[SCSI] pm80xx: Device id changes to support series 8 controllers.

Updated pci id table with device, vendor, subdevice and subvendor ids
for 8074, 8076, 8077 SAS/SATA 12G controllers. Added 12G related macros.

Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

5 files changed, 63 insertions, 11 deletions

diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 479c5a7a863..4bb304d379d 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -46,7 +46,10 @@ enum chip_flavors {
 	chip_8008,
 	chip_8009,
 	chip_8018,
-	chip_8019
+	chip_8019,
+	chip_8074,
+	chip_8076,
+	chip_8077
 };
 
 enum phy_speed {
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f7c189606b8..93e2d9e9d2b 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -54,6 +54,9 @@ static const struct pm8001_chip_info pm8001_chips[] = {
 	[chip_8009] = {1,  8, &pm8001_80xx_dispatch,},
 	[chip_8018] = {0,  16, &pm8001_80xx_dispatch,},
 	[chip_8019] = {1,  16, &pm8001_80xx_dispatch,},
+	[chip_8074] = {0,  8, &pm8001_80xx_dispatch,},
+	[chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
+	[chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
 };
 static int pm8001_id;
 
@@ -1037,6 +1040,12 @@ static struct pci_device_id pm8001_pci_table[] = {
 	{ PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
 	{ PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
 	{ PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
+	{ PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
+	{ PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
 	{ PCI_VENDOR_ID_ADAPTEC2, 0x8081,
 		PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
 	{ PCI_VENDOR_ID_ADAPTEC2, 0x8081,
@@ -1057,6 +1066,24 @@ static struct pci_device_id pm8001_pci_table[] = {
 		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
 	{ PCI_VENDOR_ID_ADAPTEC2, 0x8089,
 		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+		PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
+	{ PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+		PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
 	{} /* terminate list */
 };
 
@@ -1108,8 +1135,11 @@ module_init(pm8001_init);
 module_exit(pm8001_exit);
 
 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
+MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
+MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
 MODULE_DESCRIPTION(
-		"PMC-Sierra PM8001/8081/8088/8089 SAS/SATA controller driver");
+		"PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
+		"SAS/SATA controller driver");
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 570819464d9..68e1147e3ce 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -104,6 +104,9 @@ do {						\
 
 
 #define DEV_IS_EXPANDER(type)	((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
+#define IS_SPCV_12G(dev)	((dev->device == 0X8074)		\
+				|| (dev->device == 0X8076)		\
+				|| (dev->device == 0X8077))
 
 #define PM8001_NAME_LENGTH		32/* generic length of strings */
 extern struct list_head hba_list;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 9f91030211e..6f836d18f26 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -430,7 +430,11 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
 	table is updated */
 	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE);
 	/* wait until Inbound DoorBell Clear Register toggled */
-	max_wait_count = 2 * 1000 * 1000;/* 2 sec for spcv/ve */
+	if (IS_SPCV_12G(pm8001_ha->pdev)) {
+		max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+	} else {
+		max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+	}
 	do {
 		udelay(1);
 		value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
@@ -913,7 +917,11 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
 	pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET);
 
 	/* wait until Inbound DoorBell Clear Register toggled */
-	max_wait_count = 2 * 1000 * 1000;	/* 2 sec for spcv/ve */
+	if (IS_SPCV_12G(pm8001_ha->pdev)) {
+		max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+	} else {
+		max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+	}
 	do {
 		udelay(1);
 		value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
@@ -3941,9 +3949,16 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
 	 ** [14]	0b disable spin up hold; 1b enable spin up hold
 	 ** [15] ob no change in current PHY analig setup 1b enable using SPAST
 	 */
-	payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
-			LINKMODE_AUTO | LINKRATE_15 |
-			LINKRATE_30 | LINKRATE_60 | phy_id);
+	if (!IS_SPCV_12G(pm8001_ha->pdev))
+		payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+				LINKMODE_AUTO | LINKRATE_15 |
+				LINKRATE_30 | LINKRATE_60 | phy_id);
+	else
+		payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+				LINKMODE_AUTO | LINKRATE_15 |
+				LINKRATE_30 | LINKRATE_60 | LINKRATE_120 |
+				phy_id);
+
 	/* SSC Disable and SAS Analog ST configuration */
 	/**
 	payload.ase_sh_lm_slr_phyid =
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 2b760ba75d7..9a9116d4356 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -168,6 +168,7 @@
 #define LINKRATE_15			(0x01 << 8)
 #define LINKRATE_30			(0x02 << 8)
 #define LINKRATE_60			(0x06 << 8)
+#define LINKRATE_120			(0x08 << 8)
 
 /* Thermal related */
 #define	THERMAL_ENABLE			0x1
@@ -1223,10 +1224,10 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 
 /* MSGU CONFIGURATION TABLE*/
 
-#define SPCv_MSGU_CFG_TABLE_UPDATE		0x01
-#define SPCv_MSGU_CFG_TABLE_RESET		0x02
-#define SPCv_MSGU_CFG_TABLE_FREEZE		0x04
-#define SPCv_MSGU_CFG_TABLE_UNFREEZE		0x08
+#define SPCv_MSGU_CFG_TABLE_UPDATE		0x001
+#define SPCv_MSGU_CFG_TABLE_RESET		0x002
+#define SPCv_MSGU_CFG_TABLE_FREEZE		0x004
+#define SPCv_MSGU_CFG_TABLE_UNFREEZE		0x008
 #define MSGU_IBDB_SET				0x00
 #define MSGU_HOST_INT_STATUS			0x08
 #define MSGU_HOST_INT_MASK			0x0C