Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (lm75) sensor reading bugfix
  hwmon: (abituguru3) update driver detection
  hwmon: (w83791d) new maintainer
  hwmon: (abituguru3) Identify Abit AW8D board as such
  hwmon: Update the sysfs interface documentation
  hwmon: (adt7473) Initialize max_duty_at_overheat before use
  hwmon: (lm85) Fix function RANGE_TO_REG()

6 files changed, 60 insertions, 45 deletions

diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index f4a8ebc1ef1..2d845730d4e 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -2,17 +2,12 @@ Naming and data format standards for sysfs files
 ------------------------------------------------
 
 The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
 
 Note that motherboards vary widely in the connections to sensor chips.
 There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs
 will have to implement conversion, labeling and hiding of inputs. For
 this reason, it is still not recommended to bypass the library.
 
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
 Each chip gets its own directory in the sysfs /sys/devices tree.  To
 find all sensor chips, it is easier to follow the device symlinks from
 /sys/class/hwmon/hwmon*.
 
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
 All sysfs values are fixed point numbers.
 
 There is only one value per file, unlike the older /proc specification.
diff --git a/MAINTAINERS b/MAINTAINERS
index cd587eec9fa..8f0ec46a709 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4431,10 +4431,10 @@ M:	johnpol@2ka.mipt.ru
 S:	Maintained
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Charles Spirakis
-M:	bezaur@gmail.com
+P:	Marc Hulsman
+M:	m.hulsman@tudelft.nl
 L:	lm-sensors@lm-sensors.org
-S:	Odd Fixes
+S:	Maintained
 
 W83793 HARDWARE MONITORING DRIVER
 P:	Rudolf Marek
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ed33fddc4de..f00f497b9ca 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
+#include <linux/dmi.h>
 #include <asm/io.h>
 
 /* uGuru3 bank addresses */
@@ -323,7 +324,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0013, "unknown", {
+	{ 0x0013, "Abit AW8D", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -349,6 +350,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX2 Fan",		36, 2, 60, 1, 0 },
 		{ "AUX3 Fan",		37, 2, 60, 1, 0 },
 		{ "AUX4 Fan",		38, 2, 60, 1, 0 },
+		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
 	{ 0x0014, "Abit AB9 Pro", {
@@ -1111,11 +1113,12 @@ static int __init abituguru3_detect(void)
 {
 	/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
 	   0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
-	   at CMD instead, why is unknown. So we test for 0x05 too. */
+	   or 0x55 at CMD instead, why is unknown. */
 	u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
 	u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
 	if (((data_val == 0x00) || (data_val == 0x08)) &&
-			((cmd_val == 0xAC) || (cmd_val == 0x05)))
+			((cmd_val == 0xAC) || (cmd_val == 0x05) ||
+			 (cmd_val == 0x55)))
 		return ABIT_UGURU3_BASE;
 
 	ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
@@ -1138,6 +1141,15 @@ static int __init abituguru3_init(void)
 	int address, err;
 	struct resource res = { .flags = IORESOURCE_IO };
 
+#ifdef CONFIG_DMI
+	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+
+	/* safety check, refuse to load on non Abit motherboards */
+	if (!force && (!board_vendor ||
+			strcmp(board_vendor, "http://www.abit.com.tw/")))
+		return -ENODEV;
+#endif
+
 	address = abituguru3_detect();
 	if (address < 0)
 		return address;
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index c1009d6f979..93dbf5e7ff8 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -309,6 +309,9 @@ no_sensor_update:
 						ADT7473_REG_PWM_BHVR(i));
 	}
 
+	i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+	data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT);
+
 	data->limits_last_updated = local_jiffies;
 	data->limits_valid = 1;
 
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index fa769690515..de698dc7302 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client)
    the SMBus standard. */
 static int lm75_read_value(struct i2c_client *client, u8 reg)
 {
+	int value;
+
 	if (reg == LM75_REG_CONF)
 		return i2c_smbus_read_byte_data(client, reg);
-	else
-		return swab16(i2c_smbus_read_word_data(client, reg));
+
+	value = i2c_smbus_read_word_data(client, reg);
+	return (value < 0) ? value : swab16(value);
 }
 
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev)
 		int i;
 		dev_dbg(&client->dev, "Starting lm75 update\n");
 
-		for (i = 0; i < ARRAY_SIZE(data->temp); i++)
-			data->temp[i] = lm75_read_value(client,
-							LM75_REG_TEMP[i]);
+		for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+			int status;
+
+			status = lm75_read_value(client, LM75_REG_TEMP[i]);
+			if (status < 0)
+				dev_dbg(&client->dev, "reg %d, err %d\n",
+						LM75_REG_TEMP[i], status);
+			else
+				data->temp[i] = status;
+		}
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 182fe6a5605..ee5eca1c192 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range )
 {
 	int i;
 
-	if ( range < lm85_range_map[0] ) { 
-		return 0 ;
-	} else if ( range > lm85_range_map[15] ) {
+	if (range >= lm85_range_map[15])
 		return 15 ;
-	} else {  /* find closest match */
-		for ( i = 14 ; i >= 0 ; --i ) {
-			if ( range > lm85_range_map[i] ) { /* range bracketed */
-				if ((lm85_range_map[i+1] - range) < 
-					(range - lm85_range_map[i])) {
-					i++;
-					break;
-				}
-				break;
-			}
+
+	/* Find the closest match */
+	for (i = 14; i >= 0; --i) {
+		if (range >= lm85_range_map[i]) {
+			if ((lm85_range_map[i + 1] - range) <
+					(range - lm85_range_map[i]))
+				return i + 1;
+			return i;
 		}
 	}
-	return( i & 0x0f );
+
+	return 0;
 }
 #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])