Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...

7 files changed, 193 insertions, 5 deletions

diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 23584d0c6a7..f316d1816fc 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -32,3 +32,4 @@
  31 -> Leadtek Winfast PxDVR3200 H XC4000                  [107d:6f39]
  32 -> MPX-885
  33 -> Mygica X8507                                        [14f1:8502]
+ 34 -> TerraTec Cinergy T PCIe Dual                        [153b:117e]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index eee18e6962b..fa4b3f94746 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -59,7 +59,7 @@
  58 -> Pinnacle PCTV HD 800i                               [11bd:0051]
  59 -> DViCO FusionHDTV 5 PCI nano                         [18ac:d530]
  60 -> Pinnacle Hybrid PCTV                                [12ab:1788]
- 61 -> Leadtek TV2000 XP Global                            [107d:6f18,107d:6618]
+ 61 -> Leadtek TV2000 XP Global                            [107d:6f18,107d:6618,107d:6619]
  62 -> PowerColor RA330                                    [14f1:ea3d]
  63 -> Geniatech X8000-MT DVBT                             [14f1:8852]
  64 -> DViCO FusionHDTV DVB-T PRO                          [18ac:db30]
@@ -87,3 +87,5 @@
  86 -> TeVii S464 DVB-S/S2                                 [d464:9022]
  87 -> Leadtek WinFast DTV2000 H PLUS                      [107d:6f42]
  88 -> Leadtek WinFast DTV1800 H (XC4000)                  [107d:6f38]
+ 89 -> Leadtek TV2000 XP Global (SC4100)                   [107d:6f36]
+ 90 -> Leadtek TV2000 XP Global (XC4100)                   [107d:6f43]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index e7be3ac49ea..d99262dda53 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -7,7 +7,7 @@
   6 -> Terratec Cinergy 200 USB                 (em2800)
   7 -> Leadtek Winfast USB II                   (em2800)        [0413:6023]
   8 -> Kworld USB2800                           (em2800)
-  9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker  (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a]
+  9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker  (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a,093b:a003]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
  11 -> Terratec Hybrid XS                       (em2880)
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
@@ -61,7 +61,7 @@
  61 -> Pixelview PlayTV Box 4 USB 2.0           (em2820/em2840)
  62 -> Gadmei TVR200                            (em2820/em2840)
  63 -> Kaiomy TVnPC U2                          (em2860)        [eb1a:e303]
- 64 -> Easy Cap Capture DC-60                   (em2860)
+ 64 -> Easy Cap Capture DC-60                   (em2860)        [1b80:e309]
  65 -> IO-DATA GV-MVP/SZ                        (em2820/em2840) [04bb:0515]
  66 -> Empire dual TV                           (em2880)
  67 -> Terratec Grabby                          (em2860)        [0ccd:0096,0ccd:10AF]
@@ -76,7 +76,11 @@
  76 -> KWorld PlusTV 340U or UB435-Q (ATSC)     (em2870)        [1b80:a340]
  77 -> EM2874 Leadership ISDBT                  (em2874)
  78 -> PCTV nanoStick T2 290e                   (em28174)
- 79 -> Terratec Cinergy H5                      (em2884)        [0ccd:10a2,0ccd:10ad]
+ 79 -> Terratec Cinergy H5                      (em2884)        [0ccd:008e,0ccd:00ac,0ccd:10a2,0ccd:10ad]
  80 -> PCTV DVB-S2 Stick (460e)                 (em28174)
  81 -> Hauppauge WinTV HVR 930C                 (em2884)        [2040:1605]
  82 -> Terratec Cinergy HTC Stick               (em2884)        [0ccd:00b2]
+ 83 -> Honestech Vidbox NW03                    (em2860)        [eb1a:5006]
+ 84 -> MaxMedia UB425-TC                        (em2874)        [1b80:e425]
+ 85 -> PCTV QuatroStick (510e)                  (em2884)        [2304:0242]
+ 86 -> PCTV QuatroStick nano (520e)             (em2884)        [2013:0251]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index e7ef38a1985..34f3b330e5f 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -187,3 +187,4 @@
 186 -> Beholder BeholdTV 501                    [5ace:5010]
 187 -> Beholder BeholdTV 503 FM                 [5ace:5030]
 188 -> Sensoray 811/911                         [6000:0811,6000:0911]
+189 -> Kworld PC150-U                           [17de:a134]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 6323b7a2071..c83f6e41887 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -78,10 +78,11 @@ tuner=77 - TCL tuner MF02GIP-5N-E
 tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner
 tuner=79 - Philips PAL/SECAM multi (FM1216 MK5)
 tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
-tuner=81 - Xceive 4000 tuner
 tuner=81 - Partsnic (Daewoo) PTI-5NF05
 tuner=82 - Philips CU1216L
 tuner=83 - NXP TDA18271
 tuner=84 - Sony BTF-Pxn01Z
 tuner=85 - Philips FQ1236 MK5
 tuner=86 - Tena TNF5337 MFD
+tuner=87 - Xceive 4000 tuner
+tuner=88 - Xceive 5000C tuner
diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt
new file mode 100644
index 00000000000..eb049708f3e
--- /dev/null
+++ b/Documentation/video4linux/fimc.txt
@@ -0,0 +1,178 @@
+Samsung S5P/EXYNOS4 FIMC driver
+
+Copyright (C) 2012 Samsung Electronics Co., Ltd.
+---------------------------------------------------------------------------
+
+The FIMC (Fully Interactive Mobile Camera) device available in Samsung
+SoC Application Processors is an integrated camera host interface, color
+space converter, image resizer and rotator.  It's also capable of capturing
+data from LCD controller (FIMD) through the SoC internal writeback data
+path.  There are multiple FIMC instances in the SoCs (up to 4), having
+slightly different capabilities, like pixel alignment constraints, rotator
+availability, LCD writeback support, etc. The driver is located at
+drivers/media/video/s5p-fimc directory.
+
+1. Supported SoCs
+=================
+
+S5PC100 (mem-to-mem only), S5PV210, EXYNOS4210
+
+2. Supported features
+=====================
+
+ - camera parallel interface capture (ITU-R.BT601/565);
+ - camera serial interface capture (MIPI-CSI2);
+ - memory-to-memory processing (color space conversion, scaling, mirror
+   and rotation);
+ - dynamic pipeline re-configuration at runtime (re-attachment of any FIMC
+   instance to any parallel video input or any MIPI-CSI front-end);
+ - runtime PM and system wide suspend/resume
+
+Not currently supported:
+ - LCD writeback input
+ - per frame clock gating (mem-to-mem)
+
+3. Files partitioning
+=====================
+
+- media device driver
+  drivers/media/video/s5p-fimc/fimc-mdevice.[ch]
+
+ - camera capture video device driver
+  drivers/media/video/s5p-fimc/fimc-capture.c
+
+ - MIPI-CSI2 receiver subdev
+  drivers/media/video/s5p-fimc/mipi-csis.[ch]
+
+ - video post-processor (mem-to-mem)
+  drivers/media/video/s5p-fimc/fimc-core.c
+
+ - common files
+  drivers/media/video/s5p-fimc/fimc-core.h
+  drivers/media/video/s5p-fimc/fimc-reg.h
+  drivers/media/video/s5p-fimc/regs-fimc.h
+
+4. User space interfaces
+========================
+
+4.1. Media device interface
+
+The driver supports Media Controller API as defined at
+http://http://linuxtv.org/downloads/v4l-dvb-apis/media_common.html
+The media device driver name is "SAMSUNG S5P FIMC".
+
+The purpose of this interface is to allow changing assignment of FIMC instances
+to the SoC peripheral camera input at runtime and optionally to control internal
+connections of the MIPI-CSIS device(s) to the FIMC entities.
+
+The media device interface allows to configure the SoC for capturing image
+data from the sensor through more than one FIMC instance (e.g. for simultaneous
+viewfinder and still capture setup).
+Reconfiguration is done by enabling/disabling media links created by the driver
+during initialization. The internal device topology can be easily discovered
+through media entity and links enumeration.
+
+4.2. Memory-to-memory video node
+
+V4L2 memory-to-memory interface at /dev/video? device node.  This is standalone
+video device, it has no media pads. However please note the mem-to-mem and
+capture video node operation on same FIMC instance is not allowed.  The driver
+detects such cases but the applications should prevent them to avoid an
+undefined behaviour.
+
+4.3. Capture video node
+
+The driver supports V4L2 Video Capture Interface as defined at:
+http://linuxtv.org/downloads/v4l-dvb-apis/devices.html
+
+At the capture and mem-to-mem video nodes only the multi-planar API is
+supported. For more details see:
+http://linuxtv.org/downloads/v4l-dvb-apis/planar-apis.html
+
+4.4. Camera capture subdevs
+
+Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device
+node is also created per each available and enabled at the platform level
+MIPI-CSI receiver device (currently up to two).
+
+4.5. sysfs
+
+In order to enable more precise camera pipeline control through the sub-device
+API the driver creates a sysfs entry associated with "s5p-fimc-md" platform
+device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode.
+
+In typical use case there could be a following capture pipeline configuration:
+sensor subdev -> mipi-csi subdev -> fimc subdev -> video node
+
+When we configure these devices through sub-device API at user space, the
+configuration flow must be from left to right, and the video node is
+configured as last one.
+When we don't use sub-device user space API the whole configuration of all
+devices belonging to the pipeline is done at the video node driver.
+The sysfs entry allows to instruct the capture node driver not to configure
+the sub-devices (format, crop), to avoid resetting the subdevs' configuration
+when the last configuration steps at the video node is performed.
+
+For full sub-device control support (subdevs configured at user space before
+starting streaming):
+# echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
+
+For V4L2 video node control only (subdevs configured internally by the host
+driver):
+# echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
+This is a default option.
+
+5. Device mapping to video and subdev device nodes
+==================================================
+
+There are associated two video device nodes with each device instance in
+hardware - video capture and mem-to-mem and additionally a subdev node for
+more precise FIMC capture subsystem control. In addition a separate v4l2
+sub-device node is created per each MIPI-CSIS device.
+
+How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which
+device?
+
+You can either grep through the kernel log to find relevant information, i.e.
+# dmesg | grep -i fimc
+(note that udev, if present, might still have rearranged the video nodes),
+
+or retrieve the information from /dev/media? with help of the media-ctl tool:
+# media-ctl -p
+
+6. Platform support
+===================
+
+The machine code (plat-s5p and arch/arm/mach-*) must select following options
+
+CONFIG_S5P_DEV_FIMC0       mandatory
+CONFIG_S5P_DEV_FIMC1  \
+CONFIG_S5P_DEV_FIMC2  |    optional
+CONFIG_S5P_DEV_FIMC3  |
+CONFIG_S5P_SETUP_FIMC /
+CONFIG_S5P_SETUP_MIPIPHY \
+CONFIG_S5P_DEV_CSIS0     | optional for MIPI-CSI interface
+CONFIG_S5P_DEV_CSIS1     /
+
+Except that, relevant s5p_device_fimc? should be registered in the machine code
+in addition to a "s5p-fimc-md" platform device to which the media device driver
+is bound.  The "s5p-fimc-md" device instance is required even if only mem-to-mem
+operation is used.
+
+The description of sensor(s) attached to FIMC/MIPI-CSIS camera inputs should be
+passed as the "s5p-fimc-md" device platform_data.  The platform data structure
+is defined in file include/media/s5p_fimc.h.
+
+7. Build
+========
+
+This driver depends on following config options:
+PLAT_S5P,
+PM_RUNTIME,
+I2C,
+REGULATOR,
+VIDEO_V4L2_SUBDEV_API,
+
+If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m)
+two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and
+optional s5p-csis.ko (MIPI-CSI receiver subdev).
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index f2060f0dc02..e6c2842407a 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -217,6 +217,7 @@ ov534_9		06f8:3003	Hercules Dualpix HD Weblog
 sonixj		06f8:3004	Hercules Classic Silver
 sonixj		06f8:3008	Hercules Deluxe Optical Glass
 pac7302		06f8:3009	Hercules Classic Link
+pac7302		06f8:301b	Hercules Link
 nw80x		0728:d001	AVerMedia Camguard
 spca508		0733:0110	ViewQuest VQ110
 spca501		0733:0401	Intel Create and Share