Merge tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2014-04-01 16:55:57 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2014-04-01 16:55:57 -0700
commit: cb1595563880a81dab6eab9a5ecb4520d2e76077 (patch)
tree: 042907fc859287a40a454d57c034015742e38cbf
parent: c12e69c6aaf785fd307d05cb6f36ca0e7577ead7 (diff)
parent: 3a13884abea08a5043b98d9374486ec859d1e03a (diff)
43 files changed, 1233 insertions, 847 deletions
diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
index 8e080b893b4..1984bdfbd54 100644
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt
@@ -6,7 +6,7 @@ Required properties:
 - interrupts : Should contain uart interrupt
 
 Optional properties:
-- location : Decides the location of the USART I/O pins.
+- efm32,location : Decides the location of the USART I/O pins.
   Allowed range : [0 .. 5]
   Default: 0
 
@@ -16,5 +16,5 @@ uart@0x4000c400 {
 	compatible = "efm32,uart";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15>;
-	location = <0>;
+	efm32,location = <0>;
 };
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index 6fd1dd1638d..a1d1205d818 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -4,11 +4,24 @@ Required properties:
 - compatible : Should be "fsl,<soc>-lpuart"
 - reg : Address and length of the register set for the device
 - interrupts : Should contain uart interrupt
+- clocks : phandle + clock specifier pairs, one for each entry in clock-names
+- clock-names : should contain: "ipg" - the uart clock
+
+Optional properties:
+- dmas: A list of two dma specifiers, one for each entry in dma-names.
+- dma-names: should contain "tx" and "rx".
+
+Note: Optional properties for DMA support. Write them both or both not.
 
 Example:
 
 uart0: serial@40027000 {
-	       compatible = "fsl,vf610-lpuart";
-	       reg = <0x40027000 0x1000>;
-	       interrupts = <0 61 0x00>;
-       };
+		compatible = "fsl,vf610-lpuart";
+		reg = <0x40027000 0x1000>;
+		interrupts = <0 61 0x00>;
+		clocks = <&clks VF610_CLK_UART0>;
+		clock-names = "ipg";
+		dmas = <&edma0 0 2>,
+			<&edma0 0 3>;
+		dma-names = "rx","tx";
+	};
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
new file mode 100644
index 00000000000..83a919c241b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -0,0 +1,36 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "maxim,max3107" for Maxim MAX3107,
+  - "maxim,max3108" for Maxim MAX3108,
+  - "maxim,max3109" for Maxim MAX3109,
+  - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+  "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+	max14830: max14830@0 {
+		compatible = "maxim,max14830";
+		reg = <0>;
+		clocks = <&clk20m>;
+		clock-names = "osc";
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index f372cf29068..53e6c175db6 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -37,7 +37,7 @@ Example:
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index f8674bcc448..0c81dc945ae 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -217,8 +217,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
-				sirf,uart-dma-rx-channel = <21>;
-				sirf,uart-dma-tx-channel = <2>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
 			};
 
 			uart1: uart@b0060000 {
@@ -228,6 +228,7 @@
 				interrupts = <18>;
 				fifosize = <32>;
 				clocks = <&clks 14>;
+				dma-names = "no-rx", "no-tx";
 			};
 
 			uart2: uart@b0070000 {
@@ -237,8 +238,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
-				sirf,uart-dma-rx-channel = <6>;
-				sirf,uart-dma-tx-channel = <7>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
 			};
 
 			usp0: usp@b0080000 {
@@ -248,8 +249,8 @@
 				interrupts = <20>;
 				fifosize = <128>;
 				clocks = <&clks 28>;
-				sirf,usp-dma-rx-channel = <17>;
-				sirf,usp-dma-tx-channel = <18>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
 			};
 
 			usp1: usp@b0090000 {
@@ -259,8 +260,8 @@
 				interrupts = <21>;
 				fifosize = <128>;
 				clocks = <&clks 29>;
-				sirf,usp-dma-rx-channel = <14>;
-				sirf,usp-dma-tx-channel = <15>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
 			};
 
 			dmac0: dma-controller@b00b0000 {
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 0e219932d7c..8582ae41a58 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -223,8 +223,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
-				sirf,uart-dma-rx-channel = <21>;
-				sirf,uart-dma-tx-channel = <2>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
 			};
 
 			uart1: uart@b0060000 {
@@ -243,8 +243,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
-				sirf,uart-dma-rx-channel = <6>;
-				sirf,uart-dma-tx-channel = <7>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
 			};
 
 			usp0: usp@b0080000 {
@@ -254,8 +254,8 @@
 				interrupts = <20>;
 				fifosize = <128>;
 				clocks = <&clks 28>;
-				sirf,usp-dma-rx-channel = <17>;
-				sirf,usp-dma-tx-channel = <18>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
 			};
 
 			usp1: usp@b0090000 {
@@ -265,8 +265,8 @@
 				interrupts = <21>;
 				fifosize = <128>;
 				clocks = <&clks 29>;
-				sirf,usp-dma-rx-channel = <14>;
-				sirf,usp-dma-tx-channel = <15>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
 			};
 
 			usp2: usp@b00a0000 {
@@ -276,8 +276,8 @@
 				interrupts = <22>;
 				fifosize = <128>;
 				clocks = <&clks 30>;
-				sirf,usp-dma-rx-channel = <10>;
-				sirf,usp-dma-tx-channel = <11>;
+				dmas = <&dmac0 10>, <&dmac0 11>;
+				dma-names = "rx", "tx";
 			};
 
 			dmac0: dma-controller@b00b0000 {
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b3738e616f1..8f45afe785f 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -128,27 +128,15 @@ static struct platform_device mx31moboard_flash = {
 	.num_resources = 1,
 };
 
-static int moboard_uart0_init(struct platform_device *pdev)
+static void __init moboard_uart0_init(void)
 {
-	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	if (ret)
-		return ret;
-
-	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	if (ret)
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) {
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
 		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
-
-	return ret;
-}
-
-static void moboard_uart0_exit(struct platform_device *pdev)
-{
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+	}
 }
 
 static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.init = moboard_uart0_init,
-	.exit = moboard_uart0_exit,
 };
 
 static const struct imxuart_platform_data uart4_pdata __initconst = {
@@ -543,6 +531,7 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_imx2_wdt();
 
+	moboard_uart0_init();
 	imx31_add_imx_uart0(&uart0_pdata);
 	imx31_add_imx_uart4(&uart4_pdata);
 
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 50b46881b6c..94f9e3a3841 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -31,6 +31,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/major.h>
+#include <linux/atomic.h>
 #include <linux/sysrq.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -70,6 +71,9 @@ static struct task_struct *hvc_task;
 /* Picks up late kicks after list walk but before schedule() */
 static int hvc_kicked;
 
+/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */
+static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1);
+
 static int hvc_init(void);
 
 #ifdef CONFIG_MAGIC_SYSRQ
@@ -851,7 +855,7 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
 	int i;
 
 	/* We wait until a driver actually comes along */
-	if (!hvc_driver) {
+	if (atomic_inc_not_zero(&hvc_needs_init)) {
 		int err = hvc_init();
 		if (err)
 			return ERR_PTR(err);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index ebd5bff0f5c..17ee3bf0926 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -176,9 +176,6 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
 				": %d chars not inserted to flip buffer!\n",
 				length - work);
 
-	/*
-	 * This may sleep if ->low_latency is set
-	 */
 	if (work)
 		tty_flip_buffer_push(&tty->port);
 }
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d15624c1b75..41fe8a047d3 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1900,13 +1900,10 @@ static inline int input_available_p(struct tty_struct *tty, int poll)
 	struct n_tty_data *ldata = tty->disc_data;
 	int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
 
-	if (ldata->icanon && !L_EXTPROC(tty)) {
-		if (ldata->canon_head != ldata->read_tail)
-			return 1;
-	} else if (read_cnt(ldata) >= amt)
-		return 1;
-
-	return 0;
+	if (ldata->icanon && !L_EXTPROC(tty))
+		return ldata->canon_head != ldata->read_tail;
+	else
+		return read_cnt(ldata) >= amt;
 }
 
 /**
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 69932b7556c..81f909c2101 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1694,6 +1694,10 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 
 static void serial_unlink_irq_chain(struct uart_8250_port *up)
 {
+	/*
+	 * yes, some broken gcc emit "warning: 'i' may be used uninitialized"
+	 * but no, we are not going to take a patch that assigns NULL below.
+	 */
 	struct irq_info *i;
 	struct hlist_node *n;
 	struct hlist_head *h;
@@ -2882,14 +2886,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
 	touch_nmi_watchdog();
 
-	local_irq_save(flags);
-	if (port->sysrq) {
-		/* serial8250_handle_irq() already took the lock */
-		locked = 0;
-	} else if (oops_in_progress) {
-		locked = spin_trylock(&port->lock);
-	} else
-		spin_lock(&port->lock);
+	if (port->sysrq || oops_in_progress)
+		locked = spin_trylock_irqsave(&port->lock, flags);
+	else
+		spin_lock_irqsave(&port->lock, flags);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -2921,8 +2921,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 		serial8250_modem_status(up);
 
 	if (locked)
-		spin_unlock(&port->lock);
-	local_irq_restore(flags);
+		spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static int __init serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0ff3e3624d4..b14bcba96c2 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1366,23 +1366,44 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
 		struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
-	unsigned int m = 6912;
-	unsigned int n = 15625;
+	unsigned int m, n;
 	u32 reg;
 
-	/* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
-	if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
+	/*
+	 * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+	 * dividers must be adjusted.
+	 *
+	 * uartclk = (m / n) * 100 MHz, where m <= n
+	 */
+	switch (baud) {
+	case 500000:
+	case 1000000:
+	case 2000000:
+	case 4000000:
 		m = 64;
 		n = 100;
-
 		p->uartclk = 64000000;
-	} else if (baud == 3000000) {
+		break;
+	case 3500000:
+		m = 56;
+		n = 100;
+		p->uartclk = 56000000;
+		break;
+	case 1500000:
+	case 3000000:
 		m = 48;
 		n = 100;
-
 		p->uartclk = 48000000;
-	} else {
-		p->uartclk = 44236800;
+		break;
+	case 2500000:
+		m = 40;
+		n = 100;
+		p->uartclk = 40000000;
+		break;
+	default:
+		m = 2304;
+		n = 3125;
+		p->uartclk = 73728000;
 	}
 
 	/* Reset the clock */
@@ -3449,6 +3470,10 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},
+	/*
+	 * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on,
+	 * but is overridden by byt_set_termios.
+	 */
 	[pbn_byt] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a3815eaed42..2577d67bacb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -289,7 +289,7 @@ config SERIAL_MAX3100
 	  MAX3100 chip support
 
 config SERIAL_MAX310X
-	bool "MAX310X support"
+	tristate "MAX310X support"
 	depends on SPI_MASTER
 	select SERIAL_CORE
 	select REGMAP_SPI if SPI_MASTER
@@ -708,7 +708,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST)
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d58783d364e..d4eda24aa68 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2154,9 +2154,19 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	amba_ports[i] = uap;
 
 	amba_set_drvdata(dev, uap);
+
+	if (!amba_reg.state) {
+		ret = uart_register_driver(&amba_reg);
+		if (ret < 0) {
+			pr_err("Failed to register AMBA-PL011 driver\n");
+			return ret;
+		}
+	}
+
 	ret = uart_add_one_port(&amba_reg, &uap->port);
 	if (ret) {
 		amba_ports[i] = NULL;
+		uart_unregister_driver(&amba_reg);
 		pl011_dma_remove(uap);
 	}
  out:
@@ -2175,6 +2185,7 @@ static int pl011_remove(struct amba_device *dev)
 			amba_ports[i] = NULL;
 
 	pl011_dma_remove(uap);
+	uart_unregister_driver(&amba_reg);
 	return 0;
 }
 
@@ -2230,22 +2241,14 @@ static struct amba_driver pl011_driver = {
 
 static int __init pl011_init(void)
 {
-	int ret;
 	printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
 
-	ret = uart_register_driver(&amba_reg);
-	if (ret == 0) {
-		ret = amba_driver_register(&pl011_driver);
-		if (ret)
-			uart_unregister_driver(&amba_reg);
-	}
-	return ret;
+	return amba_driver_register(&pl011_driver);
 }
 
 static void __exit pl011_exit(void)
 {
 	amba_driver_unregister(&pl011_driver);
-	uart_unregister_driver(&amba_reg);
 }
 
 /*
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a49f10d269b..b0603e1f7d8 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -115,9 +115,6 @@ static void atmel_stop_rx(struct uart_port *port);
 #define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
 #define UART_GET_TCR(port)	__raw_readl((port)->membase + ATMEL_PDC_TCR)
 
-static int (*atmel_open_hook)(struct uart_port *);
-static void (*atmel_close_hook)(struct uart_port *);
-
 struct atmel_dma_buffer {
 	unsigned char	*buf;
 	dma_addr_t	dma_addr;
@@ -1555,7 +1552,7 @@ static int atmel_startup(struct uart_port *port)
 	retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
 			tty ? tty->name : "atmel_serial", port);
 	if (retval) {
-		printk("atmel_serial: atmel_startup - Can't get irq\n");
+		dev_err(port->dev, "atmel_startup - Can't get irq\n");
 		return retval;
 	}
 
@@ -1575,17 +1572,6 @@ static int atmel_startup(struct uart_port *port)
 		if (retval < 0)
 			atmel_set_ops(port);
 	}
-	/*
-	 * If there is a specific "open" function (to register
-	 * control line interrupts)
-	 */
-	if (atmel_open_hook) {
-		retval = atmel_open_hook(port);
-		if (retval) {
-			free_irq(port->irq, port);
-			return retval;
-		}
-	}
 
 	/* Save current CSR for comparison in atmel_tasklet_func() */
 	atmel_port->irq_status_prev = UART_GET_CSR(port);
@@ -1684,13 +1670,6 @@ static void atmel_shutdown(struct uart_port *port)
 	 * Free the interrupt
 	 */
 	free_irq(port->irq, port);
-
-	/*
-	 * If there is a specific "close" function (to unregister
-	 * control line interrupts)
-	 */
-	if (atmel_close_hook)
-		atmel_close_hook(port);
 }
 
 /*
@@ -1738,7 +1717,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 		clk_disable_unprepare(atmel_port->clk);
 		break;
 	default:
-		printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+		dev_err(port->dev, "atmel_serial: unknown pm %d\n", state);
 	}
 }
 
@@ -1853,13 +1832,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	mode &= ~ATMEL_US_USMODE;
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
-		dev_dbg(port->dev, "Setting UART to RS485\n");
 		if ((atmel_port->rs485.delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port,
 					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
-	} else {
-		dev_dbg(port->dev, "Setting UART to RS232\n");
 	}
 
 	/* set the parity, stop bits and data size */
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 78e82b017b9..a47421e4627 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -30,6 +30,8 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_bcm63xx.h>
+#include <linux/io.h>
+#include <linux/of.h>
 
 #define BCM63XX_NR_UARTS	2
 
@@ -588,7 +590,7 @@ static int bcm_uart_request_port(struct uart_port *port)
 {
 	unsigned int size;
 
-	size = RSET_UART_SIZE;
+	size = UART_REG_SIZE;
 	if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
 		dev_err(port->dev, "Memory region busy\n");
 		return -EBUSY;
@@ -608,7 +610,7 @@ static int bcm_uart_request_port(struct uart_port *port)
  */
 static void bcm_uart_release_port(struct uart_port *port)
 {
-	release_mem_region(port->mapbase, RSET_UART_SIZE);
+	release_mem_region(port->mapbase, UART_REG_SIZE);
 	iounmap(port->membase);
 }
 
@@ -805,6 +807,9 @@ static int bcm_uart_probe(struct platform_device *pdev)
 	struct clk *clk;
 	int ret;
 
+	if (pdev->dev.of_node)
+		pdev->id = of_alias_get_id(pdev->dev.of_node, "uart");
+
 	if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
 		return -EINVAL;
 
@@ -856,6 +861,12 @@ static int bcm_uart_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id bcm63xx_of_match[] = {
+	{ .compatible = "brcm,bcm6345-uart" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
+
 /*
  * platform driver stuff
  */
@@ -865,6 +876,7 @@ static struct platform_driver bcm_uart_platform_driver = {
 	.driver	= {
 		.owner = THIS_MODULE,
 		.name  = "bcm63xx_uart",
+		.of_match_table = bcm63xx_of_match,
 	},
 };
 
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index b0eacb83f83..5e6fdb1ea73 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -368,11 +368,16 @@ static const struct uart_ops uart_clps711x_ops = {
 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 {
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
-	u32 sysflg = 0;
 
-	do {
+	/* Wait for FIFO is not full */
+	while (1) {
+		u32 sysflg = 0;
+
 		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
-	} while (sysflg & SYSFLG_UTXFF);
+		if (!(sysflg & SYSFLG_UTXFF))
+			break;
+		cond_resched();
+	}
 
 	writew(ch, port->membase + UARTDR_OFFSET);
 }
@@ -382,14 +387,18 @@ static void uart_clps711x_console_write(struct console *co, const char *c,
 {
 	struct uart_port *port = clps711x_uart.state[co->index].uart_port;
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
-	u32 sysflg = 0;
 
 	uart_console_write(port, c, n, uart_clps711x_console_putchar);
 
 	/* Wait for transmitter to become empty */
-	do {
+	while (1) {
+		u32 sysflg = 0;
+
 		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
-	} while (sysflg & SYSFLG_UBUSY);
+		if (!(sysflg & SYSFLG_UBUSY))
+			break;
+		cond_resched();
+	}
 }
 
 static int uart_clps711x_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 690bdea0a0c..d567ac5d3af 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -286,7 +286,6 @@ static struct e100_serial rs_table[] = {
 #endif
 
 },  /* ttyS0 */
-#ifndef CONFIG_SVINTO_SIM
 	{ .baud        = DEF_BAUD,
 	  .ioport        = (unsigned char *)R_SERIAL1_CTRL,
 	  .irq         = 1U << 16, /* uses DMA 8 and 9 */
@@ -447,7 +446,6 @@ static struct e100_serial rs_table[] = {
 	  .dma_in_enabled = 0
 #endif
  }   /* ttyS3 */
-#endif
 };
 
 
@@ -1035,7 +1033,6 @@ cflag_to_etrax_baud(unsigned int cflag)
 static inline void
 e100_dtr(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	unsigned char mask = e100_modem_pins[info->line].dtr_mask;
 
 #ifdef SERIAL_DEBUG_IO
@@ -1060,7 +1057,6 @@ e100_dtr(struct e100_serial *info, int set)
 	       info->line, *e100_modem_pins[info->line].dtr_shadow,
 	       E100_DTR_GET(info));
 #endif
-#endif
 }
 
 /* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
@@ -1069,7 +1065,6 @@ e100_dtr(struct e100_serial *info, int set)
 static inline void
 e100_rts(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	unsigned long flags;
 	local_irq_save(flags);
 	info->rx_ctrl &= ~E100_RTS_MASK;
@@ -1079,7 +1074,6 @@ e100_rts(struct e100_serial *info, int set)
 #ifdef SERIAL_DEBUG_IO
 	printk("ser%i rts %i\n", info->line, set);
 #endif
-#endif
 }
 
 
@@ -1087,7 +1081,6 @@ e100_rts(struct e100_serial *info, int set)
 static inline void
 e100_ri_out(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* RI is active low */
 	{
 		unsigned char mask = e100_modem_pins[info->line].ri_mask;
@@ -1099,12 +1092,10 @@ e100_ri_out(struct e100_serial *info, int set)
 		*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
 		local_irq_restore(flags);
 	}
-#endif
 }
 static inline void
 e100_cd_out(struct e100_serial *info, int set)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* CD is active low */
 	{
 		unsigned char mask = e100_modem_pins[info->line].cd_mask;
@@ -1116,27 +1107,22 @@ e100_cd_out(struct e100_serial *info, int set)
 		*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
 		local_irq_restore(flags);
 	}
-#endif
 }
 
 static inline void
 e100_disable_rx(struct e100_serial *info)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* disable the receiver */
 	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-#endif
 }
 
 static inline void
 e100_enable_rx(struct e100_serial *info)
 {
-#ifndef CONFIG_SVINTO_SIM
 	/* enable the receiver */
 	info->ioport[REG_REC_CTRL] =
 		(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-#endif
 }
 
 /* the rx DMA uses both the dma_descr and the dma_eop interrupts */
@@ -1554,24 +1540,6 @@ transmit_chars_dma(struct e100_serial *info)
 	unsigned int c, sentl;
 	struct etrax_dma_descr *descr;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* This will output too little if tail is not 0 always since
-	 * we don't reloop to send the other part. Anyway this SHOULD be a
-	 * no-op - transmit_chars_dma would never really be called during sim
-	 * since rs_write does not write into the xmit buffer then.
-	 */
-	if (info->xmit.tail)
-		printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
-	if (info->xmit.head != info->xmit.tail) {
-		SIMCOUT(info->xmit.buf + info->xmit.tail,
-			CIRC_CNT(info->xmit.head,
-				 info->xmit.tail,
-				 SERIAL_XMIT_SIZE));
-		info->xmit.head = info->xmit.tail;  /* move back head */
-		info->tr_running = 0;
-	}
-	return;
-#endif
 	/* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
 	*info->oclrintradr =
 		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
@@ -1842,13 +1810,6 @@ static void receive_chars_dma(struct e100_serial *info)
 	struct tty_struct *tty;
 	unsigned char rstat;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	return;
-#endif
-
 	/* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
 	*info->iclrintradr =
 		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
@@ -1934,12 +1895,6 @@ static int start_recv_dma(struct e100_serial *info)
 static void
 start_receive(struct e100_serial *info)
 {
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	return;
-#endif
 	if (info->uses_dma_in) {
 		/* reset the input dma channel to be sure it works */
 
@@ -1972,17 +1927,6 @@ tr_interrupt(int irq, void *dev_id)
 	int i;
 	int handled = 0;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	{
-		const char *s = "What? tr_interrupt in simulator??\n";
-		SIMCOUT(s,strlen(s));
-	}
-	return IRQ_HANDLED;
-#endif
-
 	/* find out the line that caused this irq and get it from rs_table */
 
 	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
@@ -2021,17 +1965,6 @@ rec_interrupt(int irq, void *dev_id)
 	int i;
 	int handled = 0;
 
-#ifdef CONFIG_SVINTO_SIM
-	/* No receive in the simulator.  Will probably be when the rest of
-	 * the serial interface works, and this piece will just be removed.
-	 */
-	{
-		const char *s = "What? rec_interrupt in simulator??\n";
-		SIMCOUT(s,strlen(s));
-	}
-	return IRQ_HANDLED;
-#endif
-
 	/* find out the line that caused this irq and get it from rs_table */
 
 	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
@@ -2173,10 +2106,6 @@ timed_flush_handler(unsigned long ptr)
 	struct e100_serial *info;
 	int i;
 
-#ifdef CONFIG_SVINTO_SIM
-	return;
-#endif
-
 	for (i = 0; i < NR_PORTS; i++) {
 		info = rs_table + i;
 		if (info->uses_dma_in)
@@ -2729,25 +2658,6 @@ startup(struct e100_serial * info)
 	printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
 #endif
 
-#ifdef CONFIG_SVINTO_SIM
-	/* Bits and pieces collected from below.  Better to have them
-	   in one ifdef:ed clause than to mix in a lot of ifdefs,
-	   right? */
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	info->xmit.head = info->xmit.tail = 0;
-	info->first_recv_buffer = info->last_recv_buffer = NULL;
-	info->recv_cnt = info->max_recv_cnt = 0;
-
-	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-		info->rec_descr[i].buf = NULL;
-
-	/* No real action in the simulator, but may set info important
-	   to ioctl. */
-	change_speed(info);
-#else
-
 	/*
 	 * Clear the FIFO buffers and disable them
 	 * (they will be reenabled in change_speed())
@@ -2837,8 +2747,6 @@ startup(struct e100_serial * info)
 	e100_rts(info, 1);
 	e100_dtr(info, 1);
 
-#endif /* CONFIG_SVINTO_SIM */
-
 	info->port.flags |= ASYNC_INITIALIZED;
 
 	local_irq_restore(flags);
@@ -2857,7 +2765,6 @@ shutdown(struct e100_serial * info)
 	struct etrax_recv_buffer *buffer;
 	int i;
 
-#ifndef CONFIG_SVINTO_SIM
 	/* shut down the transmitter and receiver */
 	DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
 	e100_disable_rx(info);
@@ -2882,8 +2789,6 @@ shutdown(struct e100_serial * info)
 		info->tr_running = 0;
 	}
 
-#endif /* CONFIG_SVINTO_SIM */
-
 	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 
@@ -2995,17 +2900,12 @@ change_speed(struct e100_serial *info)
 			IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
 		r_alt_ser_baudrate_shadow &= ~mask;
 		r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-#ifndef CONFIG_SVINTO_SIM
 		*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-#endif /* CONFIG_SVINTO_SIM */
 
 		info->baud = cflag_to_baud(cflag);
-#ifndef CONFIG_SVINTO_SIM
 		info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
-#endif /* CONFIG_SVINTO_SIM */
 	}
 
-#ifndef CONFIG_SVINTO_SIM
 	/* start with default settings and then fill in changes */
 	local_irq_save(flags);
 	/* 8 bit, no/even parity */
@@ -3073,7 +2973,6 @@ change_speed(struct e100_serial *info)
 
 	*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
 	local_irq_restore(flags);
-#endif /* !CONFIG_SVINTO_SIM */
 
 	update_char_time(info);
 
@@ -3122,11 +3021,6 @@ static int rs_raw_write(struct tty_struct *tty,
 		       count, info->ioport[REG_STATUS]);
 #endif
 
-#ifdef CONFIG_SVINTO_SIM
-	/* Really simple.  The output is here and now. */
-	SIMCOUT(buf, count);
-	return count;
-#endif
 	local_save_flags(flags);
 	DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
 	DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3463,7 +3357,6 @@ static int
 get_lsr_info(struct e100_serial * info, unsigned int *value)
 {
 	unsigned int result = TIOCSER_TEMT;
-#ifndef CONFIG_SVINTO_SIM
 	unsigned long curr_time = jiffies;
 	unsigned long curr_time_usec = GET_JIFFIES_USEC();
 	unsigned long elapsed_usec =
@@ -3474,7 +3367,6 @@ get_lsr_info(struct e100_serial * info, unsigned int *value)
 	    elapsed_usec < 2*info->char_time_usec) {
 		result = 0;
 	}
-#endif
 
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
@@ -3804,7 +3696,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
 	e100_disable_serial_data_irq(info);
 #endif
 
-#ifndef CONFIG_SVINTO_SIM
 	e100_disable_rx(info);
 	e100_disable_rx_irq(info);
 
@@ -3816,7 +3707,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
 		 */
 		rs_wait_until_sent(tty, HZ);
 	}
-#endif
 
 	shutdown(info);
 	rs_flush_buffer(tty);
@@ -4479,7 +4369,6 @@ static int __init rs_init(void)
 	fast_timer_init();
 #endif
 
-#ifndef CONFIG_SVINTO_SIM
 #ifndef CONFIG_ETRAX_KGDB
 	/* Not needed in simulator.  May only complicate stuff. */
 	/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
@@ -4489,7 +4378,6 @@ static int __init rs_init(void)
 		panic("%s: Failed to request irq8", __func__);
 
 #endif
-#endif /* CONFIG_SVINTO_SIM */
 
 	return 0;
 }
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 0eb5b5673ed..028582e924a 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -671,7 +671,10 @@ static int efm32_uart_probe_dt(struct platform_device *pdev,
 	if (!np)
 		return 1;
 
-	ret = of_property_read_u32(np, "location", &location);
+	ret = of_property_read_u32(np, "efm32,location", &location);
+	if (ret)
+		/* fall back to old and (wrongly) generic property "location" */
+		ret = of_property_read_u32(np, "location", &location);
 	if (!ret) {
 		if (location > 5) {
 			dev_err(&pdev->dev, "invalid location\n");
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 8978dc9a58b..c5eb897de9d 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -13,14 +13,19 @@
 #define SUPPORT_SYSRQ
 #endif
 
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/clk.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/console.h>
+#include <linux/of_dma.h>
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 #include <linux/tty_flip.h>
 
 /* All registers are 8-bit width */
@@ -112,6 +117,10 @@
 #define UARTSFIFO_TXOF		0x02
 #define UARTSFIFO_RXUF		0x01
 
+#define DMA_MAXBURST		16
+#define DMA_MAXBURST_MASK	(DMA_MAXBURST - 1)
+#define FSL_UART_RX_DMA_BUFFER_SIZE	64
+
 #define DRIVER_NAME	"fsl-lpuart"
 #define DEV_NAME	"ttyLP"
 #define UART_NR		6
@@ -121,6 +130,24 @@ struct lpuart_port {
 	struct clk		*clk;
 	unsigned int		txfifo_size;
 	unsigned int		rxfifo_size;
+
+	bool			lpuart_dma_use;
+	struct dma_chan		*dma_tx_chan;
+	struct dma_chan		*dma_rx_chan;
+	struct dma_async_tx_descriptor  *dma_tx_desc;
+	struct dma_async_tx_descriptor  *dma_rx_desc;
+	dma_addr_t		dma_tx_buf_bus;
+	dma_addr_t		dma_rx_buf_bus;
+	dma_cookie_t		dma_tx_cookie;
+	dma_cookie_t		dma_rx_cookie;
+	unsigned char		*dma_tx_buf_virt;
+	unsigned char		*dma_rx_buf_virt;
+	unsigned int		dma_tx_bytes;
+	unsigned int		dma_rx_bytes;
+	int			dma_tx_in_progress;
+	int			dma_rx_in_progress;
+	unsigned int		dma_rx_timeout;
+	struct timer_list	lpuart_timer;
 };
 
 static struct of_device_id lpuart_dt_ids[] = {
@@ -131,6 +158,10 @@ static struct of_device_id lpuart_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
 
+/* Forward declare this for the dma callbacks*/
+static void lpuart_dma_tx_complete(void *arg);
+static void lpuart_dma_rx_complete(void *arg);
+
 static void lpuart_stop_tx(struct uart_port *port)
 {
 	unsigned char temp;
@@ -152,6 +183,210 @@ static void lpuart_enable_ms(struct uart_port *port)
 {
 }
 
+static void lpuart_copy_rx_to_tty(struct lpuart_port *sport,
+		struct tty_port *tty, int count)
+{
+	int copied;
+
+	sport->port.icount.rx += count;
+
+	if (!tty) {
+		dev_err(sport->port.dev, "No tty port\n");
+		return;
+	}
+
+	dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus,
+			FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+	copied = tty_insert_flip_string(tty,
+			((unsigned char *)(sport->dma_rx_buf_virt)), count);
+
+	if (copied != count) {
+		WARN_ON(1);
+		dev_err(sport->port.dev, "RxData copy to tty layer failed\n");
+	}
+
+	dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
+			FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+}
+
+static void lpuart_pio_tx(struct lpuart_port *sport)
+{
+	struct circ_buf *xmit = &sport->port.state->xmit;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	while (!uart_circ_empty(xmit) &&
+		readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) {
+		writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		sport->port.icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
+	if (uart_circ_empty(xmit))
+		writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
+			sport->port.membase + UARTCR5);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count)
+{
+	struct circ_buf *xmit = &sport->port.state->xmit;
+	dma_addr_t tx_bus_addr;
+
+	dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus,
+				UART_XMIT_SIZE, DMA_TO_DEVICE);
+	sport->dma_tx_bytes = count & ~(DMA_MAXBURST_MASK);
+	tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail;
+	sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan,
+					tx_bus_addr, sport->dma_tx_bytes,
+					DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+
+	if (!sport->dma_tx_desc) {
+		dev_err(sport->port.dev, "Not able to get desc for tx\n");
+		return -EIO;
+	}
+
+	sport->dma_tx_desc->callback = lpuart_dma_tx_complete;
+	sport->dma_tx_desc->callback_param = sport;
+	sport->dma_tx_in_progress = 1;
+	sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
+	dma_async_issue_pending(sport->dma_tx_chan);
+
+	return 0;
+}
+
+static void lpuart_prepare_tx(struct lpuart_port *sport)
+{
+	struct circ_buf *xmit = &sport->port.state->xmit;
+	unsigned long count =  CIRC_CNT_TO_END(xmit->head,
+					xmit->tail, UART_XMIT_SIZE);
+
+	if (!count)
+		return;
+
+	if (count < DMA_MAXBURST)
+		writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS,
+				sport->port.membase + UARTCR5);
+	else {
+		writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS,
+				sport->port.membase + UARTCR5);
+		lpuart_dma_tx(sport, count);
+	}
+}
+
+static void lpuart_dma_tx_complete(void *arg)
+{
+	struct lpuart_port *sport = arg;
+	struct circ_buf *xmit = &sport->port.state->xmit;
+	unsigned long flags;
+
+	async_tx_ack(sport->dma_tx_desc);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1);
+	sport->dma_tx_in_progress = 0;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
+	lpuart_prepare_tx(sport);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int lpuart_dma_rx(struct lpuart_port *sport)
+{
+	dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus,
+			FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+	sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan,
+			sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE,
+			DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+
+	if (!sport->dma_rx_desc) {
+		dev_err(sport->port.dev, "Not able to get desc for rx\n");
+		return -EIO;
+	}
+
+	sport->dma_rx_desc->callback = lpuart_dma_rx_complete;
+	sport->dma_rx_desc->callback_param = sport;
+	sport->dma_rx_in_progress = 1;
+	sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
+	dma_async_issue_pending(sport->dma_rx_chan);
+
+	return 0;
+}
+
+static void lpuart_dma_rx_complete(void *arg)
+{
+	struct lpuart_port *sport = arg;
+	struct tty_port *port = &sport->port.state->port;
+	unsigned long flags;
+
+	async_tx_ack(sport->dma_rx_desc);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	sport->dma_rx_in_progress = 0;
+	lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE);
+	tty_flip_buffer_push(port);
+	lpuart_dma_rx(sport);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static void lpuart_timer_func(unsigned long data)
+{
+	struct lpuart_port *sport = (struct lpuart_port *)data;
+	struct tty_port *port = &sport->port.state->port;
+	struct dma_tx_state state;
+	unsigned long flags;
+	unsigned char temp;
+	int count;
+
+	del_timer(&sport->lpuart_timer);
+	dmaengine_pause(sport->dma_rx_chan);
+	dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state);
+	dmaengine_terminate_all(sport->dma_rx_chan);
+	count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue;
+	async_tx_ack(sport->dma_rx_desc);
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	sport->dma_rx_in_progress = 0;
+	lpuart_copy_rx_to_tty(sport, port, count);
+	tty_flip_buffer_push(port);
+	temp = readb(sport->port.membase + UARTCR5);
+	writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static inline void lpuart_prepare_rx(struct lpuart_port *sport)
+{
+	unsigned long flags;
+	unsigned char temp;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	init_timer(&sport->lpuart_timer);
+	sport->lpuart_timer.function = lpuart_timer_func;
+	sport->lpuart_timer.data = (unsigned long)sport;
+	sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout;
+	add_timer(&sport->lpuart_timer);
+
+	lpuart_dma_rx(sport);
+	temp = readb(sport->port.membase + UARTCR5);
+	writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
 static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
 {
 	struct circ_buf *xmit = &sport->port.state->xmit;
@@ -172,14 +407,21 @@ static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
 
 static void lpuart_start_tx(struct uart_port *port)
 {
-	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+	struct lpuart_port *sport = container_of(port,
+			struct lpuart_port, port);
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned char temp;
 
 	temp = readb(port->membase + UARTCR2);
 	writeb(temp | UARTCR2_TIE, port->membase + UARTCR2);
 
-	if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
-		lpuart_transmit_buffer(sport);
+	if (sport->lpuart_dma_use) {
+		if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress)
+			lpuart_prepare_tx(sport);
+	} else {
+		if (readb(port->membase + UARTSR1) & UARTSR1_TDRE)
+			lpuart_transmit_buffer(sport);
+	}
 }
 
 static irqreturn_t lpuart_txint(int irq, void *dev_id)
@@ -279,12 +521,19 @@ static irqreturn_t lpuart_int(int irq, void *dev_id)
 
 	sts = readb(sport->port.membase + UARTSR1);
 
-	if (sts & UARTSR1_RDRF)
-		lpuart_rxint(irq, dev_id);
-
+	if (sts & UARTSR1_RDRF) {
+		if (sport->lpuart_dma_use)
+			lpuart_prepare_rx(sport);
+		else
+			lpuart_rxint(irq, dev_id);
+	}
 	if (sts & UARTSR1_TDRE &&
-		!(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS))
-		lpuart_txint(irq, dev_id);
+		!(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) {
+		if (sport->lpuart_dma_use)
+			lpuart_pio_tx(sport);
+		else
+			lpuart_txint(irq, dev_id);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -366,13 +615,156 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
 	writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
 			sport->port.membase + UARTCFIFO);
 
-	writeb(2, sport->port.membase + UARTTWFIFO);
+	writeb(0, sport->port.membase + UARTTWFIFO);
 	writeb(1, sport->port.membase + UARTRWFIFO);
 
 	/* Restore cr2 */
 	writeb(cr2_saved, sport->port.membase + UARTCR2);
 }
 
+static int lpuart_dma_tx_request(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port,
+					struct lpuart_port, port);
+	struct dma_chan *tx_chan;
+	struct dma_slave_config dma_tx_sconfig;
+	dma_addr_t dma_bus;
+	unsigned char *dma_buf;
+	int ret;
+
+	tx_chan  = dma_request_slave_channel(sport->port.dev, "tx");
+
+	if (!tx_chan) {
+		dev_err(sport->port.dev, "Dma tx channel request failed!\n");
+		return -ENODEV;
+	}
+
+	dma_bus = dma_map_single(tx_chan->device->dev,
+				sport->port.state->xmit.buf,
+				UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+	if (dma_mapping_error(tx_chan->device->dev, dma_bus)) {
+		dev_err(sport->port.dev, "dma_map_single tx failed\n");
+		dma_release_channel(tx_chan);
+		return -ENOMEM;
+	}
+
+	dma_buf = sport->port.state->xmit.buf;
+	dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
+	dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_tx_sconfig.dst_maxburst = DMA_MAXBURST;
+	dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
+	ret = dmaengine_slave_config(tx_chan, &dma_tx_sconfig);
+
+	if (ret < 0) {
+		dev_err(sport->port.dev,
+				"Dma slave config failed, err = %d\n", ret);
+		dma_release_channel(tx_chan);
+		return ret;
+	}
+
+	sport->dma_tx_chan = tx_chan;
+	sport->dma_tx_buf_virt = dma_buf;
+	sport->dma_tx_buf_bus = dma_bus;
+	sport->dma_tx_in_progress = 0;
+
+	return 0;
+}
+
+static int lpuart_dma_rx_request(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port,
+					struct lpuart_port, port);
+	struct dma_chan *rx_chan;
+	struct dma_slave_config dma_rx_sconfig;
+	dma_addr_t dma_bus;
+	unsigned char *dma_buf;
+	int ret;
+
+	rx_chan  = dma_request_slave_channel(sport->port.dev, "rx");
+
+	if (!rx_chan) {
+		dev_err(sport->port.dev, "Dma rx channel request failed!\n");
+		return -ENODEV;
+	}
+
+	dma_buf = devm_kzalloc(sport->port.dev,
+				FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL);
+
+	if (!dma_buf) {
+		dev_err(sport->port.dev, "Dma rx alloc failed\n");
+		dma_release_channel(rx_chan);
+		return -ENOMEM;
+	}
+
+	dma_bus = dma_map_single(rx_chan->device->dev, dma_buf,
+				FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+	if (dma_mapping_error(rx_chan->device->dev, dma_bus)) {
+		dev_err(sport->port.dev, "dma_map_single rx failed\n");
+		dma_release_channel(rx_chan);
+		return -ENOMEM;
+	}
+
+	dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR;
+	dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_rx_sconfig.src_maxburst = 1;
+	dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
+	ret = dmaengine_slave_config(rx_chan, &dma_rx_sconfig);
+
+	if (ret < 0) {
+		dev_err(sport->port.dev,
+				"Dma slave config failed, err = %d\n", ret);
+		dma_release_channel(rx_chan);
+		return ret;
+	}
+
+	sport->dma_rx_chan = rx_chan;
+	sport->dma_rx_buf_virt = dma_buf;
+	sport->dma_rx_buf_bus = dma_bus;
+	sport->dma_rx_in_progress = 0;
+
+	sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) *
+				FSL_UART_RX_DMA_BUFFER_SIZE * 3 /
+				sport->rxfifo_size / 2;
+
+	if (sport->dma_rx_timeout < msecs_to_jiffies(20))
+		sport->dma_rx_timeout = msecs_to_jiffies(20);
+
+	return 0;
+}
+
+static void lpuart_dma_tx_free(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port,
+					struct lpuart_port, port);
+	struct dma_chan *dma_chan;
+
+	dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus,
+			UART_XMIT_SIZE, DMA_TO_DEVICE);
+	dma_chan = sport->dma_tx_chan;
+	sport->dma_tx_chan = NULL;
+	sport->dma_tx_buf_bus = 0;
+	sport->dma_tx_buf_virt = NULL;
+	dma_release_channel(dma_chan);
+}
+
+static void lpuart_dma_rx_free(struct uart_port *port)
+{
+	struct lpuart_port *sport = container_of(port,
+					struct lpuart_port, port);
+	struct dma_chan *dma_chan;
+
+	dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus,
+			FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+	dma_chan = sport->dma_rx_chan;
+	sport->dma_rx_chan = NULL;
+	sport->dma_rx_buf_bus = 0;
+	sport->dma_rx_buf_virt = NULL;
+	dma_release_channel(dma_chan);
+}
+
 static int lpuart_startup(struct uart_port *port)
 {
 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
@@ -380,6 +772,15 @@ static int lpuart_startup(struct uart_port *port)
 	unsigned long flags;
 	unsigned char temp;
 
+	/*whether use dma support by dma request results*/
+	if (lpuart_dma_tx_request(port) || lpuart_dma_rx_request(port)) {
+		sport->lpuart_dma_use = false;
+	} else {
+		sport->lpuart_dma_use = true;
+		temp = readb(port->membase + UARTCR5);
+		writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5);
+	}
+
 	ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
 				DRIVER_NAME, sport);
 	if (ret)
@@ -414,6 +815,11 @@ static void lpuart_shutdown(struct uart_port *port)
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	devm_free_irq(port->dev, port->irq, sport);
+
+	if (sport->lpuart_dma_use) {
+		lpuart_dma_tx_free(port);
+		lpuart_dma_rx_free(port);
+	}
 }
 
 static void
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d799140e53b..3b6c1a2e25d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -496,8 +496,7 @@ static void dma_tx_callback(void *data)
 
 	dev_dbg(sport->port.dev, "we finish the TX DMA.\n");
 
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&sport->port);
+	uart_write_wakeup(&sport->port);
 
 	if (waitqueue_active(&sport->dma_wait)) {
 		wake_up(&sport->dma_wait);
@@ -1117,25 +1116,25 @@ static int imx_startup(struct uart_port *port)
 	 */
 	if (sport->txirq > 0) {
 		retval = request_irq(sport->rxirq, imx_rxint, 0,
-				DRIVER_NAME, sport);
+				     dev_name(port->dev), sport);
 		if (retval)
 			goto error_out1;
 
 		retval = request_irq(sport->txirq, imx_txint, 0,
-				DRIVER_NAME, sport);
+				     dev_name(port->dev), sport);
 		if (retval)
 			goto error_out2;
 
 		/* do not use RTS IRQ on IrDA */
 		if (!USE_IRDA(sport)) {
 			retval = request_irq(sport->rtsirq, imx_rtsint, 0,
-					DRIVER_NAME, sport);
+					     dev_name(port->dev), sport);
 			if (retval)
 				goto error_out3;
 		}
 	} else {
 		retval = request_irq(sport->port.irq, imx_int, 0,
-				DRIVER_NAME, sport);
+				     dev_name(port->dev), sport);
 		if (retval) {
 			free_irq(sport->port.irq, sport);
 			goto error_out1;
@@ -1470,44 +1469,13 @@ static const char *imx_type(struct uart_port *port)
 }
 
 /*
- * Release the memory region(s) being used by 'port'.
- */
-static void imx_release_port(struct uart_port *port)
-{
-	struct platform_device *pdev = to_platform_device(port->dev);
-	struct resource *mmres;
-
-	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mmres->start, resource_size(mmres));
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int imx_request_port(struct uart_port *port)
-{
-	struct platform_device *pdev = to_platform_device(port->dev);
-	struct resource *mmres;
-	void *ret;
-
-	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mmres)
-		return -ENODEV;
-
-	ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart");
-
-	return  ret ? 0 : -EBUSY;
-}
-
-/*
  * Configure/autoconfigure the port.
  */
 static void imx_config_port(struct uart_port *port, int flags)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 
-	if (flags & UART_CONFIG_TYPE &&
-	    imx_request_port(&sport->port) == 0)
+	if (flags & UART_CONFIG_TYPE)
 		sport->port.type = PORT_IMX;
 }
 
@@ -1617,8 +1585,6 @@ static struct uart_ops imx_pops = {
 	.flush_buffer	= imx_flush_buffer,
 	.set_termios	= imx_set_termios,
 	.type		= imx_type,
-	.release_port	= imx_release_port,
-	.request_port	= imx_request_port,
 	.config_port	= imx_config_port,
 	.verify_port	= imx_verify_port,
 #if defined(CONFIG_CONSOLE_POLL)
@@ -1935,7 +1901,6 @@ static void serial_imx_probe_pdata(struct imx_port *sport,
 static int serial_imx_probe(struct platform_device *pdev)
 {
 	struct imx_port *sport;
-	struct imxuart_platform_data *pdata;
 	void __iomem *base;
 	int ret = 0;
 	struct resource *res;
@@ -1951,12 +1916,9 @@ static int serial_imx_probe(struct platform_device *pdev)
 		return ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	base = devm_ioremap(&pdev->dev, res->start, PAGE_SIZE);
-	if (!base)
-		return -ENOMEM;
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	sport->port.dev = &pdev->dev;
 	sport->port.mapbase = res->start;
@@ -1992,38 +1954,16 @@ static int serial_imx_probe(struct platform_device *pdev)
 
 	imx_ports[sport->port.line] = sport;
 
-	pdata = dev_get_platdata(&pdev->dev);
-	if (pdata && pdata->init) {
-		ret = pdata->init(pdev);
-		if (ret)
-			return ret;
-	}
-
-	ret = uart_add_one_port(&imx_reg, &sport->port);
-	if (ret)
-		goto deinit;
 	platform_set_drvdata(pdev, sport);
 
-	return 0;
-deinit:
-	if (pdata && pdata->exit)
-		pdata->exit(pdev);
-	return ret;
+	return uart_add_one_port(&imx_reg, &sport->port);
 }
 
 static int serial_imx_remove(struct platform_device *pdev)
 {
-	struct imxuart_platform_data *pdata;
 	struct imx_port *sport = platform_get_drvdata(pdev);
 
-	pdata = dev_get_platdata(&pdev->dev);
-
-	uart_remove_one_port(&imx_reg, &sport->port);
-
-	if (pdata && pdata->exit)
-		pdata->exit(pdev);
-
-	return 0;
+	return uart_remove_one_port(&imx_reg, &sport->port);
 }
 
 static struct platform_driver serial_imx_driver = {
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 8d71e4047bb..2a99d0c61b9 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1,7 +1,7 @@
 /*
  *  Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver
  *
- *  Copyright (C) 2012-2013 Alexander Shiyan <shc_work@mail.ru>
+ *  Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru>
  *
  *  Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
  *  Based on max3110.c, by Feng Tang <feng.tang@intel.com>
@@ -13,19 +13,21 @@
  *  (at your option) any later version.
  */
 
-#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
-#include <linux/regmap.h>
-#include <linux/gpio.h>
 #include <linux/spi/spi.h>
-
-#include <linux/platform_data/max310x.h>
+#include <linux/uaccess.h>
 
 #define MAX310X_NAME			"max310x"
 #define MAX310X_MAJOR			204
@@ -161,10 +163,6 @@
 /* IRDA register bits */
 #define MAX310X_IRDA_IRDAEN_BIT		(1 << 0) /* IRDA mode enable */
 #define MAX310X_IRDA_SIR_BIT		(1 << 1) /* SIR mode enable */
-#define MAX310X_IRDA_SHORTIR_BIT	(1 << 2) /* Short SIR mode enable */
-#define MAX310X_IRDA_MIR_BIT		(1 << 3) /* MIR mode enable */
-#define MAX310X_IRDA_RXINV_BIT		(1 << 4) /* RX logic inversion enable */
-#define MAX310X_IRDA_TXINV_BIT		(1 << 5) /* TX logic inversion enable */
 
 /* Flow control trigger level register masks */
 #define MAX310X_FLOWLVL_HALT_MASK	(0x000f) /* Flow control halt level */
@@ -220,26 +218,6 @@
 						  *       XOFF2
 						  */
 
-/* GPIO configuration register bits */
-#define MAX310X_GPIOCFG_GP0OUT_BIT	(1 << 0) /* GPIO 0 output enable */
-#define MAX310X_GPIOCFG_GP1OUT_BIT	(1 << 1) /* GPIO 1 output enable */
-#define MAX310X_GPIOCFG_GP2OUT_BIT	(1 << 2) /* GPIO 2 output enable */
-#define MAX310X_GPIOCFG_GP3OUT_BIT	(1 << 3) /* GPIO 3 output enable */
-#define MAX310X_GPIOCFG_GP0OD_BIT	(1 << 4) /* GPIO 0 open-drain enable */
-#define MAX310X_GPIOCFG_GP1OD_BIT	(1 << 5) /* GPIO 1 open-drain enable */
-#define MAX310X_GPIOCFG_GP2OD_BIT	(1 << 6) /* GPIO 2 open-drain enable */
-#define MAX310X_GPIOCFG_GP3OD_BIT	(1 << 7) /* GPIO 3 open-drain enable */
-
-/* GPIO DATA register bits */
-#define MAX310X_GPIODATA_GP0OUT_BIT	(1 << 0) /* GPIO 0 output value */
-#define MAX310X_GPIODATA_GP1OUT_BIT	(1 << 1) /* GPIO 1 output value */
-#define MAX310X_GPIODATA_GP2OUT_BIT	(1 << 2) /* GPIO 2 output value */
-#define MAX310X_GPIODATA_GP3OUT_BIT	(1 << 3) /* GPIO 3 output value */
-#define MAX310X_GPIODATA_GP0IN_BIT	(1 << 4) /* GPIO 0 input value */
-#define MAX310X_GPIODATA_GP1IN_BIT	(1 << 5) /* GPIO 1 input value */
-#define MAX310X_GPIODATA_GP2IN_BIT	(1 << 6) /* GPIO 2 input value */
-#define MAX310X_GPIODATA_GP3IN_BIT	(1 << 7) /* GPIO 3 input value */
-
 /* PLL configuration register masks */
 #define MAX310X_PLLCFG_PREDIV_MASK	(0x3f) /* PLL predivision value */
 #define MAX310X_PLLCFG_PLLFACTOR_MASK	(0xc0) /* PLL multiplication factor */
@@ -283,16 +261,15 @@ struct max310x_devtype {
 struct max310x_one {
 	struct uart_port	port;
 	struct work_struct	tx_work;
+	struct work_struct	md_work;
 };
 
 struct max310x_port {
 	struct uart_driver	uart;
 	struct max310x_devtype	*devtype;
 	struct regmap		*regmap;
-	struct regmap_config	regcfg;
 	struct mutex		mutex;
-	struct max310x_pdata	*pdata;
-	int			gpio_used;
+	struct clk		*clk;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip	gpio;
 #endif
@@ -504,25 +481,33 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg)
 	return false;
 }
 
-static void max310x_set_baud(struct uart_port *port, int baud)
+static int max310x_set_baud(struct uart_port *port, int baud)
 {
-	unsigned int mode = 0, div = port->uartclk / baud;
+	unsigned int mode = 0, clk = port->uartclk, div = clk / baud;
 
-	if (!(div / 16)) {
+	/* Check for minimal value for divider */
+	if (div < 16)
+		div = 16;
+
+	if (clk % baud && (div / 16) < 0x8000) {
 		/* Mode x2 */
 		mode = MAX310X_BRGCFG_2XMODE_BIT;
-		div = (port->uartclk * 2) / baud;
-	}
-
-	if (!(div / 16)) {
-		/* Mode x4 */
-		mode = MAX310X_BRGCFG_4XMODE_BIT;
-		div = (port->uartclk * 4) / baud;
+		clk = port->uartclk * 2;
+		div = clk / baud;
+
+		if (clk % baud && (div / 16) < 0x8000) {
+			/* Mode x4 */
+			mode = MAX310X_BRGCFG_4XMODE_BIT;
+			clk = port->uartclk * 4;
+			div = clk / baud;
+		}
 	}
 
 	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8);
 	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16);
 	max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode);
+
+	return DIV_ROUND_CLOSEST(clk, div);
 }
 
 static int max310x_update_best_err(unsigned long f, long *besterr)
@@ -538,18 +523,19 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
 	return 1;
 }
 
-static int max310x_set_ref_clk(struct max310x_port *s)
+static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
+			       bool xtal)
 {
 	unsigned int div, clksrc, pllcfg = 0;
 	long besterr = -1;
-	unsigned long fdiv, fmul, bestfreq = s->pdata->frequency;
+	unsigned long fdiv, fmul, bestfreq = freq;
 
 	/* First, update error without PLL */
-	max310x_update_best_err(s->pdata->frequency, &besterr);
+	max310x_update_best_err(freq, &besterr);
 
 	/* Try all possible PLL dividers */
 	for (div = 1; (div <= 63) && besterr; div++) {
-		fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div);
+		fdiv = DIV_ROUND_CLOSEST(freq, div);
 
 		/* Try multiplier 6 */
 		fmul = fdiv * 6;
@@ -582,10 +568,7 @@ static int max310x_set_ref_clk(struct max310x_port *s)
 	}
 
 	/* Configure clock source */
-	if (s->pdata->driver_flags & MAX310X_EXT_CLK)
-		clksrc = MAX310X_CLKSRC_EXTCLK_BIT;
-	else
-		clksrc = MAX310X_CLKSRC_CRYST_BIT;
+	clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
 
 	/* Configure PLL */
 	if (pllcfg) {
@@ -597,7 +580,7 @@ static int max310x_set_ref_clk(struct max310x_port *s)
 	regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
 
 	/* Wait for crystal */
-	if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK))
+	if (pllcfg && xtal)
 		msleep(10);
 
 	return (int)bestfreq;
@@ -782,11 +765,21 @@ static unsigned int max310x_get_mctrl(struct uart_port *port)
 	return TIOCM_DSR | TIOCM_CAR;
 }
 
+static void max310x_md_proc(struct work_struct *ws)
+{
+	struct max310x_one *one = container_of(ws, struct max310x_one, md_work);
+
+	max310x_port_update(&one->port, MAX310X_MODE2_REG,
+			    MAX310X_MODE2_LOOPBACK_BIT,
+			    (one->port.mctrl & TIOCM_LOOP) ?
+			    MAX310X_MODE2_LOOPBACK_BIT : 0);
+}
+
 static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* DCD and DSR are not wired and CTS/RTS is hadnled automatically
-	 * so do nothing
-	 */
+	struct max310x_one *one = container_of(port, struct max310x_one, port);
+
+	schedule_work(&one->md_work);
 }
 
 static void max310x_break_ctl(struct uart_port *port, int break_state)
@@ -875,40 +868,76 @@ static void max310x_set_termios(struct uart_port *port,
 				  port->uartclk / 4);
 
 	/* Setup baudrate generator */
-	max310x_set_baud(port, baud);
+	baud = max310x_set_baud(port, baud);
 
 	/* Update timeout according to new baud rate */
 	uart_update_timeout(port, termios->c_cflag, baud);
 }
 
+static int max310x_ioctl(struct uart_port *port, unsigned int cmd,
+			 unsigned long arg)
+{
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+	struct serial_rs485 rs485;
+	unsigned int val;
+
+	switch (cmd) {
+	case TIOCSRS485:
+		if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485)))
+			return -EFAULT;
+		if (rs485.delay_rts_before_send > 0x0f ||
+		    rs485.delay_rts_after_send > 0x0f)
+			return -ERANGE;
+		val = (rs485.delay_rts_before_send << 4) |
+		      rs485.delay_rts_after_send;
+		max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val);
+		if (rs485.flags & SER_RS485_ENABLED) {
+			max310x_port_update(port, MAX310X_MODE1_REG,
+					    MAX310X_MODE1_TRNSCVCTRL_BIT,
+					    MAX310X_MODE1_TRNSCVCTRL_BIT);
+			max310x_port_update(port, MAX310X_MODE2_REG,
+					    MAX310X_MODE2_ECHOSUPR_BIT,
+					    MAX310X_MODE2_ECHOSUPR_BIT);
+		} else {
+			max310x_port_update(port, MAX310X_MODE1_REG,
+					    MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
+			max310x_port_update(port, MAX310X_MODE2_REG,
+					    MAX310X_MODE2_ECHOSUPR_BIT, 0);
+		}
+		return 0;
+	case TIOCGRS485:
+		memset(&rs485, 0, sizeof(rs485));
+		val = max310x_port_read(port, MAX310X_MODE1_REG);
+		rs485.flags = (val & MAX310X_MODE1_TRNSCVCTRL_BIT) ?
+			      SER_RS485_ENABLED : 0;
+		rs485.flags |= SER_RS485_RTS_ON_SEND;
+		val = max310x_port_read(port, MAX310X_HDPIXDELAY_REG);
+		rs485.delay_rts_before_send = val >> 4;
+		rs485.delay_rts_after_send = val & 0x0f;
+		if (copy_to_user((void __user *)arg, &rs485, sizeof(rs485)))
+			return -EFAULT;
+		return 0;
+	default:
+		break;
+	}
+#endif
+
+	return -ENOIOCTLCMD;
+}
+
 static int max310x_startup(struct uart_port *port)
 {
-	unsigned int val, line = port->line;
 	struct max310x_port *s = dev_get_drvdata(port->dev);
+	unsigned int val;
 
 	s->devtype->power(port, 1);
 
-	/* Configure baud rate, 9600 as default */
-	max310x_set_baud(port, 9600);
-
-	/* Configure LCR register, 8N1 mode by default */
-	max310x_port_write(port, MAX310X_LCR_REG, MAX310X_LCR_WORD_LEN_8);
-
 	/* Configure MODE1 register */
 	max310x_port_update(port, MAX310X_MODE1_REG,
-			    MAX310X_MODE1_TRNSCVCTRL_BIT,
-			    (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL)
-			    ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0);
-
-	/* Configure MODE2 register */
-	val = MAX310X_MODE2_RXEMPTINV_BIT;
-	if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK)
-		val |= MAX310X_MODE2_LOOPBACK_BIT;
-	if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS)
-		val |= MAX310X_MODE2_ECHOSUPR_BIT;
-
-	/* Reset FIFOs */
-	val |= MAX310X_MODE2_FIFORST_BIT;
+			    MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
+
+	/* Configure MODE2 register & Reset FIFOs*/
+	val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
 	max310x_port_write(port, MAX310X_MODE2_REG, val);
 	max310x_port_update(port, MAX310X_MODE2_REG,
 			    MAX310X_MODE2_FIFORST_BIT, 0);
@@ -989,6 +1018,7 @@ static const struct uart_ops max310x_ops = {
 	.release_port	= max310x_null_void,
 	.config_port	= max310x_config_port,
 	.verify_port	= max310x_verify_port,
+	.ioctl		= max310x_ioctl,
 };
 
 static int __maybe_unused max310x_suspend(struct device *dev)
@@ -1017,6 +1047,8 @@ static int __maybe_unused max310x_resume(struct device *dev)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
+
 #ifdef CONFIG_GPIOLIB
 static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -1063,23 +1095,16 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip,
 }
 #endif
 
-static int max310x_probe(struct device *dev, int is_spi,
-			 struct max310x_devtype *devtype, int irq)
+static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
+			 struct regmap *regmap, int irq, unsigned long flags)
 {
+	int i, ret, fmin, fmax, freq, uartclk;
+	struct clk *clk_osc, *clk_xtal;
 	struct max310x_port *s;
-	struct max310x_pdata *pdata = dev_get_platdata(dev);
-	int i, ret, uartclk;
-
-	/* Check for IRQ */
-	if (irq <= 0) {
-		dev_err(dev, "No IRQ specified\n");
-		return -ENOTSUPP;
-	}
+	bool xtal = false;
 
-	if (!pdata) {
-		dev_err(dev, "No platform data supplied\n");
-		return -EINVAL;
-	}
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
 
 	/* Alloc port structure */
 	s = devm_kzalloc(dev, sizeof(*s) +
@@ -1089,52 +1114,44 @@ static int max310x_probe(struct device *dev, int is_spi,
 		return -ENOMEM;
 	}
 
-	/* Check input frequency */
-	if ((pdata->driver_flags & MAX310X_EXT_CLK) &&
-	   ((pdata->frequency < 500000) || (pdata->frequency > 35000000)))
-		goto err_freq;
-	/* Check frequency for quartz */
-	if (!(pdata->driver_flags & MAX310X_EXT_CLK) &&
-	   ((pdata->frequency < 1000000) || (pdata->frequency > 4000000)))
-		goto err_freq;
-
-	s->pdata = pdata;
-	s->devtype = devtype;
-	dev_set_drvdata(dev, s);
-
-	mutex_init(&s->mutex);
+	clk_osc = devm_clk_get(dev, "osc");
+	clk_xtal = devm_clk_get(dev, "xtal");
+	if (!IS_ERR(clk_osc)) {
+		s->clk = clk_osc;
+		fmin = 500000;
+		fmax = 35000000;
+	} else if (!IS_ERR(clk_xtal)) {
+		s->clk = clk_xtal;
+		fmin = 1000000;
+		fmax = 4000000;
+		xtal = true;
+	} else if (PTR_ERR(clk_osc) == -EPROBE_DEFER ||
+		   PTR_ERR(clk_xtal) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	} else {
+		dev_err(dev, "Cannot get clock\n");
+		return -EINVAL;
+	}
 
-	/* Setup regmap */
-	s->regcfg.reg_bits		= 8;
-	s->regcfg.val_bits		= 8;
-	s->regcfg.read_flag_mask	= 0x00;
-	s->regcfg.write_flag_mask	= 0x80;
-	s->regcfg.cache_type		= REGCACHE_RBTREE;
-	s->regcfg.writeable_reg		= max310x_reg_writeable;
-	s->regcfg.volatile_reg		= max310x_reg_volatile;
-	s->regcfg.precious_reg		= max310x_reg_precious;
-	s->regcfg.max_register		= devtype->nr * 0x20 - 1;
-
-	if (IS_ENABLED(CONFIG_SPI_MASTER) && is_spi) {
-		struct spi_device *spi = to_spi_device(dev);
-
-		s->regmap = devm_regmap_init_spi(spi, &s->regcfg);
-	} else
-		return -ENOTSUPP;
+	ret = clk_prepare_enable(s->clk);
+	if (ret)
+		return ret;
 
-	if (IS_ERR(s->regmap)) {
-		dev_err(dev, "Failed to initialize register map\n");
-		return PTR_ERR(s->regmap);
+	freq = clk_get_rate(s->clk);
+	/* Check frequency limits */
+	if (freq < fmin || freq > fmax) {
+		ret = -ERANGE;
+		goto out_clk;
 	}
 
-	/* Board specific configure */
-	if (s->pdata->init)
-		s->pdata->init();
+	s->regmap = regmap;
+	s->devtype = devtype;
+	dev_set_drvdata(dev, s);
 
 	/* Check device to ensure we are talking to what we expect */
 	ret = devtype->detect(dev);
 	if (ret)
-		return ret;
+		goto out_clk;
 
 	for (i = 0; i < devtype->nr; i++) {
 		unsigned int offs = i << 5;
@@ -1156,7 +1173,7 @@ static int max310x_probe(struct device *dev, int is_spi,
 				   MAX310X_MODE1_AUTOSLEEP_BIT);
 	}
 
-	uartclk = max310x_set_ref_clk(s);
+	uartclk = max310x_set_ref_clk(s, freq, xtal);
 	dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk);
 
 	/* Register UART driver */
@@ -1168,9 +1185,28 @@ static int max310x_probe(struct device *dev, int is_spi,
 	ret = uart_register_driver(&s->uart);
 	if (ret) {
 		dev_err(dev, "Registering UART driver failed\n");
-		return ret;
+		goto out_clk;
 	}
 
+#ifdef CONFIG_GPIOLIB
+	/* Setup GPIO cotroller */
+	s->gpio.owner		= THIS_MODULE;
+	s->gpio.dev		= dev;
+	s->gpio.label		= dev_name(dev);
+	s->gpio.direction_input	= max310x_gpio_direction_input;
+	s->gpio.get		= max310x_gpio_get;
+	s->gpio.direction_output= max310x_gpio_direction_output;
+	s->gpio.set		= max310x_gpio_set;
+	s->gpio.base		= -1;
+	s->gpio.ngpio		= devtype->nr * 4;
+	s->gpio.can_sleep	= 1;
+	ret = gpiochip_add(&s->gpio);
+	if (ret)
+		goto out_uart;
+#endif
+
+	mutex_init(&s->mutex);
+
 	for (i = 0; i < devtype->nr; i++) {
 		/* Initialize port data */
 		s->p[i].port.line	= i;
@@ -1178,8 +1214,7 @@ static int max310x_probe(struct device *dev, int is_spi,
 		s->p[i].port.irq	= irq;
 		s->p[i].port.type	= PORT_MAX310X;
 		s->p[i].port.fifosize	= MAX310X_FIFO_SIZE;
-		s->p[i].port.flags	= UPF_SKIP_TEST | UPF_FIXED_TYPE |
-					  UPF_LOW_LATENCY;
+		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.iobase	= i * 0x20;
 		s->p[i].port.membase	= (void __iomem *)~0;
@@ -1195,48 +1230,35 @@ static int max310x_probe(struct device *dev, int is_spi,
 				    MAX310X_MODE1_IRQSEL_BIT);
 		/* Initialize queue for start TX */
 		INIT_WORK(&s->p[i].tx_work, max310x_wq_proc);
+		/* Initialize queue for changing mode */
+		INIT_WORK(&s->p[i].md_work, max310x_md_proc);
 		/* Register port */
 		uart_add_one_port(&s->uart, &s->p[i].port);
 		/* Go to suspend mode */
 		devtype->power(&s->p[i].port, 0);
 	}
 
-#ifdef CONFIG_GPIOLIB
-	/* Setup GPIO cotroller */
-	if (s->pdata->gpio_base) {
-		s->gpio.owner		= THIS_MODULE;
-		s->gpio.dev		= dev;
-		s->gpio.label		= dev_name(dev);
-		s->gpio.direction_input	= max310x_gpio_direction_input;
-		s->gpio.get		= max310x_gpio_get;
-		s->gpio.direction_output= max310x_gpio_direction_output;
-		s->gpio.set		= max310x_gpio_set;
-		s->gpio.base		= s->pdata->gpio_base;
-		s->gpio.ngpio		= devtype->nr * 4;
-		s->gpio.can_sleep	= 1;
-		if (!gpiochip_add(&s->gpio))
-			s->gpio_used = 1;
-	} else
-		dev_info(dev, "GPIO support not enabled\n");
-#endif
-
 	/* Setup interrupt */
 	ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist,
-					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-					dev_name(dev), s);
-	if (ret) {
-		dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+					IRQF_ONESHOT | flags, dev_name(dev), s);
+	if (!ret)
+		return 0;
+
+	dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+
+	mutex_destroy(&s->mutex);
+
 #ifdef CONFIG_GPIOLIB
-		if (s->gpio_used)
-			WARN_ON(gpiochip_remove(&s->gpio));
+	WARN_ON(gpiochip_remove(&s->gpio));
+
+out_uart:
 #endif
-	}
+	uart_unregister_driver(&s->uart);
 
-	return ret;
+out_clk:
+	clk_disable_unprepare(s->clk);
 
-err_freq:
-	dev_err(dev, "Frequency parameter incorrect\n");
-	return -EINVAL;
+	return ret;
 }
 
 static int max310x_remove(struct device *dev)
@@ -1244,30 +1266,51 @@ static int max310x_remove(struct device *dev)
 	struct max310x_port *s = dev_get_drvdata(dev);
 	int i, ret = 0;
 
+#ifdef CONFIG_GPIOLIB
+	ret = gpiochip_remove(&s->gpio);
+	if (ret)
+		return ret;
+#endif
+
 	for (i = 0; i < s->uart.nr; i++) {
 		cancel_work_sync(&s->p[i].tx_work);
+		cancel_work_sync(&s->p[i].md_work);
 		uart_remove_one_port(&s->uart, &s->p[i].port);
 		s->devtype->power(&s->p[i].port, 0);
 	}
 
+	mutex_destroy(&s->mutex);
 	uart_unregister_driver(&s->uart);
-
-#ifdef CONFIG_GPIOLIB
-	if (s->gpio_used)
-		ret = gpiochip_remove(&s->gpio);
-#endif
-
-	if (s->pdata->exit)
-		s->pdata->exit();
+	clk_disable_unprepare(s->clk);
 
 	return ret;
 }
 
+static const struct of_device_id __maybe_unused max310x_dt_ids[] = {
+	{ .compatible = "maxim,max3107",	.data = &max3107_devtype, },
+	{ .compatible = "maxim,max3108",	.data = &max3108_devtype, },
+	{ .compatible = "maxim,max3109",	.data = &max3109_devtype, },
+	{ .compatible = "maxim,max14830",	.data = &max14830_devtype },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max310x_dt_ids);
+
+static struct regmap_config regcfg = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.write_flag_mask = 0x80,
+	.cache_type = REGCACHE_RBTREE,
+	.writeable_reg = max310x_reg_writeable,
+	.volatile_reg = max310x_reg_volatile,
+	.precious_reg = max310x_reg_precious,
+};
+
 #ifdef CONFIG_SPI_MASTER
 static int max310x_spi_probe(struct spi_device *spi)
 {
-	struct max310x_devtype *devtype =
-		(struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
+	struct max310x_devtype *devtype;
+	unsigned long flags = 0;
+	struct regmap *regmap;
 	int ret;
 
 	/* Setup SPI bus */
@@ -1275,12 +1318,25 @@ static int max310x_spi_probe(struct spi_device *spi)
 	spi->mode		= spi->mode ? : SPI_MODE_0;
 	spi->max_speed_hz	= spi->max_speed_hz ? : 26000000;
 	ret = spi_setup(spi);
-	if (ret) {
-		dev_err(&spi->dev, "SPI setup failed\n");
+	if (ret)
 		return ret;
+
+	if (spi->dev.of_node) {
+		const struct of_device_id *of_id =
+			of_match_device(max310x_dt_ids, &spi->dev);
+
+		devtype = (struct max310x_devtype *)of_id->data;
+	} else {
+		const struct spi_device_id *id_entry = spi_get_device_id(spi);
+
+		devtype = (struct max310x_devtype *)id_entry->driver_data;
+		flags = IRQF_TRIGGER_FALLING;
 	}
 
-	return max310x_probe(&spi->dev, 1, devtype, spi->irq);
+	regcfg.max_register = devtype->nr * 0x20 - 1;
+	regmap = devm_regmap_init_spi(spi, &regcfg);
+
+	return max310x_probe(&spi->dev, devtype, regmap, spi->irq, flags);
 }
 
 static int max310x_spi_remove(struct spi_device *spi)
@@ -1288,8 +1344,6 @@ static int max310x_spi_remove(struct spi_device *spi)
 	return max310x_remove(&spi->dev);
 }
 
-static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
-
 static const struct spi_device_id max310x_id_table[] = {
 	{ "max3107",	(kernel_ulong_t)&max3107_devtype, },
 	{ "max3108",	(kernel_ulong_t)&max3108_devtype, },
@@ -1301,9 +1355,10 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table);
 
 static struct spi_driver max310x_uart_driver = {
 	.driver = {
-		.name	= MAX310X_NAME,
-		.owner	= THIS_MODULE,
-		.pm	= &max310x_pm_ops,
+		.name		= MAX310X_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(max310x_dt_ids),
+		.pm		= &max310x_pm_ops,
 	},
 	.probe		= max310x_spi_probe,
 	.remove		= max310x_spi_remove,
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b5d779cd3c2..053b98eb46c 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -39,6 +39,13 @@
 
 #include "msm_serial.h"
 
+enum {
+	UARTDM_1P1 = 1,
+	UARTDM_1P2,
+	UARTDM_1P3,
+	UARTDM_1P4,
+};
+
 struct msm_port {
 	struct uart_port	uart;
 	char			name[16];
@@ -309,6 +316,8 @@ static unsigned int msm_get_mctrl(struct uart_port *port)
 
 static void msm_reset(struct uart_port *port)
 {
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
 	/* reset everything */
 	msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
 	msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
@@ -316,6 +325,10 @@ static void msm_reset(struct uart_port *port)
 	msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
 	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
 	msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+
+	/* Disable DM modes */
+	if (msm_port->is_uartdm)
+		msm_write(port, 0, UARTDM_DMEN);
 }
 
 static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -711,6 +724,117 @@ static void msm_power(struct uart_port *port, unsigned int state,
 	}
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int msm_poll_init(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	/* Enable single character mode on RX FIFO */
+	if (msm_port->is_uartdm >= UARTDM_1P4)
+		msm_write(port, UARTDM_DMEN_RX_SC_ENABLE, UARTDM_DMEN);
+
+	return 0;
+}
+
+static int msm_poll_get_char_single(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
+
+	if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
+		return NO_POLL_CHAR;
+	else
+		return msm_read(port, rf_reg) & 0xff;
+}
+
+static int msm_poll_get_char_dm_1p3(struct uart_port *port)
+{
+	int c;
+	static u32 slop;
+	static int count;
+	unsigned char *sp = (unsigned char *)&slop;
+
+	/* Check if a previous read had more than one char */
+	if (count) {
+		c = sp[sizeof(slop) - count];
+		count--;
+	/* Or if FIFO is empty */
+	} else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
+		/*
+		 * If RX packing buffer has less than a word, force stale to
+		 * push contents into RX FIFO
+		 */
+		count = msm_read(port, UARTDM_RXFS);
+		count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
+		if (count) {
+			msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
+			slop = msm_read(port, UARTDM_RF);
+			c = sp[0];
+			count--;
+		} else {
+			c = NO_POLL_CHAR;
+		}
+	/* FIFO has a word */
+	} else {
+		slop = msm_read(port, UARTDM_RF);
+		c = sp[0];
+		count = sizeof(slop) - 1;
+	}
+
+	return c;
+}
+
+static int msm_poll_get_char(struct uart_port *port)
+{
+	u32 imr;
+	int c;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	/* Disable all interrupts */
+	imr = msm_read(port, UART_IMR);
+	msm_write(port, 0, UART_IMR);
+
+	if (msm_port->is_uartdm == UARTDM_1P3)
+		c = msm_poll_get_char_dm_1p3(port);
+	else
+		c = msm_poll_get_char_single(port);
+
+	/* Enable interrupts */
+	msm_write(port, imr, UART_IMR);
+
+	return c;
+}
+
+static void msm_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	u32 imr;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	/* Disable all interrupts */
+	imr = msm_read(port, UART_IMR);
+	msm_write(port, 0, UART_IMR);
+
+	if (msm_port->is_uartdm)
+		reset_dm_count(port, 1);
+
+	/* Wait until FIFO is empty */
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		cpu_relax();
+
+	/* Write a character */
+	msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
+
+	/* Wait until FIFO is empty */
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		cpu_relax();
+
+	/* Enable interrupts */
+	msm_write(port, imr, UART_IMR);
+
+	return;
+}
+#endif
+
 static struct uart_ops msm_uart_pops = {
 	.tx_empty = msm_tx_empty,
 	.set_mctrl = msm_set_mctrl,
@@ -729,6 +853,11 @@ static struct uart_ops msm_uart_pops = {
 	.config_port = msm_config_port,
 	.verify_port = msm_verify_port,
 	.pm = msm_power,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_init = msm_poll_init,
+	.poll_get_char	= msm_poll_get_char,
+	.poll_put_char	= msm_poll_put_char,
+#endif
 };
 
 static struct msm_port msm_uart_ports[] = {
@@ -900,7 +1029,10 @@ static struct uart_driver msm_uart_driver = {
 static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
 
 static const struct of_device_id msm_uartdm_table[] = {
-	{ .compatible = "qcom,msm-uartdm" },
+	{ .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
+	{ .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
+	{ .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
+	{ .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
 	{ }
 };
 
@@ -909,6 +1041,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 	struct msm_port *msm_port;
 	struct resource *resource;
 	struct uart_port *port;
+	const struct of_device_id *id;
 	int irq;
 
 	if (pdev->id == -1)
@@ -923,8 +1056,9 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 	port->dev = &pdev->dev;
 	msm_port = UART_TO_MSM(port);
 
-	if (of_match_device(msm_uartdm_table, &pdev->dev))
-		msm_port->is_uartdm = 1;
+	id = of_match_device(msm_uartdm_table, &pdev->dev);
+	if (id)
+		msm_port->is_uartdm = (unsigned long)id->data;
 	else
 		msm_port->is_uartdm = 0;
 
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 469fda50ac6..1e9b68b6f9e 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -59,6 +59,7 @@
 #define UART_CR_CMD_RESET_RFR		(14 << 4)
 #define UART_CR_CMD_PROTECTION_EN	(16 << 4)
 #define UART_CR_CMD_STALE_EVENT_ENABLE	(80 << 4)
+#define UART_CR_CMD_FORCE_STALE		(4 << 8)
 #define UART_CR_CMD_RESET_TX_READY	(3 << 8)
 #define UART_CR_TX_DISABLE		(1 << 3)
 #define UART_CR_TX_ENABLE		(1 << 2)
@@ -113,6 +114,14 @@
 #define GSBI_PROTOCOL_UART	0x40
 #define GSBI_PROTOCOL_IDLE	0x0
 
+#define UARTDM_RXFS		0x50
+#define UARTDM_RXFS_BUF_SHIFT	0x7
+#define UARTDM_RXFS_BUF_MASK	0x7
+
+#define UARTDM_DMEN		0x3C
+#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
+#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
+
 #define UARTDM_DMRX		0x34
 #define UARTDM_NCF_TX		0x40
 #define UARTDM_RX_TOTAL_SNAP	0x38
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 77f035158d6..dd8b1a5458f 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -342,7 +342,14 @@ static void serial_omap_stop_tx(struct uart_port *port)
 
 	if ((up->rs485.flags & SER_RS485_ENABLED) &&
 	    !(up->rs485.flags & SER_RS485_RX_DURING_TX)) {
-		up->ier = UART_IER_RLSI | UART_IER_RDI;
+		/*
+		 * Empty the RX FIFO, we are not interested in anything
+		 * received during the half-duplex transmission.
+		 */
+		serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR);
+		/* Re-enable RX interrupts */
+		up->ier |= UART_IER_RLSI | UART_IER_RDI;
+		up->port.read_status_mask |= UART_LSR_DR;
 		serial_out(up, UART_IER, up->ier);
 	}
 
@@ -355,7 +362,7 @@ static void serial_omap_stop_rx(struct uart_port *port)
 	struct uart_omap_port *up = to_uart_omap_port(port);
 
 	pm_runtime_get_sync(up->dev);
-	up->ier &= ~UART_IER_RLSI;
+	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	up->port.read_status_mask &= ~UART_LSR_DR;
 	serial_out(up, UART_IER, up->ier);
 	pm_runtime_mark_last_busy(up->dev);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 8fa1134e005..0931b3fe9ed 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1762,7 +1762,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	int fifosize;
 	int port_type;
 	struct pch_uart_driver_data *board;
+#ifdef CONFIG_DEBUG_FS
 	char name[32];	/* for debugfs file name */
+#endif
 
 	board = &drv_dat[id->driver_data];
 	port_type = board->port_type;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 9cd706df3b3..23f45960073 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1282,6 +1282,14 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto probe_err;
 
+	if (!s3c24xx_uart_drv.state) {
+		ret = uart_register_driver(&s3c24xx_uart_drv);
+		if (ret < 0) {
+			pr_err("Failed to register Samsung UART driver\n");
+			return ret;
+		}
+	}
+
 	dbg("%s: adding port\n", __func__);
 	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
 	platform_set_drvdata(pdev, &ourport->port);
@@ -1321,6 +1329,8 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
 		uart_remove_one_port(&s3c24xx_uart_drv, port);
 	}
 
+	uart_unregister_driver(&s3c24xx_uart_drv);
+
 	return 0;
 }
 
@@ -1820,35 +1830,7 @@ static struct platform_driver samsung_serial_driver = {
 	},
 };
 
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
-	int ret;
-
-	ret = uart_register_driver(&s3c24xx_uart_drv);
-	if (ret < 0) {
-		pr_err("Failed to register Samsung UART driver\n");
-		return ret;
-	}
-
-	ret = platform_driver_register(&samsung_serial_driver);
-	if (ret < 0) {
-		pr_err("Failed to register platform driver\n");
-		uart_unregister_driver(&s3c24xx_uart_drv);
-	}
-
-	return ret;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
-	platform_driver_unregister(&samsung_serial_driver);
-	uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
+module_platform_driver(samsung_serial_driver);
 
 MODULE_ALIAS("platform:samsung-uart");
 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index ece2049bd27..2cf5649a6dc 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1319,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	uport = state->uart_port;
 	port = &state->port;
 
-	pr_debug("uart_close(%d) called\n", uport->line);
+	pr_debug("uart_close(%d) called\n", uport ? uport->line : -1);
 
-	if (tty_port_close_start(port, tty, filp) == 0)
+	if (!port->count || tty_port_close_start(port, tty, filp) == 0)
 		return;
 
 	/*
@@ -1762,7 +1762,7 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co)
 }
 
 /**
- *	uart_parse_options - Parse serial port baud/parity/bits/flow contro.
+ *	uart_parse_options - Parse serial port baud/parity/bits/flow control.
  *	@options: pointer to option string
  *	@baud: pointer to an 'int' variable for the baud rate.
  *	@parity: pointer to an 'int' variable for the parity.
@@ -2609,7 +2609,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 
 	/*
 	 * Register the port whether it's detected or not.  This allows
-	 * setserial to be used to alter this ports parameters.
+	 * setserial to be used to alter this port's parameters.
 	 */
 	tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
 			uport->line, uport->dev, port, tty_dev_attr_groups);
@@ -2645,6 +2645,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
 	struct uart_state *state = drv->state + uport->line;
 	struct tty_port *port = &state->port;
+	struct tty_struct *tty;
 	int ret = 0;
 
 	BUG_ON(in_interrupt());
@@ -2673,8 +2674,17 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 	 */
 	tty_unregister_device(drv->tty_driver, uport->line);
 
-	if (port->tty)
+	tty = tty_port_tty_get(port);
+	if (tty) {
 		tty_vhangup(port->tty);
+		tty_kref_put(tty);
+	}
+
+	/*
+	 * If the port is used as a console, unregister it
+	 */
+	if (uart_console(uport))
+		unregister_console(uport->cons);
 
 	/*
 	 * Free the port IO and memory resources, if any.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7e0b6260263..88236da0ddf 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -428,7 +428,7 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
 		cfg->regtype = SCIx_HSCIF_REGTYPE;
 		break;
 	default:
-		printk(KERN_ERR "Can't probe register map for given port\n");
+		pr_err("Can't probe register map for given port\n");
 		return -EINVAL;
 	}
 
@@ -788,7 +788,7 @@ static int sci_handle_errors(struct uart_port *port)
 		if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
 			copied++;
 
-		dev_notice(port->dev, "overrun error");
+		dev_notice(port->dev, "overrun error\n");
 	}
 
 	if (status & SCxSR_FER(port)) {
@@ -830,7 +830,7 @@ static int sci_handle_errors(struct uart_port *port)
 		if (tty_insert_flip_char(tport, 0, TTY_PARITY))
 			copied++;
 
-		dev_notice(port->dev, "parity error");
+		dev_notice(port->dev, "parity error\n");
 	}
 
 	if (copied)
@@ -911,7 +911,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 		/* Disable future Rx interrupts */
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 			disable_irq_nosync(irq);
-			scr |= 0x4000;
+			scr |= SCSCR_RDRQE;
 		} else {
 			scr &= ~SCSCR_RIE;
 		}
@@ -1199,7 +1199,9 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		 */
 		reg = sci_getreg(port, SCFCR);
 		if (reg->size)
-			serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1);
+			serial_port_out(port, SCFCR,
+					serial_port_in(port, SCFCR) |
+					SCFCR_LOOP);
 	}
 }
 
@@ -1289,7 +1291,8 @@ static void sci_dma_rx_complete(void *arg)
 	unsigned long flags;
 	int count;
 
-	dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
+	dev_dbg(port->dev, "%s(%d) active #%d\n",
+		__func__, port->line, s->active_rx);
 
 	spin_lock_irqsave(&port->lock, flags);
 
@@ -1365,8 +1368,8 @@ static void sci_submit_rx(struct sci_port *s)
 			sci_rx_dma_release(s, true);
 			return;
 		}
-		dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
-			s->cookie_rx[i], i);
+		dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n",
+			__func__, s->cookie_rx[i], i);
 	}
 
 	s->active_rx = s->cookie_rx[0];
@@ -1425,8 +1428,8 @@ static void work_fn_rx(struct work_struct *work)
 
 	s->active_rx = s->cookie_rx[!new];
 
-	dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
-		s->cookie_rx[new], new, s->active_rx);
+	dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n",
+		__func__, s->cookie_rx[new], new, s->active_rx);
 }
 
 static void work_fn_tx(struct work_struct *work)
@@ -1479,8 +1482,8 @@ static void work_fn_tx(struct work_struct *work)
 		return;
 	}
 
-	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
-		xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+		__func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
 
 	dma_async_issue_pending(chan);
 }
@@ -1495,9 +1498,9 @@ static void sci_start_tx(struct uart_port *port)
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		u16 new, scr = serial_port_in(port, SCSCR);
 		if (s->chan_tx)
-			new = scr | 0x8000;
+			new = scr | SCSCR_TDRQE;
 		else
-			new = scr & ~0x8000;
+			new = scr & ~SCSCR_TDRQE;
 		if (new != scr)
 			serial_port_out(port, SCSCR, new);
 	}
@@ -1524,7 +1527,7 @@ static void sci_stop_tx(struct uart_port *port)
 	ctrl = serial_port_in(port, SCSCR);
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
-		ctrl &= ~0x8000;
+		ctrl &= ~SCSCR_TDRQE;
 
 	ctrl &= ~SCSCR_TIE;
 
@@ -1538,7 +1541,7 @@ static void sci_start_rx(struct uart_port *port)
 	ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
-		ctrl &= ~0x4000;
+		ctrl &= ~SCSCR_RDRQE;
 
 	serial_port_out(port, SCSCR, ctrl);
 }
@@ -1550,7 +1553,7 @@ static void sci_stop_rx(struct uart_port *port)
 	ctrl = serial_port_in(port, SCSCR);
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
-		ctrl &= ~0x4000;
+		ctrl &= ~SCSCR_RDRQE;
 
 	ctrl &= ~port_rx_irq_mask(port);
 
@@ -1599,8 +1602,8 @@ static bool filter(struct dma_chan *chan, void *slave)
 {
 	struct sh_dmae_slave *param = slave;
 
-	dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
-		param->shdma_slave.slave_id);
+	dev_dbg(chan->device->dev, "%s: slave ID %d\n",
+		__func__, param->shdma_slave.slave_id);
 
 	chan->private = &param->shdma_slave;
 	return true;
@@ -1613,7 +1616,7 @@ static void rx_timer_fn(unsigned long arg)
 	u16 scr = serial_port_in(port, SCSCR);
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
-		scr &= ~0x4000;
+		scr &= ~SCSCR_RDRQE;
 		enable_irq(s->irqs[SCIx_RXI_IRQ]);
 	}
 	serial_port_out(port, SCSCR, scr | SCSCR_RIE);
@@ -1629,8 +1632,7 @@ static void sci_request_dma(struct uart_port *port)
 	dma_cap_mask_t mask;
 	int nent;
 
-	dev_dbg(port->dev, "%s: port %d\n", __func__,
-		port->line);
+	dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
 
 	if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
 		return;
@@ -1658,7 +1660,8 @@ static void sci_request_dma(struct uart_port *port)
 		if (!nent)
 			sci_tx_dma_release(s, false);
 		else
-			dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+			dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n",
+				__func__,
 				sg_dma_len(&s->sg_tx), port->state->xmit.buf,
 				&sg_dma_address(&s->sg_tx));
 
@@ -1870,13 +1873,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	smr_val = serial_port_in(port, SCSMR) & 3;
 
 	if ((termios->c_cflag & CSIZE) == CS7)
-		smr_val |= 0x40;
+		smr_val |= SCSMR_CHR;
 	if (termios->c_cflag & PARENB)
-		smr_val |= 0x20;
+		smr_val |= SCSMR_PE;
 	if (termios->c_cflag & PARODD)
-		smr_val |= 0x30;
+		smr_val |= SCSMR_PE | SCSMR_ODD;
 	if (termios->c_cflag & CSTOPB)
-		smr_val |= 0x08;
+		smr_val |= SCSMR_STOP;
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
@@ -1884,7 +1887,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 		__func__, smr_val, cks, t, s->cfg->scscr);
 
 	if (t >= 0) {
-		serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
+		serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks);
 		serial_port_out(port, SCBRR, t);
 		reg = sci_getreg(port, HSSRR);
 		if (reg->size)
@@ -1932,8 +1935,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (s->chan_rx) {
 		s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
 			port->fifosize / 2;
-		dev_dbg(port->dev,
-			"DMA Rx t-out %ums, tty t-out %u jiffies\n",
+		dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
 			s->rx_timeout * 1000 / HZ, port->timeout);
 		if (s->rx_timeout < msecs_to_jiffies(20))
 			s->rx_timeout = msecs_to_jiffies(20);
@@ -1952,7 +1954,7 @@ static void sci_pm(struct uart_port *port, unsigned int state,
 	struct sci_port *sci_port = to_sci_port(port);
 
 	switch (state) {
-	case 3:
+	case UART_PM_STATE_OFF:
 		sci_port_disable(sci_port);
 		break;
 	default:
@@ -2017,7 +2019,7 @@ static int sci_remap_port(struct uart_port *port)
 		 * need to do any remapping, just cast the cookie
 		 * directly.
 		 */
-		port->membase = (void __iomem *)port->mapbase;
+		port->membase = (void __iomem *)(uintptr_t)port->mapbase;
 	}
 
 	return 0;
@@ -2388,8 +2390,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
-static char banner[] __initdata =
-	KERN_INFO "SuperH (H)SCI(F) driver initialized\n";
+static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
 
 static struct uart_driver sci_uart_driver = {
 	.owner		= THIS_MODULE,
@@ -2423,25 +2424,25 @@ struct sci_port_info {
 static const struct of_device_id of_sci_match[] = {
 	{
 		.compatible = "renesas,scif",
-		.data = (void *)&(const struct sci_port_info) {
+		.data = &(const struct sci_port_info) {
 			.type = PORT_SCIF,
 			.regtype = SCIx_SH4_SCIF_REGTYPE,
 		},
 	}, {
 		.compatible = "renesas,scifa",
-		.data = (void *)&(const struct sci_port_info) {
+		.data = &(const struct sci_port_info) {
 			.type = PORT_SCIFA,
 			.regtype = SCIx_SCIFA_REGTYPE,
 		},
 	}, {
 		.compatible = "renesas,scifb",
-		.data = (void *)&(const struct sci_port_info) {
+		.data = &(const struct sci_port_info) {
 			.type = PORT_SCIFB,
 			.regtype = SCIx_SCIFB_REGTYPE,
 		},
 	}, {
 		.compatible = "renesas,hscif",
-		.data = (void *)&(const struct sci_port_info) {
+		.data = &(const struct sci_port_info) {
 			.type = PORT_HSCIF,
 			.regtype = SCIx_HSCIF_REGTYPE,
 		},
@@ -2501,11 +2502,9 @@ static int sci_probe_single(struct platform_device *dev,
 
 	/* Sanity check */
 	if (unlikely(index >= SCI_NPORTS)) {
-		dev_notice(&dev->dev, "Attempting to register port "
-			   "%d when only %d are available.\n",
+		dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n",
 			   index+1, SCI_NPORTS);
-		dev_notice(&dev->dev, "Consider bumping "
-			   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+		dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
 		return -EINVAL;
 	}
 
@@ -2563,6 +2562,7 @@ static int sci_probe(struct platform_device *dev)
 	ret = cpufreq_register_notifier(&sp->freq_transition,
 					CPUFREQ_TRANSITION_NOTIFIER);
 	if (unlikely(ret < 0)) {
+		uart_remove_one_port(&sci_uart_driver, &sp->port);
 		sci_cleanup_single(sp);
 		return ret;
 	}
@@ -2614,7 +2614,7 @@ static int __init sci_init(void)
 {
 	int ret;
 
-	printk(banner);
+	pr_info("%s\n", banner);
 
 	ret = uart_register_driver(&sci_uart_driver);
 	if (likely(ret == 0)) {
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index b7bfe24d4eb..68b0fd4b9a6 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -24,7 +24,6 @@
 #include <linux/dmaengine.h>
 #include <linux/dma-direction.h>
 #include <linux/dma-mapping.h>
-#include <linux/sirfsoc_dma.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
@@ -173,7 +172,7 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 
-	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
+	if (sirfport->tx_dma_chan) {
 		if (sirfport->tx_dma_state == TX_DMA_RUNNING) {
 			dmaengine_pause(sirfport->tx_dma_chan);
 			sirfport->tx_dma_state = TX_DMA_PAUSE;
@@ -288,7 +287,7 @@ static void sirfsoc_uart_start_tx(struct uart_port *port)
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+	if (sirfport->tx_dma_chan)
 		sirfsoc_uart_tx_with_dma(sirfport);
 	else {
 		sirfsoc_uart_pio_tx_chars(sirfport, 1);
@@ -310,7 +309,7 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
 	struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
 
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
-	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
+	if (sirfport->rx_dma_chan) {
 		if (!sirfport->is_marco)
 			wr_regl(port, ureg->sirfsoc_int_en_reg,
 				rd_regl(port, ureg->sirfsoc_int_en_reg) &
@@ -675,7 +674,7 @@ recv_char:
 		uart_handle_cts_change(port, cts_status);
 		wake_up_interruptible(&state->port.delta_msr_wait);
 	}
-	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
+	if (sirfport->rx_dma_chan) {
 		if (intr_status & uint_st->sirfsoc_rx_timeout)
 			sirfsoc_uart_handle_rx_tmo(sirfport);
 		if (intr_status & uint_st->sirfsoc_rx_done)
@@ -686,7 +685,7 @@ recv_char:
 					SIRFSOC_UART_IO_RX_MAX_CNT);
 	}
 	if (intr_status & uint_st->sirfsoc_txfifo_empty) {
-		if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+		if (sirfport->tx_dma_chan)
 			sirfsoc_uart_tx_with_dma(sirfport);
 		else {
 			if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
@@ -778,7 +777,7 @@ static void sirfsoc_uart_start_rx(struct uart_port *port)
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
-	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
+	if (sirfport->rx_dma_chan)
 		sirfsoc_uart_start_next_rx_dma(port);
 	else {
 		if (!sirfport->is_marco)
@@ -1014,11 +1013,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 			(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
 			SIRFSOC_USP_ASYNC_DIV2_OFFSET);
 	}
-	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no))
+	if (sirfport->tx_dma_chan)
 		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE);
 	else
 		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
-	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
+	if (sirfport->rx_dma_chan)
 		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
 	else
 		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
@@ -1049,93 +1048,6 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
 		clk_disable_unprepare(sirfport->clk);
 }
 
-static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port)
-{
-	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
-	dma_cap_mask_t dma_mask;
-	struct dma_slave_config tx_slv_cfg = {
-		.dst_maxburst = 2,
-	};
-
-	dma_cap_zero(dma_mask);
-	dma_cap_set(DMA_SLAVE, dma_mask);
-	sirfport->tx_dma_chan = dma_request_channel(dma_mask,
-		(dma_filter_fn)sirfsoc_dma_filter_id,
-		(void *)sirfport->tx_dma_no);
-	if (!sirfport->tx_dma_chan) {
-		dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
-					sirfport->tx_dma_no);
-		return  -EPROBE_DEFER;
-	}
-	dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
-
-	return 0;
-}
-
-static unsigned int sirfsoc_uart_init_rx_dma(struct uart_port *port)
-{
-	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
-	dma_cap_mask_t dma_mask;
-	int ret;
-	int i, j;
-	struct dma_slave_config slv_cfg = {
-		.src_maxburst = 2,
-	};
-
-	dma_cap_zero(dma_mask);
-	dma_cap_set(DMA_SLAVE, dma_mask);
-	sirfport->rx_dma_chan = dma_request_channel(dma_mask,
-					(dma_filter_fn)sirfsoc_dma_filter_id,
-					(void *)sirfport->rx_dma_no);
-	if (!sirfport->rx_dma_chan) {
-		dev_err(port->dev, "Uart Request Dma Channel Fail %d\n",
-				sirfport->rx_dma_no);
-		ret = -EPROBE_DEFER;
-		goto request_err;
-	}
-	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
-		sirfport->rx_dma_items[i].xmit.buf =
-			dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
-			&sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
-		if (!sirfport->rx_dma_items[i].xmit.buf) {
-			dev_err(port->dev, "Uart alloc bufa failed\n");
-			ret = -ENOMEM;
-			goto alloc_coherent_err;
-		}
-		sirfport->rx_dma_items[i].xmit.head =
-			sirfport->rx_dma_items[i].xmit.tail = 0;
-	}
-	dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
-
-	return 0;
-alloc_coherent_err:
-	for (j = 0; j < i; j++)
-		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
-				sirfport->rx_dma_items[j].xmit.buf,
-				sirfport->rx_dma_items[j].dma_addr);
-	dma_release_channel(sirfport->rx_dma_chan);
-request_err:
-	return ret;
-}
-
-static void sirfsoc_uart_uninit_tx_dma(struct sirfsoc_uart_port *sirfport)
-{
-	dmaengine_terminate_all(sirfport->tx_dma_chan);
-	dma_release_channel(sirfport->tx_dma_chan);
-}
-
-static void sirfsoc_uart_uninit_rx_dma(struct sirfsoc_uart_port *sirfport)
-{
-	int i;
-	struct uart_port *port = &sirfport->port;
-	dmaengine_terminate_all(sirfport->rx_dma_chan);
-	dma_release_channel(sirfport->rx_dma_chan);
-	for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
-		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
-				sirfport->rx_dma_items[i].xmit.buf,
-				sirfport->rx_dma_items[i].dma_addr);
-}
-
 static int sirfsoc_uart_startup(struct uart_port *port)
 {
 	struct sirfsoc_uart_port *sirfport	= to_sirfport(port);
@@ -1174,18 +1086,12 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 	wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
 	wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
 	wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
-
-	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no)) {
-		ret = sirfsoc_uart_init_rx_dma(port);
-		if (ret)
-			goto init_rx_err;
+	if (sirfport->rx_dma_chan)
 		wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
-				SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
-				SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
-				SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
-	}
-	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
-		sirfsoc_uart_init_tx_dma(port);
+			SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
+			SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
+			SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
+	if (sirfport->tx_dma_chan) {
 		sirfport->tx_dma_state = TX_DMA_IDLE;
 		wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
 				SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) |
@@ -1232,12 +1138,8 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
 		gpio_set_value(sirfport->rts_gpio, 1);
 		free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport);
 	}
-	if (IS_DMA_CHAN_VALID(sirfport->rx_dma_no))
-		sirfsoc_uart_uninit_rx_dma(sirfport);
-	if (IS_DMA_CHAN_VALID(sirfport->tx_dma_no)) {
-		sirfsoc_uart_uninit_tx_dma(sirfport);
+	if (sirfport->tx_dma_chan)
 		sirfport->tx_dma_state = TX_DMA_IDLE;
-	}
 }
 
 static const char *sirfsoc_uart_type(struct uart_port *port)
@@ -1313,8 +1215,8 @@ sirfsoc_uart_console_setup(struct console *co, char *options)
 	port->cons = co;
 
 	/* default console tx/rx transfer using io mode */
-	sirfport->rx_dma_no = UNVALID_DMA_CHAN;
-	sirfport->tx_dma_no = UNVALID_DMA_CHAN;
+	sirfport->rx_dma_chan = NULL;
+	sirfport->tx_dma_chan = NULL;
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
@@ -1382,6 +1284,13 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 	struct uart_port *port;
 	struct resource *res;
 	int ret;
+	int i, j;
+	struct dma_slave_config slv_cfg = {
+		.src_maxburst = 2,
+	};
+	struct dma_slave_config tx_slv_cfg = {
+		.dst_maxburst = 2,
+	};
 	const struct of_device_id *match;
 
 	match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node);
@@ -1402,27 +1311,10 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 
 	sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node,
 		"sirf,uart-has-rtscts");
-	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) {
+	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart"))
 		sirfport->uart_reg->uart_type = SIRF_REAL_UART;
-		if (of_property_read_u32(pdev->dev.of_node,
-				"sirf,uart-dma-rx-channel",
-				&sirfport->rx_dma_no))
-			sirfport->rx_dma_no = UNVALID_DMA_CHAN;
-		if (of_property_read_u32(pdev->dev.of_node,
-				"sirf,uart-dma-tx-channel",
-				&sirfport->tx_dma_no))
-			sirfport->tx_dma_no = UNVALID_DMA_CHAN;
-	}
 	if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) {
 		sirfport->uart_reg->uart_type =	SIRF_USP_UART;
-		if (of_property_read_u32(pdev->dev.of_node,
-				"sirf,usp-dma-rx-channel",
-				&sirfport->rx_dma_no))
-			sirfport->rx_dma_no = UNVALID_DMA_CHAN;
-		if (of_property_read_u32(pdev->dev.of_node,
-				"sirf,usp-dma-tx-channel",
-				&sirfport->tx_dma_no))
-			sirfport->tx_dma_no = UNVALID_DMA_CHAN;
 		if (!sirfport->hw_flow_ctrl)
 			goto usp_no_flow_control;
 		if (of_find_property(pdev->dev.of_node, "cts-gpios", NULL))
@@ -1515,8 +1407,32 @@ usp_no_flow_control:
 		goto port_err;
 	}
 
-	return 0;
+	sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
+	for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
+		sirfport->rx_dma_items[i].xmit.buf =
+			dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+			&sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
+		if (!sirfport->rx_dma_items[i].xmit.buf) {
+			dev_err(port->dev, "Uart alloc bufa failed\n");
+			ret = -ENOMEM;
+			goto alloc_coherent_err;
+		}
+		sirfport->rx_dma_items[i].xmit.head =
+			sirfport->rx_dma_items[i].xmit.tail = 0;
+	}
+	if (sirfport->rx_dma_chan)
+		dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
+	sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
+	if (sirfport->tx_dma_chan)
+		dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
 
+	return 0;
+alloc_coherent_err:
+	for (j = 0; j < i; j++)
+		dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+				sirfport->rx_dma_items[j].xmit.buf,
+				sirfport->rx_dma_items[j].dma_addr);
+	dma_release_channel(sirfport->rx_dma_chan);
 port_err:
 	clk_put(sirfport->clk);
 err:
@@ -1529,6 +1445,19 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
 	struct uart_port *port = &sirfport->port;
 	clk_put(sirfport->clk);
 	uart_remove_one_port(&sirfsoc_uart_drv, port);
+	if (sirfport->rx_dma_chan) {
+		int i;
+		dmaengine_terminate_all(sirfport->rx_dma_chan);
+		dma_release_channel(sirfport->rx_dma_chan);
+		for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
+			dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+					sirfport->rx_dma_items[i].xmit.buf,
+					sirfport->rx_dma_items[i].dma_addr);
+	}
+	if (sirfport->tx_dma_chan) {
+		dmaengine_terminate_all(sirfport->tx_dma_chan);
+		dma_release_channel(sirfport->tx_dma_chan);
+	}
 	return 0;
 }
 
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index b7d679c0881..8a6eddad2f3 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -392,9 +392,6 @@ struct sirfsoc_uart_register sirfsoc_uart = {
 /* Indicate how many buffers used */
 #define SIRFSOC_RX_LOOP_BUF_CNT		2
 
-/* Indicate if DMA channel valid */
-#define IS_DMA_CHAN_VALID(x)	((x) != -1)
-#define UNVALID_DMA_CHAN	-1
 /* For Fast Baud Rate Calculation */
 struct sirfsoc_baudrate_to_regv {
 	unsigned int baud_rate;
@@ -423,8 +420,6 @@ struct sirfsoc_uart_port {
 	/* for SiRFmarco, there are SET/CLR for UART_INT_EN */
 	bool				is_marco;
 	struct sirfsoc_uart_register	*uart_reg;
-	int				rx_dma_no;
-	int				tx_dma_no;
 	struct dma_chan			*rx_dma_chan;
 	struct dma_chan			*tx_dma_chan;
 	dma_addr_t			tx_dma_addr;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 5ae14b46cce..d48e040cd8c 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -7866,6 +7866,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
 					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
 
+		memset(&new_line, 0, sizeof(new_line));
 		switch (flags){
 		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
 		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 144202eef6f..53ba8537de8 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1766,6 +1766,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
 					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
 
+		memset(&new_line, 0, sizeof(new_line));
 		switch (flags){
 		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
 		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 765125dff20..8ebd9f88a6f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -351,14 +351,11 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
  *	Takes any pending buffers and transfers their ownership to the
  *	ldisc side of the queue. It then schedules those characters for
  *	processing by the line discipline.
- *	Note that this function can only be used when the low_latency flag
- *	is unset. Otherwise the workqueue won't be flushed.
  */
 
 void tty_schedule_flip(struct tty_port *port)
 {
 	struct tty_bufhead *buf = &port->buf;
-	WARN_ON(port->low_latency);
 
 	buf->tail->commit = buf->tail->used;
 	schedule_work(&buf->work);
@@ -482,17 +479,15 @@ static void flush_to_ldisc(struct work_struct *work)
  */
 void tty_flush_to_ldisc(struct tty_struct *tty)
 {
-	if (!tty->port->low_latency)
-		flush_work(&tty->port->buf.work);
+	flush_work(&tty->port->buf.work);
 }
 
 /**
  *	tty_flip_buffer_push	-	terminal
  *	@port: tty port to push
  *
- *	Queue a push of the terminal flip buffers to the line discipline. This
- *	function must not be called from IRQ context if port->low_latency is
- *	set.
+ *	Queue a push of the terminal flip buffers to the line discipline.
+ *	Can be called from IRQ/atomic context.
  *
  *	In the event of the queue being busy for flipping the work will be
  *	held off and retried later.
@@ -500,14 +495,7 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
 
 void tty_flip_buffer_push(struct tty_port *port)
 {
-	struct tty_bufhead *buf = &port->buf;
-
-	buf->tail->commit = buf->tail->used;
-
-	if (port->low_latency)
-		flush_to_ldisc(&buf->work);
-	else
-		schedule_work(&buf->work);
+	tty_schedule_flip(port);
 }
 EXPORT_SYMBOL(tty_flip_buffer_push);
 
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c74a00ad7ad..d3448a90f0f 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1271,12 +1271,13 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
  *
  *	Locking: None
  */
-static void tty_line_name(struct tty_driver *driver, int index, char *p)
+static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
 {
 	if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
-		strcpy(p, driver->name);
+		return sprintf(p, "%s", driver->name);
 	else
-		sprintf(p, "%s%d", driver->name, index + driver->name_base);
+		return sprintf(p, "%s%d", driver->name,
+			       index + driver->name_base);
 }
 
 /**
@@ -3545,9 +3546,19 @@ static ssize_t show_cons_active(struct device *dev,
 		if (i >= ARRAY_SIZE(cs))
 			break;
 	}
-	while (i--)
-		count += sprintf(buf + count, "%s%d%c",
-				 cs[i]->name, cs[i]->index, i ? ' ':'\n');
+	while (i--) {
+		int index = cs[i]->index;
+		struct tty_driver *drv = cs[i]->device(cs[i], &index);
+
+		/* don't resolve tty0 as some programs depend on it */
+		if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
+			count += tty_line_name(drv, index, buf + count);
+		else
+			count += sprintf(buf + count, "%s%d",
+					 cs[i]->name, cs[i]->index);
+
+		count += sprintf(buf + count, "%c", i ? ' ':'\n');
+	}
 	console_unlock();
 
 	return count;
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 23b5d32954b..3ad0b61e35b 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1590,9 +1590,9 @@ static void restore_cur(struct vc_data *vc)
 	vc->vc_need_wrap = 0;
 }
 
-enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey,
+enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey,
 	EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd,
-	ESpalette };
+	ESpalette, ESosc };
 
 /* console_lock is held (except via vc_init()) */
 static void reset_terminal(struct vc_data *vc, int do_clear)
@@ -1652,11 +1652,15 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 	 *  Control characters can be used in the _middle_
 	 *  of an escape sequence.
 	 */
+	if (vc->vc_state == ESosc && c>=8 && c<=13) /* ... except for OSC */
+		return;
 	switch (c) {
 	case 0:
 		return;
 	case 7:
-		if (vc->vc_bell_duration)
+		if (vc->vc_state == ESosc)
+			vc->vc_state = ESnormal;
+		else if (vc->vc_bell_duration)
 			kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration);
 		return;
 	case 8:
@@ -1767,7 +1771,9 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 		} else if (c=='R') {   /* reset palette */
 			reset_palette(vc);
 			vc->vc_state = ESnormal;
-		} else
+		} else if (c>='0' && c<='9')
+			vc->vc_state = ESosc;
+		else
 			vc->vc_state = ESnormal;
 		return;
 	case ESpalette:
@@ -1807,9 +1813,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 			vc->vc_par[vc->vc_npar] *= 10;
 			vc->vc_par[vc->vc_npar] += c - '0';
 			return;
-		} else
-			vc->vc_state = ESgotpars;
-	case ESgotpars:
+		}
 		vc->vc_state = ESnormal;
 		switch(c) {
 		case 'h':
@@ -2023,6 +2027,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
 			vc->vc_translate = set_translate(vc->vc_G1_charset, vc);
 		vc->vc_state = ESnormal;
 		return;
+	case ESosc:
+		return;
 	default:
 		vc->vc_state = ESnormal;
 	}
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index b369292d4b9..ad0aca81200 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -549,8 +549,8 @@ static void gs_rx_push(unsigned long _port)
 		port->read_started--;
 	}
 
-	/* Push from tty to ldisc; without low_latency set this is handled by
-	 * a workqueue, so we won't get callbacks and can hold port_lock
+	/* Push from tty to ldisc; this is handled by a workqueue,
+	 * so we won't get callbacks and can hold port_lock
 	 */
 	if (do_push)
 		tty_flip_buffer_push(&port->port);
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h
deleted file mode 100644
index dd11dcd1a18..00000000000
--- a/include/linux/platform_data/max310x.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver
- *
- *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
- *
- *  Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
- *  Based on max3110.c, by Feng Tang <feng.tang@intel.com>
- *  Based on max3107.c, by Aavamobile
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- */
-
-#ifndef _MAX310X_H_
-#define _MAX310X_H_
-
-/*
- * Example board initialization data:
- *
- * static struct max310x_pdata max3107_pdata = {
- *	.driver_flags	= MAX310X_EXT_CLK,
- *	.uart_flags[0]	= MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL,
- *	.frequency	= 3686400,
- *	.gpio_base	= -1,
- * };
- *
- * static struct spi_board_info spi_device_max3107[] = {
- *	{
- *		.modalias	= "max3107",
- *		.irq		= IRQ_EINT3,
- *		.bus_num	= 1,
- *		.chip_select	= 1,
- *		.platform_data	= &max3107_pdata,
- *	},
- * };
- */
-
-#define MAX310X_MAX_UARTS	4
-
-/* MAX310X platform data structure */
-struct max310x_pdata {
-	/* Flags global to driver */
-	const u8		driver_flags;
-#define MAX310X_EXT_CLK		(0x00000001)	/* External clock enable */
-	/* Flags global to UART port */
-	const u8		uart_flags[MAX310X_MAX_UARTS];
-#define MAX310X_LOOPBACK	(0x00000001)	/* Loopback mode enable */
-#define MAX310X_ECHO_SUPRESS	(0x00000002)	/* Enable echo supress */
-#define MAX310X_AUTO_DIR_CTRL	(0x00000004)	/* Enable Auto direction
-						 * control (RS-485)
-						 */
-	/* Frequency (extrenal clock or crystal) */
-	const int		frequency;
-	/* GPIO base number (can be negative) */
-	const int		gpio_base;
-	/* Called during startup */
-	void (*init)(void);
-	/* Called before finish */
-	void (*exit)(void);
-};
-
-#endif
diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h
index 4adec9b154d..3cc2e3c4091 100644
--- a/include/linux/platform_data/serial-imx.h
+++ b/include/linux/platform_data/serial-imx.h
@@ -23,8 +23,6 @@
 #define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
 	unsigned int flags;
 	void (*irda_enable)(int enable);
 	unsigned int irda_inv_rx:1;
diff --git a/include/linux/serial_bcm63xx.h b/include/linux/serial_bcm63xx.h
index 570e964dc89..a80aa1a5bee 100644
--- a/include/linux/serial_bcm63xx.h
+++ b/include/linux/serial_bcm63xx.h
@@ -116,4 +116,6 @@
 					UART_FIFO_PARERR_MASK |		\
 					UART_FIFO_BRKDET_MASK)
 
+#define UART_REG_SIZE			24
+
 #endif /* _LINUX_SERIAL_BCM63XX_H */
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 22b3640c942..6c5e3bb282b 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -10,45 +10,59 @@
 
 #define SCIx_NOT_SUPPORTED	(-1)
 
-#define SCSCR_TIE	(1 << 7)
-#define SCSCR_RIE	(1 << 6)
-#define SCSCR_TE	(1 << 5)
-#define SCSCR_RE	(1 << 4)
-#define SCSCR_REIE	(1 << 3)	/* not supported by all parts */
-#define SCSCR_TOIE	(1 << 2)	/* not supported by all parts */
-#define SCSCR_CKE1	(1 << 1)
-#define SCSCR_CKE0	(1 << 0)
-
-/* SCxSR SCI */
-#define SCI_TDRE  0x80
-#define SCI_RDRF  0x40
-#define SCI_ORER  0x20
-#define SCI_FER   0x10
-#define SCI_PER   0x08
-#define SCI_TEND  0x04
+/* SCSMR (Serial Mode Register) */
+#define SCSMR_CHR	(1 << 6)	/* 7-bit Character Length */
+#define SCSMR_PE	(1 << 5)	/* Parity Enable */
+#define SCSMR_ODD	(1 << 4)	/* Odd Parity */
+#define SCSMR_STOP	(1 << 3)	/* Stop Bit Length */
+#define SCSMR_CKS	0x0003		/* Clock Select */
+
+/* Serial Control Register (@ = not supported by all parts) */
+#define SCSCR_TIE	(1 << 7)	/* Transmit Interrupt Enable */
+#define SCSCR_RIE	(1 << 6)	/* Receive Interrupt Enable */
+#define SCSCR_TE	(1 << 5)	/* Transmit Enable */
+#define SCSCR_RE	(1 << 4)	/* Receive Enable */
+#define SCSCR_REIE	(1 << 3)	/* Receive Error Interrupt Enable @ */
+#define SCSCR_TOIE	(1 << 2)	/* Timeout Interrupt Enable @ */
+#define SCSCR_CKE1	(1 << 1)	/* Clock Enable 1 */
+#define SCSCR_CKE0	(1 << 0)	/* Clock Enable 0 */
+/* SCIFA/SCIFB only */
+#define SCSCR_TDRQE	(1 << 15)	/* Tx Data Transfer Request Enable */
+#define SCSCR_RDRQE	(1 << 14)	/* Rx Data Transfer Request Enable */
+
+/* SCxSR (Serial Status Register) on SCI */
+#define SCI_TDRE  0x80			/* Transmit Data Register Empty */
+#define SCI_RDRF  0x40			/* Receive Data Register Full */
+#define SCI_ORER  0x20			/* Overrun Error */
+#define SCI_FER   0x10			/* Framing Error */
+#define SCI_PER   0x08			/* Parity Error */
+#define SCI_TEND  0x04			/* Transmit End */
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR SCIF, HSCIF */
-#define SCIF_ER    0x0080
-#define SCIF_TEND  0x0040
-#define SCIF_TDFE  0x0020
-#define SCIF_BRK   0x0010
-#define SCIF_FER   0x0008
-#define SCIF_PER   0x0004
-#define SCIF_RDF   0x0002
-#define SCIF_DR    0x0001
+/* SCxSR (Serial Status Register) on SCIF, HSCIF */
+#define SCIF_ER    0x0080		/* Receive Error */
+#define SCIF_TEND  0x0040		/* Transmission End */
+#define SCIF_TDFE  0x0020		/* Transmit FIFO Data Empty */
+#define SCIF_BRK   0x0010		/* Break Detect */
+#define SCIF_FER   0x0008		/* Framing Error */
+#define SCIF_PER   0x0004		/* Parity Error */
+#define SCIF_RDF   0x0002		/* Receive FIFO Data Full */
+#define SCIF_DR    0x0001		/* Receive Data Ready */
 
 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
 
-/* SCSPTR, optional */
-#define SCSPTR_RTSIO	(1 << 7)
-#define SCSPTR_CTSIO	(1 << 5)
-#define SCSPTR_SPB2IO	(1 << 1)
-#define SCSPTR_SPB2DT	(1 << 0)
+/* SCFCR (FIFO Control Register) */
+#define SCFCR_LOOP	(1 << 0)	/* Loopback Test */
+
+/* SCSPTR (Serial Port Register), optional */
+#define SCSPTR_RTSIO	(1 << 7)	/* Serial Port RTS Pin Input/Output */
+#define SCSPTR_CTSIO	(1 << 5)	/* Serial Port CTS Pin Input/Output */
+#define SCSPTR_SPB2IO	(1 << 1)	/* Serial Port Break Input/Output */
+#define SCSPTR_SPB2DT	(1 << 0)	/* Serial Port Break Data */
 
 /* HSSRR HSCIF */
-#define HSCIF_SRE	0x8000
+#define HSCIF_SRE	0x8000		/* Sampling Rate Register Enable */
 
 enum {
 	SCIx_PROBE_REGTYPE,
@@ -73,10 +87,19 @@ enum {
  * Not all registers will exist on all parts.
  */
 enum {
-	SCSMR, SCBRR, SCSCR, SCxSR,
-	SCFCR, SCFDR, SCxTDR, SCxRDR,
-	SCLSR, SCTFDR, SCRFDR, SCSPTR,
-	HSSRR,
+	SCSMR,				/* Serial Mode Register */
+	SCBRR,				/* Bit Rate Register */
+	SCSCR,				/* Serial Control Register */
+	SCxSR,				/* Serial Status Register */
+	SCFCR,				/* FIFO Control Register */
+	SCFDR,				/* FIFO Data Count Register */
+	SCxTDR,				/* Transmit (FIFO) Data Register */
+	SCxRDR,				/* Receive (FIFO) Data Register */
+	SCLSR,				/* Line Status Register */
+	SCTFDR,				/* Transmit FIFO Data Count Register */
+	SCRFDR,				/* Receive FIFO Data Count Register */
+	SCSPTR,				/* Serial Port Register */
+	HSSRR,				/* Sampling Rate Register */
 
 	SCIx_NR_REGS,
 };
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 90b4fdc8a61..b90b5c221ff 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -208,7 +208,7 @@ struct tty_port {
 	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
 	unsigned char		console:1,	/* port is a console */
-				low_latency:1;	/* direct buffer flush */
+				low_latency:1;	/* optional: tune for latency */
 	struct mutex		mutex;		/* Locking */
 	struct mutex		buf_mutex;	/* Buffer alloc lock */
 	unsigned char		*xmit_buf;	/* Optional buffer */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index b8347c207cb..add26da2fae 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -126,7 +126,6 @@
 
 #include <linux/fs.h>
 #include <linux/wait.h>
-#include <linux/wait.h>
 
 
 /*
author	Linus Torvalds <torvalds@linux-foundation.org>	2014-04-01 16:55:57 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2014-04-01 16:55:57 -0700
commit	cb1595563880a81dab6eab9a5ecb4520d2e76077 (patch)
tree	042907fc859287a40a454d57c034015742e38cbf
parent	c12e69c6aaf785fd307d05cb6f36ca0e7577ead7 (diff)
parent	3a13884abea08a5043b98d9374486ec859d1e03a (diff)