V4L/DVB: ir-core: Add JVC support to ir-core

This patch adds a JVC decoder to ir-core.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 files changed, 343 insertions, 0 deletions

diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig
index dae5ea11386..e87242af9b3 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/IR/Kconfig
@@ -37,6 +37,15 @@ config IR_RC6_DECODER
 	   Enable this option if you have an infrared remote control which
 	   uses the RC6 protocol, and you need software decoding support.
 
+config IR_JVC_DECODER
+	tristate "Enable IR raw decoder for the JVC protocol"
+	depends on IR_CORE
+	default y
+
+	---help---
+	   Enable this option if you have an infrared remote control which
+	   uses the JVC protocol, and you need software decoding support.
+
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile
index 57b145515d4..937cbdedc7c 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/IR/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_VIDEO_IR) += ir-common.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
 obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
+obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
 
 # stand-alone IR receivers/transmitters
 obj-$(CONFIG_IR_IMON) += imon.o
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index f965024385d..464e392f24c 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -109,4 +109,11 @@ void ir_raw_init(void);
 #define load_rc6_decode()	0
 #endif
 
+/* from ir-jvc-decoder.c */
+#ifdef CONFIG_IR_JVC_DECODER_MODULE
+#define load_jvc_decode()	request_module("ir-jvc-decoder")
+#else
+#define load_jvc_decode()	0
+#endif
+
 #endif /* _IR_RAW_EVENT */
diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/IR/ir-jvc-decoder.c
new file mode 100644
index 00000000000..0b804944cbb
--- /dev/null
+++ b/drivers/media/IR/ir-jvc-decoder.c
@@ -0,0 +1,320 @@
+/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define JVC_NBITS		16		/* dev(8) + func(8) */
+#define JVC_UNIT		525000		/* ns */
+#define JVC_HEADER_PULSE	(16 * JVC_UNIT) /* lack of header -> repeat */
+#define JVC_HEADER_SPACE	(8  * JVC_UNIT)
+#define JVC_BIT_PULSE		(1  * JVC_UNIT)
+#define JVC_BIT_0_SPACE		(1  * JVC_UNIT)
+#define JVC_BIT_1_SPACE		(3  * JVC_UNIT)
+#define JVC_TRAILER_PULSE	(1  * JVC_UNIT)
+#define	JVC_TRAILER_SPACE	(35 * JVC_UNIT)
+
+/* Used to register jvc_decoder clients */
+static LIST_HEAD(decoder_list);
+DEFINE_SPINLOCK(decoder_lock);
+
+enum jvc_state {
+	STATE_INACTIVE,
+	STATE_HEADER_SPACE,
+	STATE_BIT_PULSE,
+	STATE_BIT_SPACE,
+	STATE_TRAILER_PULSE,
+	STATE_TRAILER_SPACE,
+};
+
+struct decoder_data {
+	struct list_head	list;
+	struct ir_input_dev	*ir_dev;
+	int			enabled:1;
+
+	/* State machine control */
+	enum jvc_state		state;
+	u16			jvc_bits;
+	u16			jvc_old_bits;
+	unsigned		count;
+	bool			first;
+	bool			toggle;
+};
+
+
+/**
+ * get_decoder_data()	- gets decoder data
+ * @input_dev:	input device
+ *
+ * Returns the struct decoder_data that corresponds to a device
+ */
+static struct decoder_data *get_decoder_data(struct  ir_input_dev *ir_dev)
+{
+	struct decoder_data *data = NULL;
+
+	spin_lock(&decoder_lock);
+	list_for_each_entry(data, &decoder_list, list) {
+		if (data->ir_dev == ir_dev)
+			break;
+	}
+	spin_unlock(&decoder_lock);
+	return data;
+}
+
+static ssize_t store_enabled(struct device *d,
+			     struct device_attribute *mattr,
+			     const char *buf,
+			     size_t len)
+{
+	unsigned long value;
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	struct decoder_data *data = get_decoder_data(ir_dev);
+
+	if (!data)
+		return -EINVAL;
+
+	if (strict_strtoul(buf, 10, &value) || value > 1)
+		return -EINVAL;
+
+	data->enabled = value;
+
+	return len;
+}
+
+static ssize_t show_enabled(struct device *d,
+			     struct device_attribute *mattr, char *buf)
+{
+	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+	struct decoder_data *data = get_decoder_data(ir_dev);
+
+	if (!data)
+		return -EINVAL;
+
+	if (data->enabled)
+		return sprintf(buf, "1\n");
+	else
+	return sprintf(buf, "0\n");
+}
+
+static DEVICE_ATTR(enabled, S_IRUGO | S_IWUSR, show_enabled, store_enabled);
+
+static struct attribute *decoder_attributes[] = {
+	&dev_attr_enabled.attr,
+	NULL
+};
+
+static struct attribute_group decoder_attribute_group = {
+	.name	= "jvc_decoder",
+	.attrs	= decoder_attributes,
+};
+
+/**
+ * ir_jvc_decode() - Decode one JVC pulse or space
+ * @input_dev:	the struct input_dev descriptor of the device
+ * @duration:   the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+	struct decoder_data *data;
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+	data = get_decoder_data(ir_dev);
+	if (!data)
+		return -EINVAL;
+
+	if (!data->enabled)
+		return 0;
+
+	if (IS_RESET(ev)) {
+		data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2))
+		goto out;
+
+	IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+			break;
+
+		data->count = 0;
+		data->first = true;
+		data->toggle = !data->toggle;
+		data->state = STATE_HEADER_SPACE;
+		return 0;
+
+	case STATE_HEADER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2))
+			break;
+
+		data->state = STATE_BIT_PULSE;
+		return 0;
+
+	case STATE_BIT_PULSE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2))
+			break;
+
+		data->state = STATE_BIT_SPACE;
+		return 0;
+
+	case STATE_BIT_SPACE:
+		if (ev.pulse)
+			break;
+
+		data->jvc_bits <<= 1;
+		if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) {
+			data->jvc_bits |= 1;
+			decrease_duration(&ev, JVC_BIT_1_SPACE);
+		} else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2))
+			decrease_duration(&ev, JVC_BIT_0_SPACE);
+		else
+			break;
+		data->count++;
+
+		if (data->count == JVC_NBITS)
+			data->state = STATE_TRAILER_PULSE;
+		else
+			data->state = STATE_BIT_PULSE;
+		return 0;
+
+	case STATE_TRAILER_PULSE:
+		if (!ev.pulse)
+			break;
+
+		if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2))
+			break;
+
+		data->state = STATE_TRAILER_SPACE;
+		return 0;
+
+	case STATE_TRAILER_SPACE:
+		if (ev.pulse)
+			break;
+
+		if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2))
+			break;
+
+		if (data->first) {
+			u32 scancode;
+			scancode = (bitrev8((data->jvc_bits >> 8) & 0xff) << 8) |
+				   (bitrev8((data->jvc_bits >> 0) & 0xff) << 0);
+			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
+			ir_keydown(input_dev, scancode, data->toggle);
+			data->first = false;
+			data->jvc_old_bits = data->jvc_bits;
+		} else if (data->jvc_bits == data->jvc_old_bits) {
+			IR_dprintk(1, "JVC repeat\n");
+			ir_repeat(input_dev);
+		} else {
+			IR_dprintk(1, "JVC invalid repeat msg\n");
+			break;
+		}
+
+		data->count = 0;
+		data->state = STATE_BIT_PULSE;
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	return -EINVAL;
+}
+
+static int ir_jvc_register(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	struct decoder_data *data;
+	int rc;
+
+	rc = sysfs_create_group(&ir_dev->dev.kobj, &decoder_attribute_group);
+	if (rc < 0)
+		return rc;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
+		return -ENOMEM;
+	}
+
+	data->ir_dev = ir_dev;
+	data->enabled = 1;
+
+	spin_lock(&decoder_lock);
+	list_add_tail(&data->list, &decoder_list);
+	spin_unlock(&decoder_lock);
+
+	return 0;
+}
+
+static int ir_jvc_unregister(struct input_dev *input_dev)
+{
+	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+	static struct decoder_data *data;
+
+	data = get_decoder_data(ir_dev);
+	if (!data)
+		return 0;
+
+	sysfs_remove_group(&ir_dev->dev.kobj, &decoder_attribute_group);
+
+	spin_lock(&decoder_lock);
+	list_del(&data->list);
+	spin_unlock(&decoder_lock);
+
+	return 0;
+}
+
+static struct ir_raw_handler jvc_handler = {
+	.decode		= ir_jvc_decode,
+	.raw_register	= ir_jvc_register,
+	.raw_unregister	= ir_jvc_unregister,
+};
+
+static int __init ir_jvc_decode_init(void)
+{
+	ir_raw_handler_register(&jvc_handler);
+
+	printk(KERN_INFO "IR JVC protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_jvc_decode_exit(void)
+{
+	ir_raw_handler_unregister(&jvc_handler);
+}
+
+module_init(ir_jvc_decode_init);
+module_exit(ir_jvc_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("JVC IR protocol decoder");
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 59f173c45b9..7eef6bf4404 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -233,6 +233,7 @@ static void init_decoders(struct work_struct *work)
 	load_nec_decode();
 	load_rc5_decode();
 	load_rc6_decode();
+	load_jvc_decode();
 
 	/* If needed, we may later add some init code. In this case,
 	   it is needed to change the CONFIG_MODULE test at ir-core.h
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
index ceec980552a..3ec760a9806 100644
--- a/drivers/media/IR/ir-sysfs.c
+++ b/drivers/media/IR/ir-sysfs.c
@@ -63,6 +63,8 @@ static ssize_t show_protocol(struct device *d,
 		s = "nec";
 	else if (ir_type == IR_TYPE_RC6)
 		s = "rc6";
+	else if (ir_type == IR_TYPE_JVC)
+		s = "jvc";
 	else
 		s = "other";
 
@@ -100,6 +102,8 @@ static ssize_t store_protocol(struct device *d,
 			ir_type |= IR_TYPE_PD;
 		if (!strcasecmp(buf, "nec"))
 			ir_type |= IR_TYPE_NEC;
+		if (!strcasecmp(buf, "jvc"))
+			ir_type |= IR_TYPE_JVC;
 	}
 
 	if (!ir_type) {
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 29b7aa3603e..5814ec04555 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -16,6 +16,7 @@
 #define IR_TYPE_PD	(1  << 1)	/* Pulse distance encoded IR */
 #define IR_TYPE_NEC	(1  << 2)
 #define IR_TYPE_RC6	(1  << 3)	/* Philips RC6 protocol */
+#define IR_TYPE_JVC	(1  << 4)	/* JVC protocol */
 #define IR_TYPE_OTHER	(1u << 31)
 
 struct ir_scancode {