_ptr		0x0A	/* 0x0A Unit Id */
-#define	PM_link_str_ptr		0x0C	/* 0x0C Link Structure Array */
-#define	PM_bootloader_1		0x0E	/* 0x0E 1st Stage Boot Loader */
-#define	PM_bootloader_2		0x10	/* 0x10 2nd Stage Boot Loader */
-#define	PM_port_route_map_ptr	0x12	/* 0x12 Port Route Map */
-#define	PM_route_ptr		0x14	/* 0x14 Route Map */
-#define	PM_map_present		0x16	/* 0x16 Route Map present */
-#define	PM_pkt_num		0x18	/* 0x18 Total number of packets */
-#define	PM_q_num		0x1A	/* 0x1A Total number of Q packets */
-#define	PM_buffers_per_port	0x1C	/* 0x1C Number of buffers per port */
-#define	PM_heap_size		0x1E	/* 0x1E Initial size of heap */
-#define	PM_heap_left		0x20	/* 0x20 Current Heap left */
-#define	PM_error		0x22	/* 0x22 Error code */
-#define	PM_tx_max		0x24	/* 0x24 Max number of tx pkts per phb */
-#define	PM_rx_max		0x26	/* 0x26 Max number of rx pkts per phb */
-#define	PM_rx_limit		0x28	/* 0x28 For high / low watermarks */
-#define	PM_links		0x2A	/* 0x2A Links to use */
-#define	PM_timer		0x2C	/* 0x2C Interrupts per second */
-#define	PM_rups			0x2E	/* 0x2E Pointer to the RUPs */
-#define	PM_max_phb		0x30	/* 0x30 Mostly for debugging */
-#define	PM_living		0x32	/* 0x32 Just increments!! */
-#define	PM_init_done		0x34	/* 0x34 Initialisation over */
-#define	PM_booting_link		0x36	/* 0x36 */
-#define	PM_idle_count		0x38	/* 0x38 Idle time counter */
-#define	PM_busy_count		0x3A	/* 0x3A Busy counter */
-#define	PM_idle_control		0x3C	/* 0x3C Control Idle Process */
-#define	PM_tx_intr		0x3E	/* 0x4E TX interrupt pending */
-#define	PM_rx_intr		0x40	/* 0x40 RX interrupt pending */
-#define	PM_rup_intr		0x42	/* 0x42 RUP interrupt pending */
-#define	sizeof_PARM_MAP		0x44	/* structure size = 0x44 */
-
-/* PARM_MAP.error definitions... */
-#define	E_NO_ERROR		0x00
-#define	E_PROCESS_NOT_INIT	0x01
-#define	E_LINK_TIMEOUT		0x02
-#define	E_NO_ROUTE		0x03
-#define	E_CONFUSED		0x04
-#define	E_HOME			0x05
-#define	E_CSUM_FAIL		0x06
-#define	E_DISCONNECTED		0x07
-#define	E_BAD_RUP		0x08
-#define	E_NO_VIRGIN		0x09
-#define	E_BOOT_RUP_BUSY		0x10
-#define	E_CHANALLOC		0x80
-#define	E_POLL_ALLOC		0x81
-#define	E_LTTWAKE		0x82
-#define	E_LTT_ALLOC		0x83
-#define	E_LRT_ALLOC		0x84
-#define	E_CIRRUS		0x85
-#define	E_MONITOR		0x86
-#define	E_PHB_ALLOC		0x87
-#define	E_ARRAY_ALLOC		0x88
-#define	E_QBUF_ALLOC		0x89
-#define	E_PKT_ALLOC		0x8a
-#define	E_GET_TX_Q_BUF		0x8b
-#define	E_GET_RX_Q_BUF		0x8c
-#define	E_MEM_OUT		0x8d
-#define	E_MMU_INIT		0x8e
-#define	E_LTT_INIT		0x8f
-#define	E_LRT_INIT		0x90
-#define	E_LINK_RUN		0x91
-#define	E_MONITOR_ALLOC		0x92
-#define	E_MONITOR_INIT		0x93
-#define	E_POLL_INIT		0x94
-
-/* PARM_MAP.links definitions... */
-#define	RIO_LINK_ENABLE	0x80FF
-
-/*****************************************************************************
-**********************************         ***********************************
-**********************************   RUP   ***********************************
-**********************************         ***********************************
-*****************************************************************************/
-
-/* The RUP (Remote Unit Port) structure relates to the Remote Terminal Adapters
-   attached to the system and there is normally an array of MAX_RUPS (=16) structures
-   in a host card, defined by PARM_MAP->rup. */
-
-typedef struct _RUP {
-	_u16 txpkt;		/* 0x00 Outgoing packet */
-	_u16 rxpkt;		/* 0x02 ncoming packet */
-	_u16 link;		/* 0x04 Which link to send packet down ? */
-	_u8 rup_dest_unit[2];	/* 0x06 Destination Unit */
-	_u16 handshake;		/* 0x08 Handshaking */
-	_u16 timeout;		/* 0x0A Timeout */
-	_u16 status;		/* 0x0C Status */
-	_u16 txcontrol;		/* 0x0E Transmit control */
-	_u16 rxcontrol;		/* 0x10 Receive control */
-
-} RUP;
-
-/* Same thing again, but defined as offsets... */
-
-#define	RUP_txpkt		0x00	/* 0x00 Outgoing packet */
-#define	RUP_rxpkt		0x02	/* 0x02 Incoming packet */
-#define	RUP_link		0x04	/* 0x04 Which link to send packet down ? */
-#define	RUP_rup_dest_unit	0x06	/* 0x06 Destination Unit */
-#define	RUP_handshake		0x08	/* 0x08 Handshaking */
-#define	RUP_timeout		0x0A	/* 0x0A Timeout */
-#define	RUP_status		0x0C	/* 0x0C Status */
-#define	RUP_txcontrol		0x0E	/* 0x0E Transmit control */
-#define	RUP_rxcontrol		0x10	/* 0x10 Receive control */
-#define	sizeof_RUP		0x12	/* structure size = 0x12 */
-
-#define MAX_RUP			16
-
-/* RUP.txcontrol definitions... */
-#define	TX_RUP_INACTIVE		0	/* Nothing to transmit */
-#define	TX_PACKET_READY		1	/* Transmit packet ready */
-#define	TX_LOCK_RUP		2	/* Transmit side locked */
-
-/* RUP.txcontrol definitions... */
-#define	RX_RUP_INACTIVE		0	/* Nothing received */
-#define	RX_PACKET_READY		1	/* Packet received */
-
-#define	RUP_NO_OWNER		0xFF	/* RUP not owned by any process */
-
-/*****************************************************************************
-**********************************         ***********************************
-**********************************   PHB   ***********************************
-**********************************         ***********************************
-*****************************************************************************/
-
-/* The PHB (Port Header Block) structure relates to the serial ports attached
-   to the system and there is normally an array of MAX_PHBS (=128) structures
-   in a host card, defined by PARM_MAP->phb_ptr and PARM_MAP->phb_num_ptr. */
-
-typedef struct _PHB {
-	_u16 source;		/* 0x00 Location of the PHB in the host card */
-	_u16 handshake;		/* 0x02 Used to manage receive packet flow control */
-	_u16 status;		/* 0x04 Internal port transmit/receive status */
-	_u16 timeout;		/* 0x06 Time period to wait for an ACK */
-	_u16 link;		/* 0x08 The host link associated with the PHB */
-	_u16 destination;	/* 0x0A Location of the remote port on the network */
-
-	_u16 tx_start;		/* 0x0C first entry in the packet array for transmit packets */
-	_u16 tx_end;		/* 0x0E last entry in the packet array for transmit packets */
-	_u16 tx_add;		/* 0x10 position in the packet array for new transmit packets */
-	_u16 tx_remove;		/* 0x12 current position in the packet pointer array */
-
-	_u16 rx_start;		/* 0x14 first entry in the packet array for receive packets */
-	_u16 rx_end;		/* 0x16 last entry in the packet array for receive packets */
-	_u16 rx_add;		/* 0x18 position in the packet array for new receive packets */
-	_u16 rx_remove;		/* 0x1A current position in the packet pointer array */
-
-} PHB;
-
-/* Same thing again, but defined as offsets... */
-
-#define	PHB_source		0x00	/* 0x00 Location of the PHB in the host card */
-#define	PHB_handshake		0x02	/* 0x02 Used to manage receive packet flow control */
-#define	PHB_status		0x04	/* 0x04 Internal port transmit/receive status */
-#define	PHB_timeout		0x06	/* 0x06 Time period to wait for an ACK */
-#define	PHB_link		0x08	/* 0x08 The host link associated with the PHB */
-#define	PHB_destination		0x0A	/* 0x0A Location of the remote port on the network */
-#define	PHB_tx_start		0x0C	/* 0x0C first entry in the packet array for transmit packets */
-#define	PHB_tx_end		0x0E	/* 0x0E last entry in the packet array for transmit packets */
-#define	PHB_tx_add		0x10	/* 0x10 position in the packet array for new transmit packets */
-#define	PHB_tx_remove		0x12	/* 0x12 current position in the packet pointer array */
-#define	PHB_rx_start		0x14	/* 0x14 first entry in the packet array for receive packets */
-#define	PHB_rx_end		0x16	/* 0x16 last entry in the packet array for receive packets */
-#define	PHB_rx_add		0x18	/* 0x18 position in the packet array for new receive packets */
-#define	PHB_rx_remove		0x1A	/* 0x1A current position in the packet pointer array */
-#define	sizeof_PHB		0x1C	/* structure size = 0x1C */
-
-/* PHB.handshake definitions... */
-#define	PHB_HANDSHAKE_SET	0x0001	/* Set by LRT */
-#define	PHB_HANDSHAKE_RESET	0x0002	/* Set by ISR / driver */
-#define	PHB_HANDSHAKE_FLAGS	(PHB_HANDSHAKE_RESET|PHB_HANDSHAKE_SET)
-						/* Reset by ltt */
-
-#define	MAX_PHB			128	/* range 0-127 */
-
-/*****************************************************************************
-**********************************         ***********************************
-**********************************   LPB   ***********************************
-**********************************         ***********************************
-*****************************************************************************/
-
-/* The LPB (Link Parameter Block) structure relates to a RIO Network Link
-   and there is normally an array of MAX_LINKS (=4) structures in a host card,
-   defined by PARM_MAP->link_str_ptr. */
-
-typedef struct _LPB {
-	_u16 link_number;	/* 0x00 Link Number */
-	_u16 in_ch;		/* 0x02 Link In Channel */
-	_u16 out_ch;		/* 0x04 Link Out Channel */
-	_u8 attached_serial[4];	/* 0x06 Attached serial number */
-	_u8 attached_host_serial[4];	/* 0x0A Serial number of Host who booted other end */
-	_u16 descheduled;	/* 0x0E Currently Descheduled */
-	_u16 state;		/* 0x10 Current state */
-	_u16 send_poll;		/* 0x12 Send a Poll Packet */
-	_u16 ltt_p;		/* 0x14 Process Descriptor */
-	_u16 lrt_p;		/* 0x16 Process Descriptor */
-	_u16 lrt_status;	/* 0x18 Current lrt status */
-	_u16 ltt_status;	/* 0x1A Current ltt status */
-	_u16 timeout;		/* 0x1C Timeout value */
-	_u16 topology;		/* 0x1E Topology bits */
-	_u16 mon_ltt;		/* 0x20 */
-	_u16 mon_lrt;		/* 0x22 */
-	_u16 num_pkts;		/* 0x24 */
-	_u16 add_packet_list;	/* 0x26 Add packets to here */
-	_u16 remove_packet_list;	/* 0x28 Send packets from here */
-
-	_u16 lrt_fail_chan;	/* 0x2A Lrt's failure channel */
-	_u16 ltt_fail_chan;	/* 0x2C Ltt's failure channel */
-
-	RUP rup;		/* 0x2E RUP structure for HOST to driver comms */
-	RUP link_rup;		/* 0x40 RUP for the link (POLL, topology etc.) */
-	_u16 attached_link;	/* 0x52 Number of attached link */
-	_u16 csum_errors;	/* 0x54 csum errors */
-	_u16 num_disconnects;	/* 0x56 number of disconnects */
-	_u16 num_sync_rcvd;	/* 0x58 # sync's received */
-	_u16 num_sync_rqst;	/* 0x5A # sync requests */
-	_u16 num_tx;		/* 0x5C Num pkts sent */
-	_u16 num_rx;		/* 0x5E Num pkts received */
-	_u16 module_attached;	/* 0x60 Module tpyes of attached */
-	_u16 led_timeout;	/* 0x62 LED timeout */
-	_u16 first_port;	/* 0x64 First port to service */
-	_u16 last_port;		/* 0x66 Last port to service */
-
-} LPB;
-
-/* Same thing again, but defined as offsets... */
-
-#define	LPB_link_number		0x00	/* 0x00 Link Number */
-#define	LPB_in_ch		0x02	/* 0x02 Link In Channel */
-#define	LPB_out_ch		0x04	/* 0x04 Link Out Channel */
-#define	LPB_attached_serial	0x06	/* 0x06 Attached serial number */
-#define	LPB_attached_host_serial 0x0A	/* 0x0A Serial number of Host who booted other end */
-#define	LPB_descheduled		0x0E	/* 0x0E Currently Descheduled */
-#define	LPB_state		0x10	/* 0x10 Current state */
-#define	LPB_send_poll		0x12	/* 0x12 Send a Poll Packet */
-#define	LPB_ltt_p		0x14	/* 0x14 Process Descriptor */
-#define	LPB_lrt_p		0x16	/* 0x16 Process Descriptor */
-#define	LPB_lrt_status		0x18	/* 0x18 Current lrt status */
-#define	LPB_ltt_status		0x1A	/* 0x1A Current ltt status */
-#define	LPB_timeout		0x1C	/* 0x1C Timeout value */
-#define	LPB_topology		0x1E	/* 0x1E Topology bits */
-#define	LPB_mon_ltt		0x20	/* 0x20 */
-#define	LPB_mon_lrt		0x22	/* 0x22 */
-#define	LPB_num_pkts		0x24	/* 0x24 */
-#define	LPB_add_packet_list	0x26	/* 0x26 Add packets to here */
-#define	LPB_remove_packet_list	0x28	/* 0x28 Send packets from here */
-#define	LPB_lrt_fail_chan	0x2A	/* 0x2A Lrt's failure channel */
-#define	LPB_ltt_fail_chan	0x2C	/* 0x2C Ltt's failure channel */
-#define	LPB_rup			0x2E	/* 0x2E RUP structure for HOST to driver comms */
-#define	LPB_link_rup		0x40	/* 0x40 RUP for the link (POLL, topology etc.) */
-#define	LPB_attached_link	0x52	/* 0x52 Number of attached link */
-#define	LPB_csum_errors		0x54	/* 0x54 csum errors */
-#define	LPB_num_disconnects	0x56	/* 0x56 number of disconnects */
-#define	LPB_num_sync_rcvd	0x58	/* 0x58 # sync's received */
-#define	LPB_num_sync_rqst	0x5A	/* 0x5A # sync requests */
-#define	LPB_num_tx		0x5C	/* 0x5C Num pkts sent */
-#define	LPB_num_rx		0x5E	/* 0x5E Num pkts received */
-#define	LPB_module_attached	0x60	/* 0x60 Module tpyes of attached */
-#define	LPB_led_timeout		0x62	/* 0x62 LED timeout */
-#define	LPB_first_port		0x64	/* 0x64 First port to service */
-#define	LPB_last_port		0x66	/* 0x66 Last port to service */
-#define	sizeof_LPB		0x68	/* structure size = 0x68 */
-
-#define	LINKS_PER_UNIT		4	/* number of links from a host */
-
-/*****************************************************************************
-********************************               *******************************
-********************************   FREE_LIST   *******************************
-********************************               *******************************
-*****************************************************************************/
-
-/* Used to overlay packet headers when allocating/freeing packets from the free list */
-
-typedef struct _FREE_LIST {
-	_u16 next;		/* 0x00 offset of next list item */
-	_u16 prev;		/* 0x02 offset of previous list item */
-
-} FREE_LIST;
-
-/* Same thing again, but defined as offsets... */
-
-#define	FL_next			0x00	/* 0x00 offset of next list item */
-#define	FL_prev			0x02	/* 0x02 offset of previous list item */
-
-/*****************************************************************************
-**********************************         ***********************************
-**********************************   PKT   ***********************************
-**********************************         ***********************************
-*****************************************************************************/
-
-/* The PKT is the main unit of communication between Host Cards and RTAs across
-   the RIO network.  */
-
-#define PKT_MAX_DATA_LEN   72	/* Size of packet data */
-
-typedef struct _PKT {
-	_u8 dest_unit;		/* 0x00 Destination Unit Id */
-	_u8 dest_port;		/* 0x01 Destination Port */
-	_u8 src_unit;		/* 0x02 Source Unit Id */
-	_u8 src_port;		/* 0x03 Source Port */
-	_u8 len;		/* 0x04 Length (in bytes) of data field */
-	_u8 control;		/* 0x05 */
-	_u8 data[PKT_MAX_DATA_LEN];	/* 0x06 Actual data */
-	_u16 csum;		/* 0x4E C-SUM */
-
-} PKT;
-
-/* Same thing again, but defined as offsets... */
-
-#define	PKT_dest_unit		0x00	/* 0x00 Destination Unit Id */
-#define	PKT_dest_port		0x01	/* 0x01 Destination Port */
-#define	PKT_src_unit		0x02	/* 0x02 Source Unit Id */
-#define	PKT_src_port		0x03	/* 0x03 Source Port */
-#define	PKT_len			0x04	/* 0x04 Length (in bytes) of data field */
-#define	PKT_control		0x05	/* 0x05 */
-#define	PKT_data		0x06	/* 0x06 Actual data */
-#define	PKT_csum		0x4E	/* 0x4E C-SUM */
-#define	sizeof_PKT		0x50	/* structure size = 0x50 */
-
-/* PKT.len definitions... */
-#define	PKT_CMD_BIT		0x80
-#define	PKT_CMD_DATA		0x80
-#define	PKT_LEN_MASK		0x7F
-
-/* PKT.control definitions... */
-#define	PKT_ACK			0x40
-#define	PKT_TGL			0x20
-#define	DATA_WNDW		0x10
-#define	PKT_TTL_MASK		0x0F
-#define	MAX_TTL			0x0F
-
-/*****************************************************************************
-*****************************                     ****************************
-*****************************   Control Packets   ****************************
-*****************************                     ****************************
-*****************************************************************************/
-
-/* The following definitions and structures define the control packets sent
-   between the driver and RIO Ports, RTAs and Host Cards. */
-
-#define	PRE_EMPTIVE		0x80	/* Pre-emptive command (sent via port's RUP) */
-
-/* "in-band" and "pre-emptive" port commands... */
-#define	OPEN			0x00	/* Driver->RIO Open a port */
-#define	CONFIG			0x01	/* Driver->RIO Configure a port */
-#define	MOPEN			0x02	/* Driver->RIO Modem open (wait for DCD) */
-#define	CLOSE			0x03	/* Driver->RIO Close a port */
-#define	WFLUSH			(0x04|PRE_EMPTIVE)	/* Driver->RIO Write flush */
-#define	RFLUSH			(0x05|PRE_EMPTIVE)	/* Driver->RIO Read flush */
-#define	RESUME			(0x06|PRE_EMPTIVE)	/* Driver->RIO Behave as if XON received */
-#define	SBREAK			0x07	/* Driver->RIO Start break */
-#define	EBREAK			0x08	/* Driver->RIO End break */
-#define	SUSPEND			(0x09|PRE_EMPTIVE)	/* Driver->RIO Behave as if XOFF received */
-#define	FCLOSE			(0x0A|PRE_EMPTIVE)	/* Driver->RIO Force close */
-#define	XPRINT			0x0B	/* Driver->RIO Xprint packet */
-#define	MBIS			(0x0C|PRE_EMPTIVE)	/* Driver->RIO Set modem lines */
-#define	MBIC			(0x0D|PRE_EMPTIVE)	/* Driver->RIO Clear modem lines */
-#define	MSET			(0x0E|PRE_EMPTIVE)	/* Driver->RIO Set modem lines */
-#define	PCLOSE			0x0F	/* Driver->RIO Pseudo close */
-#define	MGET			(0x10|PRE_EMPTIVE)	/* Driver->RIO Force update of modem status */
-#define	MEMDUMP			(0x11|PRE_EMPTIVE)	/* Driver->RIO DEBUG request for RTA memory */
-#define	READ_REGISTER		(0x12|PRE_EMPTIVE)	/* Driver->RIO DEBUG read CD1400 register */
-
-/* Remote Unit Port (RUP) packet definitions... (specified in PKT.dest_unit and PKT.src_unit) */
-#define	SYNC_RUP		0xFF	/* Download internal */
-#define	COMMAND_RUP		0xFE	/* Command ack/status */
-#define	ERROR_RUP		0xFD	/* Download internal */
-#define	POLL_RUP		0xFC	/* Download internal */
-#define	BOOT_RUP		0xFB	/* Used to boot RTAs */
-#define	ROUTE_RUP		0xFA	/* Used to specify routing/topology */
-#define	STATUS_RUP		0xF9	/* Not used */
-#define	POWER_RUP		0xF8	/* Download internal */
-
-/* COMMAND_RUP definitions... */
-#define	COMPLETE		(0x20|PRE_EMPTIVE)	/* RIO->Driver Command complete */
-#define	BREAK_RECEIVED		(0x21|PRE_EMPTIVE)	/* RIO->Driver Break received */
-#define	MODEM_STATUS		(0x22|PRE_EMPTIVE)	/* RIO->Driver Modem status change */
-
-/* BOOT_RUP definitions... */
-#define	BOOT_REQUEST		0x00	/* RIO->Driver Request for boot */
-#define	BOOT_ABORT		0x01	/* Driver->RIO Abort a boot */
-#define	BOOT_SEQUENCE		0x02	/* Driver->RIO Packet with firmware details */
-#define	BOOT_COMPLETED		0x03	/* RIO->Driver Boot completed */
-#define IFOAD			0x2F	/* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */
-#define	IDENTIFY		0x30	/* Driver->RIO Identify RTA */
-#define	ZOMBIE			0x31	/* Driver->RIO Shutdown/Flash LEDs */
-#define	UFOAD			0x32	/* Driver->RIO Shutdown/Reboot neighbouring RTA */
-#define IWAIT			0x33	/* Driver->RIO Pause booting process */
-
-/* ROUTE_RUP definitions... */
-#define	ROUTE_REQUEST		0x00	/* RIO->Driver Request an ID */
-#define	ROUTE_FOAD		0x01	/* Driver->RIO Shutdown/reboot RTA */
-#define	ROUTE_ALREADY		0x02	/* Driver->RIO Not used */
-#define	ROUTE_USED		0x03	/* Driver->RIO Not used */
-#define	ROUTE_ALLOCATE		0x04	/* Driver->RIO Allocate RTA RUP numbers */
-#define	ROUTE_REQ_TOP		0x05	/* Driver->RIO Not used */
-#define ROUTE_TOPOLOGY		0x06	/* RIO->Driver Route/Topology status */
-
-/*****************************************************************************
-**********************************          **********************************
-**********************************   OPEN   **********************************
-**********************************          **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   Sent to open a port. 
-   Structure of configuration info used with OPEN, CONFIG and MOPEN packets... */
-
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_Cor1		(PKT_Data+1)	/* Channel Option Register 1 */
-#define	PKT_Cor2		(PKT_Data+2)	/* Channel Option Register 2 */
-#define	PKT_Cor4		(PKT_Data+3)	/* Channel Option Register 4 */
-#define	PKT_Cor5		(PKT_Data+4)	/* Channel Option Register 5 */
-#define	PKT_TxXon		(PKT_Data+5)	/* Transmit XON character */
-#define	PKT_TxXoff		(PKT_Data+6)	/* Transmit XOFF character */
-#define	PKT_RxXon		(PKT_Data+7)	/* Receive XON character */
-#define	PKT_RxXoff		(PKT_Data+8)	/* Receive XOFF character */
-#define	PKT_Lnext		(PKT_Data+9)	/* Lnext character */
-#define	PKT_TxBaud		(PKT_Data+10)	/* Transmit baud rate */
-#define	PKT_RxBaud		(PKT_Data+11)	/* Receive baud rate */
-
-/* COR1 definitions... */
-#define	COR1_PARITY		0xE0	/* Parity mask */
-#define	COR1_NONE		0x00	/* No parity */
-#define	COR1_SPACE		0x20	/* Space parity */
-#define	COR1_EVEN		0x40	/* Even parity */
-#define	COR1_MARK		0xA0	/* Mark parity */
-#define	COR1_ODD		0xC0	/* Odd parity */
-
-#define	COR1_STOPBITS		0x0C	/* Stop bits mask */
-#define	COR1_STOP1		0x00	/* 1 stop bit */
-#define	COR1_STOP1_5		0x04	/* 1.5 stop bits */
-#define	COR1_STOP2		0x08	/* 2 stop bits */
-
-#define	COR1_DATABITS		0x03	/* Data bits mask */
-#define	COR1_DATA5		0x00	/* 5 data bits */
-#define	COR1_DATA6		0x01	/* 6 data bits */
-#define	COR1_DATA7		0x02	/* 7 data bits */
-#define	COR1_DATA8		0x03	/* 8 data bits */
-
-/* COR2 definitions... */
-#define	COR2_XON_TXFLOW		0x40	/* XON/XOFF Transmit Flow */
-#define	COR2_XANY_TXFLOW	0xC0	/* XON/XANY Transmit Flow */
-#define	COR2_HUPCL		0x20	/* Hang Up On Close */
-#define	COR2_DSR_TXFLOW		0x08	/* DSR Transmit Flow Control */
-#define	COR2_RTS_RXFLOW		0x04	/* RTS Receive Flow Control */
-#define	COR2_CTS_TXFLOW		0x02	/* CTS Transmit Flow Control */
-#define	COR2_XON_RXFLOW		0x01	/* XON/XOFF Receive Flow */
-
-/* COR4 definition... */
-#define	COR4_IGNCR		0x80	/* Discard received CR */
-#define	COR4_ICRNL		0x40	/* Map received CR -> NL */
-#define	COR4_INLCR		0x20	/* Map received NL -> CR */
-#define	COR4_IGNBRK		0x10	/* Ignore Received Break */
-#define	COR4_NBRKINT		0x08	/* No interrupt on rx Break */
-#define	COR4_IGNPAR		0x04	/* ignore rx parity error chars */
-#define	COR4_PARMRK		0x02	/* Mark rx parity error chars */
-#define	COR4_RAISEMOD		0x01	/* Raise modem lines on !0 baud */
-
-/* COR5 definitions... */
-#define	COR5_ISTRIP		0x80	/* Strip input chars to 7 bits */
-#define	COR5_LNE		0x40	/* Enable LNEXT processing */
-#define	COR5_CMOE		0x20	/* Match good & error characters */
-#define	COR5_TAB3		0x10	/* TAB3 mode */
-#define	COR5_TSTATE_ON		0x08	/* Enable tbusy/tstop monitoring */
-#define	COR5_TSTATE_OFF		0x04	/* Disable tbusy/tstop monitoring */
-#define	COR5_ONLCR		0x02	/* NL -> CR NL on output */
-#define	COR5_OCRNL		0x01	/* CR -> NL on output */
-
-/* RxBaud and TxBaud definitions... */
-#define	RIO_B0			0x00	/* RTS / DTR signals dropped */
-#define	RIO_B50			0x01	/* 50 baud */
-#define	RIO_B75			0x02	/* 75 baud */
-#define	RIO_B110		0x03	/* 110 baud */
-#define	RIO_B134		0x04	/* 134.5 baud */
-#define	RIO_B150		0x05	/* 150 baud */
-#define	RIO_B200		0x06	/* 200 baud */
-#define	RIO_B300		0x07	/* 300 baud */
-#define	RIO_B600		0x08	/* 600 baud */
-#define	RIO_B1200		0x09	/* 1200 baud */
-#define	RIO_B1800		0x0A	/* 1800 baud */
-#define	RIO_B2400		0x0B	/* 2400 baud */
-#define	RIO_B4800		0x0C	/* 4800 baud */
-#define	RIO_B9600		0x0D	/* 9600 baud */
-#define	RIO_B19200		0x0E	/* 19200 baud */
-#define	RIO_B38400		0x0F	/* 38400 baud */
-#define	RIO_B56000		0x10	/* 56000 baud */
-#define	RIO_B57600		0x11	/* 57600 baud */
-#define	RIO_B64000		0x12	/* 64000 baud */
-#define	RIO_B115200		0x13	/* 115200 baud */
-#define	RIO_B2000		0x14	/* 2000 baud */
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   CONFIG   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   CONFIG is sent from the driver to configure an already opened port.
-   Packet structure is same as OPEN.  */
-
-/*****************************************************************************
-*********************************           **********************************
-*********************************   MOPEN   **********************************
-*********************************           **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   MOPEN is sent from the driver to open a port attached to a modem. (in-band)
-   Packet structure is same as OPEN.  */
-
-/*****************************************************************************
-*********************************           **********************************
-*********************************   CLOSE   **********************************
-*********************************           **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   CLOSE is sent from the driver to close a previously opened port.
-   No parameters.
- */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-/*****************************************************************************
-*********************************            *********************************
-*********************************   WFLUSH   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   WFLUSH is sent pre-emptively from the driver to flush the write buffers and
-   packets of a port.  (pre-emptive)
-   
-   WFLUSH is also sent in-band from the driver to a port as a marker to end
-   write flushing previously started by a pre-emptive WFLUSH packet. (in-band)
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   RFLUSH   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   RFLUSH is sent pre-emptively from the driver to flush the read buffers and
-   packets of a port.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   RESUME   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   RESUME is sent pre-emptively from the driver to cause a port to resume 
-   transmission of data if blocked by XOFF.  (as if XON had been received)
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   SBREAK   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   SBREAK is sent in-band from the driver to a port to suspend data and start
-   break signal transmission.
-
-   If the break delay is 0, the break signal will be acknowledged with a
-   RUP_COMMAND, COMPLETE packet and continue until an EBREAK packet is received.
-
-   Otherwise, there is no acknowledgement and the break signal will last for the
-   specified number of mS.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_BreakDelay		(PKT_Data+1)	/* Break delay in mS */
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   EBREAK   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   EBREAK is sent in-band from the driver to a port to stop transmission of a
-   break signal.
-
-   No parameters.  */
-
-/*****************************************************************************
-*********************************             ********************************
-*********************************   SUSPEND   ********************************
-*********************************             ********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   SUSPEND is sent pre-emptively from the driver to cause a port to suspend
-   transmission of data.  (as if XOFF had been received)
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   FCLOSE   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   FCLOSE is sent pre-emptively from the driver to force close a port.
-   A force close flushes receive and transmit queues, and also lowers all output
-   modem signals if the COR5_HUPCL (Hang Up On Close) flag is set.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   XPRINT   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   XPRINT is sent as a normal I/O data packet except that the PKT_CMD_BIT of
-   the "len" field is set, and the first "data" byte is XPRINT.
-
-   The I/O data in the XPRINT packet will contain the following:
-   -	Transparent Print Start Sequence
-   -	Transparent Print Data
-   -	Transparent Print Stop Sequence.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-**********************************          **********************************
-**********************************   MBIS   **********************************
-**********************************          **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   MBIS is sent pre-emptively from the driver to set a port's modem signals.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-#define	PKT_ModemSet		(PKT_Data+4)	/* Modem set signals mask */
-
-/* ModemSet definitions... */
-#define	MBIS_RTS		0x01	/* RTS modem signal */
-#define	MBIS_DTR		0x02	/* DTR modem signal */
-
-/*****************************************************************************
-**********************************          **********************************
-**********************************   MBIC   **********************************
-**********************************          **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   MBIC is sent pre-emptively from the driver to clear a port's modem signals.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-#define	PKT_ModemClear		(PKT_Data+4)	/* Modem clear signals mask */
-
-/* ModemClear definitions... */
-#define	MBIC_RTS		0x01	/* RTS modem signal */
-#define	MBIC_DTR		0x02	/* DTR modem signal */
-
-/*****************************************************************************
-**********************************          **********************************
-**********************************   MSET   **********************************
-**********************************          **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   MSET is sent pre-emptively from the driver to set/clear a port's modem signals. */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#endif
-
-#define	PKT_ModemSet		(PKT_Data+4)	/* Modem set signals mask */
-
-/* ModemSet definitions... */
-#define	MSET_RTS		0x01	/* RTS modem signal */
-#define	MSET_DTR		0x02	/* DTR modem signal */
-
-/*****************************************************************************
-*********************************            *********************************
-*********************************   PCLOSE   *********************************
-*********************************            *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
-   PCLOSE is sent from the driver to pseudo close a previously opened port.
-   
-   The port will close when all data has been sent/received, however, the
-   port's transmit / receive and modem signals will be left enabled and the
-   port marked internally as Pseudo Closed. */
-
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-
-/*****************************************************************************
-**********************************          **********************************
-**********************************   MGET   **********************************
-**********************************          **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   MGET is sent pre-emptively from the driver to request the port's current modem signals. */
-
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-
-/*****************************************************************************
-*********************************             ********************************
-*********************************   MEMDUMP   ********************************
-*********************************             ********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   MEMDUMP is sent pre-emptively from the driver to request a dump of 32 bytes
-   of the specified port's RTA address space.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
-#define	PKT_Address		(PKT_Data+6)	/* Requested address */
-
-/*****************************************************************************
-******************************                   *****************************
-******************************   READ_REGISTER   *****************************
-******************************                   *****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   READ_REGISTER is sent pre-emptively from the driver to request the contents
-   of the CD1400 register specified in address.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
-#define	PKT_Address		(PKT_Data+6)	/* Requested address */
-
-/*****************************************************************************
-************************                            **************************
-************************   COMMAND_RUP - COMPLETE   **************************
-************************                            **************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   COMMAND_RUP - COMPLETE is sent in response to all port I/O control command
-   packets, except MEMDUMP and READ_REGISTER.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
-#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
-#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
-#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
-
-/* ModemStatus definitions... */
-#define	MODEM_DSR		0x80	/* Data Set Ready modem state */
-#define	MODEM_CTS		0x40	/* Clear To Send modem state */
-#define	MODEM_RI		0x20	/* Ring Indicate modem state */
-#define	MODEM_CD		0x10	/* Carrier Detect modem state */
-#define	MODEM_TSTOP		0x08	/* Transmit Stopped state */
-#define	MODEM_TEMPTY		0x04	/* Transmit Empty state */
-#define	MODEM_DTR		0x02	/* DTR modem output state */
-#define	MODEM_RTS		0x01	/* RTS modem output state */
-
-/* PortStatus definitions... */
-#define	PORT_ISOPEN		0x01	/* Port open ? */
-#define	PORT_HUPCL		0x02	/* Hangup on close? */
-#define	PORT_MOPENPEND		0x04	/* Modem open pending */
-#define	PORT_ISPARALLEL		0x08	/* Parallel port */
-#define	PORT_BREAK		0x10	/* Port on break */
-#define	PORT_STATUSPEND		0020	/* Status packet pending */
-#define	PORT_BREAKPEND		0x40	/* Break packet pending */
-#define	PORT_MODEMPEND		0x80	/* Modem status packet pending */
-
-/*****************************************************************************
-************************                            **************************
-************************   COMMAND_RUP - COMPLETE   **************************
-************************                            **************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   COMMAND_RUP - COMPLETE is sent in response to all port I/O control command
-   packets, except MEMDUMP and READ_REGISTER.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
-#endif
-#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
-#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
-#if 0
-#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
-#endif
-
-/* ModemStatus definitions... */
-#define	MODEM_DSR		0x80	/* Data Set Ready modem state */
-#define	MODEM_CTS		0x40	/* Clear To Send modem state */
-#define	MODEM_RI		0x20	/* Ring Indicate modem state */
-#define	MODEM_CD		0x10	/* Carrier Detect modem state */
-#define	MODEM_TSTOP		0x08	/* Transmit Stopped state */
-#define	MODEM_TEMPTY		0x04	/* Transmit Empty state */
-#define	MODEM_DTR		0x02	/* DTR modem output state */
-#define	MODEM_RTS		0x01	/* RTS modem output state */
-
-/* PortStatus definitions... */
-#define	PORT_ISOPEN		0x01	/* Port open ? */
-#define	PORT_HUPCL		0x02	/* Hangup on close? */
-#define	PORT_MOPENPEND		0x04	/* Modem open pending */
-#define	PORT_ISPARALLEL		0x08	/* Parallel port */
-#define	PORT_BREAK		0x10	/* Port on break */
-#define	PORT_STATUSPEND		0020	/* Status packet pending */
-#define	PORT_BREAKPEND		0x40	/* Break packet pending */
-#define	PORT_MODEMPEND		0x80	/* Modem status packet pending */
-
-/*****************************************************************************
-********************                                      ********************
-********************   COMMAND_RUP - COMPLETE - MEMDUMP   ********************
-********************                                      ********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   COMMAND_RUP - COMPLETE - MEMDUMP is sent as an acknowledgement for a MEMDUMP
-   port I/O control command packet.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
-#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
-#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
-#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
-#define	PKT_Address		(PKT_Data+6)	/* Requested address */
-#endif
-#define	PKT_Dump		(PKT_Data+8)	/* 32bytes of requested dump data */
-
-/*****************************************************************************
-*****************                                            *****************
-*****************   COMMAND_RUP - COMPLETE - READ_REGISTER   *****************
-*****************                                            *****************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   COMMAND_RUP - COMPLETE - READ_REGISTER is sent as an acknowledgement for a
-   READ_REGISTER port I/O control command packet.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/*Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/*Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
-#endif
-#define	PKT_RegisterValue	(PKT_Data+3)	/* Modem signal status */
-#if 0
-#define	PKT_PortStatus		(PKT_Data+4)	/* Port signal status */
-#define	PKT_SubCmd		(PKT_Data+5)	/* Sub Command */
-#endif
-
-/*****************************************************************************
-*********************                                  ***********************
-*********************   COMMAND_RUP - BREAK_RECEIVED   ***********************
-*********************                                  ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   COMMAND_RUP - BREAK_RECEIVED packets are sent when the port detects a receive BREAK signal.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
-#endif
-
-/*****************************************************************************
-*********************                                *************************
-*********************   COMMAND_RUP - MODEM_STATUS   *************************
-*********************                                *************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   COMMAND_RUP - MODEM_STATUS packets are sent whenever the port detects a
-   change in the input modem signal states.
-
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_PhbNum		(PKT_Data+1)	/* Port number wrt RTA */
-#define	PKT_Cmd2		(PKT_Data+2)	/* Command code copy */
-#define	PKT_ModemStatus		(PKT_Data+3)	/* Modem signal status */
-#endif
-
-/*****************************************************************************
-************************                             *************************
-************************   BOOT_RUP - BOOT_REQUEST   *************************
-************************                             *************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   BOOT_RUP - BOOT_REQUEST packets are sent to the Driver from RIO to request
-   firmware code to load onto attached RTAs.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-
-/*****************************************************************************
-************************                              ************************
-************************   BOOT_RUP - BOOT_SEQUENCE   ************************
-************************                              ************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   BOOT_RUP - BOOT_SEQUENCE packets are sent from the Driver to RIO in response
-   to a BOOT_RUP - BOOT_REQUEST packet.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_NumPackets		(PKT_Data+2)	/* Packets required to load firmware */
-#define	PKT_LoadBase		(PKT_Data+4)	/* RTA firmware load address */
-#define	PKT_CodeSize		(PKT_Data+6)	/* Size of firmware in bytes */
-#define	PKT_CmdString		(PKT_Data+8)	/* Command string */
-
-/*****************************************************************************
-************************                               ***********************
-************************   BOOT_RUP - BOOT_COMPLETED   ***********************
-************************                               ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   BOOT_RUP - BOOT_COMPLETE is sent to the Driver from RIO when downloading of
-   RTA firmware has completed.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_LinkNumber		(PKT_Data+1)	/* Link number RTA booted on */
-#define	PKT_SerialNumber	(PKT_Data+2)	/* 4 byte serial number */
-
-/*****************************************************************************
-************************                               ***********************
-************************   BOOT_RUP - Packet Request   ***********************
-************************                               ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   BOOT_RUP packet without the PKT_CMD_BIT set in the PKT->len field is sent
-   from RIO to the Driver as a request for a firmware boot packet. */
-
-#define	PKT_SequenceNumber	(PKT_Data+0)	/* Packet sequence number */
-
-/*****************************************************************************
-***********************                                ***********************
-***********************   BOOT_RUP - Packet Response   ***********************
-***********************                                ***********************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   In response to a BOOT_RUP boot packet request, the driver fills out the response
-   packet with the 70 bytes of the requested sequence.
-   */
-#if 0
-#define	PKT_SequenceNumber	(PKT_Data+0)	/* Packet sequence number */
-#endif
-#define	PKT_FirmwarePacket	(PKT_Data+2)	/* Firmware packet */
-
-/*****************************************************************************
-****************************                      ****************************
-****************************   BOOT_RUP - IFOAD   ****************************
-****************************                      ****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   BOOT_RUP - IFOAD packets are sent from the Driver to an RTA to cause the
-   RTA to shut down and reboot.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_IfoadId1		(PKT_Data+2)	/* IFOAD Id 1 */
-#define	PKT_IfoadId2		(PKT_Data+3)	/* IFOAD Id 2 */
-
-#define	IFOADID1		0xAD
-#define	IFOADID2		0xF0
-
-/*****************************************************************************
-**************************                         ***************************
-**************************   BOOT_RUP - IDENTIFY   ***************************
-**************************                         ***************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   BOOT_RUP - IDENTIFY packets are sent from the Driver to an RTA to cause the
-   RTA to flash its LEDs for a period of time.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_IdentifyId		(PKT_Data+2)	/* defines pattern to flash */
-
-/*****************************************************************************
-****************************                       ***************************
-****************************   BOOT_RUP - ZOMBIE   ***************************
-****************************                       ***************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   BOOT_RUP - ZOMBIE packets are sent from the Driver to an RTA to cause the
-   RTA to shut down and flash it's LEDs.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_ZombieId1		(PKT_Data+2)	/* ZOMBIE Id 1 */
-#define	PKT_ZombieId2		(PKT_Data+3)	/* ZOMBIE Id 2 */
-
-#define	ZOMBIEID1		0x52
-#define	ZOMBIEID2		0x21
-
-/*****************************************************************************
-****************************                      ****************************
-****************************   BOOT_RUP - UFOAD   ****************************
-****************************                      ****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   BOOT_RUP - UFOAD packets are sent from the Driver to an RTA to cause the RTA
-   to ask it's neighbouring RTA to shut down and reboot.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_LinkNumber		(PKT_Data+1)	/* Link number of RTA to UFOAD */
-#endif
-#define	PKT_UfoadId1		(PKT_Data+2)	/* UFOAD Id 1 */
-#define	PKT_UfoadId2		(PKT_Data+3)	/* UFOAD Id 2 */
-
-#define	UFOADID1		0x1E
-#define	UFOADID2		0x0D
-
-/*****************************************************************************
-****************************                      ****************************
-****************************   BOOT_RUP - IWAIT   ****************************
-****************************                      ****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   BOOT_RUP - IWAIT packets are sent from the Driver to an RTA to cause the RTA
-   to pause booting on the specified link for 30 seconds.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#define	PKT_LinkNumber		(PKT_Data+1)	/* Link number of RTA to UFOAD */
-#endif
-#define	PKT_IwaitId1		(PKT_Data+2)	/* IWAIT Id 1 */
-#define	PKT_IwaitId2		(PKT_Data+3)	/* IWAIT Id 2 */
-
-#define	IWAITID1		0xDE
-#define	IWAITID2		0xB1
-
-/*****************************************************************************
-************************                               ***********************
-************************   ROUTE_RUP - ROUTE_REQUEST   ***********************
-************************                               ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   ROUTE_RUP - ROUTE_REQUEST packets are sent from a newly booted or connected
-   RTA to a Driver to request an ID (RUP or unit number).
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_SerialNumber	(PKT_Data+2)	/* 4 byte serial number */
-#define	PKT_ModuleTypes		(PKT_Data+6)	/* RTA Module types */
-
-/* ModuleTypes definitions... */
-#define	MOD_BLANK		0x0F	/* Blank plate attached */
-#define	MOD_RS232DB25		0x00	/* RS232 DB25 connector */
-#define	MOD_RS232RJ45		0x01	/* RS232 RJ45 connector */
-#define	MOD_RS422DB25		0x02	/* RS422 DB25 connector */
-#define	MOD_RS485DB25		0x03	/* RS485 DB25 connector */
-#define	MOD_PARALLEL		0x04	/* Centronics parallel */
-
-#define	MOD2			0x08	/* Set to indicate Rev2 module */
-
-/*****************************************************************************
-*************************                            *************************
-*************************   ROUTE_RUP - ROUTE_FOAD   *************************
-*************************                            *************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   ROUTE_RUP - ROUTE_FOAD packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST
-   packet to cause the RTA to "Fall Over And Die"., i.e. shutdown and reboot.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_RouteCmdString	(PKT_Data+2)	/* Command string */
-
-/*****************************************************************************
-***********************                                ***********************
-***********************   ROUTE_RUP - ROUTE_ALLOCATE   ***********************
-***********************                                ***********************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
-   ROUTE_RUP - ROUTE_ALLOCATE packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST
-   packet to allocate the RTA's Id number (RUP number 1..16)
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_IdNum		(PKT_Data+1)	/* RUP number for ports 1..8 */
-#if 0
-#define	PKT_RouteCmdString	(PKT_Data+2)	/* Command string */
-#endif
-#define	PKT_IdNum2		(PKT_Data+0x17)	/* RUP number for ports 9..16 */
-
-/*****************************************************************************
-***********************                                ***********************
-***********************   ROUTE_RUP - ROUTE_TOPOLOGY   ***********************
-***********************                                ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
-   ROUTE_RUP - ROUTE_TOPOLOGY packet is sent to inform the driver of an RTA's
-   current link status.
-   */
-#if 0
-#define	PKT_Cmd			(PKT_Data+0)	/* Command code */
-#endif
-#define	PKT_Link1Rup		(PKT_Data+2)	/* Link 1 RUP number */
-#define	PKT_Link1Link		(PKT_Data+3)	/* Link 1 link number */
-#define	PKT_Link2Rup		(PKT_Data+4)	/* Link 2 RUP number */
-#define	PKT_Link2Link		(PKT_Data+5)	/* Link 2 link number */
-#define	PKT_Link3Rup		(PKT_Data+6)	/* Link 3 RUP number */
-#define	PKT_Link3Link		(PKT_Data+7)	/* Link 3 link number */
-#define	PKT_Link4Rup		(PKT_Data+8)	/* Link 4 RUP number */
-#define	PKT_Link4Link		(PKT_Data+9)	/* Link 4 link number */
-#define	PKT_RtaVpdProm		(PKT_Data+10)	/* 32 bytes of RTA VPD PROM Contents */
-
-#endif				/* _sxwinif_h */
-
-/* End of RIOWINIF.H */