Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "MFD bits for the 3.7 merge window.

  As usual we have a few new drivers:

   - TI LP8788
   - TI OMAP USB TLL
   - Maxim MAX8907
   - SMSC ECE1099
   - Dialog Semiconductor DA9055
   - A simpler syscon driver that allow us to get rid of the anatop one.

  Drivers are also gradually getting Device Tree and IRQ domain support.

  The following drivers got DT support:
   - palmas, 88pm860x, tc3589x and twl4030-audio

  And those ones now use the IRQ domain APIs:
   - 88pm860x, tc3589x, db8500_prcmu

  Also some other interesting changes:
   - Intel's ICH LPC now supports Lynx Point
   - TI's twl4030-audio added a GPO child
   - tps6527 enabled its backlight subdevice
   - The twl6030 pwm driver moved to the new PWM subsystem

  And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x,
  palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family."

Fix up various annoying conflicts: the DT and IRQ domain support came in
twice and was already in 3.6. And then it was apparently rebased.

Guys, DON'T REBASE!

* tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits)
  ARM: dts: Enable 88pm860x pmic
  mfd: 88pm860x: Move gpadc init into touch
  mfd: 88pm860x: Device tree support
  mfd: 88pm860x: Use irqdomain
  mfd: smsc: Add support for smsc gpio io/keypad driver
  backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe
  mfd: DA9055 core driver
  mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list
  mfd: wm5110: Add register patches for revision B
  mfd: wm5110: Disable control interface error report for WM5110 rev B
  mfd: max8907: Remove regulator-compatible from DT docs
  backlight: Add TPS65217 WLED driver
  mfd: Add backlight as subdevice to the tps65217
  mfd: Provide the PRCMU with its own IRQ domain
  mfd: Fix max8907 sparse warning
  mfd: Add lp8788 mfd driver
  mfd: dbx500: Provide a more accurate smp_twd clock
  mfd: rc5t583: Fix warning messages
  regulator: palmas: Add DT support
  mfd: palmas: Change regulator defns to better suite DT
  ...

9 files changed, 281 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644
index 00000000000..63f3ee33759
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+		- The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+				of one chip, and this property stores the I2C address of
+				another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+88pm860x-onkey		:		: On key
+88pm860x-rtc		:		: RTC
+88pm8607		:		: Regulators
+88pm860x-backlight	:		: Backlight
+88pm860x-led		:		: Led
+88pm860x-touch		:		: Touchscreen
+
+Example:
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+		interrupts = <4>;
+		interrupt-parent = <&intc>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		marvell,88pm860x-irq-read-clr;
+		marvell,88pm860x-slave-addr = <0x11>;
+
+		regulators {
+			BUCK1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		rtc {
+			marvell,88pm860x-vrtc = <1>;
+		};
+		touch {
+			marvell,88pm860x-gpadc-prebias = <1>;
+			marvell,88pm860x-gpadc-slot-cycle = <1>;
+			marvell,88pm860x-tsi-prebias = <6>;
+			marvell,88pm860x-pen-prebias = <16>;
+			marvell,88pm860x-pen-prechg = <2>;
+			marvell,88pm860x-resistor-X = <300>;
+		};
+		backlights {
+			backlight-0 {
+				marvell,88pm860x-iset = <4>;
+				marvell,88pm860x-pwm = <3>;
+			};
+			backlight-2 {
+			};
+		};
+		leds {
+			led0-red {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-green {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-blue {
+				marvell,88pm860x-iset = <12>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
new file mode 100644
index 00000000000..fe8150bb324
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/syscon.txt
@@ -0,0 +1,20 @@
+* System Controller Registers R/W driver
+
+System controller node represents a register region containing a set
+of miscellaneous registers. The registers are not cohesive enough to
+represent as any specific type of device. The typical use-case is for
+some other node's driver, or platform-specific code, to acquire a
+reference to the syscon node (e.g. by phandle, node path, or search
+using a specific compatible value), interrogate the node (or associated
+OS driver) to determine the location of the registers, and access the
+registers directly.
+
+Required properties:
+- compatible: Should contain "syscon".
+- reg: the register region can be accessed from syscon
+
+Examples:
+gpr: iomuxc-gpr@020e0000 {
+	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+	reg = <0x020e0000 0x38>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index db03599ae4d..2e3304888ff 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -59,6 +59,8 @@ Optional properties:
   in TPS6591X datasheet)
 - ti,en-gpio-sleep: enable sleep control for gpios
   There should be 9 entries here, one for each gpio.
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
 
 Regulator Optional properties:
 - ti,regulator-ext-sleep-control: enable external sleep
@@ -79,6 +81,8 @@ Example:
 		#interrupt-cells = <2>;
 		interrupt-controller;
 
+		ti,system-power-controller;
+
 		ti,vmbch-threshold = 0;
 		ti,vmbch2-threshold = 0;
 		ti,en-ck32k-xtal;
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
new file mode 100644
index 00000000000..414d2ae0adf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
@@ -0,0 +1,46 @@
+Texas Instruments TWL family (twl4030) audio module
+
+The audio module inside the TWL family consist of an audio codec and a vibra
+driver.
+
+Required properties:
+- compatible : must be "ti,twl4030-audio"
+
+Optional properties, nodes:
+
+Audio functionality:
+- codec { }: Need to be present if the audio functionality is used. Within this
+	     section the following options can be used:
+- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
+		    from the start of the recorded sample (in ms)
+-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
+-ti,hs_extmute: Use external mute for HS pop reduction
+-ti,hs_extmute_gpio: Use external GPIO to control the external mute
+-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
+		      valid values.
+
+Vibra functionality
+- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
+		   missing or it is 0, the vibra functionality is disabled.
+
+Example:
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+
+			ti,enable-vibra = <1>;
+
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index c855240f3a0..0f5dd709d75 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -1,7 +1,7 @@
 Texas Instruments TWL6040 family
 
-The TWL6040s are 8-channel high quality low-power audio codecs providing audio
-and vibra functionality on OMAP4+ platforms.
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
+vibra and GPO functionality on OMAP4+ platforms.
 They are connected ot the host processor via i2c for commands, McPDM for audio
 data and commands.
 
@@ -10,6 +10,8 @@ Required properties:
 - reg: must be 0x4b for i2c address
 - interrupts: twl6040 has one interrupt line connecteded to the main SoC
 - interrupt-parent: The parent interrupt controller
+- gpio-controller:
+- #gpio-cells = <1>: twl6040 provides GPO lines.
 - twl6040,audpwron-gpio: Power on GPIO line for the twl6040
 
 - vio-supply: Regulator for the twl6040 VIO supply
@@ -37,7 +39,6 @@ Example:
 &i2c1 {
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
-		reg = <0x4b>;
 
 		interrupts = <0 119 4>;
 		interrupt-parent = <&gic>;
@@ -60,3 +61,5 @@ Example:
 		};
 	};
 };
+
+/include/ "twl6040.dtsi"
diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt
new file mode 100644
index 00000000000..1267b3e1a2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt
@@ -0,0 +1,30 @@
+Marvell 88PM860x regulator
+
+Required properties:
+- compatible: "marvell,88pm860x"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the regulator-compatible
+  property, with valid values listed below.
+
+Example:
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+
+		regulators {
+			BUCK1 {
+			        regulator-min-microvolt = <1000000>;
+			        regulator-max-microvolt = <1500000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+			BUCK3 {
+			        regulator-min-microvolt = <1000000>;
+			        regulator-max-microvolt = <3000000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt
new file mode 100644
index 00000000000..371eccd1cd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8907.txt
@@ -0,0 +1,69 @@
+MAX8907 regulator
+
+Required properties:
+- compatible: "maxim,max8907"
+- reg: I2C slave address
+- interrupts: The interrupt output of the controller
+- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC.
+- in-v1-supply: The input supply for SD1.
+- in-v2-supply: The input supply for SD2.
+- in-v3-supply: The input supply for SD3.
+- in1-supply: The input supply for LDO1.
+...
+- in20-supply: The input supply for LDO20.
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+
+Optional properties:
+- maxim,system-power-controller: Boolean property indicating that the PMIC
+  controls the overall system power.
+
+The valid names for regulators are:
+
+  sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
+  ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
+  out33v, bbat, sdby, vrtc.
+
+Example:
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <0 86 0x4>;
+
+			maxim,system-power-controller;
+
+			mbatt-supply = <&some_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			...
+			in1-supply = <&mbatt_reg>;
+			...
+
+			regulators {
+				mbatt_reg: mbatt {
+					regulator-name = "vbat_pmu";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+				};
+
+				sd1 {
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sd2 {
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+...
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
index 07b9ef6e49d..8b40cac24d9 100644
--- a/Documentation/devicetree/bindings/regulator/tps6586x.txt
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -22,6 +22,10 @@ Required properties:
 - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
 - vinldo9-supply: The input supply for the LDO9
 
+Optional properties:
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+
 Each regulator is defined using the standard binding for regulators.
 
 Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
@@ -37,6 +41,8 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
+		ti,system-power-controller;
+
 		sys-supply = <&some_reg>;
 		vin-sm0-supply = <&some_reg>;
 		vin-sm1-supply = <&some_reg>;
diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
new file mode 100644
index 00000000000..261df279931
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt
@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - marvell,88pm860x-iset: Current supplies on backlight device.
+  - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+	backlights {
+		backlight-0 {
+			marvell,88pm860x-iset = <4>;
+			marvell,88pm860x-pwm = <3>;
+		};
+		backlight-2 {
+		};