diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2013-09-09 16:54:32 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2013-09-20 23:05:10 +0200 |
| commit | e3f94b385748c10b735f392b69f39f33f02ca3a5 (patch) | |
| tree | 44bf587becb3fa0c228e5c3ccddf1efb3e7a11d4 | |
| parent | 7b85b867b99044da93f83851c806d1e324d49ed5 (diff) | |
gpio: iop: use readl/writel accessors
Use the standard 32bit I/O accessors instead of just assigning
addresses.
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| -rw-r--r-- | drivers/gpio/gpio-iop.c | 24 |
1 files changed, 16 insertions, 8 deletions
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c index 24a86b05dc8..0d991d73246 100644 --- a/drivers/gpio/gpio-iop.c +++ b/drivers/gpio/gpio-iop.c @@ -17,6 +17,8 @@ #include <linux/gpio.h> #include <linux/export.h> #include <linux/platform_device.h> +#include <linux/bitops.h> +#include <linux/io.h> #define IOP3XX_N_GPIOS 8 @@ -29,38 +31,44 @@ static void __iomem *base; #define IOP3XX_GPIO_REG(reg) (base + (reg)) -#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0000) -#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0004) -#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x0008) +#define IOP3XX_GPOE IOP3XX_GPIO_REG(0x0000) +#define IOP3XX_GPID IOP3XX_GPIO_REG(0x0004) +#define IOP3XX_GPOD IOP3XX_GPIO_REG(0x0008) static void gpio_line_config(int line, int direction) { unsigned long flags; + u32 val; local_irq_save(flags); + val = readl(IOP3XX_GPOE); if (direction == GPIO_IN) { - *IOP3XX_GPOE |= 1 << line; + val |= BIT(line); } else if (direction == GPIO_OUT) { - *IOP3XX_GPOE &= ~(1 << line); + val &= ~BIT(line); } + writel(val, IOP3XX_GPOE); local_irq_restore(flags); } static int gpio_line_get(int line) { - return !!(*IOP3XX_GPID & (1 << line)); + return !!(readl(IOP3XX_GPID) & BIT(line)); } static void gpio_line_set(int line, int value) { unsigned long flags; + u32 val; local_irq_save(flags); + val = readl(IOP3XX_GPOD); if (value == GPIO_LOW) { - *IOP3XX_GPOD &= ~(1 << line); + val &= ~BIT(line); } else if (value == GPIO_HIGH) { - *IOP3XX_GPOD |= 1 << line; + val |= BIT(line); } + writel(val, IOP3XX_GPOD); local_irq_restore(flags); } |