Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...

1 files changed, 53 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap1106.txt
new file mode 100644
index 00000000000..4b463904cba
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cap1106.txt
@@ -0,0 +1,53 @@
+Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+
+The node for this driver must be a child of a I2C controller node, as the
+device communication via I2C only.
+
+Required properties:
+
+	compatible:		Must be "microchip,cap1106"
+
+	reg:			The I2C slave address of the device.
+				Only 0x28 is valid.
+
+	interrupts:		Property describing the interrupt line the
+				device's ALERT#/CM_IRQ# pin is connected to.
+				The device only has one interrupt source.
+
+Optional properties:
+
+	autorepeat:		Enables the Linux input system's autorepeat
+				feature on the input device.
+
+	microchip,sensor-gain:	Defines the gain of the sensor circuitry. This
+				effectively controls the sensitivity, as a
+				smaller delta capacitance is required to
+				generate the same delta count values.
+				Valid values are 1, 2, 4, and 8.
+				By default, a gain of 1 is set.
+
+	linux,keycodes:		Specifies an array of numeric keycode values to
+				be used for the channels. If this property is
+				omitted, KEY_A, KEY_B, etc are used as
+				defaults. The array must have exactly six
+				entries.
+
+Example:
+
+i2c_controller {
+	cap1106@28 {
+		compatible = "microchip,cap1106";
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 0>;
+		reg = <0x28>;
+		autorepeat;
+		microchip,sensor-gain = <2>;
+
+		linux,keycodes = <103		/* KEY_UP */
+				  106		/* KEY_RIGHT */
+				  108		/* KEY_DOWN */
+				  105		/* KEY_LEFT */
+				  109		/* KEY_PAGEDOWN */
+				  104>;		/* KEY_PAGEUP */
+	};
+}