summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRafael J. Wysocki <rafael.j.wysocki@intel.com>2014-11-25 02:18:58 +0100
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2014-11-25 02:18:58 +0100
commita26033a1f56b7b1f8a56050c0a9095694aecae11 (patch)
tree8bb03cc2c30770f1e795ea9f7ebeceb6a6ba3fff
parent5d01410fe4d92081f349b013a2e7a95429e4f2c9 (diff)
parent8019f6962708985782b65bd97be88046a55e1e4d (diff)
Merge branch 'ib-mfd-iio-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into acpi-pmic
Pull MFD changes that the ACPI PMIC changes depend on from Lee Jones.
-rw-r--r--drivers/iio/adc/Kconfig8
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/axp288_adc.c261
-rw-r--r--drivers/mfd/Kconfig3
-rw-r--r--drivers/mfd/axp20x.c361
-rw-r--r--include/linux/mfd/axp20x.h59
6 files changed, 637 insertions, 56 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 88bdc8f612e..bc4e787096e 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -127,6 +127,14 @@ config AT91_ADC
help
Say yes here to build support for Atmel AT91 ADC.
+config AXP288_ADC
+ tristate "X-Powers AXP288 ADC driver"
+ depends on MFD_AXP20X
+ help
+ Say yes here to have support for X-Powers power management IC (PMIC) ADC
+ device. Depending on platform configuration, this general purpose ADC can
+ be used for sampling sensors such as thermal resistors.
+
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index cb88a6a23b8..f30093f5b67 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1027) += max1027.o
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
new file mode 100644
index 00000000000..08bcfb061ca
--- /dev/null
+++ b/drivers/iio/adc/axp288_adc.c
@@ -0,0 +1,261 @@
+/*
+ * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define AXP288_ADC_EN_MASK 0xF1
+#define AXP288_ADC_TS_PIN_GPADC 0xF2
+#define AXP288_ADC_TS_PIN_ON 0xF3
+
+enum axp288_adc_id {
+ AXP288_ADC_TS,
+ AXP288_ADC_PMIC,
+ AXP288_ADC_GP,
+ AXP288_ADC_BATT_CHRG_I,
+ AXP288_ADC_BATT_DISCHRG_I,
+ AXP288_ADC_BATT_V,
+ AXP288_ADC_NR_CHAN,
+};
+
+struct axp288_adc_info {
+ int irq;
+ struct regmap *regmap;
+};
+
+static const struct iio_chan_spec const axp288_adc_channels[] = {
+ {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 0,
+ .address = AXP288_TS_ADC_H,
+ .datasheet_name = "TS_PIN",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 1,
+ .address = AXP288_PMIC_ADC_H,
+ .datasheet_name = "PMIC_TEMP",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 2,
+ .address = AXP288_GP_ADC_H,
+ .datasheet_name = "GPADC",
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 3,
+ .address = AXP20X_BATT_CHRG_I_H,
+ .datasheet_name = "BATT_CHG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 4,
+ .address = AXP20X_BATT_DISCHRG_I_H,
+ .datasheet_name = "BATT_DISCHRG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_VOLTAGE,
+ .channel = 5,
+ .address = AXP20X_BATT_V_H,
+ .datasheet_name = "BATT_V",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \
+ _consumer_channel) \
+ { \
+ .adc_channel_label = _adc_channel_label, \
+ .consumer_dev_name = _consumer_dev_name, \
+ .consumer_channel = _consumer_channel, \
+ }
+
+/* for consumer drivers */
+static struct iio_map axp288_adc_default_maps[] = {
+ AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
+ AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
+ AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
+ AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
+ AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
+ AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
+ {},
+};
+
+static int axp288_adc_read_channel(int *val, unsigned long address,
+ struct regmap *regmap)
+{
+ u8 buf[2];
+
+ if (regmap_bulk_read(regmap, address, buf, 2))
+ return -EIO;
+ *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
+
+ return IIO_VAL_INT;
+}
+
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+ unsigned long address)
+{
+ /* channels other than GPADC do not need to switch TS pin */
+ if (address != AXP288_GP_ADC_H)
+ return 0;
+
+ return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+}
+
+static int axp288_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct axp288_adc_info *info = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+ chan->address)) {
+ dev_err(&indio_dev->dev, "GPADC mode\n");
+ ret = -EINVAL;
+ break;
+ }
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+ chan->address))
+ dev_err(&indio_dev->dev, "TS pin restore\n");
+ break;
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+ /* ADC should be always enabled for internal FG to function */
+ if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+ return -EIO;
+
+ return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
+static const struct iio_info axp288_adc_iio_info = {
+ .read_raw = &axp288_adc_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int axp288_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct axp288_adc_info *info;
+ struct iio_dev *indio_dev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ info = iio_priv(indio_dev);
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return info->irq;
+ }
+ platform_set_drvdata(pdev, indio_dev);
+ info->regmap = axp20x->regmap;
+ /*
+ * Set ADC to enabled state at all time, including system suspend.
+ * otherwise internal fuel gauge functionality may be affected.
+ */
+ ret = axp288_adc_set_state(axp20x->regmap);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable ADC device\n");
+ return ret;
+ }
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = pdev->name;
+ indio_dev->channels = axp288_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
+ indio_dev->info = &axp288_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register iio device\n");
+ goto err_array_unregister;
+ }
+ return 0;
+
+err_array_unregister:
+ iio_map_array_unregister(indio_dev);
+
+ return ret;
+}
+
+static int axp288_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+ iio_device_unregister(indio_dev);
+ iio_map_array_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_device_id axp288_adc_id_table[] = {
+ { .name = "axp288_adc" },
+ {},
+};
+
+static struct platform_driver axp288_adc_driver = {
+ .probe = axp288_adc_probe,
+ .remove = axp288_adc_remove,
+ .id_table = axp288_adc_id_table,
+ .driver = {
+ .name = "axp288_adc",
+ },
+};
+
+MODULE_DEVICE_TABLE(platform, axp288_adc_id_table);
+
+module_platform_driver(axp288_adc_driver);
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
+MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea70bbc..9af299ba711 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -74,7 +74,8 @@ config MFD_AXP20X
select REGMAP_IRQ
depends on I2C=y
help
- If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ If you say Y here you get support for the X-Powers AXP202, AXP209 and
+ AXP288 power management IC (PMIC).
This driver include only the core APIs. You have to select individual
components like regulators or the PEK (Power Enable Key) under the
corresponding menus.
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 6231adbb295..971b0eb8d82 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1,9 +1,9 @@
/*
- * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ * axp20x.c - MFD core driver for the X-Powers' Power Management ICs
*
- * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
- * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
- * as well as 4 configurable GPIOs.
+ * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
+ * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as configurable GPIOs.
*
* Author: Carlo Caione <carlo@caione.org>
*
@@ -25,9 +25,16 @@
#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/acpi.h>
#define AXP20X_OFF 0x80
+static const char const *axp20x_model_names[] = {
+ "AXP202",
+ "AXP209",
+ "AXP288",
+};
+
static const struct regmap_range axp20x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
@@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+static const struct regmap_range axp288_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
+};
+
+static const struct regmap_range axp288_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
+};
+
+static const struct regmap_access_table axp288_writeable_table = {
+ .yes_ranges = axp288_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
+};
+
+static const struct regmap_access_table axp288_volatile_table = {
+ .yes_ranges = axp288_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
+};
+
static struct resource axp20x_pek_resources[] = {
{
.name = "PEK_DBR",
@@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = {
},
};
+static struct resource axp288_battery_resources[] = {
+ {
+ .start = AXP288_IRQ_QWBTU,
+ .end = AXP288_IRQ_QWBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTU,
+ .end = AXP288_IRQ_WBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QWBTO,
+ .end = AXP288_IRQ_QWBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTO,
+ .end = AXP288_IRQ_WBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL2,
+ .end = AXP288_IRQ_WL2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL1,
+ .end = AXP288_IRQ_WL1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
-#define AXP20X_IRQ(_irq, _off, _mask) \
- [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+static const struct regmap_config axp288_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp288_writeable_table,
+ .volatile_table = &axp288_volatile_table,
+ .max_register = AXP288_FG_TUNE5,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
+ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
static const struct regmap_irq axp20x_regmap_irqs[] = {
- AXP20X_IRQ(ACIN_OVER_V, 0, 7),
- AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
- AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
- AXP20X_IRQ(VBUS_OVER_V, 0, 4),
- AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
- AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
- AXP20X_IRQ(VBUS_V_LOW, 0, 1),
- AXP20X_IRQ(BATT_PLUGIN, 1, 7),
- AXP20X_IRQ(BATT_REMOVAL, 1, 6),
- AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
- AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
- AXP20X_IRQ(CHARG, 1, 3),
- AXP20X_IRQ(CHARG_DONE, 1, 2),
- AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
- AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
- AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
- AXP20X_IRQ(CHARG_I_LOW, 2, 6),
- AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
- AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
- AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
- AXP20X_IRQ(PEK_SHORT, 2, 1),
- AXP20X_IRQ(PEK_LONG, 2, 0),
- AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
- AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
- AXP20X_IRQ(VBUS_VALID, 3, 5),
- AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
- AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
- AXP20X_IRQ(VBUS_SESS_END, 3, 2),
- AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
- AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
- AXP20X_IRQ(TIMER, 4, 7),
- AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
- AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
- AXP20X_IRQ(GPIO3_INPUT, 4, 3),
- AXP20X_IRQ(GPIO2_INPUT, 4, 2),
- AXP20X_IRQ(GPIO1_INPUT, 4, 1),
- AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0),
+ INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
+ INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
+ INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
+ INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
+ INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
+ INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
+ INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
+ INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
+};
+
+/* some IRQs are compatible with axp20x models */
+static const struct regmap_irq axp288_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
+ INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3),
+ INIT_REGMAP_IRQ(AXP288, OV, 0, 4),
+
+ INIT_REGMAP_IRQ(AXP288, DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3),
+ INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
+ INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
+ INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6),
+ INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7),
+
+ INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
+ INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
+ INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
+ INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3),
+ INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
+ INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
+ INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
+ INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
+
+ INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
+ INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
+
+ INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
+ INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
+ INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
+ INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
+ INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
+ INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
+ INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
+ INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7),
+
+ INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
+ INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
static const struct of_device_id axp20x_of_match[] = {
@@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+static struct acpi_device_id axp20x_acpi_match[] = {
+ {
+ .id = "INT33F4",
+ .driver_data = AXP288_ID,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match);
+
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
- .num_regs = 5,
+ .mask_invert = true,
+ .init_ack_masked = true,
.irqs = axp20x_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .num_regs = 5,
+
+};
+
+static const struct regmap_irq_chip axp288_regmap_irq_chip = {
+ .name = "axp288_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
+ .irqs = axp288_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp288_regmap_irqs),
+ .num_regs = 6,
+
};
static struct mfd_cell axp20x_cells[] = {
@@ -150,36 +281,155 @@ static struct mfd_cell axp20x_cells[] = {
},
};
+static struct resource axp288_adc_resources[] = {
+ {
+ .name = "GPADC",
+ .start = AXP288_IRQ_GPADC,
+ .end = AXP288_IRQ_GPADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource axp288_charger_resources[] = {
+ {
+ .start = AXP288_IRQ_OV,
+ .end = AXP288_IRQ_OV,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_DONE,
+ .end = AXP288_IRQ_DONE,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CHARGING,
+ .end = AXP288_IRQ_CHARGING,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_QUIT,
+ .end = AXP288_IRQ_SAFE_QUIT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_ENTER,
+ .end = AXP288_IRQ_SAFE_ENTER,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTU,
+ .end = AXP288_IRQ_QCBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTU,
+ .end = AXP288_IRQ_CBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTO,
+ .end = AXP288_IRQ_QCBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTO,
+ .end = AXP288_IRQ_CBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell axp288_cells[] = {
+ {
+ .name = "axp288_adc",
+ .num_resources = ARRAY_SIZE(axp288_adc_resources),
+ .resources = axp288_adc_resources,
+ },
+ {
+ .name = "axp288_charger",
+ .num_resources = ARRAY_SIZE(axp288_charger_resources),
+ .resources = axp288_charger_resources,
+ },
+ {
+ .name = "axp288_battery",
+ .num_resources = ARRAY_SIZE(axp288_battery_resources),
+ .resources = axp288_battery_resources,
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
+ if (axp20x_pm_power_off->variant == AXP288_ID)
+ return;
+
regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
AXP20X_OFF);
}
+static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
+{
+ const struct acpi_device_id *acpi_id;
+ const struct of_device_id *of_id;
+
+ if (dev->of_node) {
+ of_id = of_match_device(axp20x_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+ } else {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id || !acpi_id->driver_data) {
+ dev_err(dev, "Unable to match ACPI ID and data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) acpi_id->driver_data;
+ }
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
+ axp20x->cells = axp20x_cells;
+ axp20x->regmap_cfg = &axp20x_regmap_config;
+ axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
+ break;
+ case AXP288_ID:
+ axp20x->cells = axp288_cells;
+ axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
+ axp20x->regmap_cfg = &axp288_regmap_config;
+ axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
+ break;
+ default:
+ dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
+ return -EINVAL;
+ }
+ dev_info(dev, "AXP20x variant %s found\n",
+ axp20x_model_names[axp20x->variant]);
+
+ return 0;
+}
+
static int axp20x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct axp20x_dev *axp20x;
- const struct of_device_id *of_id;
int ret;
axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
if (!axp20x)
return -ENOMEM;
- of_id = of_match_device(axp20x_of_match, &i2c->dev);
- if (!of_id) {
- dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
- return -ENODEV;
- }
- axp20x->variant = (long) of_id->data;
+ ret = axp20x_match_device(axp20x, &i2c->dev);
+ if (ret)
+ return ret;
axp20x->i2c_client = i2c;
axp20x->dev = &i2c->dev;
dev_set_drvdata(axp20x->dev, axp20x);
- axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg);
if (IS_ERR(axp20x->regmap)) {
ret = PTR_ERR(axp20x->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
@@ -188,15 +438,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c,
ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
IRQF_ONESHOT | IRQF_SHARED, -1,
- &axp20x_regmap_irq_chip,
+ axp20x->regmap_irq_chip,
&axp20x->regmap_irqc);
if (ret) {
dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
return ret;
}
- ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
- ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+ axp20x->nr_cells, NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
@@ -234,6 +484,7 @@ static struct i2c_driver axp20x_i2c_driver = {
.name = "axp20x",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(axp20x_of_match),
+ .acpi_match_table = ACPI_PTR(axp20x_acpi_match),
},
.probe = axp20x_i2c_probe,
.remove = axp20x_i2c_remove,
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d0e31a2287a..81589d176ae 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -14,6 +14,8 @@
enum {
AXP202_ID = 0,
AXP209_ID,
+ AXP288_ID,
+ NR_AXP20X_VARIANTS,
};
#define AXP20X_DATACACHE(m) (0x04 + (m))
@@ -49,11 +51,13 @@ enum {
#define AXP20X_IRQ3_EN 0x42
#define AXP20X_IRQ4_EN 0x43
#define AXP20X_IRQ5_EN 0x44
+#define AXP20X_IRQ6_EN 0x45
#define AXP20X_IRQ1_STATE 0x48
#define AXP20X_IRQ2_STATE 0x49
#define AXP20X_IRQ3_STATE 0x4a
#define AXP20X_IRQ4_STATE 0x4b
#define AXP20X_IRQ5_STATE 0x4c
+#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
#define AXP20X_ACIN_V_ADC_H 0x56
@@ -116,6 +120,15 @@ enum {
#define AXP20X_CC_CTRL 0xb8
#define AXP20X_FG_RES 0xb9
+/* AXP288 specific registers */
+#define AXP288_PMIC_ADC_H 0x56
+#define AXP288_PMIC_ADC_L 0x57
+#define AXP288_ADC_TS_PIN_CTRL 0x84
+
+#define AXP288_PMIC_ADC_EN 0x84
+#define AXP288_FG_TUNE5 0xed
+
+
/* Regulators IDs */
enum {
AXP20X_LDO1 = 0,
@@ -169,12 +182,58 @@ enum {
AXP20X_IRQ_GPIO0_INPUT,
};
+enum axp288_irqs {
+ AXP288_IRQ_VBUS_FALL = 2,
+ AXP288_IRQ_VBUS_RISE,
+ AXP288_IRQ_OV,
+ AXP288_IRQ_FALLING_ALT,
+ AXP288_IRQ_RISING_ALT,
+ AXP288_IRQ_OV_ALT,
+ AXP288_IRQ_DONE = 10,
+ AXP288_IRQ_CHARGING,
+ AXP288_IRQ_SAFE_QUIT,
+ AXP288_IRQ_SAFE_ENTER,
+ AXP288_IRQ_ABSENT,
+ AXP288_IRQ_APPEND,
+ AXP288_IRQ_QWBTU,
+ AXP288_IRQ_WBTU,
+ AXP288_IRQ_QWBTO,
+ AXP288_IRQ_WBTO,
+ AXP288_IRQ_QCBTU,
+ AXP288_IRQ_CBTU,
+ AXP288_IRQ_QCBTO,
+ AXP288_IRQ_CBTO,
+ AXP288_IRQ_WL2,
+ AXP288_IRQ_WL1,
+ AXP288_IRQ_GPADC,
+ AXP288_IRQ_OT = 31,
+ AXP288_IRQ_GPIO0,
+ AXP288_IRQ_GPIO1,
+ AXP288_IRQ_POKO,
+ AXP288_IRQ_POKL,
+ AXP288_IRQ_POKS,
+ AXP288_IRQ_POKN,
+ AXP288_IRQ_POKP,
+ AXP288_IRQ_TIMER,
+ AXP288_IRQ_MV_CHNG,
+ AXP288_IRQ_BC_USB_CHNG,
+};
+
+#define AXP288_TS_ADC_H 0x58
+#define AXP288_TS_ADC_L 0x59
+#define AXP288_GP_ADC_H 0x5a
+#define AXP288_GP_ADC_L 0x5b
+
struct axp20x_dev {
struct device *dev;
struct i2c_client *i2c_client;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
long variant;
+ int nr_cells;
+ struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
};
#endif /* __LINUX_MFD_AXP20X_H */