summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2008-06-19 17:52:07 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2008-07-21 15:15:59 -0700
commita7707adf9ee8de3c5b67e3793b98888f551ad00d (patch)
tree431137e4c39202f6395f64893966e3bdfa1349d2
parentc1dca562be8ada614ef193aa246c6f8705bcd6b9 (diff)
usb gadget: use new serial core
Teach "gadget serial" to use the new abstracted (and bugfixed) TTY glue, and remove all the orignal tangled-up code. Update the documentation accordingly. This is a net object code shrink and cleanup; it should make it a lot easier to see how the TTY glue should accomodate updates to the TTY layer, be bugfixed, etc. Notable behavior changes include: it can now support getty even when there's no USB connection; it fits properly into the mdev/udev world; and RX handling is better (throttling works, and low latency). Configurations with scripts setting up the /dev/ttygserial device node (with "experimental" major number) may want to change that to be a symlink pointing to the /dev/ttyGS0 file, as a migration aid; else, just switch entirely over to mdev/udev. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--Documentation/usb/gadget_serial.txt35
-rw-r--r--drivers/usb/gadget/Makefile2
-rw-r--r--drivers/usb/gadget/serial.c1392
3 files changed, 103 insertions, 1326 deletions
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 815f5c2301f..9b22bd14c34 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -1,6 +1,7 @@
Linux Gadget Serial Driver v2.0
11/20/2004
+ (updated 8-May-2008 for v2.3)
License and Disclaimer
@@ -31,7 +32,7 @@ Prerequisites
-------------
Versions of the gadget serial driver are available for the
2.4 Linux kernels, but this document assumes you are using
-version 2.0 or later of the gadget serial driver in a 2.6
+version 2.3 or later of the gadget serial driver in a 2.6
Linux kernel.
This document assumes that you are familiar with Linux and
@@ -40,6 +41,12 @@ standard utilities, use minicom and HyperTerminal, and work with
USB and serial devices. It also assumes you configure the Linux
gadget and usb drivers as modules.
+With version 2.3 of the driver, major and minor device nodes are
+no longer statically defined. Your Linux based system should mount
+sysfs in /sys, and use "mdev" (in Busybox) or "udev" to make the
+/dev nodes matching the sysfs /sys/class/tty files.
+
+
Overview
--------
@@ -104,15 +111,8 @@ driver. All this are listed under "USB Gadget Support" when
configuring the kernel. Then rebuild and install the kernel or
modules.
-The gadget serial driver uses major number 127, for now. So you
-will need to create a device node for it, like this:
-
- mknod /dev/ttygserial c 127 0
-
-You only need to do this once.
-
Then you must load the gadget serial driver. To load it as an
-ACM device, do this:
+ACM device (recommended for interoperability), do this:
modprobe g_serial use_acm=1
@@ -125,6 +125,23 @@ controller driver. This must be done each time you reboot the gadget
side Linux system. You can add this to the start up scripts, if
desired.
+Your system should use mdev (from busybox) or udev to make the
+device nodes. After this gadget driver has been set up you should
+then see a /dev/ttyGS0 node:
+
+ # ls -l /dev/ttyGS0 | cat
+ crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0
+ #
+
+Note that the major number (253, above) is system-specific. If
+you need to create /dev nodes by hand, the right numbers to use
+will be in the /sys/class/tty/ttyGS0/dev file.
+
+When you link this gadget driver early, perhaps even statically,
+you may want to set up an /etc/inittab entry to run "getty" on it.
+The /dev/ttyGS0 line should work like most any other serial port.
+
+
If gadget serial is loaded as an ACM device you will want to use
either the Windows or Linux ACM driver on the host side. If gadget
serial is loaded as a bulk in/out device, you will want to use the
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e258afd25fa..16211435761 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_USB_M66592) += m66592-udc.o
#
g_zero-objs := zero.o usbstring.o config.o epautoconf.o
g_ether-objs := ether.o usbstring.o config.o epautoconf.o
-g_serial-objs := serial.o usbstring.o config.o epautoconf.o
+g_serial-objs := serial.o u_serial.o usbstring.o config.o epautoconf.o
g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o
gadgetfs-objs := inode.o
g_file_storage-objs := file_storage.o usbstring.o config.o \
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index fa019fa7333..64ce7e00e98 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1,15 +1,8 @@
/*
- * g_serial.c -- USB gadget serial driver
+ * serial.c -- USB gadget serial driver
*
- * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
- *
- * This code is based in part on the Gadget Zero driver, which
- * is Copyright (C) 2003 by David Brownell, all rights reserved.
- *
- * This code also borrows from usbserial.c, which is
- * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
- * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
*
* This software is distributed under the terms of the GNU General
* Public License ("GPL") as published by the Free Software Foundation,
@@ -22,23 +15,20 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/cdc.h>
-#include <linux/usb/gadget.h>
-
+#include "u_serial.h"
#include "gadget_chips.h"
/* Defines */
-#define GS_VERSION_STR "v2.2"
-#define GS_VERSION_NUM 0x2200
+#define GS_VERSION_STR "v2.3"
+#define GS_VERSION_NUM 0x2300
#define GS_LONG_NAME "Gadget Serial"
#define GS_SHORT_NAME "g_serial"
-#define GS_MAJOR 127
-#define GS_MINOR_START 0
+#define GS_VERSION_NAME GS_LONG_NAME " " GS_VERSION_STR
+
/* REVISIT only one port is supported for now;
* see gs_{send,recv}_packet() ... no multiplexing,
@@ -58,23 +48,8 @@
#define GS_MAX_DESC_LEN 256
-#define GS_DEFAULT_READ_Q_SIZE 32
-#define GS_DEFAULT_WRITE_Q_SIZE 32
-
-#define GS_DEFAULT_WRITE_BUF_SIZE 8192
-#define GS_TMP_BUF_SIZE 8192
-
-#define GS_CLOSE_TIMEOUT 15
-
#define GS_DEFAULT_USE_ACM 0
-/* 9600-8-N-1 ... matches init_termios.c_cflag and defaults
- * expected by "usbser.sys" on MS-Windows.
- */
-#define GS_DEFAULT_DTE_RATE 9600
-#define GS_DEFAULT_DATA_BITS 8
-#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
-#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS
/* maxpacket and other transfer characteristics vary by speed. */
static inline struct usb_endpoint_descriptor *
@@ -87,19 +62,6 @@ choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
}
-/* debug settings */
-#ifdef DEBUG
-static int debug = 1;
-#else
-#define debug 0
-#endif
-
-#define gs_debug(format, arg...) \
- do { if (debug) pr_debug(format, ## arg); } while (0)
-#define gs_debug_level(level, format, arg...) \
- do { if (debug >= level) pr_debug(format, ## arg); } while (0)
-
-
/* Thanks to NetChip Technologies for donating this product ID.
*
* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
@@ -112,63 +74,19 @@ static int debug = 1;
#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
#define GS_NOTIFY_MAXPACKET 8
-
-/* circular buffer */
-struct gs_buf {
- unsigned int buf_size;
- char *buf_buf;
- char *buf_get;
- char *buf_put;
-};
-
-/* the port structure holds info for each port, one for each minor number */
-struct gs_port {
- struct gs_dev *port_dev; /* pointer to device struct */
- struct tty_struct *port_tty; /* pointer to tty struct */
- spinlock_t port_lock;
- int port_num;
- int port_open_count;
- int port_in_use; /* open/close in progress */
- wait_queue_head_t port_write_wait;/* waiting to write */
- struct gs_buf *port_write_buf;
- struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
- u16 port_handshake_bits;
-#define RS232_RTS (1 << 1)
-#define RS232_DTE (1 << 0)
-};
-
/* the device structure holds info for the USB device */
struct gs_dev {
struct usb_gadget *dev_gadget; /* gadget device pointer */
spinlock_t dev_lock; /* lock for set/reset config */
int dev_config; /* configuration number */
- struct usb_ep *dev_notify_ep; /* address of notify endpoint */
- struct usb_ep *dev_in_ep; /* address of in endpoint */
- struct usb_ep *dev_out_ep; /* address of out endpoint */
- struct usb_endpoint_descriptor /* descriptor of notify ep */
- *dev_notify_ep_desc;
- struct usb_endpoint_descriptor /* descriptor of in endpoint */
- *dev_in_ep_desc;
- struct usb_endpoint_descriptor /* descriptor of out endpoint */
- *dev_out_ep_desc;
struct usb_request *dev_ctrl_req; /* control request */
- struct list_head dev_req_list; /* list of write requests */
- int dev_sched_port; /* round robin port scheduled */
- struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */
+
+ struct gserial gser; /* serial/tty port */
};
/* Functions */
-/* tty driver internals */
-static int gs_send(struct gs_dev *dev);
-static int gs_send_packet(struct gs_dev *dev, char *packet,
- unsigned int size);
-static int gs_recv_packet(struct gs_dev *dev, char *packet,
- unsigned int size);
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
-static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
-
/* gadget driver internals */
static int gs_set_config(struct gs_dev *dev, unsigned config);
static void gs_reset_config(struct gs_dev *dev);
@@ -179,28 +97,6 @@ static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
gfp_t kmalloc_flags);
static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
-static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
-static void gs_free_ports(struct gs_dev *dev);
-
-/* circular buffer */
-static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
-static void gs_buf_free(struct gs_buf *gb);
-static void gs_buf_clear(struct gs_buf *gb);
-static unsigned int gs_buf_data_avail(struct gs_buf *gb);
-static unsigned int gs_buf_space_avail(struct gs_buf *gb);
-static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
- unsigned int count);
-static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
- unsigned int count);
-
-
-/* Globals */
-
-static struct gs_dev *gs_device;
-
-static struct mutex gs_open_close_lock[GS_NUM_PORTS];
-
-
/*-------------------------------------------------------------------------*/
/* USB descriptors */
@@ -217,7 +113,7 @@ static struct mutex gs_open_close_lock[GS_NUM_PORTS];
static char manufacturer[50];
static struct usb_string gs_strings[] = {
{ GS_MANUFACTURER_STR_ID, manufacturer },
- { GS_PRODUCT_STR_ID, GS_LONG_NAME },
+ { GS_PRODUCT_STR_ID, GS_VERSION_NAME },
{ GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
{ GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
{ GS_CONTROL_STR_ID, "Gadget Serial Control" },
@@ -436,761 +332,17 @@ static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
/*-------------------------------------------------------------------------*/
/* Module */
-MODULE_DESCRIPTION(GS_LONG_NAME);
+MODULE_DESCRIPTION(GS_VERSION_NAME);
MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-#ifdef DEBUG
-module_param(debug, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
-#endif
-
-static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
-module_param(read_q_size, uint, S_IRUGO);
-MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
-
-static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
-module_param(write_q_size, uint, S_IRUGO);
-MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
-
-static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
-module_param(write_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
-
static unsigned int use_acm = GS_DEFAULT_USE_ACM;
module_param(use_acm, uint, S_IRUGO);
MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
/*-------------------------------------------------------------------------*/
-/* TTY Driver */
-
-/*
- * gs_open
- */
-static int gs_open(struct tty_struct *tty, struct file *file)
-{
- int port_num;
- unsigned long flags;
- struct gs_port *port;
- struct gs_dev *dev;
- struct gs_buf *buf;
- struct mutex *mtx;
- int ret;
-
- port_num = tty->index;
-
- gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
-
- if (port_num < 0 || port_num >= GS_NUM_PORTS) {
- pr_err("gs_open: (%d,%p,%p) invalid port number\n",
- port_num, tty, file);
- return -ENODEV;
- }
-
- dev = gs_device;
-
- if (dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) NULL device pointer\n",
- port_num, tty, file);
- return -ENODEV;
- }
-
- mtx = &gs_open_close_lock[port_num];
- if (mutex_lock_interruptible(mtx)) {
- pr_err("gs_open: (%d,%p,%p) interrupted waiting for mutex\n",
- port_num, tty, file);
- return -ERESTARTSYS;
- }
-
- spin_lock_irqsave(&dev->dev_lock, flags);
-
- if (dev->dev_config == GS_NO_CONFIG_ID) {
- pr_err("gs_open: (%d,%p,%p) device is not connected\n",
- port_num, tty, file);
- ret = -ENODEV;
- goto exit_unlock_dev;
- }
-
- port = dev->dev_port[port_num];
-
- if (port == NULL) {
- pr_err("gs_open: (%d,%p,%p) NULL port pointer\n",
- port_num, tty, file);
- ret = -ENODEV;
- goto exit_unlock_dev;
- }
-
- spin_lock(&port->port_lock);
- spin_unlock(&dev->dev_lock);
-
- if (port->port_dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) port disconnected (1)\n",
- port_num, tty, file);
- ret = -EIO;
- goto exit_unlock_port;
- }
-
- if (port->port_open_count > 0) {
- ++port->port_open_count;
- gs_debug("gs_open: (%d,%p,%p) already open\n",
- port_num, tty, file);
- ret = 0;
- goto exit_unlock_port;
- }
-
- tty->driver_data = NULL;
-
- /* mark port as in use, we can drop port lock and sleep if necessary */
- port->port_in_use = 1;
-
- /* allocate write buffer on first open */
- if (port->port_write_buf == NULL) {
- spin_unlock_irqrestore(&port->port_lock, flags);
- buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
- spin_lock_irqsave(&port->port_lock, flags);
-
- /* might have been disconnected while asleep, check */
- if (port->port_dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) port disconnected (2)\n",
- port_num, tty, file);
- port->port_in_use = 0;
- ret = -EIO;
- goto exit_unlock_port;
- }
-
- if ((port->port_write_buf=buf) == NULL) {
- pr_err("gs_open: (%d,%p,%p) cannot allocate "
- "port write buffer\n",
- port_num, tty, file);
- port->port_in_use = 0;
- ret = -ENOMEM;
- goto exit_unlock_port;
- }
-
- }
-
- /* wait for carrier detect (not implemented) */
-
- /* might have been disconnected while asleep, check */
- if (port->port_dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) port disconnected (3)\n",
- port_num, tty, file);
- port->port_in_use = 0;
- ret = -EIO;
- goto exit_unlock_port;
- }
-
- tty->driver_data = port;
- port->port_tty = tty;
- port->port_open_count = 1;
- port->port_in_use = 0;
-
- gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
-
- ret = 0;
-
-exit_unlock_port:
- spin_unlock_irqrestore(&port->port_lock, flags);
- mutex_unlock(mtx);
- return ret;
-
-exit_unlock_dev:
- spin_unlock_irqrestore(&dev->dev_lock, flags);
- mutex_unlock(mtx);
- return ret;
-
-}
-
-/*
- * gs_close
- */
-
-static int gs_write_finished_event_safely(struct gs_port *p)
-{
- int cond;
-
- spin_lock_irq(&(p)->port_lock);
- cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf);
- spin_unlock_irq(&(p)->port_lock);
- return cond;
-}
-
-static void gs_close(struct tty_struct *tty, struct file *file)
-{
- struct gs_port *port = tty->driver_data;
- struct mutex *mtx;
-
- if (port == NULL) {
- pr_err("gs_close: NULL port pointer\n");
- return;
- }
-
- gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
-
- mtx = &gs_open_close_lock[port->port_num];
- mutex_lock(mtx);
-
- spin_lock_irq(&port->port_lock);
-
- if (port->port_open_count == 0) {
- pr_err("gs_close: (%d,%p,%p) port is already closed\n",
- port->port_num, tty, file);
- goto exit;
- }
-
- if (port->port_open_count > 1) {
- --port->port_open_count;
- goto exit;
- }
-
- /* free disconnected port on final close */
- if (port->port_dev == NULL) {
- kfree(port);
- goto exit;
- }
-
- /* mark port as closed but in use, we can drop port lock */
- /* and sleep if necessary */
- port->port_in_use = 1;
- port->port_open_count = 0;
-
- /* wait for write buffer to drain, or */
- /* at most GS_CLOSE_TIMEOUT seconds */
- if (gs_buf_data_avail(port->port_write_buf) > 0) {
- spin_unlock_irq(&port->port_lock);
- wait_event_interruptible_timeout(port->port_write_wait,
- gs_write_finished_event_safely(port),
- GS_CLOSE_TIMEOUT * HZ);
- spin_lock_irq(&port->port_lock);
- }
-
- /* free disconnected port on final close */
- /* (might have happened during the above sleep) */
- if (port->port_dev == NULL) {
- kfree(port);
- goto exit;
- }
-
- gs_buf_clear(port->port_write_buf);
-
- tty->driver_data = NULL;
- port->port_tty = NULL;
- port->port_in_use = 0;
-
- gs_debug("gs_close: (%d,%p,%p) completed\n",
- port->port_num, tty, file);
-
-exit:
- spin_unlock_irq(&port->port_lock);
- mutex_unlock(mtx);
-}
-
-/*
- * gs_write
- */
-static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
- int ret;
-
- if (port == NULL) {
- pr_err("gs_write: NULL port pointer\n");
- return -EIO;
- }
-
- gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
- count);
-
- if (count == 0)
- return 0;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev == NULL) {
- pr_err("gs_write: (%d,%p) port is not connected\n",
- port->port_num, tty);
- ret = -EIO;
- goto exit;
- }
-
- if (port->port_open_count == 0) {
- pr_err("gs_write: (%d,%p) port is closed\n",
- port->port_num, tty);
- ret = -EBADF;
- goto exit;
- }
-
- count = gs_buf_put(port->port_write_buf, buf, count);
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_send(gs_device);
-
- gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
- count);
-
- return count;
-
-exit:
- spin_unlock_irqrestore(&port->port_lock, flags);
- return ret;
-}
-
-/*
- * gs_put_char
- */
-static int gs_put_char(struct tty_struct *tty, unsigned char ch)
-{
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
- int ret = 0;
-
- if (port == NULL) {
- pr_err("gs_put_char: NULL port pointer\n");
- return 0;
- }
-
- gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
- port->port_num, tty, ch, __builtin_return_address(0));
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev == NULL) {
- pr_err("gs_put_char: (%d,%p) port is not connected\n",
- port->port_num, tty);
- goto exit;
- }
-
- if (port->port_open_count == 0) {
- pr_err("gs_put_char: (%d,%p) port is closed\n",
- port->port_num, tty);
- goto exit;
- }
-
- ret = gs_buf_put(port->port_write_buf, &ch, 1);
-
-exit:
- spin_unlock_irqrestore(&port->port_lock, flags);
- return ret;
-}
-
-/*
- * gs_flush_chars
- */
-static void gs_flush_chars(struct tty_struct *tty)
-{
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
-
- if (port == NULL) {
- pr_err("gs_flush_chars: NULL port pointer\n");
- return;
- }
-
- gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev == NULL) {
- pr_err("gs_flush_chars: (%d,%p) port is not connected\n",
- port->port_num, tty);
- goto exit;
- }
-
- if (port->port_open_count == 0) {
- pr_err("gs_flush_chars: (%d,%p) port is closed\n",
- port->port_num, tty);
- goto exit;
- }
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_send(gs_device);
-
- return;
-
-exit:
- spin_unlock_irqrestore(&port->port_lock, flags);
-}
-
-/*
- * gs_write_room
- */
-static int gs_write_room(struct tty_struct *tty)
-{
-
- int room = 0;
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
-
-
- if (port == NULL)
- return 0;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev != NULL && port->port_open_count > 0
- && port->port_write_buf != NULL)
- room = gs_buf_space_avail(port->port_write_buf);
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_debug("gs_write_room: (%d,%p) room=%d\n",
- port->port_num, tty, room);
-
- return room;
-}
-
-/*
- * gs_chars_in_buffer
- */
-static int gs_chars_in_buffer(struct tty_struct *tty)
-{
- int chars = 0;
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
-
- if (port == NULL)
- return 0;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev != NULL && port->port_open_count > 0
- && port->port_write_buf != NULL)
- chars = gs_buf_data_avail(port->port_write_buf);
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
- port->port_num, tty, chars);
-
- return chars;
-}
-
-/*
- * gs_throttle
- */
-static void gs_throttle(struct tty_struct *tty)
-{
-}
-
-/*
- * gs_unthrottle
- */
-static void gs_unthrottle(struct tty_struct *tty)
-{
-}
-
-/*
- * gs_break
- */
-static void gs_break(struct tty_struct *tty, int break_state)
-{
-}
-
-/*
- * gs_ioctl
- */
-static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct gs_port *port = tty->driver_data;
-
- if (port == NULL) {
- pr_err("gs_ioctl: NULL port pointer\n");
- return -EIO;
- }
-
- gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
- port->port_num, tty, file, cmd, arg);
-
- /* handle ioctls */
-
- /* could not handle ioctl */
- return -ENOIOCTLCMD;
-}
-
-/*
- * gs_set_termios
- */
-static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
-{
-}
-
-static const struct tty_operations gs_tty_ops = {
- .open = gs_open,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .ioctl = gs_ioctl,
- .set_termios = gs_set_termios,
- .throttle = gs_throttle,
- .unthrottle = gs_unthrottle,
- .break_ctl = gs_break,
- .chars_in_buffer = gs_chars_in_buffer,
-};
-
-/*-------------------------------------------------------------------------*/
-
-/*
-* gs_send
-*
-* This function finds available write requests, calls
-* gs_send_packet to fill these packets with data, and
-* continues until either there are no more write requests
-* available or no more data to send. This function is
-* run whenever data arrives or write requests are available.
-*/
-static int gs_send(struct gs_dev *dev)
-{
- int ret,len;
- unsigned long flags;
- struct usb_ep *ep;
- struct usb_request *req;
-
- if (dev == NULL) {
- pr_err("gs_send: NULL device pointer\n");
- return -ENODEV;
- }
-
- spin_lock_irqsave(&dev->dev_lock, flags);
-
- ep = dev->dev_in_ep;
-
- while(!list_empty(&dev->dev_req_list)) {
-
- req = list_entry(dev->dev_req_list.next,
- struct usb_request, list);
-
- len = gs_send_packet(dev, req->buf, ep->maxpacket);
-
- if (len > 0) {
- gs_debug_level(3, "gs_send: len=%d, 0x%2.2x "
- "0x%2.2x 0x%2.2x ...\n", len,
- *((unsigned char *)req->buf),
- *((unsigned char *)req->buf+1),
- *((unsigned char *)req->buf+2));
- list_del(&req->list);
- req->length = len;
- spin_unlock_irqrestore(&dev->dev_lock, flags);
- if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
- pr_err(
- "gs_send: cannot queue read request, ret=%d\n",
- ret);
- spin_lock_irqsave(&dev->dev_lock, flags);
- break;
- }
- spin_lock_irqsave(&dev->dev_lock, flags);
- } else {
- break;
- }
-
- }
-
- spin_unlock_irqrestore(&dev->dev_lock, flags);
-
- return 0;
-}
-
-/*
- * gs_send_packet
- *
- * If there is data to send, a packet is built in the given
- * buffer and the size is returned. If there is no data to
- * send, 0 is returned. If there is any error a negative
- * error number is returned.
- *
- * Called during USB completion routine, on interrupt time.
- *
- * We assume that disconnect will not happen until all completion
- * routines have completed, so we can assume that the dev_port
- * array does not change during the lifetime of this function.
- */
-static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
-{
- unsigned int len;
- struct gs_port *port;
-
- /* TEMPORARY -- only port 0 is supported right now */
- port = dev->dev_port[0];
-
- if (port == NULL) {
- pr_err("gs_send_packet: port=%d, NULL port pointer\n", 0);
- return -EIO;
- }
-
- spin_lock(&port->port_lock);
-
- len = gs_buf_data_avail(port->port_write_buf);
- if (len < size)
- size = len;
-
- if (size == 0)
- goto exit;
-
- size = gs_buf_get(port->port_write_buf, packet, size);
-
- if (port->port_tty)
- wake_up_interruptible(&port->port_tty->write_wait);
-
-exit:
- spin_unlock(&port->port_lock);
- return size;
-}
-
-/*
- * gs_recv_packet
- *
- * Called for each USB packet received. Reads the packet
- * header and stuffs the data in the appropriate tty buffer.
- * Returns 0 if successful, or a negative error number.
- *
- * Called during USB completion routine, on interrupt time.
- *
- * We assume that disconnect will not happen until all completion
- * routines have completed, so we can assume that the dev_port
- * array does not change during the lifetime of this function.
- */
-static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
-{
- unsigned int len;
- struct gs_port *port;
- int ret;
- struct tty_struct *tty;
-
- /* TEMPORARY -- only port 0 is supported right now */
- port = dev->dev_port[0];
-
- if (port == NULL) {
- pr_err("gs_recv_packet: port=%d, NULL port pointer\n",
- port->port_num);
- return -EIO;
- }
-
- spin_lock(&port->port_lock);
-
- if (port->port_open_count == 0) {
- pr_err("gs_recv_packet: port=%d, port is closed\n",
- port->port_num);
- ret = -EIO;
- goto exit;
- }
-
-
- tty = port->port_tty;
-
- if (tty == NULL) {
- pr_err("gs_recv_packet: port=%d, NULL tty pointer\n",
- port->port_num);
- ret = -EIO;
- goto exit;
- }
-
- if (port->port_tty->magic != TTY_MAGIC) {
- pr_err("gs_recv_packet: port=%d, bad tty magic\n",
- port->port_num);
- ret = -EIO;
- goto exit;
- }
-
- len = tty_buffer_request_room(tty, size);
- if (len > 0) {
- tty_insert_flip_string(tty, packet, len);
- tty_flip_buffer_push(port->port_tty);
- wake_up_interruptible(&port->port_tty->read_wait);
- }
- ret = 0;
-exit:
- spin_unlock(&port->port_lock);
- return ret;
-}
-
-/*
-* gs_read_complete
-*/
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
-{
- int ret;
- struct gs_dev *dev = ep->driver_data;
-
- if (dev == NULL) {
- pr_err("gs_read_complete: NULL device pointer\n");
- return;
- }
-
- switch(req->status) {
- case 0:
- /* normal completion */
- gs_recv_packet(dev, req->buf, req->actual);
-requeue:
- req->length = ep->maxpacket;
- if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
- pr_err(
- "gs_read_complete: cannot queue read request, ret=%d\n",
- ret);
- }
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_debug("gs_read_complete: shutdown\n");
- gs_free_req(ep, req);
- break;
-
- default:
- /* unexpected */
- pr_err(
- "gs_read_complete: unexpected status error, status=%d\n",
- req->status);
- goto requeue;
- break;
- }
-}
-
-/*
-* gs_write_complete
-*/
-static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct gs_dev *dev = ep->driver_data;
-
- if (dev == NULL) {
- pr_err("gs_write_complete: NULL device pointer\n");
- return;
- }
-
- switch(req->status) {
- case 0:
- /* normal completion */
-requeue:
- spin_lock(&dev->dev_lock);
- list_add(&req->list, &dev->dev_req_list);
- spin_unlock(&dev->dev_lock);
-
- gs_send(dev);
-
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_debug("gs_write_complete: shutdown\n");
- gs_free_req(ep, req);
- break;
-
- default:
- pr_err(
- "gs_write_complete: unexpected status error, status=%d\n",
- req->status);
- goto requeue;
- break;
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
/* Gadget Driver */
/*
@@ -1199,12 +351,10 @@ requeue:
* Called on module unload. Frees the control request and device
* structure.
*/
-static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
+static void __exit gs_unbind(struct usb_gadget *gadget)
{
struct gs_dev *dev = get_gadget_data(gadget);
- gs_device = NULL;
-
/* read/write requests already freed, only control request remains */
if (dev != NULL) {
if (dev->dev_ctrl_req != NULL) {
@@ -1212,13 +362,13 @@ static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
dev->dev_ctrl_req = NULL;
}
gs_reset_config(dev);
- gs_free_ports(dev);
kfree(dev);
set_gadget_data(gadget, NULL);
}
- pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME,
- GS_VERSION_STR);
+ pr_info("gs_unbind: %s unbound\n", GS_VERSION_NAME);
+
+ gserial_cleanup();
}
/*
@@ -1234,6 +384,10 @@ static int __init gs_bind(struct usb_gadget *gadget)
struct gs_dev *dev;
int gcnum;
+ ret = gserial_setup(gadget, GS_NUM_PORTS);
+ if (ret < 0)
+ return ret;
+
/* Some controllers can't support CDC ACM:
* - sh doesn't support multiple interfaces or configs;
* - sa1100 doesn't have a third interrupt endpoint
@@ -1254,21 +408,24 @@ static int __init gs_bind(struct usb_gadget *gadget)
}
dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
- if (dev == NULL)
- return -ENOMEM;
+ if (dev == NULL) {
+ ret = -ENOMEM;
+ goto autoconf_fail;
+ }
usb_ep_autoconfig_reset(gadget);
+ ret = -ENXIO;
ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
if (!ep)
goto autoconf_fail;
- dev->dev_in_ep = ep;
+ dev->gser.in = ep;
ep->driver_data = dev; /* claim the endpoint */
ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
if (!ep)
goto autoconf_fail;
- dev->dev_out_ep = ep;
+ dev->gser.out = ep;
ep->driver_data = dev; /* claim the endpoint */
if (use_acm) {
@@ -1279,7 +436,7 @@ static int __init gs_bind(struct usb_gadget *gadget)
}
gs_device_desc.idProduct = __constant_cpu_to_le16(
GS_CDC_PRODUCT_ID),
- dev->dev_notify_ep = ep;
+ dev->gser.notify = ep;
ep->driver_data = dev; /* claim the endpoint */
}
@@ -1310,41 +467,32 @@ static int __init gs_bind(struct usb_gadget *gadget)
gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- gs_device = dev;
-
snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
dev->dev_gadget = gadget;
spin_lock_init(&dev->dev_lock);
- INIT_LIST_HEAD(&dev->dev_req_list);
set_gadget_data(gadget, dev);
- if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
- pr_err("gs_bind: cannot allocate ports\n");
- gs_unbind(gadget);
- return ret;
- }
-
/* preallocate control response and buffer */
dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
GFP_KERNEL);
if (dev->dev_ctrl_req == NULL) {
- gs_unbind(gadget);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto autoconf_fail;
}
gadget->ep0->driver_data = dev;
- pr_info("gs_bind: %s %s bound\n",
- GS_LONG_NAME, GS_VERSION_STR);
+ pr_info("gs_bind: %s bound\n", GS_VERSION_NAME);
return 0;
autoconf_fail:
kfree(dev);
- pr_err("gs_bind: cannot autoconfigure on %s\n", gadget->name);
- return -ENODEV;
+ gserial_cleanup();
+ pr_err("gs_bind: to %s, err %d\n", gadget->name, ret);
+ return ret;
}
static int gs_setup_standard(struct usb_gadget *gadget,
@@ -1435,15 +583,14 @@ static int gs_setup_standard(struct usb_gadget *gadget,
}
if (dev->dev_config != GS_BULK_CONFIG_ID
&& wIndex == GS_CONTROL_INTERFACE_ID) {
- if (dev->dev_notify_ep) {
- usb_ep_disable(dev->dev_notify_ep);
- usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
+ if (dev->gser.notify) {
+ usb_ep_disable(dev->gser.notify);
+ usb_ep_enable(dev->gser.notify,
+ dev->gser.notify_desc);
}
} else {
- usb_ep_disable(dev->dev_in_ep);
- usb_ep_disable(dev->dev_out_ep);
- usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
- usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
+ gserial_connect(&dev->gser, 0);
+ gserial_disconnect(&dev->gser);
}
ret = 0;
set_interface_done:
@@ -1480,23 +627,22 @@ static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
struct usb_request *req)
{
struct gs_dev *dev = ep->driver_data;
- struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
switch (req->status) {
case 0:
/* normal completion */
- if (req->actual != sizeof(port->port_line_coding))
+ if (req->actual != sizeof(dev->gser.port_line_coding))
usb_ep_set_halt(ep);
- else if (port) {
+ else {
struct usb_cdc_line_coding *value = req->buf;
/* REVISIT: we currently just remember this data.
* If we change that, (a) validate it first, then
* (b) update whatever hardware needs updating.
*/
- spin_lock(&port->port_lock);
- port->port_line_coding = *value;
- spin_unlock(&port->port_lock);
+ spin_lock(&dev->dev_lock);
+ dev->gser.port_line_coding = *value;
+ spin_unlock(&dev->dev_lock);
}
break;
@@ -1517,7 +663,6 @@ static int gs_setup_class(struct usb_gadget *gadget,
{
int ret = -EOPNOTSUPP;
struct gs_dev *dev = get_gadget_data(gadget);
- struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
struct usb_request *req = dev->dev_ctrl_req;
u16 wIndex = le16_to_cpu(ctrl->wIndex);
u16 wValue = le16_to_cpu(ctrl->wValue);
@@ -1533,26 +678,22 @@ static int gs_setup_class(struct usb_gadget *gadget,
case USB_CDC_REQ_GET_LINE_CODING:
ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
- if (port) {
- spin_lock(&port->port_lock);
- memcpy(req->buf, &port->port_line_coding, ret);
- spin_unlock(&port->port_lock);
- }
+ spin_lock(&dev->dev_lock);
+ memcpy(req->buf, &dev->gser.port_line_coding, ret);
+ spin_unlock(&dev->dev_lock);
break;
case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
if (wLength != 0)
break;
ret = 0;
- if (port) {
- /* REVISIT: we currently just remember this data.
- * If we change that, update whatever hardware needs
- * updating.
- */
- spin_lock(&port->port_lock);
- port->port_handshake_bits = wValue;
- spin_unlock(&port->port_lock);
- }
+ /* REVISIT: we currently just remember this data.
+ * If we change that, update whatever hardware needs
+ * updating.
+ */
+ spin_lock(&dev->dev_lock);
+ dev->gser.port_handshake_bits = wValue;
+ spin_unlock(&dev->dev_lock);
break;
default:
@@ -1654,17 +795,7 @@ static void gs_disconnect(struct usb_gadget *gadget)
struct gs_dev *dev = get_gadget_data(gadget);
spin_lock_irqsave(&dev->dev_lock, flags);
-
gs_reset_config(dev);
-
- /* free closed ports and disconnect open ports */
- /* (open ports will be freed when closed) */
- gs_free_ports(dev);
-
- /* re-allocate ports for the next connection */
- if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
- pr_err("gs_disconnect: cannot re-allocate ports\n");
-
spin_unlock_irqrestore(&dev->dev_lock, flags);
pr_info("gs_disconnect: %s disconnected\n", GS_LONG_NAME);
@@ -1698,17 +829,8 @@ static struct usb_gadget_driver gs_gadget_driver = {
*/
static int gs_set_config(struct gs_dev *dev, unsigned config)
{
- int i;
int ret = 0;
struct usb_gadget *gadget = dev->dev_gadget;
- struct usb_ep *ep;
- struct usb_endpoint_descriptor *out, *in, *notify;
- struct usb_request *req;
-
- if (dev == NULL) {
- pr_err("gs_set_config: NULL device pointer\n");
- return 0;
- }
if (config == dev->dev_config)
return 0;
@@ -1730,85 +852,37 @@ static int gs_set_config(struct gs_dev *dev, unsigned config)
return -EINVAL;
}
- in = choose_ep_desc(gadget,
+ dev->gser.in_desc = choose_ep_desc(gadget,
&gs_highspeed_in_desc,
&gs_fullspeed_in_desc);
- out = choose_ep_desc(gadget,
+ dev->gser.out_desc = choose_ep_desc(gadget,
&gs_highspeed_out_desc,
&gs_fullspeed_out_desc);
- notify = dev->dev_notify_ep
+ dev->gser.notify_desc = dev->gser.notify
? choose_ep_desc(gadget,
&gs_highspeed_notify_desc,
&gs_fullspeed_notify_desc)
: NULL;
- ret = usb_ep_enable(dev->dev_in_ep, in);
- if (ret == 0) {
- dev->dev_in_ep_desc = in;
- } else {
- pr_debug("%s: cannot enable %s %s, ret=%d\n",
- __func__, "IN", dev->dev_in_ep->name, ret);
- return ret;
- }
-
- ret = usb_ep_enable(dev->dev_out_ep, out);
- if (ret == 0) {
- dev->dev_out_ep_desc = out;
- } else {
- pr_debug("%s: cannot enable %s %s, ret=%d\n",
- __func__, "OUT", dev->dev_out_ep->name, ret);
-fail0:
- usb_ep_disable(dev->dev_in_ep);
- return ret;
+ /* only support one "serial" port for now */
+ if (dev->gser.notify) {
+ ret = usb_ep_enable(dev->gser.notify, dev->gser.notify_desc);
+ if (ret < 0)
+ return ret;
+ dev->gser.notify->driver_data = dev;
}
- if (notify) {
- ret = usb_ep_enable(dev->dev_notify_ep, notify);
- if (ret == 0) {
- dev->dev_notify_ep_desc = notify;
- } else {
- pr_debug("%s: cannot enable %s %s, ret=%d\n",
- __func__, "NOTIFY",
- dev->dev_notify_ep->name, ret);
- usb_ep_disable(dev->dev_out_ep);
- goto fail0;
+ ret = gserial_connect(&dev->gser, 0);
+ if (ret < 0) {
+ if (dev->gser.notify) {
+ usb_ep_disable(dev->gser.notify);
+ dev->gser.notify->driver_data = NULL;
}
+ return ret;
}
dev->dev_config = config;
- /* allocate and queue read requests */
- ep = dev->dev_out_ep;
- for (i=0; i<read_q_size && ret == 0; i++) {
- if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
- req->complete = gs_read_complete;
- if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
- pr_err("gs_set_config: cannot queue read "
- "request, ret=%d\n", ret);
- }
- } else {
- pr_err("gs_set_config: cannot allocate "
- "read requests\n");
- ret = -ENOMEM;
- goto exit_reset_config;
- }
- }
-
- /* allocate write requests, and put on free list */
- ep = dev->dev_in_ep;
- for (i=0; i<write_q_size; i++) {
- req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
- if (req) {
- req->complete = gs_write_complete;
- list_add(&req->list, &dev->dev_req_list);
- } else {
- pr_err("gs_set_config: cannot allocate "
- "write requests\n");
- ret = -ENOMEM;
- goto exit_reset_config;
- }
- }
-
/* REVISIT the ACM mode should be able to actually *issue* some
* notifications, for at least serial state change events if
* not also for network connection; say so in bmCapabilities.
@@ -1820,10 +894,6 @@ fail0:
config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
return 0;
-
-exit_reset_config:
- gs_reset_config(dev);
- return ret;
}
/*
@@ -1838,32 +908,16 @@ exit_reset_config:
*/
static void gs_reset_config(struct gs_dev *dev)
{
- struct usb_request *req;
-
- if (dev == NULL) {
- pr_err("gs_reset_config: NULL device pointer\n");
- return;
- }
-
if (dev->dev_config == GS_NO_CONFIG_ID)
return;
dev->dev_config = GS_NO_CONFIG_ID;
- /* free write requests on the free list */
- while(!list_empty(&dev->dev_req_list)) {
- req = list_entry(dev->dev_req_list.next,
- struct usb_request, list);
- list_del(&req->list);
- gs_free_req(dev->dev_in_ep, req);
+ gserial_disconnect(&dev->gser);
+ if (dev->gser.notify) {
+ usb_ep_disable(dev->gser.notify);
+ dev->gser.notify->driver_data = NULL;
}
-
- /* disable endpoints, forcing completion of pending i/o; */
- /* completion handlers free their requests in this case */
- if (dev->dev_notify_ep)
- usb_ep_disable(dev->dev_notify_ep);
- usb_ep_disable(dev->dev_in_ep);
- usb_ep_disable(dev->dev_out_ep);
}
/*
@@ -1956,254 +1010,8 @@ static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
}
}
-/*
- * gs_alloc_ports
- *
- * Allocate all ports and set the gs_dev struct to point to them.
- * Return 0 if successful, or a negative error number.
- *
- * The device lock is normally held when calling this function.
- */
-static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
-{
- int i;
- struct gs_port *port;
-
- if (dev == NULL)
- return -EIO;
-
- for (i=0; i<GS_NUM_PORTS; i++) {
- if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
- return -ENOMEM;
-
- port->port_dev = dev;
- port->port_num = i;
- port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
- port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
- port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
- port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
- spin_lock_init(&port->port_lock);
- init_waitqueue_head(&port->port_write_wait);
-
- dev->dev_port[i] = port;
- }
-
- return 0;
-}
-
-/*
- * gs_free_ports
- *
- * Free all closed ports. Open ports are disconnected by
- * freeing their write buffers, setting their device pointers
- * and the pointers to them in the device to NULL. These
- * ports will be freed when closed.
- *
- * The device lock is normally held when calling this function.
- */
-static void gs_free_ports(struct gs_dev *dev)
-{
- int i;
- unsigned long flags;
- struct gs_port *port;
-
- if (dev == NULL)
- return;
-
- for (i=0; i<GS_NUM_PORTS; i++) {
- if ((port=dev->dev_port[i]) != NULL) {
- dev->dev_port[i] = NULL;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_write_buf != NULL) {
- gs_buf_free(port->port_write_buf);
- port->port_write_buf = NULL;
- }
-
- if (port->port_open_count > 0 || port->port_in_use) {
- port->port_dev = NULL;
- wake_up_interruptible(&port->port_write_wait);
- if (port->port_tty) {
- tty_hangup(port->port_tty);
- }
- spin_unlock_irqrestore(&port->port_lock, flags);
- } else {
- spin_unlock_irqrestore(&port->port_lock, flags);
- kfree(port);
- }
-
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Circular Buffer */
-
-/*
- * gs_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
-{
- struct gs_buf *gb;
-
- if (size == 0)
- return NULL;
-
- gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags);
- if (gb == NULL)
- return NULL;
-
- gb->buf_buf = kmalloc(size, kmalloc_flags);
- if (gb->buf_buf == NULL) {
- kfree(gb);
- return NULL;
- }
-
- gb->buf_size = size;
- gb->buf_get = gb->buf_put = gb->buf_buf;
-
- return gb;
-}
-
-/*
- * gs_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void gs_buf_free(struct gs_buf *gb)
-{
- if (gb) {
- kfree(gb->buf_buf);
- kfree(gb);
- }
-}
-
-/*
- * gs_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void gs_buf_clear(struct gs_buf *gb)
-{
- if (gb != NULL)
- gb->buf_get = gb->buf_put;
- /* equivalent to a get of all data available */
-}
-
-/*
- * gs_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int gs_buf_data_avail(struct gs_buf *gb)
-{
- if (gb != NULL)
- return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
- else
- return 0;
-}
-
-/*
- * gs_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int gs_buf_space_avail(struct gs_buf *gb)
-{
- if (gb != NULL)
- return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
- else
- return 0;
-}
-
-/*
- * gs_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int
-gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
-{
- unsigned int len;
-
- if (gb == NULL)
- return 0;
-
- len = gs_buf_space_avail(gb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = gb->buf_buf + gb->buf_size - gb->buf_put;
- if (count > len) {
- memcpy(gb->buf_put, buf, len);
- memcpy(gb->buf_buf, buf+len, count - len);
- gb->buf_put = gb->buf_buf + count - len;
- } else {
- memcpy(gb->buf_put, buf, count);
- if (count < len)
- gb->buf_put += count;
- else /* count == len */
- gb->buf_put = gb->buf_buf;
- }
-
- return count;
-}
-
-/*
- * gs_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int
-gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
-{
- unsigned int len;
-
- if (gb == NULL)
- return 0;
-
- len = gs_buf_data_avail(gb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = gb->buf_buf + gb->buf_size - gb->buf_get;
- if (count > len) {
- memcpy(buf, gb->buf_get, len);
- memcpy(buf+len, gb->buf_buf, count - len);
- gb->buf_get = gb->buf_buf + count - len;
- } else {
- memcpy(buf, gb->buf_get, count);
- if (count < len)
- gb->buf_get += count;
- else /* count == len */
- gb->buf_get = gb->buf_buf;
- }
-
- return count;
-}
-
/*-------------------------------------------------------------------------*/
-static struct tty_driver *gs_tty_driver;
-
/*
* gs_module_init
*
@@ -2211,50 +1019,7 @@ static struct tty_driver *gs_tty_driver;
*/
static int __init gs_module_init(void)
{
- int i;
- int retval;
-
- retval = usb_gadget_register_driver(&gs_gadget_driver);
- if (retval) {
- pr_err("gs_module_init: cannot register gadget driver, "
- "ret=%d\n", retval);
- return retval;
- }
-
- gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
- if (!gs_tty_driver)
- return -ENOMEM;
- gs_tty_driver->owner = THIS_MODULE;
- gs_tty_driver->driver_name = GS_SHORT_NAME;
- gs_tty_driver->name = "ttygs";
- gs_tty_driver->major = GS_MAJOR;
- gs_tty_driver->minor_start = GS_MINOR_START;
- gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- gs_tty_driver->init_termios = tty_std_termios;
- /* must match GS_DEFAULT_DTE_RATE and friends */
- gs_tty_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- gs_tty_driver->init_termios.c_ispeed = GS_DEFAULT_DTE_RATE;
- gs_tty_driver->init_termios.c_ospeed = GS_DEFAULT_DTE_RATE;
- tty_set_operations(gs_tty_driver, &gs_tty_ops);
-
- for (i = 0; i < GS_NUM_PORTS; i++)
- mutex_init(&gs_open_close_lock[i]);
-
- retval = tty_register_driver(gs_tty_driver);
- if (retval) {
- usb_gadget_unregister_driver(&gs_gadget_driver);
- put_tty_driver(gs_tty_driver);
- pr_err("gs_module_init: cannot register tty driver, "
- "ret=%d\n", retval);
- return retval;
- }
-
- pr_info("gs_module_init: %s %s loaded\n",
- GS_LONG_NAME, GS_VERSION_STR);
- return 0;
+ return usb_gadget_register_driver(&gs_gadget_driver);
}
module_init(gs_module_init);
@@ -2265,11 +1030,6 @@ module_init(gs_module_init);
*/
static void __exit gs_module_exit(void)
{
- tty_unregister_driver(gs_tty_driver);
- put_tty_driver(gs_tty_driver);
usb_gadget_unregister_driver(&gs_gadget_driver);
-
- pr_info("gs_module_exit: %s %s unloaded\n",
- GS_LONG_NAME, GS_VERSION_STR);
}
module_exit(gs_module_exit);