summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMurali Karicheri <m-karicheri2@ti.com>2010-02-01 17:38:53 -0500
committerKevin Hilman <khilman@deeprootsystems.com>2010-02-04 13:28:46 -0800
commitf2a4c59df62f4493c7cf7dfd349ec66bdd4b9fec (patch)
tree179a5d04ef3034d82da2299ef2478e05bd5247f2
parentabe94c756c08d50566c09a65b9c7fe72f83071c5 (diff)
DaVinci - Adding platform & board changes for vpfe capture on DM365
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c71
-rw-r--r--arch/arm/mach-davinci/dm365.c102
-rw-r--r--arch/arm/mach-davinci/include/mach/dm365.h2
3 files changed, 174 insertions, 1 deletions
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index b476395d2cd..38e9033d2e8 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -37,6 +37,8 @@
#include <mach/nand.h>
#include <mach/keyscan.h>
+#include <media/tvp514x.h>
+
static inline int have_imager(void)
{
/* REVISIT when it's supported, trigger via Kconfig */
@@ -306,6 +308,73 @@ static void dm365evm_mmc_configure(void)
davinci_cfg_reg(DM365_SD1_DATA0);
}
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+ {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+ {
+ .input = INPUT_CVBS_VI2B,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+{
+ .input = INPUT_SVIDEO_VI2C_VI1C,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ },
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+ {
+ .name = "tvp5146",
+ .grp_id = 0,
+ .num_inputs = ARRAY_SIZE(tvp5146_inputs),
+ .inputs = tvp5146_inputs,
+ .routes = tvp5146_routes,
+ .can_route = 1,
+ .ccdc_if_params = {
+ .if_type = VPFE_BT656,
+ .hdpol = VPFE_PINPOL_POSITIVE,
+ .vdpol = VPFE_PINPOL_POSITIVE,
+ },
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+};
+
+static struct vpfe_config vpfe_cfg = {
+ .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+ .sub_devs = vpfe_sub_devs,
+ .i2c_adapter_id = 1,
+ .card_name = "DM365 EVM",
+ .ccdc = "ISIF",
+};
+
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
@@ -497,6 +566,8 @@ static struct davinci_uart_config uart_config __initdata = {
static void __init dm365_evm_map_io(void)
{
+ /* setup input configuration for VPFE input devices */
+ dm365_set_vpfe_config(&vpfe_cfg);
dm365_init();
}
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f53735cb922..ce9da43a628 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1008,6 +1008,97 @@ void __init dm365_init(void)
davinci_common_init(&davinci_soc_info_dm365);
}
+static struct resource dm365_vpss_resources[] = {
+ {
+ /* VPSS ISP5 Base address */
+ .name = "isp5",
+ .start = 0x01c70000,
+ .end = 0x01c70000 + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VPSS CLK Base address */
+ .name = "vpss",
+ .start = 0x01c70200,
+ .end = 0x01c70200 + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm365_vpss_device = {
+ .name = "vpss",
+ .id = -1,
+ .dev.platform_data = "dm365_vpss",
+ .num_resources = ARRAY_SIZE(dm365_vpss_resources),
+ .resource = dm365_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+ {
+ .start = IRQ_VDINT0,
+ .end = IRQ_VDINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_VDINT1,
+ .end = IRQ_VDINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+ .name = CAPTURE_DRV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(vpfe_resources),
+ .resource = vpfe_resources,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static void dm365_isif_setup_pinmux(void)
+{
+ davinci_cfg_reg(DM365_VIN_CAM_WEN);
+ davinci_cfg_reg(DM365_VIN_CAM_VD);
+ davinci_cfg_reg(DM365_VIN_CAM_HD);
+ davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
+ davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
+}
+
+static struct resource isif_resource[] = {
+ /* ISIF Base address */
+ {
+ .start = 0x01c71000,
+ .end = 0x01c71000 + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* ISIF Linearization table 0 */
+ {
+ .start = 0x1C7C000,
+ .end = 0x1C7C000 + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+ /* ISIF Linearization table 1 */
+ {
+ .start = 0x1C7C400,
+ .end = 0x1C7C400 + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+static struct platform_device dm365_isif_dev = {
+ .name = "isif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(isif_resource),
+ .resource = isif_resource,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = dm365_isif_setup_pinmux,
+ },
+};
+
static int __init dm365_init_devices(void)
{
if (!cpu_is_davinci_dm365())
@@ -1016,7 +1107,16 @@ static int __init dm365_init_devices(void)
davinci_cfg_reg(DM365_INT_EDMA_CC);
platform_device_register(&dm365_edma_device);
platform_device_register(&dm365_emac_device);
-
+ /* Add isif clock alias */
+ clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
+ platform_device_register(&dm365_vpss_device);
+ platform_device_register(&dm365_isif_dev);
+ platform_device_register(&vpfe_capture_dev);
return 0;
}
postcore_initcall(dm365_init_devices);
+
+void dm365_set_vpfe_config(struct vpfe_config *cfg)
+{
+ vpfe_capture_dev.dev.platform_data = cfg;
+}
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index f1710a30e7b..9fc5a64a536 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -18,6 +18,7 @@
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
+#include <media/davinci/vpfe_capture.h>
#define DM365_EMAC_BASE (0x01D07000)
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
@@ -36,4 +37,5 @@ void __init dm365_init_asp(struct snd_platform_data *pdata);
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
void __init dm365_init_rtc(void);
+void dm365_set_vpfe_config(struct vpfe_config *cfg);
#endif /* __ASM_ARCH_DM365_H */